Format in Report Schedulling

Hi Gurus,
I am using Report Scheduling Functionality of SAP. But the report which i am getting is not in appropriate format.
Please tell how can i change the layout of Scheduled report which can be fitted in Excel?/
Please revert asap.
Thank You

Hello,
Please describe more what is the transaction code you are using, what is the output etc.
What error it is giving when downloaded to excel.
Regards,
Ravi

Similar Messages

Report Scheduling Excel/PDF format Parameters field empty

Hi all,
i have a question on report scheduling.
I'm scheduled a report with prompt and will send out the report as Excel format through SMTP emailing.
When i look on the History of the report, it shows the instance, but for the field Parameters it appear empty. I tried to reschedule the report with Webi format and check on the Parameters field in the History, and the Parameters field for Webi format is showing the prompt value i set.
The link below show the picture :
[http://i642.photobucket.com/albums/uu144/stevesiow/BO.jpg|http://i642.photobucket.com/albums/uu144/stevesiow/BO.jpg]
i am curious the different of paramenters field showing for different format of file emailing out.
Thanks for advise.
Regards,
Steve

Steve,
Seeing this in .Net 3.1 InfoView. I fired up JAVA InfoView and the parameters all show up. Another bug in 3.1.

Report Scheduling. How to syncronize the GMT and the local server timezones

Hi everybody, I need to schedule reports using the Schedule tab on BIP, but I didn't still understand how the syncronization between my server's timezone and the GMT timezone works.....
I noticed that when I open the Report Schedules initial page, this is refreshed using the GMT timezone as follows:
Page Refreshed Monday, July 26, 2010 7:53 AM GMT
Actually I'm located in Athens (GMT+3)
I noticed that if I want to Run once a report, ONLY the GMT is took in consideration.
For example, I want to run a report at 11.30 (Athens timeone) where the time conditions are the following:
BIP time (GMT timezone): 08.00 AM GMT
server timezone: 11.00 AM (Athens time)
So, if I want to run a report at 11.30 AM (Athens time), I have to write in BIP (Run once) 08.30 AM, instead of 11.30, otherwise if I put 11.30, the report runs 3 hours and 30 minutes later instead of only 30 minutes !!! This is very frustrating....because it means that everytime I need to remember that there is a difference of 3 hours and if I want effectively....
I also set the Report Formatting Time Zone = GMT+03:00 to fill the gap between the GMT's timezone and Athens's timezone but it didn't work....
I found that the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> is set into the tmpl.xsl; I tried to change it (GMT+3 or GMT+03:00), I stop and restart the BIP server....but nothing...the BIP timezone is always GMT (as showed by th Page Refreshed date and time).
At the end my question is this: is there a way to modify the internal BIP timezone in order to fill the gap between this and the server timezone ?
In other words, I'd like to see the page refreshed with the server timezone (Athens timezone) and not the GMT timezone, in order to schedule reports thinking directly my local server timezone (and not think always to calculate how many hours is the difference).
This, I think is a common issue for everybody, but....I didn't find nothing in the forum....
If somebody found a workaround, every help will be appreciated.
Thanks
Alex

Good Morning Vetsrini,
I know that the "Report Formatting Time Zone" is used to set the timezone properly INSIDE the report...but my attention now is concentrated on the Scheduling...
As I mentioned before I'd like to find a way to syncronize the BIP timezone (based on GMT) and my local server timezone (Athens, GMT+2), and this I think it's possiblie only if I can modify the BIP timezone (GMT): instead to have GMT, I'd like to have GMT+2 in order to have the same time in both of systems.
I already tried to change the variable <xsl:param name="_XDOTIMEZONE">GMT</xsl:param> into the tmpl.xsl, but it didn't work....
I don't understand how all the others millions of BIP users who don't live in UK can use the scheduler keeping in mind always the gap between their local time and the GMT time set in BIP......
Do you have another hint or workaround ?
Thanks for your help
Alex

IR reports scheduled in workspace doesnt send out emails.

Hello Everyone,
Please input your experinces or valuble suggestions for our issue.
We have several Interactive reports scheduled through the Hyperion Workspace and the scheduler sends out the generated reports to the users via emails in excel, PDF, web archive and MHTML.
Recently some users are complaining that they are not receving the reports though there emails are in the distribution list. My email is also attached to the distribution list and I receive the reports without any issue. I have checked the log and its shows that job went successfully without any errors and also displays that particluar user's emails too.
I also get a notification to my email everytime the job runs and it is successfull all the time.
We are unable to figure out why this is happening to only particluar users.
Any ideas? Anybody experienced the same issue? We are on version 11.1.2.1.
Jay.

Hi,
I have changed the order of the distribution list and waiting for a confirmation from the users but we are having a new issue.
One of the scheduled job is not sending out the emails to anyone. I tried to run the report manually and it runs perfectly. Right now we are exporting the file in the format 'Microsoft Office Web Archive.'
The scheduler was running perfectly untill 5/18 but didnt sendout after 5/18. I have ran report manually and exported as Web Archive and observed that the file size is 17MB. I have checked the previous outputs and all were under 11MB from the time since it was scheduled.
I suspect this is because of the file size. I have also did a trail run by changing the export option from Web Archive to Excel and it did send out the report and excel file size was 3MB.
Any ideas on this limitation? We are on version 11.1.2.1.
.

Agent Report schedule

Hi
Could you please suggest me below issues.
I have reports(may be 10 to 100).We are using OBIEE11.1.1.6.6 in Linux box.In OBIEE server BOX have the mutiple directory like IN.US.UK.SG.MY----------country wise.
Now when i schedule a report(Report have the all country information),i have to send this report into multiple folder but country wise.Each day i have to send report name with date.
E.g
Sample1
MY---100
MY--2000
SG----333
IN---200
Now above report when i schedule this should be send 3 directory IN,MY,SG based on country wise.
When i check my folder it should be (2 formates each report pdf and xls)
IN folder-->Sample1_27_06_2013.pdf,Sample1_27_06_2013.xls
SG folder-->Sample1_27_06_2013.pdf,Sample1_27_06_2013.xls
MY folder-->Sample1_27_06_2013.pdf,Sample1_27_06_2013.xls
Thanks
raj

If you're going to schedule your SSRS jobs using the agent, don't schedule them in SSRS using subscriptions as well...
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.

Changing date format at reporting level

Hello,
Will u plz tell me how can i change the date format at reporting level?
I want to display date in dd/mm/yyyy, but by default its showing mm/dd/yyyy.
Delta is already loaded in the system, so i don't want to disturb regular data loading.
Is there any way so that i can change the format of date.
Plz help me out.
Thanks,
Regards,
Steve

Hi steve
There r so many postings on the same topic
go through these previous threads
date format
Date format
u can find solution
regards
Ravi Kiran

Is it possible to display keyfigures in italics format in report output

Hi All,
Is it possible to display keyfigures in italics and bold format in report output?
Thanks,
Sri Arun Prian

you can edit the CSS - there is a CSS class assigned to the key figures.... this is for WAD....
Edited by: Arun Varadarajan on Feb 5, 2009 2:43 PM

How to print formated data/report on client's printer (Web Application)

Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
Application is web based
Technology used are Java - jsp - servlets
i want functionality like...
when user click on print button/link, data is fetched from server and all pages (it is formated data so i want alignment on page while printing) should be printed one after another.
Also printer selection dialog should displayed one time when user click on print button/link.
Questions:
1. How i will transfer all data to client (web browser) from the server ??
2. And how i can print that data on user's printer ??
There is requirement (or limitation) that I can not use applet for this purpose.
And also it is not fix that we must use java tech., we can use any othere tech. but condition is that it must support multiple platform (in short platform indipendant)
There is solution like ...
I can use window.print() function of DOM/JavaScript,
but it prints only one page which is displayed on browser.
I don't want to display any page. and want to print all pages.
if any one done or have idea then let me know.
Thanks in Adv.
Shailesh Koradiya

thanks linxpda for reply,
we can use ActiveX component for windows platform for printing purpose, same way we can use platform specific component for printing... (for linux, unix, sun solaris etc...)
if it is possible then let me inform.
Thanks,
Shailesh Koradiya

Error on open the Report Schedule Page from other application

Hi,
I want to open the only "Report Schedule Page" of the InfoView from my application. For this I am using the following url -
http://servername:8080/businessobjects/enterprise115/desktoplaunch/InfoView/CrystalEnterprise_Report/schedule/get.do?objId=526
The problem I am facing is that sometime the Report Schedule Page open successfully and sometimes it gives the following error -
HTTP Status 400 - Invalid path /InfoView/InfoView/logon/logon was requested
type Status report
message Invalid path /InfoView/InfoView/logon/logon was requested
description The request sent by the client was syntactically incorrect (Invalid path /InfoView/InfoView/logon/logon was requested).
Apache Tomcat/5.0.27
Please help me in resolving this issue?
Thanks,
Vicky

Hi,
first of all it is neither supported nor recommended to embed or call single components or pages of InfoView in other applications. You would have to write your own schedule page using the BO SDK.
The problem you are facing looks like the component you are calling does not get or find a valid session to the BOE system in the desired place. But even if it would (sometimes you are seeing that) I doubt that it would work to schedule a report using this mechanism as the further requests when pressing the OK button will call other parts of InfoView then, which will probably cause other problems. So try to use another solution as stated above.
Regards,
Harald

How to generate oracle report output in a comma separated format in reports

Pls any one can help in generation of oracle report in comma separated format in reports 10g.....
thanks,
prasad.
1,Chennai,Nokiasiemen,Convent junction,5535

Use desformat=delimited.
http://download.oracle.com/docs/cd/E15523_01/bi.1111/b32122/orbr_howto007.htm#i1040102

Crystal report scheduling error

Hello,
We are getting this error Intermittently, "login error. [CrystalEnterprise.DiskUnmanaged]: [Logon failure: unknown user name or bad password.]" when we schedule crystal report to file location. I had checked the user name and password and access to the file location, they are fine. We have scheduled this report to run daily, but somedays it throws the above error and somedays it runs fine. Any ideas please?
Thanks,

Rakesh,
Issue has been resolved in below forum, please check
CrystalEnterprise.DiskUnmanaged: Logon failure
Crystal Report Scheduling Destination Options in Infoview
Regards,
Arjun

How to print formatted data / report on user's printer in Web Application

Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
application is web based and tech. used are Java - jsp - servlets
now prob. is ...
how i will transfer all data to client (web browser) from the server and how i can print that data on user's printer ...??
there is requirement that I can not use applet for this purpose.
if any one done or have idea then let me know.
thanks
Shailesh Koradiya

Hi
Its simple, first of all break ur data in terms of pages. Write the logic in one JSP.
suppose i have jsp PrintReport.jsp , for page 1 url will PrintReport.jsp?page=0 ... so on
get the page parameter in JSP
String page="";
if(request.getParameter("page")!=null)
page=request.getParameter("page");
get the rowcount from the Result and assume records per page is 100
if u have 1000 rows then 10 pages u have to serve
StartRowNumber=page*recordsPerPage
EndRowNumber=StartRowNumber+recordsPerPage
Execute a SQL query , select * from table where rownum between
StartRowNumber and EndRowNumber
Provide google like pageNumbers in ur HTML page
ie 1 2 3 4 5 6 ..10
Regarding printing , Create HTML button called 'print' and add Javascript ' window.print()' on clicking it.
Hope it would solve ur problem
Cheers
Rajendra Bandi

Vertical allignment of columns in tabular format of report in obiee 10g

Hi,
I have a client requirement in which the colums are to be alligned vertically instead of being displayed horizontallty which is the default format in obiee.
Can anyone help me in achieving this requirement .
below goes the format of report we need in our project :
Column Name Value
Trade Summary:
Counterparty:     [Counterparty Name]
Trade ID/ Global ID:      [Trade ID / Global ID]
Trade Date:     [MM/DD/YYYY]
Settlement Date:     [MM/DD/YYYY]
Notional:     [CCY2] [Notional] <- show the non delivery currency
Thanks,
Mayuri Shah

Hi,
Change the columns as rows and rows as columns in the pivot view properties.You can display all the columns as rows and data as columns.
If you want display the column data in sections place required columns in section .
mark if helpful/correct..
thanks,
prassu

How to send the output to PDF format in reports 6i?

Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
Kavitha

Hello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards

How can we know the format of report

Developed a web application using java SDK.
How can we know the format of report that is is it a crystal report , PDF or excel or hyperling.
If it is crystal report then i use openDoc and the report is opened but if its a hyperlink or PDf i am not able to open the report .
Please help.
Thanks

Check the si_kind or so_progid property of object. You can use oInfoObject.getKind() to retrieve that.
a crystal report would return crystalreport a pdf would return pdf etc.

Format in Report Schedulling

Similar Messages

Maybe you are looking for