Format of a numeric/decimal field
Can we set the format of a decimal field to display zzz.999 without rounding off the value. For example,I have a decimal field with display & Edit pattern set as "zzz.999" and trailing digits limited to 3. If I enter a value 123.456, its ok. But if I put 123.4567 the value is rounded off and displayed as 123.457. Can we limit it somehow to truncate anything extra than 3 trailing digits.
Thanks
Shweta
Maybe not automatically, but you should be able to do this with a little JavaScript in the form.
Mike
Similar Messages
-
Dynamically change the pattern of numeric/decimal field in adobe
Hi, I have a ADOBE form created through SAP.
One of the field in the form is a numeric type and its property under Object>Cell>Display pattern is set as z,zzz,zzz,zz9.99.
I have a requirement that for a particular condition this field should display the values with four decimal places. I am not able to figure out what property to use in the scripting.
I tried fracDigits and Format. It does not work.
The decimal places always remains 2 as set in the display pattern.
Is there any way to change this display pattern dynamically based on a condition?
any help would be greatly appreciated.I found the answer from other discussions in this forum. sorry to have overlooked it earlier.
The answer to my pbm is to use the Format.picture = "zz,zzz,zz9.9999" -
Display pattern not working - add $ for a numeric/decimal field
I've designed a form which has fields where I need to display currency(US) values.
I've made the fields as numeric type. I've added the display pattern as num.currency{} and also tried with num{($z,zzz,zzz9.99)}. But nothing seems to be working.
The amount value passed in the xml input is 7,002.978.
The result that I'm getting now is $0.00
When I changed the field to decimal type and added the same display pattern as above, the result that I get is BLANK: $
I need to format it such a way that it displays $7,002.99 in the form. There's no limit for the leading digits and the digits after decimal point should be 2. Is there a way to get this by changing the "PATTERNS" properties?
Please let me know how I can get the pattern right.
I'm using LC Designer ES2.Hi,
By default it is not going to like the comma in your xml input, so you will need to change the data pattern. Try using num{z,zz9.999}, which works for your example value. With the comma it will treat the value as text and just display what it gets.
If your display pattern is num.currency{} then you will get two decimal places, but that makes the value $7.002,98. I'm not sure how you get $7.002,99 ... is that just a type-o?
Regards
Bruce -
What I've found so far is that the only way to get the % symbol into a numeric/decimal field at all is to set the "display pattern" to display the % symbol after numbers have been entered into the field.
The reason I want the field to be numeric and not text is because I have to run a FormCalc caculation that populates a third field.
(NumericField1 * Numeric Field2*) + NumericField1Thanks for the reply Niall.
I ended up chanigng the numeric field to a decimal field instead, and added the following display pattern: num{zzzz9.99'%'}
So although the user can't enter a % symbol into the field, a % symbol automaticaly populates when the user enters a number.
My criteria involved ensuring that a user could not enter a number with more than two numbers after the decimal, so I also set a trailing digits max of 2 (in the Obect > Field settings)
This is the FormCalc formula I used in the "calculate" event to calculate the salary increase amount request: (DecimalField1 * NumericField2) *.01 + NumericField2
This formula is meant to calculate the salary amount a manager is requesting their employee's salary be increased to. -
How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).
How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).
-
Aodbe form Numeric or Decimal Field
Hi experts,
I am new to adobe form. I want to display, if i enter 1234 ,it will be displayed 12.34 .Can you please suggest me?
Thnaks.
HansHi Hans Bauer,
Do the following:
1. Take the field as Numeric Field or Decimal field from Library.
2. Select the field from Hierarchy.
3. Go to menu> windows> Script Editor.
4. Choose Exit event in the script editor.
5. now write the following code in the exit event of the numeric field/decimal field.
$.rawValue = $.rawValue/100
Thats all what you have to do.
Hope it will solve your problem.
Regards,
Vaibhav Tiwari. -
Numeric, date field data to be in English format
My Characterset on 10g AS & 10gdb, NLS_LANG=ARABIC_KUWAIT.AR8MSWIN1256
In my all arabic screen numerical number & date fields are in arabic. Instead all numeric & date fields should be in English. I have tried settting NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256 on Application Server. But no use & also by doing this just runtime application is doing flip,,ie from left to right.
i know I can query using below
TO_CHAR(hiredate, 'DD/MON/YYYY', 'nls_date_language = ENGLISH')
Is there any way of doing that at database level, so that all fields of applicaton of type numeric & date are in english.
thanksIn reports I am getting Numeric & date format in English. But only forms all these are in arabic.
-
Formatting an inbound Decimal Field
Hello,
I have a decimal field.....>
xxxxxxxxxx.yyyyy
now lenght of xxx and yyy can vary..
now depending on the scenario i may hhave to round off the field to 3/4/5 places afeter the decimal....how can i acheivce this using std.pI functions....
i know of aformat number function ..but don't exactly know how to use it...........pls advice....Jovani,
Depending upon your condition take a formatnum and double click on it and put the format like 000000.000 this will produce 3 decimal points. So depending upon ur requirement put that many.
Also check some more help on this function here:
Is this possible with formatNum
Example of FormatNum usage
Regards,
---Satish -
Data flow fails on packed decimal field moving iSeries DB2 data from one iSeries DB to another
I' trying to use SSIS to move table content from one iSeries DB2 database to another. I'm using the .Net providers for OleDb\IBM DB2 for i5/OS IBMDA400 OLE DB Provider in the connection managers for the source and destination and the test connection
works fine. When I try to run the data flow task however it fails on the first packed decimal field it encounters with the exceptions ...
[select from hydro520 hydroweb2 blpmstr [16]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "select from hydro520 hydroweb2 blpmstr" (16)" failed because error code 0x80004002 occurred, and the error
row disposition on "output column "MSPRIB" (55)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[select from hydro520 hydroweb2 blpmstr [16]] Error: The component "select from hydro520 hydroweb2 blpmstr" (16) was unable to process the data. Pipeline component has returned HRESULT error code 0xC0209029 from a method call.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "select from hydro520 hydroweb2 blpmstr" (16) returned error code 0xC02090F5. The component returned a failure code when the pipeline
engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
...in the progress tab. Can someone kindly tell me what I need to do to get the connection manager to work with DB2 packed decimal fields? Or is it a different issue all together? Thanks tonnes for any help, RoscoeHi rpfinn,
From the Data Types mapping rules between SSIS and DB2, we can see that both the NUMERIC and DECIMAL data types in DB2 are mapped to DT_NUMBERIC data type in SSIS. Now that the source data in your DB2 database is NUMERIC data type, changing the DT_NUMBRIC
data type to DT_DECIMAL is invalid. Besides, if we check the data types of the target External column and Output column from the Advanced Editor for ADO NET Source adapter, the data type should be defined as DT_NUMERIC with Precision as 9 and Scale as 2. I
am not clear where you see the DT_NUMBERIC(9,0) e.g. DT_NUMERIC with Precision as 9 and Scale as 0, but it may be the cause of the issue. You need to make sure the DT_NUMERIC data type also has Scale 2 instead of 0.
If you don’t know how to modify the data type, please elaborate the Data Flow Task of the package so that we can make further analysis. Besides, the error messages you posted are incomplete, it will be helpful if you post the complete error message.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Hi,
I have developed a Module pool program. I have a screen field type DEC. I have two modes, EDIT and DISPLAY. In EDIT mode, when i enter 0.00 into this screen field and press save, the value displayed is BLANK and not '0.00' as required. In DISPLAY mode the value is displayed correctly as '0.00'.
I tried changing the screen field to type CHAR. But the same field variable is declared as TYPE 'p' for underlying calculations. Thus it gives me an 'SCREEN FORMAT ERROR'.
Any ideas how to diplay '0.00' in the decimal field in EDIT mode?
Awaiting your responses.
Regards,
SandeepWhat you are seeing is the stanard way the gui handles these fields in the particular mode(change,display). You can not get around this using the decimal field. Your only solution is to make are character field on the screen as well as character field in the underlying program.
Regards,
Rich Heilman -
The decimal field should accept 0.00 as the input and generate the XML
Hi Experts,
I have one requirement. I need to display the field which take 0.00 as the input and that field should come in the output XML. This field of type decimal. I m using sender proxy. Im populating the value 0.00 to this decimal field, But the proxy is not producing this field in the output XML. Plz suggest me.
Regards,
RamaHI Ravi,
It is accepting the input as 0.00. But i want it as decimal.
Can u explian what is the difference between these two types decimal and string.
It should take the input values in the decimal format. ll it take?
Regards,
Rama -
Can I know the precision and scale of a decimal field using ACEDAO?
Using ACEDAO in VC++, I am trying to retrieve the field details of an Access database (.accdb file) table of which one field is of decimal type. I am able to get the details using the functions of
DAO::_FieldPtr field;
as follows:
fieldName = field->GetName().GetBSTR();
nType = field->GetType() // returns DAO::dbDecimal
lSize = field->GetSize(); // returns 16
lAttr = field->GetAttributes(); // returns 0x000002H
nOrdinal = field->GetOrdinalPosition(); // returns 11
bAutoIncrement = ((lAttr & DAO::dbAutoIncrField) > 0);
DAO::PropertiesPtr props;
DAO::PropertyPtr prop;
int k, nProp;
std::wstring propName, propNames;
props = field->GetProperties();
if(props)
nProp = props->GetCount(); // returns 33
for(k = 0; k < nProp; k++)
prop = field->GetProperties()->GetItem((short) k);
if(prop)
propName = prop->GetName().GetBSTR();
propNames += propName;
propNames += L"\n";
// After exiting the loop, propNames contain 33 properties as:
// Value
// Attributes
// CollatingOrder
// Type
// Name
// OrdinalPosition
// Size
// SourceField
// SourceTable
// ValidateOnSet
// DataUpdatable
// ForeignName
// DefaultValue
// ValidationRule
// ValidationText
// Required
// AllowZeroLength
// AppendOnly
// Expression
// FieldSize
// OriginalValue
// VisibleValue
// GUID
// ColumnWidth
// ColumnOrder
// ColumnHidden
// Description
// DecimalPlaces
// DisplayControl
// TextAlign
// AggregateType
// ResultType
// CurrencyLCID
//But does not have any property named "Scale" or "Precision"
I could not find any function for retrieving the value for precision and scale for the decimal field.
Though I am able to retrieve the field value as a decimal number and get the required information from the structure, I think it is not the right way. Because, what will happen if the data for field is not available in the table?
Is there any other method to retrieve the precision and scale of a decimal type field using ACEDAO?
Thanks.I cannot find a method or property in ACEDAO to retrieve the precision and scale of a field. Maybe you could try get the number of a decimal type and use some mathematical methods to get the precision.
I find there are some way to get the precision by ADO or OLEDB.
For ADO way, you could check this thread:
https://social.msdn.microsoft.com/Forums/office/en-US/883087ba-2c25-4571-bd3c-706061466a11/how-can-i-programmatically-access-scale-property-of-a-decimal-data-type-field?forum=accessdev
For OLE DB , you could use IColumnsInfo::GetColumnInfo to get DBCOLUMNINFO::bPrecision.
https://msdn.microsoft.com/en-us/library/windows/desktop/ms722704(v=vs.85).aspx
Also people in C++ may not familiar with access development, the
Access for Developers forum is good place for access develop issue. You could try there.
Hope this helps some.
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to process decimal field in extract
Hi All
I need to use a extract in TableMaintenace event.
I understood using loop and indexing, we can access teh fileds.
But when i checked in the Debugging mode, Decimal values in hte table are displayed as ####. How to get these decimal fields.
Could someone please clarify this?Increase the field length for you decimal field.
If that doesn't work define the field as an alpha field. -
Default Value in Numeric Input Field in Visual Composer Application
Hi All,
I have developed a visual composer application which has a numeric input field for Hours.
It is mapped to a backend module.
We are using portal 7.31
The problem is that the deafult value of this input field is "0", but the rquirement is to display as "0.0"
The functionality has been tested with input values in decimals and works fine. The problem is when the screen first populates, that field should show "0.0" .
Please advise.
ThanksHi Soumya Chanda,
I don't know of an agreeable way around it. You could have a textual input, but then it doesn't have the numeric control behavior, plus you need to handle incorrect typing (alphanumeric notes).
Sorry! -
How to change the Display Pattern for Decimal Fields dynamically
hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
PrabhuHi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.
Maybe you are looking for
-
HP Photosmart Premium C309g-m unable to print ("check printer documentation")
My printer is: HP Photosmart Premium C309g-m My computer is: Mac (Mac OS X system) After removing a jammed paper (probably the incorrect way), I now receive a message to check "printer documentation" and then press "okay". Tried everything I coul
-
How can I tell if I have SATA 3
Cannot find it in the specs for HP Pavilion m6-1035dx Nevermind, found a post to run PCWizard, it say's I have 6Gbs
-
Contracts/scheduling agreements
Hi, Could anyone suggest me some useful links on contracts/ scheduling agreements? Thanks in advance Aparna
-
Re: Cannot Change Boot Priority To CD-ROM -- G580
Hi, first post to this forum, so please forgive me if I've posted in the wrong place. I have a similar problem with a G580. I've done some searching on this and other forums but so far nothing has helped. Here's the issue: 1. I had a working Win8 i
-
Time to do first Backup in Time Mchine
Hey my Leopard installation has been flawless on several machines; sorry to hear about those with trouble. But if you have a large file collection, be prepared for a LONG initial run on Time Machine. I've got about 1.4 million files, using about 800