Format madness ... how to convert 29.97 to 23.98
ok another multi-cam project, so all the the frame rates etc must match to multi-clip. right?
the 2 primary cameras were shot Apple ProRes 422 (HQ), 960 × 720 (1248 × 702) 23.98 FPS. planning to edit in 23.98. the oddball cam was HDV 1080i60, 1440 × 1080 (1888 × 1062) 29.97 FPS. haven't been able to find the settings in compressor that will allow me to convert the oddball cam to the same format as the primary 23.98 cams. unfortunately in the encoder in compressor, when i select Apple ProRes 422 (HQ) as the format type, 23.98 is not available as a frame rate. only 24. which of course doesn't work when multi-clipped.
can anyone suggest a setting that will accomplish this. thanks.
One way:
Convert the clips to ProRes(whichever version you are editing with)at the other clips size(1280x720?) in Compressor. Put all of these files in one folder.
Use Cinema Tools to batch conform to 23.98. Confirm codec, frame size, sync, etc. when you import clips into FC.
Similar Messages
-
Hi Experts,
I have written a classical report with write statements and when i am downloading in excel the format is mismatching and now i want to convert into PDF format.
How to convert into PDF format from Classical report ?
YusufHi yusuf,
please find the below report,,
please make two include programs before executing it,
there codes are pasted below,
INCLUDE zimpr_data_declaration.
INCLUDE zimpr_performs_wrap.
REPORT zimpr_word_wrap NO STANDARD PAGE HEADING LINE-SIZE 115..
INCLUDE for DATA DECLARATION *
INCLUDE zimpr_data_declaration.
INCLUDE for all performs. *
INCLUDE zimpr_performs_wrap.
TOP-OF-PAGE--
TOP-OF-PAGE.
PERFORM f_top_page. "TOP OF THE REPORT PAGE,I.E. HEADER.
START-OF-SELECTION.
SET PF-STATUS 'SEL_SCREEN'. "PF-STATUS OF THE SELECTION SCREEN.
PERFORM f_data_retrieval. "PERFORM FOR ALL SELECT STATEMENTS.
PERFORM f_report_display. "REPORT DISPLAY,WRITE STATEMENTS.
--Define the actions to be performed for pf-status-----
AT USER-COMMAND.
wf_ok_code = sy-ucomm.
wf_save_ok = wf_ok_code.
CLEAR wf_ok_code.
CASE wf_save_ok.
WHEN 'PDF'. "WHEN PDF ICON IS CLICKED,REPORT WILL CONVERT INTO PDF.
loc_repid = sy-repid. "PROGRAM NAME
--THIS FM SETS THE PARAMETERS FOR LAYOUT OF PDF OUTPUT--
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
layout = loc_paart "LANDSCAPE LAYOUT
line_size = loc_linsz "CHARACTER WIDTH OF REPORT
no_dialog = 'X'
user = sy-uname "USERNAME
IMPORTING
out_parameters = loc_print_parms "OUTPUT PARAMETERS WILL BE COLLECTED HERE.
valid = loc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
--FOR GENERATING THE SPOOL NUMBER--
NEW-PAGE PRINT ON NO DIALOG PARAMETERS loc_print_parms. " This allocates the spool no
"to the screen without the dialog screen.
PERFORM f_top_page.
PERFORM f_report_display.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the spool no was generated.
wf_id = sy-spono. " This assign the spool no of the screen to the variable.
--PERFORM FOR GETTING THE PDF OUTPUT--
PERFORM f_pdf_display.
--PERFORM FOR DOWLOADING FILE TO A LOCAL DISK--
PERFORM f_download_local.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
include data declaration----
*& Include ZIMPR_DATA_DECLARATION
TYPE-POOLS : shlp.
DATA : wf_ordert TYPE aufk-auart. "ORDER TYPE
DATA : wf_order TYPE aufk-aufnr. "ORDER NUMBER
DATA : wf_bdate TYPE afko-gstrp. "BASIC START DATE
DATA : wf_status(4) TYPE c ."rihea-i_astatin. "STATUS
DATA : wf_objnr TYPE jest-objnr VALUE 'OR%'. "Object number
DATA : wf_aufnr TYPE aufk-aufnr.
DATA : wf_name TYPE thead-tdname. "NAME TO PASS IN FM READ_TEXT
DATA : wf_date1(12) TYPE c. "DATE
DATA : wf_i1(3) TYPE n,wc_i1(3) TYPE n VALUE '1'. "COUNTERS FOR REPORT DISPLAY
DATA : wf_i2(3) TYPE n,wc_i2(3) TYPE n VALUE '1'.
DATA : wf_kopf TYPE tdid VALUE 'KOPF',wf_aufk TYPE tdobject VALUE 'AUFK'.
DATA : wf_save_ok TYPE sy-ucomm ,wf_ok_code TYPE sy-ucomm.
DATA: wf_id TYPE tsp01-rqident , " For storing Spool request number
wf_bytes TYPE i . " For storing the bytes of data to be converted to PDF.
DATA : wf_langu(2) TYPE c VALUE 'EN'.
DATA: wf_pripar TYPE pri_params, " Structure for Passing Print Parameters
wf_rcpar TYPE arc_params. " ImageLink structure
DATA : wf_statu TYPE dfies-fieldname VALUE 'STATUS',
wf_field TYPE help_info-dynprofld VALUE 'S_STATUS'.
&--SELECTION SCREEN--
SELECTION-SCREEN BEGIN OF BLOCK b_1 WITH FRAME TITLE text-000.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_ordert FOR wf_ordert . "ORDER TYPE
SELECT-OPTIONS: s_order FOR wf_order OBLIGATORY. "ORDER NUMBER
SELECT-OPTIONS: s_bdate FOR wf_bdate. "BASIC START DATE
SELECT-OPTIONS: s_status FOR wf_status matchcode object zei_sys . "SYSTEM STATUS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_1.
*--INTERNAL TABLES--
TYPES : BEGIN OF ty_aufk,
aufnr TYPE aufk-aufnr, "OREDR NUMBER
auart TYPE aufk-auart, "ORDER TYPE
objnr TYPE aufk-objnr, "OBJECT NUMBER
ktext type aufk-ktext, "SHORT TEXT
gstrp TYPE afko-gstrp, "BASIC START DATE
END OF ty_aufk.
TYPES : BEGIN OF ty_tj02t,
objnr TYPE aufk-objnr, "OBJECT NUMBER
txt04 TYPE tj02t-txt04, "STATUS
istat TYPE tj02t-istat, "Object status
spras TYPE tj02t-spras, "LANGUAGE KEY
END OF ty_tj02t.
TYPES : BEGIN OF ty_temp,
objnr TYPE aufk-objnr,
status(300) TYPE c,
END OF ty_temp.
TYPES : BEGIN OF ty_wrap,
line(54) TYPE c, "LONG TEXT
END OF ty_wrap.
TYPES : BEGIN OF ty_wrap2,
line(25) TYPE c, "STATUS
END OF ty_wrap2.
TYPES : BEGIN OF ty_f4,
txt04 TYPE tj02t-txt04,
txt30 TYPE tj02t-txt30,
END OF ty_f4.
types : begin of ty_sta,
istat type tj02t-istat,
objnr type jest-objnr,
end of ty_sta.
data : int_sta type table of ty_sta with header line.
DATA : int_f4 TYPE TABLE OF ty_f4 WITH HEADER LINE.
DATA: int_pdf TYPE TABLE OF tline WITH HEADER LINE. "TABLE FOR PDF CONVERSION
DATA: int_wrap TYPE TABLE OF ty_wrap WITH HEADER LINE. "TABLE FOR LONGTEXT
DATA: int_wrap2 TYPE TABLE OF ty_wrap2 WITH HEADER LINE. "TABLE FOR STATUS
DATA: int_temp TYPE TABLE OF ty_temp WITH HEADER LINE. "Table for concatenation of system status.
DATA: int_aufk TYPE TABLE OF ty_aufk WITH HEADER LINE.
DATA: int_tj02t TYPE TABLE OF ty_tj02t WITH HEADER LINE.
DATA: int_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE. "TABLE FOR READ_TEXT.
DATA : int_fld TYPE TABLE OF dfies ,wa_fld LIKE LINE OF int_fld. " Field Type for FM for F4 help
DATA :int_return TYPE TABLE OF ddshretval WITH HEADER LINE .
DATA:
loc_print_parms LIKE pri_params, "PRINT PARAMETERS
loc_valid(1) TYPE c,
loc_file type SDOK_CHTRD,
loc_bytecount TYPE i, "NUMBER OF BYTES TRANSFERRED
loc_length TYPE i, "LINE-LENGTH
loc_rqident LIKE tsp01-rqident, "SPOOL NUMBER
loc_rq2name(12) TYPE c.
DATA: loc_filename LIKE rlgrap-filename. "FILENAME
DATA:loc_repid LIKE sy-repid, " Report to execute
loc_linsz LIKE sy-linsz VALUE 115, " Line size
loc_paart LIKE sy-paart VALUE 'X_65_132'. " Paper Format
Include ZIMPR_PERFORMS_WRAP----
*& Include ZIMPR_PERFORMS_WRAP
*& Form f_top_page
top-of the page
--> p1 text
<-- p2 text
FORM f_top_page .
*--HEADER--
FORMAT COLOR 1 .
WRITE : text-010.
FORMAT COLOR 1 OFF.
WRITE : / text-011,sy-datum NO-GAP.
WRITE : / text-012,sy-uzeit NO-GAP,90 text-013,101 sy-uname.
ULINE .
FORMAT COLOR 1 INTENSIFIED OFF .
WRITE : 1 sy-vline, "HEADINGS
2 text-014 NO-GAP,
7 sy-vline,
8 text-015 NO-GAP,
20 sy-vline,
21 text-016 NO-GAP,
76 sy-vline,
77 text-017 NO-GAP,
88 sy-vline,
89 text-018 NO-GAP,
115 sy-vline.
WRITE : /1 sy-vline,
2 text-019 NO-GAP,7 sy-vline,
20 sy-vline,76 sy-vline,77 text-020 NO-GAP,88 sy-vline,115 sy-vline.
ULINE.
FORMAT COLOR 1 OFF.
ENDFORM. " f_top_page
*& Form f_data_retrieval
select statements
--> p1 text
<-- p2 text
FORM f_data_retrieval .
SELECTING ORDER TYPE,ORDER NO.,OBJECT NO. AND BASIC START DATE
SELECT p~aufnr
p~auart
p~objnr
p~ktext
r~gstrp
FROM ( aufk AS p INNER JOIN afko AS r ON raufnr = paufnr )
INTO TABLE int_aufk
WHERE p~aufnr IN s_order AND
p~auart IN s_ordert AND
r~gstrp IN s_bdate AND
p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
SORT int_aufk BY aufnr.
DELETE ADJACENT DUPLICATES FROM int_aufk.
SELECT q~istat
p~objnr
FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
INTO TABLE int_sta
FOR ALL ENTRIES IN int_aufk
WHERE p~objnr = int_aufk-objnr
AND q~txt04 IN s_status and
q~spras = wf_langu and
p~inact = ''.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
SORT int_sta BY objnr.
DELETE ADJACENT DUPLICATES FROM int_sta.
*--SELECTING OBJECT NO.,STATUS AND LANGUAGE--
IF int_sta[] IS NOT INITIAL.
SELECT p~objnr
q~txt04
q~istat
q~spras
FROM ( jest AS p INNER JOIN tj02t AS q ON pstat = qistat )
INTO TABLE int_tj02t
FOR ALL ENTRIES IN int_sta
WHERE p~inact = '' AND
p~objnr = int_sta-objnr AND
q~spras = wf_langu AND
q~txt04 IN s_status AND
p~objnr LIKE wf_objnr.
IF sy-subrc <> 0.
MESSAGE s101(zipm). "no values found for selection criteria.
STOP.
ENDIF.
ENDIF.
ENDFORM. " f_data_retrieval
*& Form f_report_display
report display
--> p1 text
<-- p2 text
FORM f_report_display .
LOOP AT int_tj02t. "concatenating the status into a internal table
AT NEW objnr.
CLEAR int_temp-status.
ENDAT.
CONCATENATE int_temp-status int_tj02t-txt04 INTO int_temp-status SEPARATED BY space.
AT END OF objnr.
int_temp-objnr = int_tj02t-objnr. "key field.
APPEND int_temp.
CLEAR int_temp.
ENDAT.
CLEAR int_tj02t.
ENDLOOP.
LOOP AT int_aufk.
CONCATENATE sy-mandt int_aufk-aufnr INTO wf_name . "concatenating client number and order number
*--THIS FM CAPTURES THE LONG TEXT AND STORES IT IN INTERNAL TABLE--
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = wf_kopf "TEXT ID
language = sy-langu "LANGUAGE
name = wf_name "TEXT NAME
object = wf_aufk "TEXT OBJECT
TABLES
lines = int_tline "LINES OF LONG TEXT.
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
int_tline-tdline = int_aufk-ktext.
APPEND int_tline.
CLEAR :int_tline.
ENDIF.
LOOP AT int_tline.
*--THIS FM WRAPS THE LONG TEXT INTO 54 CHARACTERS EACH--
CALL FUNCTION 'RKD_WORD_WRAP'
EXPORTING
textline = int_tline-tdline "LONG TEXT LINE
outputlen = 54 "OUTPUT LENGTH
TABLES
out_lines = int_wrap "INTERNAL TABLE
EXCEPTIONS
outputlen_too_large = 1
OTHERS = 2.
IF sy-subrc <> 0.
CLEAR :int_tline.
ENDIF.
ENDLOOP.
*-- THIS FM WRAPS THE STATUS INTO 25 CHARACTERS EACH--
READ TABLE int_temp WITH KEY objnr = int_aufk-objnr.
CALL FUNCTION 'RKD_WORD_WRAP'
EXPORTING
textline = int_temp-status
outputlen = 25
TABLES
out_lines = int_wrap2
EXCEPTIONS
outputlen_too_large = 1
OTHERS = 2.
IF sy-subrc <> 0.
CONTINUE.
ENDIF.
IF NOT int_wrap2[] IS INITIAL.
ULINE AT (115).
ENDIF.
DESCRIBE TABLE int_wrap LINES wf_i2. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP
DESCRIBE TABLE int_wrap2 LINES wf_i1. "COUNTING THE NO. OF LINES FOR TABLE INT_WRAP2
WHILE ( wc_i1 LE wf_i1 OR wc_i2 LE wf_i2 ).
IF ( wc_i2 LE wf_i2 ).
READ TABLE int_wrap INDEX wc_i2 . "READING THE INTERNAL TABLE INT_WRAP WITH INDEX
wc_i2 = wc_i2 + 1.
ENDIF.
IF ( wc_i1 LE wf_i1 ).
READ TABLE int_wrap2 INDEX wc_i1 . "READING THE INTERNAL TABLE INT_WRAP2 WITH INDEX
wc_i1 = wc_i1 + 1.
ENDIF.
*--THIS FM CONVERTS THE DATE FROM SYSTEM FORMAT TO OUTPUT FORMAT--
CALL FUNCTION 'CONVERSION_EXIT_SDATE_OUTPUT'
EXPORTING
input = int_aufk-gstrp
IMPORTING
output = wf_date1.
IF NOT int_wrap2[] IS INITIAL .
*--REPORT DISPLAY--
WRITE : /1 sy-vline, 2 int_aufk-auart COLOR = 4 INTENSIFIED OFF NO-GAP ,
7 sy-vline ,8 int_aufk-aufnr COLOR = 4 INTENSIFIED OFF NO-GAP,
20 sy-vline,21 int_wrap-line,
76 sy-vline ,77 wf_date1 ,
88 sy-vline ,89 int_wrap2-line,
115 sy-vline.
*--CLEARING THE VARIABLES--
wf_date1 = ''.
CLEAR: int_aufk,int_temp,int_wrap2-line,int_wrap-line.
ENDIF.
ENDWHILE.
wc_i1 = 1.
wc_i2 = 1.
CLEAR :int_wrap,int_wrap2.
REFRESH : int_wrap,int_wrap2,int_tline.
ENDLOOP.
ULINE AT (115).
ENDFORM. " f_report_display
*& Form F_PDF_DISPLAY
pdf conversion
--> p1 text
<-- p2 text
FORM f_pdf_display .
*--THIS FM CONVERTS THE SPOOL REQUEST INTO PDF REPORT--
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = wf_id "SPOOL NUMBER
no_dialog = space
pdf_destination = 'X'
IMPORTING
pdf_bytecount = loc_bytecount "NUMBER OF BYTES TRANSFERRED
TABLES
pdf = int_pdf "TABLE FOR PDF REPORT
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
ENDFORM. " F_PDF_DISPLAY
*& Form f_download_local
download to local system
--> p1 text
<-- p2 text
FORM f_download_local .
---------------------THIS FM DOWNLOADS THE PDF REPORT INTO LOCAL MACHINE
data loc_ret TYPE iwerrormsg.
CALL FUNCTION 'IW_C_GET_SAPWORKDIR'
IMPORTING
SAPWORKDIR = loc_file
ERROR_MSG = loc_ret
loc_filename = loc_file.
if loc_ret is initial.
concatenate loc_filename '\work order header long text_ ' sy-timlo '.pdf' into loc_filename.
endif.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
bin_filesize = loc_bytecount "NO. OF BYTES
filename = loc_filename "DEFAULT FILE NAME
filetype = 'BIN'
IMPORTING
act_filename = loc_filename
TABLES
data_tab = int_pdf.
ENDFORM. " f_download_local
if you have any doubts,,
please revert
Regards,
Talwinder -
How to convert date in varchar format to TimeZone format?
Hi,
Iam having a date '14-05-08 09:46:35 AM' (in Varchar format). How to convert this date to TimeZone ('IYYY-MM-DD"T"HH12:MI:SS"Z"FX') format?
For Example,
My input date is '14-05-08 09:46:35 AM' and I need output as '2008-05-14T09:46:35Z'.
How to convert this?
Thanks in Advance.Hi,
You would look up the TO_TIMESTAMP and the TO_CHAR functions in the SQL reference manual for the version you don't mention, and make up the solution yourself, rather than asking someone else to do your homework.
Sybrand Bakker
Senior Oracle DBA -
Video Format Total Solution: How to Convert and Edit Video on Windows/Mac
More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank youSo it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB
-
How to convert FLV and F4V files to other media formats
How to convert FLV and F4V files to other media formats
Nowadays, every one can download their favorite videos from video sharing websites like YouTube, Hulu, MySpace, Google Video, metacafe, Yahoo! Video, Reuters.com and so on at will. However, these video files we got are usually in the format of FLV, or F4V, which are not workable by most portable devices, or some video players and video editors on our PC. With the intention of solving these problems, this guide will show you how to convert FLV and F4V files to other video and audio formats in detail.
1. Download, install and run Pavtube FLV Converter
As soon as you run this program, the following wine red interface will show up:
2. Add files, set output format and destination folder
Input FLV and F4V files to this program by clicking on “Add” button, and select a format as the output format in the drop-down list of “Format”, meanwhile, you can press the output folder to specify the destination folder or just use the path set by default. Moreover, “merge into one file” enables you to combine multiple FLV and F4V files to be as a single file, if you have this needs, just tick it.
3. Set advanced settings
Click “Settings” button, the following interface will pop up. You can change the parameters like screen size, bit rate, frame rate, sample rate, etc. on it to optimize the output quality or compress file size.
4. Convert
After all settings are done, you can press “Convert” button to start transferring, and then the following window will show you the conversion info in detail. According to the info you can manage your time and disk space properly.
Pavtube FLV Converter can definitely complete the conversion at a swift speed with excellent quality; also it adopts an advanced audio-video sync technology, so that audio and video match very well in the resulted files. Therefore you need not worry about these issues.
Useful tips:
Free online FLV downloader:
www.convertdirect.com
http://vixy.net/
http://www.videoconverterdownload.com/online-free-flv-converter.html
http://www.flv2mp3.com/
http://www.mediaconverter.org/
http://2conv.com/
http://online.movavi.com/
http://www.youconvertit.com/
http://www.playtube.com/
http://www.convert.net/Flip4Mac
-
How to convert a String("yyyy-mm-dd") to the same but in Date format ?
Hi,
can anyone plz tell me how to convert a String to a date format.I'm using MSACCESS database.I want to store this string in the database.So i need to convert it to a date format since the table is designed such a way with date/time type for date field.I used SimpleDateFormat ,but i can't able to convert.The code is given below:
coding:
public String dateconvertion(String strDate)
try
SimpleDateFormat sdfSource = new SimpleDateFormat("yyyy-MM-dd");
Date date = sdfSource.parse(strDate);
SimpleDateFormat sdfDestination = new SimpleDateFormat("yyyy-MM-dd ");
strDate = sdfDestination.format(date);
catch(ParseException pe)
System.out.println("Parse Exception : " + pe);
return(strDate);
}i used prepared statement even now i am getting error like this.....
i have included the prepared statement package also...
my coding:
ResultSet rsdatetemp = null;
PreparedStatement ps = null;
String query ="select distinct itemcode from sales where bill date between ? and ?";
ps = precon.prepareStatement(query);
ps.setDate(1,d1);//d1 and d2 are in date format
ps.setDate(2,d2);
rsdatetemp = ps.executeQuery();
error :
symbol : method setDate(int,java.util.Date)
location: interface java.sql.PreparedStatement
ps.setDate(1,d1);
symbol : method setDate(int,java.util.Date)
location: interface java.sql.PreparedStatement
ps.setDate(2,d2); -
How to convert date format dd.mm.yy into yyyymmdd?
Hello experts,
how to convert date format dd.mm.yy into yyyymmdd?
Thanx
AxelHi
go through these previous threads on similar question
https://forums.sdn.sap.com/click.jspa?searchID=673529&messageID=1763194
Date Conversion in Flat File
converting the DATE(yyyymmdd) into MONTH(yyyymm) format
Date Format Conversion from MM.DD.YYYY to YYYYMMDD
gives clear idea
Reagrds
Kiran
Message was edited by:
ravi kiran naalla -
Hi All,
I have a requirement in my project like to convert the date time from one format to another.my situation is like to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format. I am using the soa suite 11.1.1.6.
Can any one suggest me how to convert in the BPEL transformation.
Thanks,
Sanju.Hi Sanju,
Store the date to be converted into a variable viz. dateVar. Now, process an expression in assign as: xp20:format-dateTime($dateVar,'[Y0001]-[M01]-[D01] [h]:[m01]:[s01]').
Regards -
How to convert date from "yyyymmdd" to "MM/DD/YYYY" format
1. I have one BLDAT field in my internal table.
its getting updated from input file.
2. The value in the input file is like yyyymmdd.
So the internal table field is filled like this
"YYYYMMDD".
3. After this,I have to compare this internal table
field with BSAD table.
4. The BLDAT field in BSAD table is in the format of
"MM/DD/YYYY".
5. the BLDAT field is having diff format in internal table and BSAD table.So I am unable to check this value.
How to convert it as like the BSAD table format."MM/DD/YYYY" format.
Thanks in advance!!Using the WRITE statement
data: gd_date(10). "field to store output date
* Converts date from 20020901 to 09.01.2002
write sy-datum to gd_date mm/dd/yyyy.
OR u can
CONCATENATE gd_date+4(2) gd_date+6(2) gd_date+0(4)
into gd_date seperated by '/' .
Hope this helps.
Kindly reward points and close the thread for the
answer which helped u OR get back with queries. -
How to convert date format in VC 7.0 to DD.MM.YYYY
Hi
I am on VC 7.0.
My requirment is to show Current date as a default value for a input field.
I am using date function now() as default value...and it is displaying the current date
08.07.2009 as Jul 08,2009
But my requirment is to display it as 08.07.2009
Please update me how to convert the data format to be displayed as DD.MM.YYYY format
ThanksHi,
Use DSTR method to change date format. Check the below link for details.
http://help.sap.com/saphelp_nw70/helpdata/en/49/032e66f4a4105ee10000000a42189d/frameset.htm
Regards
Basheer -
I borrowed a JVC Everio HD Camcorder that shoots video and stores on an SD-Card in a CED format. I cannot playback this video on my MAC and would also like to know how to convert to a more standard form of video.
I have downloaded the trail....and it won't recognize my .264 files....not sure what the deal is? Here is a screen shot-they files are "grayed" out....and won't highlight. Do you see anything wrong? I'm pulling the files off of a Lorex DVR security system. LHD200
-
iTunes 11 has converted some songs to Quicktime movie format. How can I convert them back to MPEGs?
I didn't mess with the iTunes Media folder previously, so I don't think that was the cause. Anyway, I manually fixed most of the songs, but I still can't figure out how to fix the movies that became listed as songs.
Here is a screenshot of what it looks like when I click on "Get Info" for one of the movies (which has ended up in the music section on iTunes):
There is no option to change the media kind to "movie" or "video" even though it is a movie and it still plays as a movie if I press play. -
How to convert the alv list data into pdf format
Hi Expersts,
Is it possible to convert the alv list output data into PDF format? if yes, then please help me with this issue.
thanks in advance,
Regards,
Samadhii samad,
you can go through these link.i hope it ll solve your purpose
How to convert list output to PDF
Display ALV list output in PDF format
regards,
Shweta -
How to convert binary file to a particular format?
Hi,
I am having a requirement. I have in database various kinds of files stored as binary format. Its a sybase database. Now the files can be .pdf, or .doc also. But they are stored in binary format.
I need to read the file from database.
Now I can use jdbc to read the particular column value which contains the file in binary format.
But tricky part is how to convert the binary file entry in a proper respective file format? So I have another column which basically has the value to tell the type of file. So I have ".doc" or ".pdf" as each entry of file...
So please help me how can we do this using Java?
THanksHi,
I am having a requirement. I have in database various
kinds of files stored as binary format. Its a sybase
database. Now the files can be .pdf, or .doc also.
But they are stored in binary format.
I need to read the file from database.
Now I can use jdbc to read the particular column
value which contains the file in binary format.
But tricky part is how to convert the binary file
entry in a proper respective file format? So I have
another column which basically has the value to tell
the type of file. So I have ".doc" or ".pdf" as each
entry of file...
So please help me how can we do this using Java?
THanks -
How to convert VHDX to VHD file format on windows 8 / Windows server 2012?
Here is an article to describe how to convert virtual hard disk VHDX file format to VHD
http://anuraggawande.blogspot.in/2012/10/vhdx-to-vhd-conversion.htmlHi,
Thanks for sharing the web link!
You help other community members who facing similar problems.
Thanks for your contribution to Windows Server Forum!
To convert VHD format, you can also use Convert-VHD comlet. The Convert-VHD cmdlet converts a virtual hard disk file by copying the data from a source virtual hard disk file to a new virtual hard disk file of a specified format and version type. The format
is determined by the file extension of the specified files, either .vhdx or .vhd. Conversion is an offline operation; the virtual hard disk must not be attached when the operation is started.
For more information please refer to following MS articles:
Convert-VHD
http://technet.microsoft.com/en-us/library/hh848454.aspx
Windows Server 2012: Convert VHD to VHDX using Hyper-V Manager
http://blogs.technet.com/b/aviraj/archive/2012/05/06/windows-server-2012-convert-vhd-to-vhdx-using-hyper-v-manager.aspx
Using PowerShell to Convert a VHD to a VHDX
http://blogs.msdn.com/b/virtual_pc_guy/archive/2012/10/03/using-powershell-to-convert-a-vhd-to-a-vhdx.aspx
PS - Convert VHD
http://gallery.technet.microsoft.com/scriptcenter/1dd3c524-e4e6-44cd-9573-406151237139
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support
Maybe you are looking for
-
Downloaded itunes goes out of audio sync
Using Windows 7, fast computer, always had problems with downloaded itunes movies or tv shows going out of audio sync after a few minutes. Used to be able to past onto desktop and then open with quick time - no more problems. But lately, after latest
-
Correlation Set in BPEL (11G)
I was trying to learn the concept of correlation set and did a simple POC. built 3 simple service A,B,C. A -> B -> C -> A. Services A and C are asynchronous and B is one way. Service A has Invoke to B and a Receive from C. Defined Correlation set wit
-
Upgrading Hard Drive on Mac Pro
My Mac Pro's (using OSX 10.5.7) hard drive (750GB) is almost out of space so I bought a new seagate 1.5 TB SATA drive (3.5inch) and I want to install it, and my computer backs up using time machine to an external drive. What is the best way to instal
-
I Tunes 8.0.1 how to configure bitrate of imported musics
How i configure witch bitrate my imported musics will be in to iTunes? i only found how to do this with cd... but to mp3 dont. I have a lot of musics (mp3) in 320kbps and i want to transfer this musics to my ipod touch. I want this musics will be the
-
iTunes does not recognize iPad due to "Unknown error OxE80000565." Does this mean anything to anyone?