Format Not Supported By Premiere Elements

When I tried to import a song in Premiere Elements the m4p format was not supported by the software. Since I downloaded and paid for it once already can I change my settings to something it does support without paying for it again?

Most songs on the iTunes Store are in a protected format - meaning they cannot be used in other programs and cannot be converted. Unless, of course, you purchased an iTunes Plus song:
http://docs.info.apple.com/article.html?artnum=305567
In that case, you can convert by following these instructions:
http://docs.info.apple.com/article.html?artnum=93123

Similar Messages

  • What HD formats are supported by Premiere Elements 10?

    I'm planning to purchase a new HD camcorder, and I want to be sure that my camcorder and my video editing software work together well.  I notice that most high-end consumer camcorders now record HD video in MPEG4-AVC /
    H.264 format. It is noted to be AVCHD 2.0 compatible.  The camcorders allow a choice of frame rates.  The best resolution is obtained with 60 (or is it 30?) frames a second, progressive.  It is referred to as 60p.  My question is: Does Premiere Elements 10 support this format and frame rate?  Will I be able to input my video material in this format, edit it, and create Blu-ray disks without significant loss of quality?  Thanks.

    Though I have a small handful of "consumer" NLE (Non Linear Editor) programs, the only one that I know with 100% certainty, that will perfectly handle 60p is Premiere Pro, but it is anything but "light."
    It could be that newer versions of my CyberLink PowerDirector, Magix MovieEdit Pro, etc., will handle it well, but not my older versions. I do not have any of the Sony Vegas products, so you might post to a Vegas forum and ask. There are several versions of Vegas, and it could well be that one of them will be up to the task. Also, look at Pinnacle (AVID) Studio. I quit using their products, as of Studio 10, and think they are up to 14 now. Also, a newer, updated version of AVID Liquid (my older version did not), might handle it.
    Others might have more current, and hence usable info on other applications.
    Good luck,
    Hunt

  • Adobe Premiere Pro CS6 classroom in a book lesson files "file format not supported" error message

    Hey y'all. I have the creative Suite cloud membership and am learning Adobe Premiere Pro CS6 and have the latest update. I have an iMac, version 10.8.2 and have been going through the lessons 1-8 so far from the 'Adobe Premiere Pro CS6 Classroom in a book' with no problems. So far so good. Then, when I opened Lesson 9 project today, I realized that certain media was off line (see pic below-videos and maps) even though I had been able to open the project. I tried to see if it was a link issue but was unable to select the 'Link Media' option and the system did not give me the option to link media when opening a new project. The strange thing is that I am now able to open some lessons with everything working fine but when I try to open other lessons such as lesson 9 or 10 or 11 I notice media files offline after getting the "file format not supported" pop-up error message when attempting to open a project. It's random as some lessons I had opened previously now give this error message of file format not supported when they didn't in the past whilst others work. I have deleted all the lesson files from my hard drive and reinstalled them from the cd onto my hardrive but the issue persists. Any idea as to why all of a sudden Adobe Premiere Pro CS6 is giving the error message "File format not supported"??? when opening the lessons. I have not changed any preferences. I've included some screenshots though I don't know how much help they will be... Is anyone else running into this issue??? Can anyone help???
    NEVERMIND. I FOUND OUT ON MY OWN WHAT THE ISSUE WAS AND IS NOW FIXED. YAY!

    Why were you trying to link a file in the project to the project file itself? Shouldn't it be a video file or something? Like .mov .wav .avi .mp4 and not .prproj

  • Can't open sequences or import clips - File format not supported

    We have an iMac workstation here running Premiere that will not open projects or import clips.  Here's the sequence of events that led to this:
    1.  Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle".  I tried trashing preferences and launching with plug-ins disabled and received the same freeze.  Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package.  The software launched fine - but none of the Quicktime files in the project were working.  So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder.  Since then - launching the software has generated the below errors.
    2.  Attempting to open any project gives a long error that starts as:  The preset used by one or more sequences in this project requires third-party components that could not be located.
    3.  Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error:  File Format not supported.
    I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2.  None of which fixed the issue.
    I'm thinking about trying a complete re-install of Premiere next.  Any other ideas?
    Here's the details:
    Premiere Pro CC 7.2
    Mac OS 10.8.5
    iMac late 2012 model, 32Gb RAM, 2Gb video card
    Thanks.
    Don Hertz

    I seem to have figured out a work around.  It appears the 7.2 upgrade is making it so that our Quicktime XDCAM 422 clips are not properly recognized.  Clips both currently in a project and new clip imports do not work.  Attempting to import clips using this codec generates the error message:  Unsupported format or damaged file.  This has happened on both an iMac system running 10.8.5 OS and a Macbook Pro running 10.9.1 OS - both of which were upgraded to Premiere 7.2.  In both cases - uninstalling and re-installing Premiere resolved the issue.
    Don Hertz

  • Error message file format not supported

    while importing footage from the sony fs-100 to premier pro cs6, I get an error message that reads "file format not supported", and lists every file in the folder i just tried to import. however, once I exit out of that message window, all of those files are available and seem to have imported without error, in spite of the error message. I have scanned through a lot of it, and I can't seem to find any problems, or unwanted artifacts in the footage or audio. I even placed a few clips in the timeline and exported it, and the exported video was also fine. There doesn't seem to be a problem with the footage but I'm afraid to build this large project only to find something wrong with it down the line. please help me.

    In the folder along with the video files are a number of 'metadata' files, it is these files that Premiere is saying are not recognised, as you have found the video imports fine. When importing using the Media Browser these files tell Premiere how to treat spanned clips amongst other things. As Ann says it always works better if you use the Media Browser for importing any asset.

  • The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

    The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

    GPPNeil
    Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
    First..
    1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
    2. Do the problems exist if you disable the antivirus and firewall(s)?
    3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
    4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
    5. Have you updated the Adobe Application Manager?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
    7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
    13.0 Folder in which it exists.
    But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
    CCleaner - PC Optimization and Cleaning - Free Download
    If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • File formate not supported

    Hello
    This has been bugging me for ages.
    Everytime I import footage I get this warning, File formate not supported.
    I have been just been pressing the "ok" button and carrying on regardless.
    Below is a screen grab of warning.
    Everything works fine after import, its just disconcerting to begin new projects with warnings like this.
    Thanks
    Philip

    What kind of content, and how exactly are you importing the clips?
    I'll wager it's Sony XDCAM, which is  file-based content, and that you're selecting the parent folder to import, either from PPRO's Media Browser or the OS's file browser. If I'm right, then what's happening is that PPRO is trying to import each component file individually, and some of them are not even media files.
    If you drill down into the folder in Media Browser, it will make sense of the mass of file-based content, allowing you to import just what's relevant for editing in Premiere.

  • Epson SX218 doesn't print (client-error-document-format-not-supported)

    Hi there,
    I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
    Here's what I've done so far:
    I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
    I installed epson-inkjet-printer-workforce-sx218 from AUR
    I started cups...
    Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
    I searched the forums for a solution
    I installed cups-usblp and reinstalled all the cups stuff
    Printer got recognized! Yay!
    So, now the printer is set up in cups using the avasys driver. But...
    It doesn't print!
    When I try to print a test page via the cups webinterface it keeps telling me
    Unsupported format "application/vnd.cups-banner".
    The following packages are installed now:
    $ pacman -Qs cups
    local/cups-usblp 1.5.0-1
    local/libcups 1.5.0-1
    $ pacman -Qs foomatic
    local/foomatic-db 1:4.0.7_20110707-1
    local/foomatic-db-engine 1:4.0.7_20110707-1
    local/foomatic-db-nonfree 1:4.0.7_20110707-1
    local/foomatic-filters 1:4.0.7_20110707-1
    $ pacman -Qs epson
    local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
    $ pacman -Qs ghostscript
    local/ghostscript 9.04-5
    Here's my cups error log:
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
    D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
    D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
    I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
    I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
    I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
    I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
    I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
    D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:01 +0100] Report: clients=1
    D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
    D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers=0
    D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
    D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
    D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
    I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
    D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
    D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
    D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
    D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
    D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
    D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
    D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
    D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
    D [01/Jan/2012:18:59:06 +0100] Script header:
    D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
    D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
    D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
    D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
    D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
    D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
    D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
    D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
    I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
    D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
    D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
    D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
    D [01/Jan/2012:18:59:35 +0100] Script header:
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
    D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
    D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
    D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:00:23 +0100] Report: clients=1
    D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
    D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers=0
    D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
    D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
    D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:19:03 +0100] Report: clients=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
    D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers=0
    D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:22:10 +0100] Report: clients=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers=0
    D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:24:21 +0100] Report: clients=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
    D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers=0
    D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:27:26 +0100] Report: clients=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
    D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers=0
    D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
    D [01/Jan/2012:19:37:11 +0100] Report: clients=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
    D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers=0
    D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
    I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
    I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
    D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
    I [01/Jan/2012:19:38:18 +0100] Full reload is required.
    I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:19:38:19 +0100] Full reload complete.
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
    D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
    D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
    D [01/Jan/2012:19:38:20 +0100] Report: clients=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
    D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers=0
    D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
    I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
    D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
    I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
    I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
    I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
    D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
    I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
    D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
    D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
    I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
    I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
    I [01/Jan/2012:20:54:26 +0100] Full reload is required.
    I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [01/Jan/2012:20:54:27 +0100] Full reload complete.
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
    I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
    I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
    D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
    D [01/Jan/2012:20:54:28 +0100] Report: clients=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
    D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers=0
    D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
    D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
    I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
    D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
    I [02/Jan/2012:05:35:05 +0100] Full reload is required.
    I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:05:35:06 +0100] Full reload complete.
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
    D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
    D [02/Jan/2012:05:35:07 +0100] Report: clients=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
    D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers=0
    D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
    I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
    I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
    I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
    I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
    D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
    I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
    D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
    D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
    I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
    I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
    I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
    I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
    I [02/Jan/2012:17:22:51 +0100] Full reload is required.
    I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
    I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
    I [02/Jan/2012:17:22:52 +0100] Full reload complete.
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
    D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
    I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
    I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
    I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
    I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
    I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
    D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
    D [02/Jan/2012:17:22:53 +0100] Report: clients=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
    D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers=0
    D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
    D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
    I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
    D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
    I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
    E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
    E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
    E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
    W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
    E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
    W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
    E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
    Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
    Thank you very much!

    Hi Radhakrishnan,
    ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
    I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
    regards,
    Stewart

  • SMS: unable to open. message format not supported...

    hey folks i've seen a bunch of guys asking this same question on another threads with no reply, is this a OS bug or something? from time to time i received SMS from my contacts and sometimes I am not able to open them and i got a message: "unable to open. message format  not supported Symbian" even though i can read some text from the preview list.
    any workaround?
    thanks!
    Powered by Nokia X6

    try a reset there could be a file in the message which phone wont support
    *#7370# security code 12345 back up your data 1st
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Unable to open message. Format not supported.

    This problem has already  been discussed here however I can provide some more detailed information. Our company runs a network of automatic telemetry stations. The stations send short messages containing some data to the users. Even though the message contains only a plain text and can be displayed on most mobile phones without any problem, it can't be displayed on some Nokia phones, e.g.. N8 and 2630. The model 2630 shows "Message cannot be displayed". The N8 shows "Unable to open message. Format not supported", but the beginning of the message (preview) is readable in the inbox.
    On the sender side the  Wavecom wireless CPU model Q2686 is used. I tried to send various messages using AT+CMGS command but regardless of the content they cannot be displayed on N8 and 2360.
    Please help. If anyone is interested in this problem I can demonstrate it by sending an 'undisplayable' message to his mobile phone number.

    Hi,
    I have N8, and same thing happened to me when i recieved MMS Confg. for using operator internet mobile,  "Message Format not supported"
    about me i change to another GSM operator, and its work now.
    i think u can add an access point manually, go to ur GSM Operator and take the setup details, and from conective > setting > Destinations > Add new acc. pt. 
    Hope this will help u.

  • Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

    I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
    -- The sound is not muted and the volume is set to full.
    -- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
    -- I can't find any related messages in the Event Viewer.
    -- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
    -- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
     - I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
     - I get the error message "format not supported by the device" when I try to change my Default Format
    -- Note that unlike others who have similar problems, I'm not joined to a domain
    I've tried
    *  rebooting
    *  uninstalling and reinstalling the driver for the sound card
    *  "disable all enhancements" in the sound control panel
    (http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
    *  looking in the registry for some registry key (not found)
    (http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
    Computer details
    Dell XPS M1530
    Vista Ultimate x64 SP1 with current updates
    SigmaTel driver version 6.10.0.5866
    **Update**
    I followed the following steps:
        * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
        * Reboot the machine
        * Try to play an audio file.
        * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
    but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
    **Another update**
    Still can't read the EVM. logparser 2.2 can't parse it.
    Found this thread which interested me but isn't applicable to x64 (I think):
    http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
    **YAU**
    Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
    Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

    Hi,
    Thanks for posting in Microsoft TechNet Windows Vista Forum.
    Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
    Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
    Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
    1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
    http://support.microsoft.com/kb/930883
    2. Make sure that these services are started.
    Windows Audio
    Multimedia Class Scheduler
    Remote Procedure Call
    Windows Audio Endpoint Builder
    3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
    System Restore
    ==============
    1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
    2)     Click Restore on the left pane.
    3)     Choose Basic Restore.
    4)     Follow the wizard and click Next.
    5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
    6)     We can also browse and choose certain files and folders to restore. Then, click Next.
    7)     Then choose the folder to save the recovered files and click Next.
    8)     When we see a “Restore is complete!” message, click Finish.
    Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
    Hope this helps. Thanks.

  • I can't get video attachments in gmail to play on my macbook pro.  2 month old macbook pro running lion. says format not supported

    I can't get video attachments in gmail to play on my macbook pro.  Says format not supported. 

    What kind of video?  There are dozens of formats, some don't play on a Mac unless you have the right plug-ins for Quicktime.  There are some things you should download to help you out. 
    http://www.telestream.net/flip4mac-wmv/overview.htm
    http://www.videolan.org/vlc/download-macosx.html
    These should cover EVERYTHING you'd ever encounter (though maybe not).  Frankly, if it's not H.264 or w4v (or both), it doesn't belong on your mac. 

  • Samsung LCD TV  "Format not supported" error message?

    I have been using my Samsung LCD TV Model number LC320SS9-A for years via a HMDI cable.   As of a couple of weeks ago I now get the follow error message,  "Format not supported" on the TV.  Running 10.8.2   2.3 GHz Intel Core i5 with 4GB DDR3 memory.  I know this is really a Samsung issue but I am wondering if anyone else is getting this new message. 

    Could be related to the reducing of supported types that I just noticed the following today posted on their blog:
    http://blog.share.ovi.com/twango/2009/10/you-have-spoken.html

  • Cannot import .fcpxml from Final Cut Pro X to Premier Pro 6 ...'file format not supported'?

    I've exported a project from FCPX into a .fcpxml. Upon trying to import it in Premier Pro 6, an error appears 'file format not supported'. I have searched for possible solutions, but everything I've found is related to FCP 7. Any assistance is greatly appreciated.

    jessikeen wrote:
    Hi Kevin!
    Thanks for your response. 
    The codec is actually MPEG-2  -- so it's not a ProRes codec.
    Other information:
    HDV1080i60; 29.97 fps; 48Hz, 1440x1080 resolution
    Any ideas for us?
    Thanks for responding so quickly ~
    Jessica
    Hi Jessica,
    That is a stickier case.
    You can purchase the Calibrated {Q} plug-in to fill that gap. It might be wise to contact them and see if you can get an educational or volume discount.
    The no-cost solution is a bit more labor intensive: transcode the footage to a friendlier codec prior via the FCP Media Manager prior to the students leaving the program.

  • Pluged in my mac mini with hdmi to my tv and its stuck on a "format not supported" messege. How can I change that?

    I plugged in Mac Mini 2010, to my TV Via HDMI, I changed the resolution on the mac,  and its stuck with a messege that reads " format not supported" how can I set it back to 1080p so I can work?

    Reset the PRAM
    Resetting your Mac's PRAM and NVRAM
    Then if that doesn't get your there, startup in Safe Mode.
    Mac OS X: Starting up in Safe Mode

Maybe you are looking for

  • How to crate a page template for multiple page instances?

    Hello, When I use the Administration Portal to create a page with portlets in the Portal Resource Library, I can choose to use that page it in my portal. The problem is that I can use it only once. How can I crate a page template with portlets so I c

  • Is it possible to datamerge more than one image per page?

    I am building a product catalogue using datamerge.  Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page) What would the coding be for the Data Field Name? Wo

  • IPhone 4S not being recognized by PC

    I tried updating the IOS 6.1 software directly from my iPhone 4s and it verified and promptly showed the connect the iTunes / USB cable screen and when i do connect it to iTunes, absolutley nothing happens. I've tried re-installing iTunes and restart

  • Workaround for MaxTransactionSize in db-adapter?

    Hi there, Is there a workaround for the option MaxTransactionSize? This option doesn't work for a db-adapter reading from a table in an microsoft sql2000 server. I tried to create an adapter using custom sql, but this results in an outboundAdapterSer

  • Icloud email on windows 8.1 not sending

    I just added my icloud (me.com) account and it will receive mail fine, but does not send mail at all. Advanced settings are listed below : username = <you>@me.com email = <you>@me.com Password Incoming server = imap.mail.me.com, SSL = on, Port = 993