Format of variable imported from FrameMaker file

When I import my FrameMaker files into RoboHelp, at least one of the variable formats changes. That is, a variable format containing a superscript character gets removed when imported into RoboHelp. Is there a way to fix this variable format in RoboHelp or do I have to convert this variable format to text in FrameMaker before importing into RoboHelp.
I am using the Technical Communicator Suite: FrameMaker 8.0 and RoboHelp 7
Thanks

I created a test project and imported one chapter.
The results of the superscript were the same, that is, no superscript: C3 instead of C3. However, there is an exception to this behavior. If there is a cross reference, the cross reference retains the superscript.

Similar Messages

How can I get all of my graphics to import from FrameMaker?

I am evaluating Robohelp HTML version 9, which I'm considering using for single-sourcing FrameMaker 7.1 files.
I imported my FrameMaker files, and only 2 out of 75 graphics were imported.
The results window shows that all FM files were imported successfully.
However, in the Project Manager, only these two files appear.
The graphics are BMPs, the same as all the other graphics.
Everything about them seems to be the same as all the other graphics.
So I prepared a TEST FrameMaker file. I placed the two graphics that had imported successfully first, along with a selection of the other graphics. Guess what? All of the graphics imported successfully into RH.
Feeling optimistic, I imported my FrameMaker project into RH again, using the same TEST RH project. Guess what? Only the two original graphics appeared and no others.
Can anyone help me solve this mystery?
Thanks so much!

Sounds like an issue with an individual graphic, not with the process itself. If the 2 successful graphics are the first or last in your project, I'd start testing by importing the graphics in closest proximity...otherwise you may have to import in batches to find the offending file.
If you have a graphic in a format other than that of the "successful" graphics, you may want to test that format in particular.
One thing to consider: As I'm sure you know, any missing resources (fonts, graphics, xrefs) and any errors in updating your book will keep FrameMaker from operating smoothly. If you are sending FM info elsewhere (PDF, HTML, Help) then these subtle deficiencies can cause problems with info sent out of FM as well. "Fix" your FM files and you might solve seemingly unrelated issues elsewhere.
*Note: You mentioned you're testing single sourcing...FM7 files will require import to RoboHelp. With an eval copy of TCS3, you'd be able to create a link to FM10 files, allowing you update the RH9 via the FM10 files. It is a similar process, but by linking, you'll eliminate the importing and/or post processing of the HTML and significantly reduce the time needed to update your RH content.
Also, when purchasing Adobe product, consider Suite purchases and maintenance contracts...I save tons of USD by doing this. See the math at http://blogs.roundpeg.com/2009/12/strategies-for-purchasing-adobe-software/
-Matt

Importing From Flat File with Dynamic Columns

HI
I am using ssis 2008,i have folder in which I have Four(4) “.txt” files each file will have 2 columns(ID, NAME). I loaded 4
files in one destination, but today I receive one more “.txt” file here we have 3 columns (ID, NAME, JOB) how can I get a message new column will receive in source. And how can I create in extra column in my destination table dynamically …please help me

Hi Sasidhar,
You need a Script Task to read the names and number of columns in the first row of the flat file each time and store it in a variable, then create a staging table dynamically based on this variable and modify the destination table definition if one ore more
new columns need to be added, and then use the staging table to load the destination table. I am afraid there is no available working script for your scenario, and you need some .NET coding experience to achieve your goal. Here is an example you can refer
to:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

Error While Importing from EIF file into AW

Hi All,
I am facing the following error while importing from EIF file into AW using AWM as well as from sql prompt.
java.sql.SQLException: ORA-36786: (IOSEC04) File POCAW/abc.eif does not exist or cannot be accessed.
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at line 1
at oracle.olap.awm.eif.eifimport.ImportDialogActionThread.doExportOrImport(ImportDialogActionThread.java:172)
at oracle.olap.awm.eif.EifDialogActionThread.doAction(EifDialogActionThread.java:58)
at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
i have already created the directory pocaw.
i have done the following steps :
CREATE OR REPLACE DIRECTORY POCAW as 'D:\Olap_POC\export';
GRANT all ON DIRECTORY POCAW to PUBLIC;
execute dbms_aw.execute ('aw create ''POC_AW''');
execute dbms_aw.execute('cda pocaw');
execute dbms_aw.execute('dtb attach POC_AW rw');
execute dbms_aw.execute('import all from eif file ''/abc.eif'' dfns update ');
any idea or thought would be appreciable.
thanks n advance
anwar

execute dbms_aw.execute('import all from eif file''/abc.eif'' dfns update ');
Maybe one of the following file names could help
(have never tried it):
''abc.eif''
''POC_AW\abc.eif''Yes,
you don't need the slash. CDA is like setting a default directory.

Import From CSV File statement runs forever, no error, does not finish

Hello,
I am trying to import a CSV file in a JAVA program, with the following statement:
IMPORT FROM CSV FILE '/debug/testdatabase/FILE.csv'
INTO "JOSEPH"."TEST_TABLE"
WITH COLUMN LIST IN FIRST ROW
RECORD DELIMITED BY '\n'
FIELD DELIMITED BY '\t' ERROR LOG '/debug/testdatabase/file.err'
THREADS 10
BATCH 10000
I have two HANA instances on different machines A and B:
Both machines run HANA version 1.00.74.00.389160 (NewDB100_REL), while the OS is
SUSE Linux Enterprise Server 11.1 on machine A and
SUSE Linux Enterprise Server 11.2 on machine B.
The statement above runs fine on machine A and the rows are imported properly from JAVA as well as when executed from HANA Studio SQL console.
If I copy the file to machine B and try the exact same statement with the same file, it does not finish (neither from JAVA nor from HANA Studio SQL console). There is no error either. It cannot be cancelled, only a HANA restart stops the statement. Also the sample file I use has only 2 rows, and memory does not seem to be a problem.
I seem to have a similar problem to the one described here, but the answers there do not help me: http://scn.sap.com/thread/3396582 I specified the record delimiter, and I used a python script to check for any strange characters that are not supposed to be there, but didn't find any.
If I copy the file to my windows PC and use the "File Menu -> Import -> SAP Hana Content -> Data from Local file" function, it imports the file correctly into B, but I need to be able to do it from JAVA.
Machine A administration view:
Machine B administration view:
If you have any idea what might cause this behavior or where I can find more information on this problem please give me a hint.

Hi Joseph,
First from the pics, the revision of your SAP HANA instance is 73 instead of 74. Since I have no identical environment, I cannot test it for you. But can you try the simplest scenario? You can create a table with only one column table try to import a CSV file with only one row.
Best regards,
Wenjun

"Import from Text File" & "Upload from Clipboard" icon not appearng in F110

Hi Experts,
While making the payment to the vendors through TN F110, in "PARAMETER" screen just next to 'STATUS' screen, there is a vendor field for selection in range and just ahead of this there is an icon for multiple vendor selection ( Bold arrow mark ). If I click on that multiple vender selection icon ( on bold arrow mark ), an another screen opens for multiple selection for vendors. In this screen 'Enter, Copy, Delete etc' icons are appearing at the bottom of the screen but "Import from Text File" & "Upload from Clipboard" icon are not appearing there.
Can you please let me know how to bring that icons there?
Points would be awarded.
Rgds,
Shailesh

Hi Ravi,
I have not yet created anything and have just entered the parameter. In the multiple screen for vendors there are 5 fields for individual and 5 for range selection. Even you can put more than five range selections or individual selections by clicking on the page button but there I am not finding these two icons.
Can you please check at your end and let me know if you are getting or what to do to bring those two icons in F110.
Rgds,
Shailesh

Problem in importing from dmp file

Hi ,
I am facing problem while importing from dmp file on unix server
Error is as follows :
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
Export taken was with user xxx@yyy
import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
please help me out.
Atul Chougule

I tried with FROM USER / TO USER , but the result is same.
$ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully
I am stucked up ,Dont know what to do .

Error importing from BIAR file (BO XI 3.0)

Dear BO community,
I am using the BIAR tool for backup purposes. For my backup, I use a properties file as input which looks like the one shown below:
action=exportXML
exportBiarLocation=C:/Temp/BOBackup.biar
userName=Administrator
password=XXX
CMS=XXX:6400
authentication=secEnterprise
includeSecurity=true
exportDependencies=true
exportQuery1=select * from ci_infoobjects
exportQuery2=select * from ci_systemobjects
exportQuery3=select * from ci_appobjects
exportQueriesTotal=3
The file creation seems to work without any problems. A file is created. However, when importing the file into another CMS, I am getting the following error:
Failed to open the BIAR file. Reason: com.businessobjects.sdk.biar.om.internal.iw.ObjectManagerIWException:Input/Output exception occurred: 'Couldn't find entry 'BusinessObjects.xml'.
I have opened the BIAR file using a ZIP program and checked that there is no "businessobjects.xml" file in there. When creating BIARs using only a single query, this file exists and the import is no problem.
Does anyone have an idea what's happening and can help me?
Thank you and best regards!

Hello ALL,
I have the same problem when I am trying import from BIAR file. Please tell me how you resolved this issue.
I did not understand much from your previous message.
We are using BO XI R3.1 and below is the error message that Import Wizard is throwing.
Failed to open the BIAR file. Reason: com.businessobjects.sdk.biar.om.internal.iw.ObjectManagerIWException:required dependencies not found target system : 'AWAS3XkMSEtGn1TXI370kAU'
In both pc BO version is boxir3.1 sp3 and currently i m using windows xp professional version 2002 sp3
Thanks
Saurabh shivam

TS1424 I have just opened iTunes and only the music that I have purchased from the iTunes store is being shown: I can't find any of the music that I have imported from a file. Help?

I have just opened iTunes and only the music that I have purchased from the iTunes store is being shown: I can't find any of the music that I have imported from a file. Help?

See this post.
tt2

Can you use a subquery when importing from a file?

I was wondering if the DBMS_DATAPUMP API allows using a subquery (DATA_FILTER) when executing an import from a file?
I am unable of limiting my data when creating the export file because my subquery requires a database link, which is not an option on the server I'm working on. So I'm wondering if I can limit my data on the import from a file, rather than the export?
Thanks for any advice...
ivalum21

I was wondering if the DBMS_DATAPUMP API allows using a subquery (DATA_FILTER) when executing an import from a file?From the documentation I would say yes:
SUBQUERY:
Specifies a subquery that is added to the end of the SELECT statement for the table. If you specify a WHERE clause in the subquery, you can restrict the rows that are selected. Specifying an ORDER BY clause orders the rows dumped in the export which improves performance when migrating from heap-organized tables to index-organized tables.
«

Color import from web files feature

There is new feature mentioned in CC specs:
NEW Color import from web files. Import color swatches directly from HTML, CSS, or SVG files — for inspiration, or to easily match the color schemes of existing web content.
Where is it placed? I was unable to find something similar in menus/toolbars/palletts.
Thank you!

In the swatches palette, open a file - then you can select a CSS, HTML, or SVG file in addition to ACO and ASE files.

Importing From Excel file will not import assignments correctly where there are more than one assignment per task

I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew Payze

Andrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John

I am able to generate PDF from Framemaker file but not able to generate pdf from book in robohelp

Hi,
Using robo help i am able to generate pdf from a single framemaker file.
but when i am importing whole book then i am not able to make it.
And also it is not showing any error on console
It goes to hang like situation and i have to close it from task maneger.

Ok, silly question - why are you bothering to try and create PDFs from RH when you've got FM? FM to PDF produces great results; RH to PDF involves having to go through Word - i.e. RH - Word - PDF = too much work IMHO.

Pages Importing from pages file to another pages file

Is it possible to Import from a separate pages file to another pages file
IF so HOW?????

Tulse, I'm using Pages 2 too. The first thing I'd tried this on had only a simple drop cap in a text box, fixed on page. That didn't copy - or at any rate didn't paste. The text box had been sent back to overlay it with inline spaces to clear the capital. These reproduced, but the capital didn't. Neither did kerning or baseline adjustments, nor my inserted guides for "leading" the text to the same depth on every page
Also page set-up details were not transferred in this way: i.e., if you change the margins in a template (even the blank one) the margins don't transfer. Logical enough, page set-up belongs to the document, not the section.
Looking at this again, in the Extreme Newsletter template, imported graphics transferred, and inserted text transferred, but layering and placement information did not. I'd made my own pages by altering this, generally using text boxes or shapes to compose picture pages rather than using those in the template. But the copied and pasted sections were all over the place.
So it may be the case that if you're copying from a section to a document with identical layout, page set-up & etc. to the one you're copying from, the result will contain most of the content. But the layering, placement on page of fixed objects, etc., would seem to be decidedly iffy.
I've tried it on title page sections, where the info in fixed text boxes copied, but neither their placement nor relative placement, and (in the newsletter template) with both my own and the provided sections, with no consistent results. If it works in some cases, then that would be handy.
It's easy enough to try, and undo if it doesn't work.
But it's certainly no subsitute for being able to insert one Pages document into another; nor even always bits of it. I'd be inclined to conclude that copying and pasting in this way uses something less than the full Pages file format.
Cheers.
iBook G4 Mac OS X (10.4.7)

Importing from FrameMaker

I'm planning on creating a help system from existing
FrameMaker files. I've read the RH help file for advice, but the
final output still doesn't look right. In particular, RoboHelp
messes up bullited and numbered lists. The #s aren't wrong, but the
spacing and alignment are off. Any advice on importing FrameMaker
documents into RH5/6 would greatly be appreciated. I don't want to
have to convert to Word.
Also, I saw an Adobe webpage that mentions Adobe is planning
better integration between its technical publication software -
i.e. FrameMaker. Does anyone have any further information on this?
I'd love to see better FrameMaker support distributed in a RH
update.
Thanks in advance - Nick

Hi all
As this thread is dealing with FrameMaker, I'm moving it into the FrameMaker Integration forum.
If you are watching it via E-Mail (the default setting) there should be nothing you need to do. You will still see notifications of any activity.
Cheers... Rick

Format of variable imported from FrameMaker file

Similar Messages

Maybe you are looking for