Format of the analytic reports changed in OBIEE11g after restart.

Hi all,
After restarting the BI server, the format of the reports changed.
The analytic reports header font sizes has been increased and the report is not showing in tabular view instead it is showing results as in a notepad.
What might be the issue which caused these changes?
Please help me in regarding this..
Thanks & Regards,
Kalyan.

as such we cant say it is an error from BI.....not sure what might be going wrong or is the tool acting upon.
Once bounce all services and look at it.
UPDATED POST
No need of changing any config files as such for that behaviour.....might be something wrong going with the BI tool.
Never i faced such issue as i was working on BI 11g
Cheers,
KK
Edited by: Kranthi on Feb 23, 2011 11:36 PM

Similar Messages

"recording stopped because the format of the source media changed" Error

I am trying to import video from my digital camera via firewire to quicktime...
the New movie recording screen appears and works, but after a random amount of time (normally just around 4 minutes..) the recording stops and the message appears..
"recording stopped because the format of the source media changed"
I have plenty of disk space, and am sending the output vid to the desktop..
please help.. I have spent 3 days trying to record the vid...
I cannot import via imovie because I want to have the sound come from a different source then the movie.. i.e. Quicktime lets me get vid from DV and sound from "saffire" sound card..
Thanks
Geoff

Jon Walker wrote:
This is an older model Sony prosumer 3CCD camera that records to mini-DV tape.
So does the HC3 and I have to re-set the camcorder output to match the capture settings each time I switch modes. However, I don't use QT for capture since the ability to maintain frame rate is dependent on the platform's CPU power. As you feel the problem is tied to your use of QT Pro, why not download and try the free Vidi dedicated capture utility.
I'll check out vidi. I'm not familiar with it. I've been using this same method to capture clips for several years. I pretty much set the camera once and never have to mess with it again. I don't switch the mode at all during the day.

When i erased the data of my iphone 4s after restarting it is asking for icloud id n pwd i dont have it because it was bought second hand and the owner is not contactable.

when i erased the data of my iphone 4s after restarting it is asking for icloud id n pwd i dont have it because it was bought second hand and the owner is not contactable.
please could somebody help in this context.

You've encountered Activation Lock. Read here:
http://support.apple.com/kb/PH13695
Without that info, you won't be able to re-activate the phone. Apple can't/won't help you with this.

Do you have the way of fix WiFI connection after restart on unlock the macbook pro

do you have the way of fix WiFI connection after restart on unlock the macbook pro with retina

Toddy, see [http://news.cnet.com/8301-30685_3-20004620-264.html?tag=mncol;txt]

I have created a second user on my imac (OSX 10.7.1) and applications won't stay in the dock and my preferences default after restart. Anyone else have this problem?

I have created a second user on my iMac (OSX 10.7.1) and applications won't stay in the dock and my preferences default after restart. Everything works fine with the main user. Anyone else have this problem?

Hi again, ;o)
I found this advice in another thread (here), which you might find helpful...
Unregistering the iMac from .Mac syncing and re-registering it (replacing the computer's information with the .Mac information) resolved the issue.
The .Mac sync information was Reset (i.e. recopied in it's entirety) from the MacBook (the 'good' computer) to .Mac prior to unregistering and re-registering the iMac, so a fresh copy of the sync could be loaded from .Mac to the iMac.
I hope this helps the others who have had this problem.
Regards,
Art
Yang

Can We Display a Tabular Format in the Decision Report?

Hello,
One of my current OPA integrations is replacing an Excel-based application that calculates entity values across rows and columns. In the OPA version, the rows are separated into screens, and the columns - the results - are displayed in a decision report that shows a single value per line, and is not vertically aligned. This makes the results much more difficult to view "at a glance" compared to the legacy solution. I'm wondering if there's any way to incorporate tabular formatting (mainly vertical alignment) within the decision report - does anyone know?
Thanks!
- Patrick

With version 10.3 and the BI publisher integration you can design virtually any format for the decisions you wish. When using BI publisher, a completely customized decision report is quite easy. See the OPM help topic "BI Publisher code for Oracle Policy Modeling" and/or the example that ships with 10.3 for more info. If using the web service to make determinations, you could also post process the XML for the decision report (i.e. using XSLT or code) to produce a table in XML or HTML. Customizing the "default" decision report into a tabular view would probably prove more difficult than the other options.

Re: Display format in the ALV report output

Hi Expert,
In the alv report how to display below format in the output.
Example: Jan 2011 feb 2011 march 2011 .......................
no amount no amount no amount
As you seen in the above output i need Below jan 2011 NO and AMOUNT similar for other months.
Can any one throw some light...............
Regards,
Am.
Edited by: anitha.mava on Nov 5, 2011 12:37 PM
Moderator message : Spec dumping is not allowed, search for available information. Thread locked.
Edited by: Vinod Kumar on Nov 7, 2011 9:31 AM

Hi,
Are you able to populate NO ? If yes i don't see why u can't populate No Amount.
If you are not able to populate No.. just pass the same based on the condition to the (string) field that column is referring to ..
Or are u not able to align the columns ? If yes, you will have to do some hit and trial with write statement ..or better why not use grid display ..
Please provide more details ..
Regards,
Pranav.

Since the last upgrade, FF no longer runs on my laptop! I get the crash report box but it never restarts upon pressing that option. I can't try the safe mode or the other self-help options because no FF browser window opens.

FF worked fine before I accepted the latest update just a few days ago. My friend who lives far away said that she also has problems since the upgrade. When I click on the thumbnail to open FF no window opens, all I see is the crash report. Without the window I can't try the self-helps or give a crash ID (from what I understand from reading the options). None of the options in the crash report restore the browser. When I click on one, the box just pops right back up.
Other than general slowness of my system and some possible hacking which got someone into my paypal account this week, I've had no other computer issues. (I've changed my email address with PP & changed my email passwords in case someone is accessing my machine through my email...I'm not very computer literate...I don't believe this can happen, yet no other options were presented).
Because my friend also experienced this crash issue I think this is totally related to the upgrade & what ever it did to my computer such that FF no longer loads.
Please give me steps to fix this issue without FF running--all the self-help techniques seem to assume that I can run FF, get a browser window, utilize the links therein. I can't get a window open at all!

YAY!! I have Safe mode!!
um, now what?

Repoets in excel format on the web Reports 10g

v_item_c := 'control.'||i.param_name;
:control.report_param_string := :control.report_param_string||'+'||i.param_name||'='||Name_in(v_item_c);
v_rep_server_c := 'hbc-maroon.heartlandbc.org/reports/rwservlet?';
v_conn_strg_c := 'userid='||Get_application_property(Username)
||'/'||Get_application_property(Password)
||'@'||Get_application_property(Connect_string);
v_url_c := 'http://'||v_rep_server_c||'desformat=spreadsheet+destype=webdav+desname=C:\temp\myexcel_output.htm+ENVID='||v_rep_env||'+report='||:parameter.report_sel||:control.report_param_string||'+'||vc_url_temp;
Error
REP-50159: Executed successfully but there were some errors when distribute the output
The report runs fine with destype=file.
But I want this report to be excel spreadsheet and the user view it instantly.
Edited by: user11244023 on Aug 18, 2009 1:03 PM

v_item_c := 'control.'||i.param_name;
:control.report_param_string := :control.report_param_string||'+'||i.param_name||'='||Name_in(v_item_c);
v_rep_server_c := 'hbc-maroon.heartlandbc.org/reports/rwservlet?';
v_conn_strg_c := 'userid='||Get_application_property(Username)
||'/'||Get_application_property(Password)
||'@'||Get_application_property(Connect_string);
v_url_c := 'http://'||v_rep_server_c||'desformat=spreadsheet+destype=webdav+desname=C:\temp\myexcel_output.htm+ENVID='||v_rep_env||'+report='||:parameter.report_sel||:control.report_param_string||'+'||vc_url_temp;
Error
REP-50159: Executed successfully but there were some errors when distribute the output
The report runs fine with destype=file.
But I want this report to be excel spreadsheet and the user view it instantly.
Edited by: user11244023 on Aug 18, 2009 1:03 PM

"recording stopped because the format of the source media changed"

I just got this error
was trying to use quicktime to capture a video
was able to capture another video successfully but for some reason it doesn't like this tape even though it was recorded on the same machine
any thoughts?

Hi,
I received this error also. I was trying to import video from my Panasonic DV camera via Firewire. It would happen randomly, sometimes mid recording so I definitely know no settings have changed as the error states. It is also happening when importing from a different tape.
I haven't imported video for a while but have never encountered this problem before. I may have been using quicktime 6 last time I imported or it could be a Leopard issue?
I had to import a 60 minute tape in bits as this would happen every couple of minutes, very annoying!
Any help with this issue greatly appreciated.
Thanks,
John.

Problem showing the crystal report viewer in form after added the component on it

Greetings
I have a problem running a program. I created a form which I added the component Crystal Report Viewer perfecty but during program execution when I call that form my VS 2012 Ultimate show the following error:
Translated:
Failed to create the form. See Exception.InnerException for details. Error: An exception occurred in the type initializer for 'CrystalDecisions.Shared.SharedUtils'.
Note: If I remove the component from the form. the applications runs fine when calling the form without the component CrystalReportViewer
It is something related to my VS? o just that the actual version 13.0.9 is not yet compatible?

Report.Show?
How about you try:
CrystalReportViewer1.ReportSource = <path to your report>
Or:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
crReportDocument.Load(<path to your report>)
CrystalReportViewer1.ReportSource = crReportDocument
Or, if the report is added to the project:
crReportDocument = New test
CrystalReportViewer1.ReportSource = crReportDocument
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Message was edited by: Ludek Uher

Strange prob, can login only at the end of install, it fails after restart

Hi Every body
I have this strange problem, i don't know where i'm making mistake.
I installed EBS more than 5 times, thought i have made some mistake with pre-installation requirement or post installation requireement, but every time i'm faced with the same problem.
My machine configuration is P4, 3.0GHz, Ram 1 GB, 240 GB HD. with RHEL4 installed. Have created dba usergroup and created user oracle and applmgr made them part of dba group.
I'm doing multi-user installation for Vision Demo data. Logged in as root.
i created a top level directory /sz1/oracle and changed the permission as chmod -R 777 /sz1/oracle
applied pre-installation patch 4198954 as root
verified other pre-installation requirements as per installation guide.
downloaded latest rapidwiz as per note p4159029.
Started installation as root
specified 'oracle' as owner for DATABASE
specified 'applmgr' as owner for APPLICATION
the installation completed with successfull checks on pre-installation requirements and post-installation checks.
After the completion of installation, i logged in from windows client using the path,
http://sri.shan.com:8001
i get the installer home page, i chose the application links and logged in to OAM as sysadmin, verified the status. found concurrent manager was not started.
started the concurrent manager manually by running the script sh adcmctl.sh as root. the service started successfully.
then i re-started the Linux box, logged in as root and tried to run the script adstrtal.sh like
<COMN_TOP>/admin/scripts/VIS_<hostname>/sh adstrtal.sh APPS/APPS
i get the following error message, it is same in all 5 times of installation
You are running adstrtal.sh version 115.14
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adapcctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adapcctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adalnctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adalnctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adcmctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adcmctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adfrmctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adfrmctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adrepctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adrepctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adfmcctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adfmcctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/adfmsctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/adfmsctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/jtffmctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/jtffmctl.sh start APPS/APPS
Executing service control script:
/sz1/oracle/viscomn/admin/scripts/VIS_sri/addisctl.sh start
script returned
ERROR:
Exception in TimedProcess...Failed to execute command = /sz1/oracle/viscomn/admin/scripts/VIS_sri/addisctl.sh start APPS/APPS
Check logfile /sz1/oracle/viscomn/admin/log/VIS_sri/10301137.log for details
Exiting with status 9
when i tried to run these scripts individually,
all the scripts started successfully except adalnctl.sh failed
the error message is
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_VIS.
adalnctl.sh: exiting with status 1
Then i logged in as applmgr, i can run the script adstrtal.sh successfully
at this stage tried to login from windows client using following link,
http://sri.shan.com:8001/oa_servlets/AppsLogin
on the browser i get the following error message
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log
I stuck at this stage and do not know how to proceed.
Verified the Jserv status as per the metalink note 204123.1, 230688.1. and 311932.1
I get the 'IsItworking' page and 'Hello' page with out any trouble.
When i checked the mod_jserv.log file(located at APPL_TOP/Apache/Jserv/logs)
i get the following data
[30/10/2005 11:19:24:439] (ERROR) ajp12: Servlet Error: java.lang.NullPointerException: null
[30/10/2005 11:19:24:456] (ERROR) an error returned handling request via protocol"ajpv12"
[30/10/2005 11:19:24:456] (ERROR) balance : 4552 internal servlet error in server sri.shan.com:16010
[30/10/2005 11:19:24:456] (ERROR) an error returned handling request via protocol "balance"
Any guidance on this issue will be highly appreciable and helpful for me to proceed.
Thanks in Advance to All..
shan

Hello Yogi
Tried as you have suggested
Following is the outcome..
The Adconfig script did not succeed.
Following is the response i got..
error while running adconfig.sh as applmgr
updating context file... completed
upload of context file and templates to database... completed
configuring templates from all of the producttops...
all with status completed
Autoconfig completed with errors.
the logfile for this session is located at APPL_TOP/admin/VIS_<hostname>/log/11031117/adconfig.log
While checking for this log file i found one more on the same path.
It is named 'NetServiceHandler.log'
I have provided a Patial Content of the 'adconfig.log' file
as below
I think i'm making a mistake of running this script with out starting the db..
But i don't know where to find the script to start the db..
Starting AutoConfig at Thu Nov 3 11:17:39 2005
No Version conflict encountered
using context file : /sz1/oracle/visappl/dmin/VIS_sri_xml
Starting synchronization of file system context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature ; Unverified
File system template : APPL_TOP/ad/11.5.0/admin/template/adxmlctx.tmp
Checking for customization to Context template
Warning: Unable to connect to Database
Config Tool CVMHelper started at Thu Nov 03 11:17:47 IST 2005
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector()-->
APPS_JDBC_URL='jdbc:orale:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=SRI.shan.com)(PORT=1522)))(CONNECT_DATA=(SID=VIS)))'
Trying to connect using APPS_JDBC_URL
Exception occured: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to get connection using SID based connect descriptor
getConnection()-->
sDbHost : sri
sDbDomain : shan.com
sDbPort : 1522
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID()-->
JDBC URL: jdbc:oracle:thin:@sri.shan.com:1522:VIS
Exception occured: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
for all the remaining connections also got similar error
Connection could not be obtained; returning null
----------ADX Database Utility Finished----------
StackTrace:
java.sql.SQLException: Could not get connection to the database
Starting synchronization of product tops
AutoConfig Setup Phase
Running Setup Process 5 of 13 for AD_TOP
Executing script in InstantiateFile:
COMN_TOP/admin/install/VIS_sri/adgendbc.sh
script returned:
adgendbc.sh started at Thu nov 3 11:18::14 IST 2005
SQL*Plus: Release 8.0.6.0.0 - Production on Thu nov 3 11:18:44 IST 2005
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ERROR:
ORA-12224: TNS:no listener
[AutoConfig Error Report]
all the filenames in Setup phase and Profile phase has error code 1
apply pahse files has the error code 256
Autoconfig is exiting with status 49
The error in all the places points to absence of TNS listener
Can you please advice on this....
Thanks in Advance
shanmugam

Display changes color mode after restart.

I recently turned off my computer for a couple days and when I restarted my iMac screen is displaying in a strange color mode. It looks like the contrast is turned up and the color depth is in 256 color mode. I've gone into the preferences and tried about eveything I can think of but nothing switches it back to normal.
When I restart, everything goes back to normal for about 3 seconds and then it switches back to this strange display settings again.
I'm stumped, any help would be appreciated.
17" iMac 800 mhz Mac OS X (10.3.9)

Check the settings in Apple menu > System Preferences...> Universal Access > Seeing.
cheers
mrtotes

Date format in the Web layout of Oracle 10g Reports

Dear all,
I want to change the date format in the oracle reports. I am using weblayout & paper layout. I have changed format mask using property inspector. It appears in paper layout. How can i get in the weblayout, please help me.
With Regards,
Srinivas

Hi Srinivas,
I think whatever applicable in Paper Layout should be applicable to Web Layout also.
Regards,
Raj

Internationalization of date filed in the webi report

Hi,
When i develop a webi on date column report in english US locale, the date values will be displayed in some mm/dd/yy format by default.
But i want to show datetime values in the roport i.e. mm/dd/yyyy hh:mm:ss am/pm kind of thing.
I can do this by formatting the report column to custom required format.
But if i do this my report then i am limiting the internalization capability of my report.
Is there any way to show the date time format of the date which changes with browser locale ( i mean which supports internationalization)
Thanks in advance

Hi All,
Got one solution =formatdate([object];"INPUT_DATE")
or
=formatdate([object];"INPUT_DATE_TIME")
May it helps to some of you who is facing the same issue.
Let me know if there is any more alternatves for the same

Format of the analytic reports changed in OBIEE11g after restart.

Similar Messages

Maybe you are looking for