Format of WCS template file for mac-address filtering

I am looking for the format of the template file used for WCS Mac-address filtering.
I need to know how the fields are delimited within the file.

Sample csv file :
#MAC Address,Profile Name,Interface,Description
22:22:22:22:22:22,profile8,management,cisco
00:00:00:00:00:01,myprofile,int1,First filter
00:00:00:00:00:02,,management,Second filter
00:00:00:00:00:03,,,Third filter
Note: "MAC Address" and "Description" are mandatory fields

Similar Messages

Time Capsule Set Up - SSID Broadcast and MAC Address filtering

How does one set up TC for MAC address filtering, and also to disable SSID broadcast? Apple store salesman assured me I could do both, but had no idea how. I can't find anything in the set up. I am used to looking at Linksys routers, so maybe it is buried somewhere.

Selecting only "Timed Access" doesn't really fully activate MAC Address filtering. Even you have that enabled any wireless client can join the network (provided they know the password, if you have any and the SSID, if disabled). You also need to do this:
In the AirPort Utility > Manual Setup > Access screen, the MAC address of the TC (defined as "default") is always listed. Select that and press "Edit" and on the next page, under ".... set the default network time limits" select No Access from the drop down list and then that will prevent computers that aren’t on the access control list from accessing the AirPort network. Is this what you wanted?
This is applicable to the new TC (I didn't have a old one, so can't comment) and it's undocumented. It took me hours to figure out. Hope this helps!!!

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Is Final Cut Pro the only software that can open video .MXF files for Macs?

Hello,
Many thanks in advance for your attention.
Trying to find software that will edit .MXF Video Files to work with Mac.
As the edit is simple, prefer iMovie, but happy if the Conversion software only works with FCExpress (or even FCPro if that is the only alternative).
1. If it matters, .MXF (Material Exchange Format) Video files came from shooting on a Panasonic 500 P2. Originally downloaded onto a Windows system, using Adobe Premiere.
2. I just want to see and convert some of the shots I did for my Reel, etc., but I have a Mac.
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
4. When I attach an External HD with backup files of all the footage shot, they show up named as .MXF files. They appear as VLC files (VLC icon), but the suffix is .MXF.
5. When I try to play them as VLC files, they won't play. It seems they start to play, but then the VLC software quits.
6. So I have tried downloading some software on the Internet that Google says converts .MXF files.
I tried: iSkysoft Video Converter, AVCWare Mac Video Converter, MPEG Streamclip, and a couple others. They all seem to have basically the same conversion setups, but when I click to pick one .MXF file, none of them recognize it. (The file in my Browse window is greyed out).
7. MoyaVideo Converter for Mac recognizes the .MXF file, but when I hit the "conversion" button - I tried a couple different settings, all it seems to convert is the first frame. Even if the .MXF file says a clip is 123MB or 43 seconds long, etc.
8. I can't even watch the clip in Preview. Press Play and it is just the first frame.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
10. And I have read elsewhere that only Final Cut Pro has a codec that will open .MXF files. If this is so, why do the above companies claim to have software that opens .MXF files for Mac?
11. Isn't there a further problem if I can't even see the video using VLC? Or is that because I am using Mac and need FCPro with the right codec?
Anyone's help would be greatly appreciated.

MXF files from P2 can only be imported using FCP. iMovie can't, nor FCE...if you are talking about APPLE software. Avid deals with MXF files natively. But FCP will ONLY import them if the entire P2 card structure is intact. Please tell me that you have the entire P2 card backups. If not, then it won't work. If you do...then here is the process for importing into FCP:
P2 Workflow with FCP 6
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
Then you need someone to provide you with QT files of this footage. None of them work with P2.
NONE of the converters you listed will work... Sorry.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
That software is to get it to work with Final CUt Pro natively. What it doesn't do is convert the footage to QTs. There is also Raylight and Calibrated...but again, they are for FCP.
P2 is a professional format, and to use it you need professional software. iMovie won't work...nor will FCE. If you need to work with it in those formats, you need to have someone import the files and convert them to AIC (Apple Intermediate Codec).
HD Log might work...but not sure what QT format it converts to. A demo is available.
http://www.imagineproducts.com/index.php?mainpage=product_info&cPath=1&productsid=4&zenid=b2buo1aguk3cplmg23jn05aai7
Shane

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.

In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

My Lightroom 3 DVD is broken, i need a Download File for Mac. I still have my Serialnumber.

My Lightroom 3 DVD is broken, i need a Download File for Mac. I still have my Serialnumber.

Hi Stefan,
Please go through the link below to download Lightroom3.
http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Please go through the 'Very Important Instructions' on this page to initiate the download.
Regards,
Anand

What program do you use to open the installer file for mac?!

for some reason it wants to use matlab. i know how to fix this problem myself if i knew what program to use to open the installer... but i cannot find that information anywhere. can someone please help me. what program do you use to open the java installer file for mac!?

osx - Why is Adobe Flash Player downloaded as a ".dmg.mdlp" file? - Super User

In Yosemite I cannot locate the My Templates file for Pages.

In Yosemite I cannot locate the My Templates file for Pages.

When you select "new" "My Templates" should be at the bottom of the Sidebar.
The second line is in your bio and appears when asking a question. You can change it by clicking on bunnygrl to open your Bio to edit.

2012 I purchased CS6 Design & Web premium for students for WINDOWS. Now I want to buy a macbook. Can I download the installation files for MAC OS X with my licensed serial number for free?

2012 I purchased CS6 Design & Web premium for students for WINDOWS. Now I want to buy a macbook. Can I download the installation files for MAC OS X with my licensed serial number for free?

Hi There,
We would like to inform you that you have got the serial number for Mac, it would not work on Mac machine as it is OS specific.
If you wish you use a mac machine that you can swap the platform please refer the below mentioned link.
Link: Order product | Platform, language swap.
Contact support via : Contact Customer Care
Thanks,
Atul Saini

Shell executable file for Mac OS

Hi ,
Can you translate the batch file of windows in corresponding shell executable file for mac?
The batch file actally conaints following statements:
REM Launch script
"C:\j2sdk1.4.0\bin\java.exe" -server -Xmx128M -DdaffodilDB_home=C:\DaffodilDB2_3\databases -cp "C:\DaffodilDB2_3\lib\DaffodilDB_Common.jar;C:\DaffodilDB2_3\lib\DaffodilDB_Server.jar" com.daffodilwoods.rmi.DaffodilDBServer "start" %1 %2 %3 %4 %5 %6 %7 %8 %9
Thanks
Ashish

Thanks for your reply, but is it not seems to be the shell file for Linux or Unix? will it work in Mac system also? what would be the name of file where I save these lines?
Thanks again

Can you convert a favourites file from windows to a bookmark file for mac?

can you convert a favourites file from windows to a bookmark file for mac?

I can't answer for Internet Explorer but you should be able to export Bookmarks from FireFox. If you can't export from IE you may be able to import from EI to FireFox first.
In FireFox, menu BookMarks>Organize Bookmarks, then in the pane which opens, menu File>Export (that's how it works on Linux so Windows should be broadly similar). The result should be an html file.
You may be able to import this into Safari on your Mac; certainly you should be able to import it into FireFox and perhaps from there to Safari if necessary.

How secure is MAC address filtering?

How much protection and security from snoopers will simply having a open network with only MAC address filtering provide me? I have a Nintendo DS on my network which doesn't connect to WPA protected networks so my only other option is WEP128. Is this better than address filtering?
Does hiding my network have any real extra benefit?
Thanks.

Duane wrote:
...and get one of those Nintendo WiFi dongles for the DS.
The Nintendo Wifi dongles are to be used with a PC running Windows XP to create a wireless network for the DS to connect to. It is not used by a DS to connect to a wireless network.
I believe this is understood, since all DSes have WiFi built in. I guess I should have expressed myself more better!
The dongle also is not compatible with a Mac and Nintendo no longer sells them.
This I did not know. Oh well, it was just a suggestion.

How to disable mac address filtering

Hello I have a macbook pro. I am using a Westell 7500 wireless router and my hp photosmart 110 printer stopped working, saying that "MAC address filtering may be enabled on your wirelss router". Not sure how to dissble this and/or why it all of a sudden was enabled. Printer had worked perfectly for 2 months previously since installation of new wireless router/internet in our home. Any help is appreciated!

You need to use AirPort Utility to change any of the AirPort Extreme's settings.
However, like Bob Timmons said I don't believe the tech really knows what he is after, and is lost in the weeds regarding MAC Address Filtering.
Perhaps you can ask for another technician who understands you are using an AirPort Extreme. Your Roku box should not require so much effort to configure.
Have you read these instructions?
http://support.roku.com/entries/244199-how-do-i-set-up-my-roku-player
I don't have a Roku but it seems very similar to my Blu-Ray player. Account registration and setup is performed on a computer by going to the address www.roku.com/link in Step 6.
It should not be necessary to change anything at all with your AirPort. Just make sure the Roku is within its wireless range.

Mac Address Filtering

I have 1252 autonomous APs acting as non-root bridges and 1242 autonomous aps connecting to the 1252s. I wish to lock down which 1242 access point can associated to which 1252 access point. I don't want the 1242s to roam.
Any suggestions on how to config this?

Here is the URl for the configuration for the AP Mac address filtering follow the configuration guide which will help you :
http://www.cisco.com/en/US/docs/wireless/access_point/1200/vxworks/configuration/guide/bkscgch5.html#wp1028504

Format of WCS template file for mac-address filtering

Similar Messages

Maybe you are looking for