Format SAP Script / AIF - DINA vs LETTER

Hi all,
we have in my company several documents which will be printed in DINA4 and LETTER. At the moment we have 2 output types and 2 SAP Scripts (one with DINA4 and one with LETTER). In the next month wee will redesign these documents. How can I use 1 SAP Script or AIF also for DINA4 and LETTER? From my point of view it's not possible with SAP Script. Is it possible to use one AIF also for DINA4 and LETTER?
Regards
Michael

Hi again,
I tested with LETTER printer. The good thing is that it did not get stuck at the printer, but it seems that when printing ZMG to a Post-Script printer, the header is cut off. When printing to a PCL only printer, the footer is cut off. Both cases default was LETTER. To verify, I also checked other outputs (DINA4 / LETTER) and they both print the same on the PS and PCL printer -> successful.
I shift windows at top of the page a little bit to buttom and buttom windows a little bit to top (top margin 1 cm, footer window margin 27 cm). I will check again.
Any other idea?
Thanks & regards
Michael

Similar Messages

Check Box With Tick Mark on Sap Script

Hello All,
We need to add a check box with tick mark on Sap Script.Please can anyone let me know how can we add it.
Regards
Amruta

hi amruta,
The soluti as an image into on to your problem can be to use the symbol icon as told , but this may show in preview not in print.
I too faced the same problem.
So what i had done is created a new window with the diemnsions of the chekc box with border thcikness 8 tw and inside that window place a checkmark symbol.
if this checkmark symbol also does not show up in print preview/ doesshow in print preview and not in print then you can scan a chekcmark image and upload it into business document server as a BMP/ TIFF image and use this image in your checkbox window.
Hope this solves your problem.
Warm Regards
Venugopal.T

SAP SCRIPT FORMS with UNICODE FORMAT ??

Hi guru's,
this is sunny newly joined in sap forum,am ABAP doveloper .
now am extensivelly working on upgrradation project(4.6B TO ECC6.0) , my work perticularlly on UNICODE
>> now am working on SAP SCRIPT FORMS, so could you please let me know how to check the scripts in UNICODE FORMAT .
>> Is that usefull to check with UCCHECK
Its urgent
Best Regards
Sunny..

SAP Scripts needs no checks. but you have to keep attention to the fact, that the spoollists must be converted manually by a report written by SAP, and this report is not able to transform sapscripts which are still in the spool. After unicode conversion every sapscript spoollist is lost!

Problem with sap script formatting?

hi,
can anyone please tell me how do we reduce the fony size in sap script, actually i have used it with character format by giving font name as helve and size as 6 pt but its not reflecting , what can be the problem? or my procedure is wrong.please help me out

ok character format is the wrong thing
just use paragraph formats for that.
if you are insisting to use character formats you need to use the syntax as well.
e.G. if you have defined yourself a characterformat lets say 't' like tiny, thnen the syntax in your form will be:
SL | <t>you text</>.
if you are using paragraph formats it will be
SL | your text
but now you should edit the font properties of that paragraph format

How to print last page in sap script in ladscape format?

Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
Pravin

Hi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam

In SAP Scripts How to write the fields 90 Degrees to regular format

Hi ,
I am working with SAP Scripts . Sometimes you may want to print text vertically.
I have got a requiremnt in which there we have to write some data which is to be written 90 degres to regular output.
please let me know if there is any printer setting for that .
Regards.
Rohit.

Dear friend,
For printing the text verticaly you need to made a
print controle at printer level.
select a command and in that you have to go in tab general
attribute.
and in front of :Include Printer Control: give the z print controle.
in my company basis people had made one print controle
ZR090.
YOU have to use this command two times between
the text .
first command will move the printer at 90 degree and then
write the text and second will move back to horizental.
I dont know how this ZR090 can be made.
rest wht i have written is very true and currently working.
hope this will solve your problem.
rewards are expected.
Thanks and Regards
vivek kumar srivastava

Driver program for the Dunning letter SAP Script

Hello All,
Can someone please tell me how to find the "Driver program for the Dunning letter SAP Script". I checked the Transaction OB96 but I dont find any Dunning scripts here i.e., the standard Dunning letter SAP Script F150_DUNN_01.
Is there any Transaction like NACE of logistics for FI module to find the Driver programs. My requirement is to find the Driver program for the Dunning letter SAP Script and have a new Driver program instead of the standard SAP given driver program. Example is in transaction NACE we can change the driver program for Invoice like from RVADIN01 to ZRVADIN01.
Thanks and Regards,
SNK.

Yes you can, using FIBF, change the FM associated with event 1720 like when SapScript is replaced with SmartForms. Look at [Define Dunning Forms (with SAP Smart Forms)|http://help.sap.com/saphelp_46c/helpdata/es/7d/c7a0a535e1d311ba4d0800060d888b/content.htm] for reference.
But notice
- PRINT_DUNNING_NOTICE call many FM of the same FG which share the same global data area.
- During following upgrades of your system you will have to manage a copy of standard.
Regards,
Raymond

How to change the format in sap script

Hi,
I am working on a report which calls a sap script and i have to modify the script i.e. the values which are displaying in it. i had never worked on SAP SCRIPTS ,plzz provide me guidlines how to change the format of the data displayed in it.

hi,
this will give you the whole idea about the scripts in SAP the t-code is SE71.
refer this link::
[SAP SCRIPTS|http://help.sap.com/saphelp_40b/helpdata/en/d6/0dc169494511d182b70000e829fbfe/applet.htm]
[WIKI|https://wiki.sdn.sap.com/wiki/display/ABAP/FormPrinting-SAPscript%2CSmartforms]
regards
sarves
Edited by: Sarves Sombhatla on Feb 20, 2009 1:38 PM

Calling SAP script program in BAPI and want to display in html format

Dear All,
I am writing bapi and calling sap script program in it.
I want output in html format pl suggest me
same coding is working for report giving error in sapscript only.
types: begin of tt_html,
             html type w3html,
       end of tt_html.
data: list_tab type standard table of abaplist.
SELTAB-SELNAME = 'S_INVNO'.
SELTAB-KIND = 'S'.
SELTAB-SIGN = 'I'.
SELTAB-OPTION = 'EQ'.
SELTAB-LOW = INVOICE_NUM1.
SELTAB-HIGH = INVOICE_NUM2.
APPEND SELTAB.
submit ZSDRDINVPNBRPT with selection-table seltab
exporting list to memory and return.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = MTAB_REPORT_LIST
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
    CALL FUNCTION 'WRITE_LIST'
     EXPORTING
       WRITE_ONLY       = 'X'
      TABLES
        listobject       = MTAB_REPORT_LIST
     EXCEPTIONS
       EMPTY_LIST       = 1
       OTHERS           = 2.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
CALL FUNCTION 'WWW_LIST_TO_HTML'
       TABLES
            HTML   = MTAB_REPORT_HTML
       EXCEPTIONS
            OTHERS = 1.
LOOP AT MTAB_REPORT_HTML.
ENDLOOP.

For displaying output in html format,
u can either use BSP ( Business Server Pages)
or Webdynpro.
Reward if helpful.

To convert Sap Script output to PDF format and send it via email.

Hi Friends,
Could any one please tell me, how to convert the Sap Script output to PDF format and send it via email. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
John

Plese check this sample code from other thread.
REPORT zzz_jaytest .
Types Declaration
TYPES : BEGIN OF ty_pa0001,
pernr TYPE pa0001-pernr,
bukrs TYPE pa0001-bukrs,
werks TYPE pa0001-werks,
END OF ty_pa0001.
Internal Table Declaration
DATA : i_pa0001 TYPE STANDARD TABLE OF ty_pa0001, "For pa0001 Details
i_otf TYPE STANDARD TABLE OF itcoo, "For OTF data
i_content_txt TYPE soli_tab, "Content
i_content_bin TYPE solix_tab, "Content
i_objhead TYPE soli_tab,
Work Area Declaration
w_pa0001 TYPE ty_pa0001, "For pa0001 Details
w_res TYPE itcpp, "SAPscript output
"parameters
w_otf TYPE itcoo, "For OTF
w_pdf TYPE solisti1, "For PDF
w_transfer_bin TYPE sx_boolean, "Content
w_options TYPE itcpo, "SAPscript output
"interface
Variable Declaration
v_len_in TYPE so_obj_len,
v_size TYPE i.
Constants Declaration
CONSTANTS : c_x TYPE c VALUE 'X', "X
c_locl(4) TYPE c VALUE 'LOCL', "Local Printer
c_otf TYPE sx_format VALUE 'OTF', "OTF
c_pdf TYPE sx_format VALUE 'PDF', "PDF
c_printer TYPE sx_devtype VALUE 'PRINTER', "PRINTER
c_bin TYPE char10 VALUE 'BIN', "BIN
c_name TYPE string VALUE 'C:\ZZZ_JAYTEST.PDF',"Downloading
"File Name
c_form(11) TYPE c VALUE 'ZZZ_JAYTEST'. "Form Name
START-OF-SELECTION.
Selecting the records from pa0001
SELECT pernr bukrs werks FROM pa0001
INTO TABLE i_pa0001 UP TO 10 ROWS.
Setting the options
w_options-tdcopies = 1 ."Number of copies
w_options-tdnoprev = c_x."No print preview
w_options-tdgetotf = c_x."Return of OTF table
w_options-tddest = c_locl."Spool: Output device
Opening the form
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = c_form
device = c_printer
language = sy-langu
OPTIONS = w_options
IMPORTING
RESULT = w_res.
LOOP AT i_pa0001 INTO w_pa0001.
Writting into the form
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'MAIN'
window = 'MAIN'.
ENDLOOP.
Closing the form
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = w_res
TABLES
otfdata = i_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Converting OTF data to single line
LOOP AT i_otf INTO w_otf.
CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
INTO w_pdf.
APPEND w_pdf TO i_content_txt.
ENDLOOP.
Converting to PDF Format
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = c_otf
format_dst = c_pdf
devtype = c_printer
CHANGING
transfer_bin = w_transfer_bin
content_txt = i_content_txt
content_bin = i_content_bin
objhead = i_objhead
len = v_len_in
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
v_size = v_len_in.
Downloading the PDF File
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_size
filename = c_name
filetype = c_bin
TABLES
data_tab = i_content_bin.
The extension is put the it_mailpack-obj_name parameter of 'SO_NEW_DOCUMENT_ATT_SEND_API1'.

Dispalying SAP script output in landscape format

Hello All,
Could anyone please tell me the step by step process to display a SAP Script output in landscape format?
Also is it possible to display a column name in 2 lines if it does not fit into 1 line.
Regards
Indrajit.

Hi,
Here is the way to print the SAPSCRIPT in landscape ..
Goto SE71, then give you layout name then press change, then press the Header button(CAP ICON), then you will get the Header infomation, then select the Basic Settings pushbutton, then there we have an option to Print the Layout in Portrait format or Landscapr format, then select the LANDSCAPR format Radio button then activate it
Regards
Sudheer

Download SAP Script as MS word format

Can we download SAP Script in MS word format? If so Please suggest me the way.

I'm not very sure on how it can be achieved, but this can help you.
Spool to word -> http://sap4.com/codigofuente/102/396.html

Output Format for Amount in SAP Script PO

Hi,
In my Standard SAP Script PO Form 'MEDRUCK', all amount values are getting printed in the form 1.234.567,89 but I want them to be in the Form 1,234,567.89 .
For doing this I have gone in T-Code SU3 and set the default decimal notation as
X 1,234,567.89 .
I have also tried by giving the command
/: SET COUNTRY 'IN'
But still the amounts in the ouput format is coming in the same way 1.234.567,89 .
If anyone has faced similar situation, plz tell how to change the output format of amount in SAP Script.
Thanks and Regards,
Nitin Gupta

I have tried using SU3 but it's not worknig. Is their any other method also of which maybe I am not aware of?

Regarding Paragraph format in SAP Script

Hi SAP Gurus,
Can any one please tell me the use of TABS in paragraph formats in SAP Script.
Thanks & Regards,
Pavan Bandaru.

Hi
first you define you tab in paragraph formats.
whene you must use this pharagraps you
just insert double comma before the text.
,,&matnr&
attention because if you define more than a tabulator il will take the tabulator in sequence.
,,(1st tab)&matnr&,,(2nd tab)&matnr&
if i define a tabulator of 2cm and another of 3cm and you insert 4 comma
,,,,&matnr&
it will take the summ of the two tabulator.

New Page Format implentation in Sap Scripts and Reports

Hi,
   I want to print Report details and also some of the SAP Script details on the paper size of 350MM width and 310MM Height in the PORTRAIT format.
   So i created new page format with these dimensions.
   How i can use this for reports. So i can set these parameters while taking output from Report.
   Pls specify if any configuration required for this.
Thanks in Advance,
Regards,
Pavan.

In SAPscript, you set the Page Format for the document in the "Page Format" field of the "Basic Settings" page of the documents "Header" information. The popup list of this field will show all available formats in your system, so this is a ggod way to make sure your new format is set up properly.
For reports, page format is set either with the LINE-SIZE addition to the REPORT and NEW-PAGE commands, or through the PARAMETERS addition to the NEW-PAGE command. When you use LINE-SIZE the print system picks the format for you, based on the available formats in the systems.
I don't remember if there is an activation step for Page Formats, or if saving is all you have to do.

Format SAP Script / AIF - DINA vs LETTER

Similar Messages

Maybe you are looking for