Format it once again??
can i hav the solution please??
what's wrong with my another hp notebook..
it can't use well..it says..boot device not found..do i have to format it again..
hope not so because all my documents will lost..
help me please
Turn OFF the Notebook and once its powered ON, keep Pressing F10 to load BIOS screen of the Notebook. In this screen under Diagnostics, run the test on hard drive and memory. Post back the results here.
Also in startup menu there is an alternate way where you can run F2 (System Diagnostics). The instructions can be found at below link
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01443317
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!
Similar Messages
-
hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit
This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
But aren't Macs supposed to "Just Work"? Not in this case. -
Once again, I need help...I'm starting to hate this board
Ok, I'm going to start from the beginning. When I first built this computer last year, (specs at the bottom) everything ran seemlessly. I upgraded to WinXP and no problems. Then my hardrive started screwing up around mid-summertime. The computer would freeze, crash, ect. Various things. After doing some research, running diagnostics and calling IBM, it was decided that the drive had gone bad. So I took it out, and bought a new western digital. After installation of the drive, and installing XP on the newly formatted drive, I expected everything to work fine. It didn't. First, there were blue and black screens of death. Sometimes the blue screens would mention something about IRQ's not less or equal, sometimes something else. Sometimes the computer would just restart for no reason. So I reformatted again. This fixed the blue screen problem and for about a day, everything (I thought) was cool. Think again. To start, I couldn't run any 3d application for an extended period of time without it freezing. And if I set the CPU to 1.2 ghz (where it should be!) it gets even worse. I even tried uping the voltage a little. No help. Sometimes the computer would just (once again) restart for no reason. Especially while using winamp. I tried different drivers, different bioses, readjusting my fan on my cpu, running memtest86 (which showed the memory to be fine). I have read through MANY threads on the forums and tried many other things, with no luck. The current situation, after attempting to install WinXP servicepack 1 is that I cant even load Windows. It always gets to the point where the blue bar is moving across while it says WinXP, and then the computer restarts. I ran tests to check how the powersupply was running during use, nd all the numbers looked good. The thing that really pisses me off, is that everything use to work fine, before the IBM drive crashed. Guys, I need some expertise and a Beer. I can do the second one myself and will gladly get a case for whoever can help me straighten this out! Even if I just have some part that needs replaced, I just need answers! Thanks guys!
Athlon 1.2 ghz 266fsb
Msi nforce k7n420pro
300W powersupply
Integrated graphics
256 mb Crucial memory
yamaha 24x burner
kenwood 52x cdrom
floppy drive
d-link wireless network card (could this be a problem? I was having problems before I got this card)All these guys with there power supply is a bunch of bunk and the combine this and that. a decent 300w psu will run the nforce with onboard vid or a geforce 3 easely. and forget all the combined crap.
Heres what my 300watt power could handle before I gave it to my kid.
MoBo.
1900xp
Geforce3
Scsi card
Modem
2- IBM 60 GB 7200rpm
Cold cathode ray tube 12"
CD ROM
Smart media reader
And whatever else I plugged into the usb port and the only time I ever had Maveric's problem, which I had the same thing was when switch system driver from 1.0 to 1.05 they gave me the same thing he is having. so I stayed with the 1.0 until the 1.13's came along and they worked well.
I suggest his is a driver issue IRQ not less then, Bksod or random restarts or other blue screen errors.
Try the 1.00's
Oh by the way now my kid uses my old 300watter on his 1900xp nforce machine, with all kind of toys and his is also stable. So Wonky and Athlonix quit suggesting that a 300psu is not sufficent when in fact it may work very well. oh and one more thing Athlonix GET OFF THE SOUND CARD THING!!! the onboard works, can't you get that in your head. Only yours doesn't every one elses does. can someone draw a picture of that
Jim. -
UDS 4.0 once again: Could not add "DB11.DBB6" to the response list.
Hi,
once again we have heavy trouble with UDS 4.0 connecting to a SINUMERIK OPC server.
Unfortunately the OPC server does not support browsing. GroupList and TagList returns nothing.
The facts:
- MII 12 on Windows Server 2003
- UDS 4.0 SP1 on same server.
- OPC connectivity has been tested with Matrikon Explorer. Tag has been added manually (remember, browsing not possible).
- Creating UDS instance works. UDS can see remote OPC server and is able to create an instance from it.
- Data server has been created in MII 12 to connect to UDS.
- Connection status to UDS is ok. Can also be seen as Debug file shows query details.
- TagQuery has been created with adding the tag manually (browsing not possible).
When we try to test the query we always get the error message
Could not add "DB11.DBB6" to the response list.
and
No Tag selected
The strange thing ist that, if we use a non existing tag like "test123" then the same error occurrs instead of "No valid tags requested".
Here you can find the debug file of UDS:
[05/14/2008-10:56:18.889] focketest [P:4000, T:2212, Host, INFO] 0x11201 Host is exiting. [Host.cpp @ 338, CHostModule::RunMessageLoop]
[05/14/2008-10:56:19.030] focketest [P:4000, T:2556, UDS, INFO] 0x2028 Disconnected from the server. [Connection.cpp @ 2224, CLHOpcDaConnection::Unload]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11400 Command Line: "C:\Programme\SAP\xMII\UDS\xMIIUDSHost.exe" test. [Host.cpp @ 433, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11405 Host Build Configuration: Release. [Host.cpp @ 436, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11406 Host Build Date: Dec 11 2007. [Host.cpp @ 437, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11407 Host Description: xMII UDS Host. [Host.cpp @ 438, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11408 Host File: xMIIUDSHost.exe. [Host.cpp @ 439, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11409 Host Version: 4.0.3.10. [Host.cpp @ 440, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: OPC-DA. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Include Quality = No. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Acquisition Mode = Synchronous. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Read From Device = true. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Read Delay = 100. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Force flat namespace = false. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Automatically Reconnect = true. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: OPC Group Number = 1234. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: OPC Group Name = LHDS_OPCGROUP. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Acceptable Data Quality = Good. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.341] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Startup Delay = 1000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Use Legacy Tag Format = false. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Legacy Delimiter = .. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Activate Items = Both. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Group Update Rate = 0. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: OPC Server = 192.168.0.1; OPC.SINUMERIK.Machineswitch; OPC DA2. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: Cache. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Mode = Cache with Dynamic Metadata. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Mask = . [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: Host. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Pool Size = 5. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Runtime Mode = Service. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Threading Model = MTA. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Stack Size = 0. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Collect Requests = false. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Shutdown Timeout = 10. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Use IOCP = true. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service Startup = Manual. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service Dependencies = Eventlog. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Trusted Requesters = . [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Maximum Concurrent Connections = 100. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Connection Wait Time = 5000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Max Reconnect Sleep Time = 1000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Auto-reconnect Attempts = 5. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Monitor Cycle = 15. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Port = 9000. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service User = .\auduser. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Service Password = *****. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11402 Found Parameter: Log Level = Debug. [Host.cpp @ 487, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11401 Found Aspect: Logging. [Host.cpp @ 468, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11403 Operating System Version: Windows XP Professional (Build 2600) with Service Pack 2, Version (2.0), Components: Single User Terminal Services. [Host.cpp @ 501, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11411 Processor 0 Info - Speed: 1596 MHz, Name: Genuine Intel(R) CPU 2140 @ 1.60GHz, Identifier: x86 Family 6 Model 15 Stepping 2, Vendor: GenuineIntel. [Host.cpp @ 548, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11411 Processor 1 Info - Speed: 1596 MHz, Name: Genuine Intel(R) CPU 2140 @ 1.60GHz, Identifier: x86 Family 6 Model 15 Stepping 2, Vendor: GenuineIntel. [Host.cpp @ 548, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, SYSTEM] 0x11412 Memory Used 71% - Physical Used 294 of 1021 MB, Paged File 2896 of 3988 MB, Virtual Used 1996 of 2047 MB. [Host.cpp @ 557, CHostModule::LogConfig]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, DEBUG] 0x14000 Creating the provider thread. [DataServerThread.cpp @ 44, DataServerThread::Spawn]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, DEBUG] 0x14002 Spawning the thread. [DataServerThread.cpp @ 53, DataServerThread::Spawn]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1236, Host, DEBUG] 0x14003 Waiting for thread callback. [DataServerThread.cpp @ 57, DataServerThread::Spawn]
[05/14/2008-10:56:40.356] focketest [P:2532, T:1492, Host, DEBUG] 0x14100 Provider thread has been created, and attempting to enter the xMIIOpcDaUDS.DataServer.1. [DataServerThread.cpp @ 82, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.372] focketest [P:2532, T:1492, Host, DEBUG] 0x14101 Initializing COM environment. [DataServerThread.cpp @ 91, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.372] focketest [P:2532, T:1492, Host, DEBUG] 0x14102 Creating the provider. [DataServerThread.cpp @ 98, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, Host, DEBUG] 0x14103 Creating the local configuration context object. [DataServerThread.cpp @ 105, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, Host, DEBUG] 0x14104 Initializing the provider. [DataServerThread.cpp @ 109, DataServerThread::SpawnServer]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2000 Got the self pointer. [Connection.cpp @ 246, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2001 Got the DCOM settings: machine = 192.168.0.1, progid = OPC.SINUMERIK.Machineswitch. [Connection.cpp @ 252, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2002 Got the OPC settings: group = 1234, client = LHDS_OPCGROUP, mode = SYNCHRONOUS. [Connection.cpp @ 258, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2003 Got the sleep time. {extra params}: {1000} [Connection.cpp @ 270, CLHOpcDaConnection::FinalInitialize]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2016 Checking the state of the connection. [Connection.cpp @ 2032, CLHOpcDaConnection::Load]
[05/14/2008-10:56:40.387] focketest [P:2532, T:1492, UDS, DEBUG] 0x2017 Attempting to connect to the server. [Connection.cpp @ 2036, CLHOpcDaConnection::Load]
[05/14/2008-10:56:40.450] focketest [P:2532, T:1492, UDS, DEBUG] 0x2018 Got the servers class id. [Connection.cpp @ 2048, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201a Advising on the servers events. [Connection.cpp @ 2087, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201b Adding the group. [Connection.cpp @ 2096, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201c Loading group data. [Connection.cpp @ 2114, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, DEBUG] 0x201e Adding all connection items. [Connection.cpp @ 2143, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.903] focketest [P:2532, T:1492, UDS, INFO] 0x201f Connected to the SINUMERIK OPC-Server DataAccess-V2.4.2.98 (C) Siemens AG (1998-2003) server. [Connection.cpp @ 2154, CLHOpcDaConnection::Load]
[05/14/2008-10:56:41.950] focketest [P:2532, T:2696, UDS, INFO] 0x0 Initializing Browser. [tagUtil/lhds2BrowseThread.h @ 127, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.950] focketest [P:2532, T:2696, UDS, INFO] 0x0 Reading Groups. [tagUtil/lhds2BrowseThread.h @ 147, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.950] focketest [P:2532, T:2696, UDS, INFO] 0x0 Reading Items. [tagUtil/lhds2BrowseThread.h @ 172, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.965] focketest [P:2532, T:2696, UDS, INFO] 0x0 Shutting Browser Down. [tagUtil/lhds2BrowseThread.h @ 279, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.965] focketest [P:2532, T:2696, UDS, INFO] 0x0 Browsing Finnished. [tagUtil/lhds2BrowseThread.h @ 303, lhds::BrowsingThread::DoBrowse]
[05/14/2008-10:56:41.997] focketest [P:2532, T:1492, UDS, DEBUG] 0x1003 Adding the modes. [DataServer.cpp @ 80, CLHOpcDaDataServer::FinalInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3000 Initializing the Current mode. [basemode.h @ 59, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3001 Reading from the device? TRUE. [basemode.h @ 67, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4001 Accessing using: SYNCHRONOUS. [basemode.h @ 75, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4002 Delay time: 100. [basemode.h @ 82, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3004 Minimum required quality: BOTH. [basemode.h @ 122, OPCDABaseMode<class CLHOpcDaDSCurrent>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3000 Initializing the Current mode. [basemode.h @ 59, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3001 Reading from the device? TRUE. [basemode.h @ 67, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4001 Accessing using: SYNCHRONOUS. [basemode.h @ 75, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x4002 Delay time: 100. [basemode.h @ 82, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, DEBUG] 0x3004 Minimum required quality: BOTH. [basemode.h @ 122, OPCDABaseMode<class CLHOpcDaDSCurrentWrite>::FinalTagModeInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, UDS, INFO] 0x1004 Finnished initializing. [DataServer.cpp @ 86, CLHOpcDaDataServer::FinalInitialize]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, Host, DEBUG] 0x14105 Attaching the providers to the Accept Thread classes cookie. [DataServerThread.cpp @ 113, DataServerThread::SpawnServer]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, Host, DEBUG] 0x14106 Setting the initialization event. [DataServerThread.cpp @ 120, DataServerThread::SpawnServer]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1492, Host, DEBUG] 0x14107 Entering the local message pump. [DataServerThread.cpp @ 126, DataServerThread::SpawnServer]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1236, Host, DEBUG] 0x14004 Finished initializing the provider thread. [DataServerThread.cpp @ 68, DataServerThread::Spawn]
[05/14/2008-10:56:42.012] focketest [P:2532, T:1236, Host, DEBUG] 0x12101 Created a link to the WSA subsystem. [ConnectionManager.cpp @ 23, ConnectionManager::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:0252, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:3476, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:2700, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:2628, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.090] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01b Attempting to initialize. [LHDSResponse.cpp @ 84, CLHDSResponse::Initialize]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13100 Starting up the accept thread socket. [AcceptThread.cpp @ 146, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13101 Creating accept socket. [AcceptThread.cpp @ 162, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13102 Binding accept socket. [AcceptThread.cpp @ 169, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13103 Listening to accept socket. [AcceptThread.cpp @ 176, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x13105 Spawning accept socket thread. [AcceptThread.cpp @ 182, AcceptThread::ListenIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x12102 Finnished initializing the connection manager. [ConnectionManager.cpp @ 42, ConnectionManager::Initialize]
[05/14/2008-10:56:42.122] focketest [P:2532, T:0172, Host, DEBUG] 0x13300 Accept thread created. [AcceptThread.cpp @ 192, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11104 Finnished PreMessageLoop operations. [Host.cpp @ 308, CHostModule::PreMessageLoop]
[05/14/2008-10:56:42.122] focketest [P:2532, T:0172, Host, DEBUG] 0x13301 Waiting for requests. [AcceptThread.cpp @ 208, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140a UDS Progid: xMIIOpcDaUDS.DataServer.1. [Host.cpp @ 592, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140b UDS Build Configuration: Release. [Host.cpp @ 593, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140c UDS Build Date: Dec 11 2007. [Host.cpp @ 594, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140d UDS Description: xMII OPC-DA UDS. [Host.cpp @ 595, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140e UDS File: xMIIOpcDaUDS.dll. [Host.cpp @ 596, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, SYSTEM] 0x1140f UDS Version: 4.0.3.10. [Host.cpp @ 597, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xMIIUDSHost.exe: Path = C:\Programme\SAP\xMII\UDS\xMIIUDSHost.exe. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ntdll.dll: Path = C:\WINDOWS\system32\ntdll.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module kernel32.dll: Path = C:\WINDOWS\system32\kernel32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module WS2_32.dll: Path = C:\WINDOWS\system32\WS2_32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msvcrt.dll: Path = C:\WINDOWS\system32\msvcrt.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module WS2HELP.dll: Path = C:\WINDOWS\system32\WS2HELP.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ADVAPI32.dll: Path = C:\WINDOWS\system32\ADVAPI32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module RPCRT4.dll: Path = C:\WINDOWS\system32\RPCRT4.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module Secur32.dll: Path = C:\WINDOWS\system32\Secur32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module USER32.dll: Path = C:\WINDOWS\system32\USER32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module GDI32.dll: Path = C:\WINDOWS\system32\GDI32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ole32.dll: Path = C:\WINDOWS\system32\ole32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.122] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module OLEAUT32.dll: Path = C:\WINDOWS\system32\OLEAUT32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module ATL80.DLL: Path = C:\WINDOWS\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_cbb27474\ATL80.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module MSVCR80.dll: Path = C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\MSVCR80.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module IMM32.DLL: Path = C:\WINDOWS\system32\IMM32.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xpsp2res.dll: Path = C:\WINDOWS\system32\xpsp2res.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module CLBCATQ.DLL: Path = C:\WINDOWS\system32\CLBCATQ.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module COMRes.dll: Path = C:\WINDOWS\system32\COMRes.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module VERSION.dll: Path = C:\WINDOWS\system32\VERSION.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msi.dll: Path = C:\WINDOWS\system32\msi.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module SXS.DLL: Path = C:\WINDOWS\system32\SXS.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xMIIUDSFramework.dll: Path = C:\Programme\SAP\xMII\UDS\xMIIUDSFramework.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module COMCTL32.dll: Path = C:\WINDOWS\system32\COMCTL32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module SHELL32.dll: Path = C:\WINDOWS\system32\SHELL32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module SHLWAPI.dll: Path = C:\WINDOWS\system32\SHLWAPI.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module USERENV.dll: Path = C:\WINDOWS\system32\USERENV.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module comctl32.dll: Path = C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msxml4.dll: Path = c:\WINDOWS\system32\msxml4.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module WININET.dll: Path = C:\WINDOWS\system32\WININET.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module Normaliz.dll: Path = C:\WINDOWS\system32\Normaliz.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module iertutil.dll: Path = C:\WINDOWS\system32\iertutil.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module urlmon.dll: Path = C:\WINDOWS\system32\urlmon.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module MSOXMLMF.DLL: Path = C:\Programme\Gemeinsame Dateien\Microsoft Shared\OFFICE11\MSOXMLMF.DLL. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module xMIIOpcDaUDS.dll: Path = C:\Programme\SAP\xMII\UDS\xMIIOpcDaUDS.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module NETAPI32.dll: Path = C:\WINDOWS\system32\NETAPI32.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module opccomn_ps.dll: Path = C:\WINDOWS\system32\opccomn_ps.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module mswsock.dll: Path = C:\WINDOWS\system32\mswsock.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msv1_0.dll: Path = C:\WINDOWS\system32\msv1_0.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module iphlpapi.dll: Path = C:\WINDOWS\system32\iphlpapi.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module avsda.dll: Path = C:\WINDOWS\system32\avsda.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module hnetcfg.dll: Path = C:\WINDOWS\system32\hnetcfg.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module wshtcpip.dll: Path = C:\WINDOWS\System32\wshtcpip.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module opcproxy.dll: Path = C:\WINDOWS\system32\opcproxy.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module rsaenh.dll: Path = C:\WINDOWS\system32\rsaenh.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, DEBUG] 0x11500 Found Module msxml3.dll: Path = C:\WINDOWS\system32\msxml3.dll. [Host.cpp @ 611, CHostModule::LogState]
[05/14/2008-10:56:42.137] focketest [P:2532, T:1236, Host, INFO] 0x11200 Host is starting. [Host.cpp @ 329, CHostModule::RunMessageLoop]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13302 Accepted a good socket. [AcceptThread.cpp @ 216, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13303 Creating IOCP request data. [AcceptThread.cpp @ 227, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13304 Sending IOCP the request data. [AcceptThread.cpp @ 231, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13306 IOCP handle accepted. [AcceptThread.cpp @ 240, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:0172, Host, DEBUG] 0x13301 Waiting for requests. [AcceptThread.cpp @ 208, AcceptThread::AcceptThreadProcIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Host, DEBUG] 0x15003 IOCP completed and performing a read operation. [ThreadPool.cpp @ 427, ThreadPool::ThreadProc]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x17004 Attempting to execute the IOCP logic. [LHDSChannelHandler.cpp @ 470, CLHDSChannelHandler::ExecuteIOCP]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x17005 Attempting to executing the query. [LHDSChannelHandler.cpp @ 552, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.386] focketest [P:2532, T:3688, Framework, DEBUG] 0x17008 Decoding the input. [LHDSChannelHandler.cpp @ 559, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x12002 Decoded the context. Original query was: STYLESHEET http://bermii:50000/XMII/Stylesheets/IllumRowsetHTML.xsl QueryTemplate DemoMaschine/testquery Content-Type text/html TotalizerFactor 1.0 NumberFormat 0.00 UseGroupMask false ReaderRoles XMII Users IsCachable false WriterRoles XMII Developers,XMII Administrators DurationUnits M Mode Current IntervalCount 1 RowCount 60 AllowFuture true Version 12.0.3 Build(106) Trace false DocType TagQuery Debug false Resolution 0 SaveDate 05/14/2008 10:48:58 PathID 111 CacheDuration 0 Server OPCserver Duration 60 DateFormat MM/dd/yyyy HH:mm:ss ExcludeRemotes true CacheDurationUnits M AllowBuffering false ID -1 StartDate 1210751815 EndDate 1210755415 TagName.1 DB11.DBB6 !. [LHDSContext.cpp @ 190, CLHDSContext::DecodeContext]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17006 Executing the query. [LHDSChannelHandler.cpp @ 598, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2016 Checking the state of the connection. [Connection.cpp @ 2032, CLHOpcDaConnection::Load]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2005 Connecting. [Connection.cpp @ 326, CLHOpcDaConnection::FinalConnect]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2016 Checking the state of the connection. [Connection.cpp @ 2032, CLHOpcDaConnection::Load]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, UDS, DEBUG] 0x2006 Connected. [Connection.cpp @ 329, CLHOpcDaConnection::FinalConnect]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a002 Setting a new message. [LHDSResponse.cpp @ 378, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a004 Header was not sent. [LHDSResponse.cpp @ 382, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a000 Setting a non-fatal message. [LHDSResponse.cpp @ 390, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a00e Preparing the response. [LHDSResponse.cpp @ 350, CLHDSResponse::Prepare]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a007 Attempting to send the header. [LHDSResponse.cpp @ 317, CLHDSResponse::SendHeader]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a006 Sending the header. [LHDSResponse.cpp @ 320, CLHDSResponse::SendHeader]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17001 Attempting to send the data. [LHDSChannelHandler.cpp @ 221, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17002 Sending: {0-0-0-1-0-0-1-25-230-110-141-88-0-0-1-25-230-165-123-216}. [LHDSChannelHandler.cpp @ 242, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x17000 Finnished sending. [LHDSChannelHandler.cpp @ 283, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a002 Setting a new message. [LHDSResponse.cpp @ 378, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.418] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a003 Header was sent as non-fatal. [LHDSResponse.cpp @ 406, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a002 Setting a new message. [LHDSResponse.cpp @ 378, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a003 Header was sent as non-fatal. [LHDSResponse.cpp @ 406, CLHDSResponse::SetMessage]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a010 Locking the response. [LHDSResponse.cpp @ 473, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a017 Attempting to insert a node. [LHDSResponse.cpp @ 215, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01a Node already exists. [LHDSResponse.cpp @ 218, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a023 Finalizing all response nodes. [LHDSResponse.cpp @ 114, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01c Sending node, This is not the last node. [LHDSResponse.cpp @ 120, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01e Sending non-fatal message. [LHDSResponse.cpp @ 124, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17001 Attempting to send the data. [LHDSChannelHandler.cpp @ 221, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17002 Sending: {0-0-0}. [LHDSChannelHandler.cpp @ 242, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17000 Finnished sending. [LHDSChannelHandler.cpp @ 283, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01f Sending messages. [LHDSResponse.cpp @ 173, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01d Sending non-fatal message contents. [LHDSResponse.cpp @ 177, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17001 Attempting to send the data. [LHDSChannelHandler.cpp @ 221, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17002 Sending: {0-2-0-47-67-111-117-108-100-32-110-111-116-32-97-100-100-32-34-68-66-49-49-46-68-66-66-54-34-32-116-111-32-116-104-101-32-114-101-115-112-111-110-115-101-32-108-105-115-116-46-0-17-78-111-32-116-97-103-115-32-115-101-108-101-99-116-101-100-46}. [LHDSChannelHandler.cpp @ 242, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x17000 Finnished sending. [LHDSChannelHandler.cpp @ 283, CLHDSChannelHandler::SendData]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a023 Finalizing all response nodes. [LHDSResponse.cpp @ 114, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a010 Locking the response. [LHDSResponse.cpp @ 473, CLHDSResponse::Lock]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a017 Attempting to insert a node. [LHDSResponse.cpp @ 215, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01a Node already exists. [LHDSResponse.cpp @ 218, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.433] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01c Sending node, This is not the last node. [LHDSResponse.cpp @ 120, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a023 Finalizing all response nodes. [LHDSResponse.cpp @ 114, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a011 Attempting to lock the response. [LHDSResponse.cpp @ 470, CLHDSResponse::Lock]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a010 Locking the response. [LHDSResponse.cpp @ 473, CLHDSResponse::Lock]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a017 Attempting to insert a node. [LHDSResponse.cpp @ 215, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01a Node already exists. [LHDSResponse.cpp @ 218, CLHDSResponse::InsertFinished]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a01c Sending node, This is not the last node. [LHDSResponse.cpp @ 120, CLHDSResponse::FinalizeAll]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1a028 Clearing the response. [LHDSResponse.cpp @ 94, CLHDSResponse::Clear]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x17007 Done the execution cycle. [LHDSChannelHandler.cpp @ 604, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x1700c Finnished executing: 1. [LHDSChannelHandler.cpp @ 606, CLHDSChannelHandler::OnExecute]
[05/14/2008-10:56:54.449] focketest [P:2532, T:3688, Framework, DEBUG] 0x17003 Finnished execution the IOCP logic. [LHDSChannelHandler.cpp @ 538, CLHDSChannelHandler::ExecuteIOCP]
[05/14/2008-10:57:08.104] focketest [P:2532, T:1236, Host, INFO] 0x11201 Host is exiting. [Host.cpp @ 338, CHostModule::RunMessageLoop]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, Host, DEBUG] 0x14108 Shutting down provider the provider thread. [DataServerThread.cpp @ 137, DataServerThread::SpawnServer]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, Host, DEBUG] 0x14109 Destroying the local configuration context. [DataServerThread.cpp @ 143, DataServerThread::SpawnServer]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2020 Checking status before disconnecting. [Connection.cpp @ 2164, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2021 Attempting to disconnect from the server. [Connection.cpp @ 2171, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2023 Removing the Async event interface. [Connection.cpp @ 2189, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2024 Removed the group interface. [Connection.cpp @ 2195, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2025 Unadvising on the servers events. [Connection.cpp @ 2207, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2027 Server removed. [Connection.cpp @ 2221, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, INFO] 0x2028 Disconnected from the server. [Connection.cpp @ 2224, CLHOpcDaConnection::Unload]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, UDS, DEBUG] 0x2004 Shutting down the connection. [Connection.cpp @ 316, CLHOpcDaConnection::FinalShutdown]
[05/14/2008-10:57:08.120] focketest [P:2532, T:1492, Host, DEBUG] 0x1410a Setting the shutdown event. [DataServerThread.cpp @ 160, DataServerThread::SpawnServer]
The Debug file is from a Windows XP Professional system. But the same thing happens with the UDS installed
on Windows Server 2003 (x64).
The following config variations have been tried:
- synchronous / asynchronous
- Cache mode "None"
- Threading model STA / MTA
Any suggestions?
Regards,
MatthiasHi Mathais,
I assume you have installed the OPC enum services in the same machine where xMII UDS is running.
Also make sure that the browsing mode is set to true in the OPC Server.
We had the same issue...and were receiving the same error...but once we changed teh Browing mode at teh OPC server to true, tag quesries started working....
Hope it helps...
Pramod -
Hello, I would like to download the purchased programm once again. how can I do it?
I can just find the serial number, but there is no download link.
I bought it 1 year ago, and I didn't save it on my mac.
Unfortunately, I need to format my mac, therefore I must have the software, what I don't have it any more. etc.
please, help me.Adobe Stores | Online order and payment FAQ's: http://helpx.adobe.com/x-productkb/policy-pricing/stores-online-order-payment-faq.html#mai n_I_need_help_downloading_my_order .
Thanks
Nikhil -
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again
We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
Keith Garner - keithga.wordpress.com -
Report is not getting refreshed after changing prompts once again?
HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
HarshadThe workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda -
Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).
Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g -
I was told to reinstall Snow leopard which I did . More troubles! It then came up cannot iinstall as there are errors. Tried going into disc utilities and repair but once again it stated iin red I cannot proceed. can anyone help me here. Before this was happening my system was slowing right down with the beach ball making an apearance after tapping the mouse or typing text.
So you are trying to reinstall Snow Leopard?
In order to do that, you need to erase your hard drive - you cannot go back to an earlier system without erasing. Make sure you back up your files first. Then insert the Snow Leopard install disk, and restart while holding down the C key. If that does not work, insert the install disk, go to System Preferences > Startup Disk and highlight the install disk > click on restart.
Once you are booted into the install disk, go past the language selection and then to Utilities in the menu bar. Use Disk Utility to repair the drive (just in case), erase it and then install. After that, eject the disk and update to the latest 10.6.8. -
My MBP just failed, bought it from a friend and dont have an Apple ID with Lion, Lion is no longer on the App Store so, how can I buy it on my Apple ID so I can use Recovery to put my MBP to function once again? Help D=
Or what else could I do? I don´t have any USB to reinstall the OS and my DVD Unit is death, but it seems I can reinstall over Wi-Fi if Im able to link an OS X Lion license to my Apple IDYou would need to call Apple Sales (USA 1-800-MY-APPLE) and purchase a redemption code for Lion.
-
If I am browsing on site such as Ebay or any shopping site and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items. This is not only on Ebay it is everywhere I search. Firefox goes back to the top of the page . It is annoying to have to figure out exactly where I was if I left the page and then returned. This is a hinderance when using Firefox. I have considered uninstalling it because of the inconvenience of 're-searching' after already doing a search. Firefox used to take me right back to where I was if I left a page, but that feature is not working now. I am not sure how to change this in the settings.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe
I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service << -
Is it possible to add new columns with format "Text" once a table is linked to a form
Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps! -
How to transfer the file once again from save folder to main directory .
Hello friends ,
By mistakenly i have executed wrong job and the file has been moved from Al11 directory to save folder.
I wanted to have the same file once again in the main directory . can u plz tell me how to do this ?
RegardsYou can use "infospoke" to save file in the Application server(AL11).
Also give the T.code AL11 and click on the tab "Configure" to create file on the Application server.
Edited by: Rohan Kumar on Jan 16, 2008 11:20 AM
Maybe you are looking for
-
Portal runtime error while trying to run a MSS report
Hello gurus!! I setup the MSS reports launchpad and now I am seeing all the list of reports on the reports launchpad. I am able to click on all the links and each link opens up the relevant page and the selection criteria also comes up. However, o
-
Creating a user in Active Direcory
Hi, Here is the scenario. I am loading accounts into IdM through flatfile, after loading accounts into IdM, through actvesync I am trying to push any updated or new accounts into Active Directory. but I am unable to create account in AD, strangely I
-
Nothing works! Did you even test this version>!
-
Hello, i have a question regarding the hardware of a fms server. We have it installed and working properly on: CentOS 5.3 64bit Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz 3GB RAM 2xSATA HDD in RAID1 We are going to stream live video, at a rate o
-
One of my projects is to migrate our environment to a SSO (from both UNIX and WinXX) system using smartcard technology. I saw the Federated Naming Service and SAML references in the FNS docs. However, I'd like to use the JES ACM because my messaging