Format hardrive on imac with 10.7.5

How do I format my imac hardrive using 10.7.5

If you mean the boot drive, you can format the boot partition, the one on which the system is installed, by booting to the Recovery Partition and running Disk Utility. If you want to repartition and erase the entire drive, you'll have to use OS X Internet Recovery. See:
http://support.apple.com/kb/HT4718
Regards.

Similar Messages

External hardrive to use with Imac - how to format and to what?

i have my external hardrive i use with my pc
how and to what should i format it so i can use ut with leopard and timemachine, also is it possible to make 2 partiton on it so one partition
would still be windows format so i can backup windows on it too?

If you have an Intel Mac do this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to two and resize as desired using the sizing gadget. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the PC volume you just created (this is a sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window. Set the format type to MSDOS (FAT32) from the Format drop down menu. Click on the Erase button.
5. Select the OS X volume you just created (this is the other sub-entry under the drive entry) from the left side list. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
You should now be able to use the drive on both platforms. One partition for OS X and the other for Windows.

Receive an A12E1 Error Code when trying to update Photoshop CC. Running an iMac with 10.7.5. My OS Drive is formatted to Mac OS Extended (journaled). Any suggestions?

Receive an A12E1 Error Code when trying to update Photoshop CC. Running an iMac with 10.7.5. My OS Drive is formatted to Mac OS Extended (journaled). Any suggestions?

A12E1 download & install error http://forums.adobe.com/thread/1289484
-more A12E1 discussion http://forums.adobe.com/thread/1045283?tstart=0
Case sensitive https://forums.adobe.com/thread/1483096 may also help... or may not, I'm on Windows

? on Using which format of Audio Interface with a Imac i3

Hi,
I have been reading and reading about this topic. My (R.I.P.) eMac has been replaced by a very nice and fast Intel i3 Imac with FW800 and plenty of USB 2.0 and SP/Dif (even)
Fortunately most all of any music gear that needed driver or firmware updates for Snow Leopard had them available, but my Tascam US-120 (USB 1.1) does not so have been looking at USB 2.0 (though its amazing how many USB 1.1 USB Audio Interfaces are still be produced and at $$$ prices. Firewire Audio Interfaces are at FW 400 and with a Firewire 800 port on the back of the iMac appears ? that a interface cable is the required or ? only way to use a Firewire interface 1) I want to make sure I am understanding this correctly, and 2) is this safe ? to do 3) I am getting a FW 800 Extrenal Hard Drive so that is a match, 7200RPM,
I do plug in to the Interface (or did) at times 2 microphones XLR type (to put mic's on a amplifier) , a Electric Guitar , or a Acoutsic Electric Guitar in to the interface or record it with a mic's, I have a MIDI Keyoard that has MIDI in-out as well as USB in, and also plugged two power monotors(Linear Flat Speakers) in to the out puts of the previous Audio Interface.
Last Question I reviewed the bit/kHz of the USB 1.1 interfaces and they range from 16 bit//48 kHz,24bit 44.1kHz, to 24bit 48kHz to 24bit 96kHz (on a USB 1.1 connection from the particular USB audio Interfaces when you find a USB 2.0 modem the max bit rate is 24 and the kHz (ranges from 96 kHz to 192 kHz) I am not a electronics genius
but have recorded music in to computers for over 6+ years and the Resolution rates of the USB 1.1 do not make sense to me (I realize that MP3 (being compressed) and CD quality recordings are only so high but..
I am going to (later) update to Ilife 11 with Garageband 11' which can record up to the 24 bit range so that is a consideration as well
The FW 400 resolution rates in the chart I have are a minimum of 24 bit and kHZ range of 96 kHz to 192 kHz . and in theory USB 2.0 is a bit faster at 480 mbs versus FW 400
at 400 mbs and from what I have learned USB 1.1 is slowest, I guess I am missing something, over thinking this or. Just want to do it safely, and get all of the inputs and out puts I need (I can even use the SP/Dif that comes on alot of Audio Interfaces, The AES Audio Engineers Society just wrapped up a convention and have been looking at their site and new product releases.
Any Input would be greatly appreciated and I wish I could write less and explain more!
David
ambienttales

If you can stretch your budget (quite a bit actually, but you can find deals on the net) I can't recommend the RME Fireface 800 models enough. Lots of I/O, never EVER had a crash, and the drivers and tools are rock solid. RME also makes a FF400 which has less I/O, but also costs less. The sound is steller, and it has no discernable noise. These are Firewire interfaces, but they just camme out with one that also talks USB.
Pete

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

I just purchased an IMac with lion and I tryed to install an old math program that is for winmac running systems. When I try to boot the cd it comes up with a notepad window with a bunch of weird symbols and codes but the program will not start up.

I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.

Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more.

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

I purchased a new iMac with latest iLife suite, however, IMovie will not read my videos. I deleted a 3iVX file that was not working but nothing happens now. Help

I just purchased a new iMac with the latest iLife suite. As part of the migration process in setting up the new machine the 3Ivx video codec was brought onto the new machine as well as my old movies. When I tried opening the movies iMovie crashed and told me it had a problem with the 3IVX video codec, in doing some research I found that the 3IVX video codec created a problem so I deleted it and downloaded Perian 123. The Perian 123 works well with Quicktime but iMove does not now see my old movies. At this point I cannot open any of my movies. Can anyone help? Thanks

There also might be a more updated, compatible 3ivx codec you can install, or just try re-installing a newly downloaded version of of the same old codec: http://www.3ivx.com/download/macos.html
Otherwise download and install MPEG Streamclip: http://www.squared5.com/svideo/mpeg-streamclip-mac.html
In iMovie hold down CTRL and click on the clips that don't open. Choose Reveal in Finder. Convert those files by dragging them into the window of converter program, and save as Apple Intermediate Codec (AIC). That format is native to iMovie and will work perfectly.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad and getting the phoos o my IMac. ou see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b

The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats.

Is it possible to use Snow Leopard on Mountain Lion iMac with Virtualbox ?

I've been lucky recently, with people giving the perfect solutions for me so I try again.
But, this one is a tough one: How to run a virtual Snow Leopard on a new iMac ?
I got a 2013 iMac with Mountain Lion (10.8.5 now) so, totally incompatible with Snow Leopard. I need SL anyway.
Give up all you old applications and buy new ones is not acceptable. First, this is not my way of thinking and, second, some cannot be replaced.
Many posts say that you can use Snow Leopard with VirtualBox but I could not find anywhere the "how to" (in this particular configuration).
For instance, I followed these 2 protocols, almost similar:
http://www.maketecheasier.com/install-mac-os-x-snow-leopard-in-virtualbox-on-win dows/
http://www.macbreaker.com/2012/02/snow-leopard-virtualbox.html
but they use Windows as host system and something is not working (for me) with Mountain Lion.
I made many attempts, with VirtualBox 4.2.18, using pretty much everything: Snow Leopard DVD, SL Server DVD, .dmg of both. I've also got Combo 10.6.8 updates for both (but I'm not sure if it can be used before installing). With another MacBook, I managed to install a SLS on external hard drive and update to 10.6.8. Was unable to use it anyway.
Inevitably, I ended up with the message:
"FATAL: No bootable medium found! System halted."
I have no idea of what support to use and even, probably important, if it should be set on Primary or Secondary Master ? (in Settings / Storage)
Is it possible at all ???
Would it work better with VMware Fusion ? Anybody successful ?
Help
Thanx

How to install and run OS 10.6 Snow Leopard on a virtual machine on top of OS 10.7 Lion:
http://osxdaily.com/2011/11/17/install-run-mac-os-x-10-6-snow-leopard-in-virtual -machine-on-lion/
From kappy:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
         optical drive and restart the computer. After the chime press and hold down the
         "C" key. Release the key when you see a small spinning gear appear below the
         dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, set the format type to Mac
         OS Extended (Journaled, if supported), then click on the Partition button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will require a restart after
         which you will be running a fresh install of OS X. You can now begin the update
         process by opening Software Update and installing all recommended updates to
         bring your installation current.
First you will have to prep your new SSD:
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

Backup a dual boot iMac with OSX + Vista to Time capsule and USB hard drive

I have just bought a Time Capsule which is now working as my WiFi Network base station and backs up an iMac and a Macbook. The iMac has both OSX and Vista (using Boot Camp) and I was using a USB Hard Drive that has 2 partitions (HFS+ for the Mac; NTFS for Vista) to back up the iMac. Rather than leave this attached to the iMac just to back up the Vista partition I would like to move it to the Time Capsule's USB port and use it as NAS. The idea being that it becomes a NAS with one partition used to back up the Windows data when I run the iMac with Vista and the other partition to archive the Time Machine backups from both the iMac and Macbook. I tried to connect it as it was but got an error and reading the forum it seems that it won't work unless both partitions are HFS+ or FAT. If I reformat the NTFS partition to HFS+ will I be able to use the built in backup function of Vista to back up the Vista partition to the USB hard drive? I read somewhere else that Time Capsule takes care of the formatting for an external NAS drive and Windows will be able to read and write to it even though it's not NTFS. Any ideas comments appreciated.

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

IMac with SSD and Hard drive very slow startup time

I have a new mid 2011 iMac with a 250gb SSD drive and a 2TB drive. All are from Apple as BTO options. When I first used the iMac my typical startup time from the hardware check chime to desktop was typically 12 seconds. Something, somehow has been changed because now it takes over one minute to boot up from the SSD. After the chime I hear the fans running and also the 2tb drive. After about 20 seconds I hear the hard drive spin down and then after another 20 seconds it starts up again. Once it starts up the boot up sequences contiunes and returns to the desktop. After this the iMac perfprms as normal. I have tried running disk utility from the recovery partition. I have also reinstalled Lion as well from the recovery partition and neither of these change the outcome.
When I first got the iMac I used time machine to restore from a previous machine into the 2tb partition and then went into advanced options in System preferences>Users&Groups to point to my home folder on the 2Tb drive rather than the default one on the SSD. That was working fine until I discovered software problems with both Preview and Textedit where they would not start up with this arangement. I then repointed my home folder to the default one on the SSD which cured this issue with these programmes leaving my data remaining on the 2Tb drive. Since doing this I have had the one minute boot up problem.
Can anyone offer any advice as to how I may overcome this problem and get my iMac back to starting up in twelve seconds from the SSD as it did before. Any help would be appreciated on this topic.
Thanks.

Where do you maintain your Home folder - on the SSD or on the HDD?
If you want to do a clean install (from scratch) then do the following:
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Before you go to the extreme of the above would you do this:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Just in case your system slowness is due to something eating up CPU time. Oh, and if your system is brand new check the upper right corner of the menubar for a "dot" inside the Spotlight glass. This means Spotlight is indexing the drive. Until it finishes your system will be quite sluggish.

HT4818 I have a new IMac with an external disk drive, it won't instal bootcamp

I have a new IMac with an external disk drive, it won't instal bootcamp because the windows 7 disk in the mac drive is the wrong format.. how do I instal bootcamp with windows 7 from the disk I have?

I forgot to mention I have the fusion drive. I see now there is a problem loading windows in bootcamp with the fusion drive..

HT3805 How do I restore Vault created under Snow leopard to new IMac with Maverick 10.9.2

Purchased a new IMac with OS 10.9.2
trying to restore an Aperture Vault (created by snow leopard) I get error message that Vault could not be restored because it was created by older OS.
Is there a fix for this or do I kiss my 4k pics goodbye - I hope this isn't the case.

Purchased a new IMac with OS 10.9.2
trying to restore an Aperture Vault (created by snow leopard) I get error message that Vault could not be restored because it was created by older OS.
What exactly is the error message? The operating system version should not matter, when restoring from a vault. What however will matter, are the version of Aperture and the file system of the disk with the vault. Is your vault on an external drive? If yes, how is the drive formatted? If the vault is not on a drive formatted MacOS Extended (Journaled), move it to a disk with the correct formatting and try again.
And what version of Aperture created your vault? With SnowLeopard you probably used an older Aperture version. Then your vault needs to be upgraded to a newer Aperture version, before you can restore from it. Do you still have a version of Aperture installed, that is the same version as your vault? Was it an Aperture 3 version?
If your vault is an Aperture 3 vault, try to open it as an Aperture library instead of restoring it.
- a quick and dirty emergency measure: Try to open your vault directly on the drive where it is now without restoring it. Make a backup copy of your vault, before you try it.
Change the filename extension of your vault to ".aplibrary", this will turn the vault into an Aperture library and try to open it directly in Aperture by double clicking it.
Aperture will now try to open the vault as the current Aperture library and upgrade it.
“Aperture Vault” was created by an older version of Aperture, and cannot be restored by this version.

Format hardrive on imac with 10.7.5

Similar Messages

Maybe you are looking for