Format of external NF number/series is wrong

Hi,
When i was trying to create a returns order on reference field i need to enter the nota fiscal number but when i enter something which is more than 6 characters it is giving this error:
"Format of external NF number/series is wrong"
Can anyone please tell me where this format is defined??
Many thanks...

Hello,
This issue is related to the localization Brazil process. I know that exists some SAP notes to similar issues. But I'd recommend you to check the SPED & NFe forum in the SDN portal.
They can advise you better in this area since it's not related to FI.
REgards,
REnan

Similar Messages

Error: External NotaFiscal number/series is wrong, in MIRO - CreditMemo

Hi All,
Could any one investigate and rectify my issue.
When I'm posting an Credit Memo in MIRO, I'm getting an Error: "External NF number/series is wrong"
Full detials of the error
Message no. 8B 236
Diagnosis
A possible reason is that you are trying to create a complementar / correction with reference to another complementar / correction. This is not possible in the framework of the document flow chosen here.
System Response
Not possible to proceed.
Procedure
o Cancel the preceding complementar / correction.
o Issue a new order with reference to the original billing document.
Details of the Activity happened for the PO
a. PO: 4572043603 Dated: 22.01.2009, with Item: 1 having Qty: 350 with Unit Price: 8.82
b. GR: 5000063901 Dated: 22.01.2009, with Item: 1 having Qty: 200 with Unit Price: 8.82
c. IR: 5105684784 Dated: 22.01.2009, with Item: 1 Having Qty: 200 with Unit Price: 8.82, and Nota Fiscal Type: E1 - status as Doc.Type: Nota Fiscal, Direction Movement: Incoming, NF Partner: Vendor
d. Now doing while a credit memo (getting error as said) in this with Nota Fisal: E4 - status as Doc.Type: Return, Direction Movement: Outgoing, NF Partner: Vendor
Waiting for anyone to response and give me some solution on this error to rectify
Thanks in Advance.
Regards
Dinakar

Self resolved.
Solution used: made PO Status as GR Based IV (ensure that this status is available before any transaction of GR & IR is done for the PO)

How do I format an external HD with Recovery Disk Assistant on?

Hi,
I have seen a couple of threads on this, but I'm still not "Compos Mentis" with how to format an external drive with the Recovery Disk Assistant on.
I have a 320GB which has my recovery disk assistant on - "Don't ask!" - Anyway it goes without saying that I want it all back, but I'll be damned if I can get there. I have managed to view (after a lot of faffing) what I thought was the External Drive, but now realise that it's not...this is what I am now seeing - are these removable via partition (disk0s1 & Recovery HD) as I have been merrily trying to erase them in he belief that they were the external HD and as far as I can see nothing has changed...only my annoyance!
Anyway in short, I need this
A) view the external drive and
B) Format it back to 320GB
Can anyone spoon feed me a way out?
Thanks

I don't understand what you mean by, "how to format an external drive with the Recovery Disk Assistant on."
You don't need to use the Recovery HD to format an external drive. Just use Disk Utility:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

How to format an external HD to be seen by MAc

which format to do use to format an external HD so it can be read with PC and MAc
os mac Journaled?? Extended?
michel

Drive Partition and Format
1. pen Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to MSDOS. Click on the Partition button and wait until the process has completed.

Is it safe to format ANY external drive to Mac OS Extended?

Some Seagate tech told me a while back that Seagate drives should ONLY be formatted with their proprietary formatting and that my data is vulnerable if I use something else. (I may have misunderstood this, but I'm 98% certain that's what he said.) I do remember him saying not to use the Mac's Disk Utility to format the drive.
I want to reformat this drive so that it's 100% compatible with my new Mavericks iMac.
Is there any concern about formatting ANY external drive to Mac OS Extended (Journaled). Or are there some hard drives that should not be formatted to Mac using Disk Utility?
I'm under the impression that all external drives are basically the same and I can format them however I want. No drive is "made" to be formatted with a certain OS or a certain format.
Is that correct?

Formatting a drive simply will remove any data currently stored on it. There is no such thing as "proprietary formatting." Drives come out of the factory with no formatting.
Whatever the person told you it was patently wrong not to mention mis-informed.
To use a hard drive properly with any computer it needs to be formatted with the tool that is required for the operating system with which it will be used. For the Mac you use Disk Utility (the tool) and you format the drive using Mac OS Extended, Journaled (the format.)
Your impression is correct.

When I try to format an external usb drive the progress bar only goes half way then freezes up can anybody help please

When I try to format an external usb drive the progress bar gets to half way then freezes , or stops and what ever time I allow it never gets any futher on , I have to go to the task bar and click quit to get on and the usb drive is not formatted is there a fault with my disk utility program I have updated the system
to lion 10.7.2
Can anybody advise please

Are these new external drives? How are the currently formatted? Have you tried doing this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

I want to format my external drive so that my new imac and my pc can read and write ,what should i do?

i want to format my external drive so that my new imac and my pc can read

Start by partitioning the drive as required for the Mac:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Now click on the Erase tab in the main menu, then select ExFAT from the Format Type dropdown menu. Click on the Erase button. This format is read/write on both the Mac and the PC. If you have a problem with it on the PC, then format the drive the same way using the Windows formatter.

How can a format an external hard drive to Fat 32 format

how can i format an external hard drive to a Fat 32

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS (FAT) Click on the Partition button and wait until the process has completed.

How sort projects by given number serie (ie. date)

Hi,
Right or wrong my 35 000 photos are in the library put in folders by year. Within each year there are projects (approx 30 -70 per year) with project names such as "20100725 closeups of a moose". When i add new projects as days go by and name them by the date series I use, they do not automatically drop into a slot as they would if sorted by the number.
How do I sort projects by their name (ie number series)?
please advice,
regards pyry.

Hi
Right click or control click on a year folder, go down to Keep Arranged By, choose Kind, Name or Manual
gary

Validate External Serial Number

How do I apply a validation mask to an external serial number? For a specific material, I want to only accept a serial number with a certain format when that component is assembled to the parent.
I tried setting up a validation mask for this material, associating the mask group to the material, and assigning EN521 to the EXTERNAL_SERIAL Data Type. But I am still able to enter any number when I assemble the component. Am I missing as step or is this validation not possible?

Hi Alli,
Check the activity rule for EN521 includes the "EXTERNAL_SERIAL" Data Field on which you are doing the mask validation.
Regards,
Andrew.

External Document Number assignment using Bapi_acc_document_post

Hi All Experts and Max,
We want to post th same external document no using BAPI_ACC_document_post, but we are unable to post thatexternal Document no.
Note: If we are posting the same no using transaction FB01 , we are able to post the document , if we are passing the Acc_do_no field as the external Document no.
Our requirement is to post the document no of the e.g A system to B system with th esame document No .
Kindly provide what value we need to pass in the obj_type , obj_key and obj_sys fields of BAPI_ACC_Document_post.
I am aware about the scenario that in case of internal document no creation we will get all these 3 fields from th eBAPI, but we need the values in case of external document no assignment.
We tried with obj_type as 'BKPFF' but we are not able to post the document with that obj_type, In that case Bapi is clearing the exterbal document no acc_doc_no field in the first subroutine.
Note: We are uploading a file in different system with the .dat format and we are using BAPI_ACC_DOCUMENT_POST method.
Please refer the below link for more issue details.
Link:[External Document Number assignment using Bapi_acc_document_post;
Kindly provide the solution.
Thanks,
Rahul Sisodia

Hi All,
Please suggest if you came across such situation. <removed by moderator>
Thanks,
Rahul Sisodia
Edited by: Thomas Zloch on Sep 19, 2011 10:18 PM

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

How do I format an external drive with mountain lion?

How do I format an external drive with mountain lion?

Applications > Utilities > Disk Utility
select the external drive in the left pane
partition and format in the right pane

Assign external delivery number using BAPI_DELIVERYPROCESSING_EXEC

Hi Experts,
How to assign the external delivery number using "BAPI_DELIVERYPROCESSING_EXEC?
For internal no, the BAPI works and I try to pass the parameters "tbl_request-EXTDELV_NO = XXX" to the BAPI , it prompt an error "Unexpected issue of error message (output NR 751)"
Thanks

Hi,
Please check the external number which you are giving is within the number Range defined in Configuration .
regards
Deepak.

Excise Invoice Number Series Change

Hi Gurus
Its very close to end of financial year on 31st march and according to the rules
of Excise.. the excise number series should be changed ..
so plz anyone suggest me how this number series is maintained and how it can be changed

Hi,
If it is related with Maintaining New Number Ranges:
Go to the T ransaction SNUM and maintain the New number range for the Excise Invoices.
Regards,
Anji

Format of external NF number/series is wrong

Similar Messages

Maybe you are looking for