Format that does not permit data modification?

When I try to change date/time of some images, I get this message.
+"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.

kfuse wrote:
When I try to change date/time of some images, I get this message.
+"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.
hi, kfuse
unless I'm mistaken you cannot edit the exif data created from the camera like date and time. you might want to do a search about this subject in our forum, there was a big brouhaha regarding this about a couple of years ago regarding a court case and exif date/time data.
victor

Similar Messages

  • Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

    I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
    Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

    Can you post an ipconfig /all from the server and the DC?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Trivia game that does NOT require data

    looking for a trivia game that does not require an Internet connection. We are going camping and like to play a trivia game around the camp fire, but there is no cell service or data or wifi. We have used Mr Trivia for the last couple years but have ran out of new questions. Looking for something simular in function. Most of what I've tryed does not funtion without running data.
    ipad, iphone or pod (mutiple generations)
    thanks

    dalewren wrote:
    Are there any carriers that allow this?
    Not that I'm aware of. In fact, many carriers, if they detect an iPhone on their network without a data plan, will either bill you for such or cancel your service.

  • Not able to adjust date and time - format does not permit

    Hello,
    I just scanned one old photo as a JPG and then imported it to Aperture 2, I renamed the file 1976-07-01_01.jpg based on the date the pic was taken. Then I tried to adjust the date and time in Aperture but got this error window:
    "Unable to adjust master file
    Aperture was not able to adjust the date and time of the master file "pic.jpg" because it has a format that does not permit date modification."
    What next?

    I am having a similar problem. The time is off by 12 hours exactly (ahead). When I touch date and time, screen goes black for less than a second and then reverts to main screen with all of the icons. I have first generation touch and just noticed this problem. All of the software is up to date. Any one know of a fix for this?

  • Need Help Choosing A Basic Phone That Does Not Require A Data Plan

    Hello,  I need to replace my current basic phone and do not qualify for an upgrade yet.
    I need to find a new or used phone that does not require data. Can someone please give me some models that will work that are newer?
    The VZW prepaid models have to be used 6 months on prepaid before you can use them on a contract and I have a contract.

    Usually on eBay, the listing will indicate if it's prepaid.
    I agree with Droid Usrr that the Intensity 2 is worth checking into, because it has a great rubberized keyboard and you can get one new for less than $100.
    Depending on what you're willing to spend, I also noticed that the Wal-Mart in my area is selling the brand new Intensity III off contract for $175. That way, you'd still have the year warranty on it, and it's a solid phone.
    There usually are quite a few inexpensive feature phones on Craigslist, too, if you're not opposed to meeting with strangers. It's best to meet at a Verizon store and activate it before handing over your money.

  • Hi, I got a virus that does not let me use Safari. I downloaded an av from the app.store but it did not detect anything. I am thinking in formatting the HD. How can I do it and will I lose?

    Hi, I got a virus that does not let me use Safari. I downloaded an av from the app.store but it did not detect anything. I am thinking in formatting the HD. How can I do it and will I lose?

    1. Force Quit .
        Press command + option + esc keys together at the same time. Wait.
        When Force Quit window appears, select the Safari if not already.
        Press Force Quit button at the bottom of the window.   Wait.
        Safari will quit.
        Relaunch Safari holding the shift key down.
    2. Safari > Preferences > Extensions
        Turn those off and try Safari.
    3. Safari > Preferences > Privacy > Cookies and other website data:
        Press “Remove all website data” button.
    4. If adware is installed without your knowledge,
        download  free  AdwareMedic by clicking “Download ” from here
        http://www.adwaremedic.com
       Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
       Once done scanning and removing the adware, quit the app by clicking AdMedic in the menubar
        and selecting “Quit AdwareMedic”.

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • How can I create a template that does not have automatic formatting but my own?

    I have just switch to a Mac from a PC and am having a terrible time with pages.  All I want to do is create my own template that has NO AUTOMATIC FORMATTING so I can do my own.
    There is nothing in the HELP sections on how to delete the automatic formatting.  I do not want to use any of their Outline Templates just make up my own.
    I would be so so grateful if someone could help me with this.  I took a one-on-one and his idea of how to get rid of formatting in my own template DID NOT WORK!
    Thanks, Deborah

    Deborah
    Hard to see your problem, and if there is something THAT DOES NOT WORK! it would obviously be useful to know WHAT that is and WHY you believe it does not work, so we can ACTUALLY RECOMMEND A SOLUTION.
    Just select any text and change it to whatever you want using the toolbar and/or the Text inspector.
    The Outlines are just a view of your text, in a form that lets you easily organise and move it around.
    Menu > View > Show Styles Drawer
    Reveals whatever style has been applied to a heading or text and you can update or create new styles by clicking on the small triangle next to it > Redefine style from selection
    When you are finished just save it as a Template.
    Peter

  • Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

    We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
    This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

    Hi Kyle A Wilt,
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
    Thank you for your understanding and support.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Clean up old SID values from an InfoObject that does NOT have master data

    I have a characteristic infoobject that does NOT have Master Data but it has a SID table. I assume that it is used primarily for the F4 value help. Now we have changed some of our data for this infoobject in R3 so that some of the values in the SID table will never be used again. My problem is that these values are still displayed in the F4 value help. And because the old values are very similar to the new values some users mistakenly pick the old value and then the query results come back empty.
    FYI - The datasource that uses this infoobject as an attribute is extracted from R3 in a Full load each night. So there is no risk that the old values in the SID table will be needed in any Master Data/Cubes/DSOs/etc.
    Is there a way to delete the unwanted SIDs from this table /BIC/SXCSAOFREG? Or is there some way to make sure that the unwanted SIDs to not show up in the F4 value help?
    Thanks,
    Dave

    Hi David,
    Goto SE14 trans --> ENter the table name as  /BIC/SXCSAOFREG. Select the "Edit" radio button. Then Select "Delete Data" radion button & click on "Activate & adjust database". But be very careful NOT to click on Delete Database table(This will delete the physical database table!!!
    Regards,
    Pavan

  • 0SD_C03 cube contains data that does not exist  in PSA

    Hi,
    We have a problem with data difference in cube and PSA. Firstly we deleted PSA extactly then extracted data from r3 to PSA. PSA has 2 records now. Then we extracted data to cube (0SD_C03) via DTP (using 2LIS_13_VDITM transformation rules). However, the cube contains approximately 300 000 data. Cube contains many records that does not exist in PSA.
    Where these data come from?
    thanks in advance,

    Hi,
    In your PSA overview, did you change the date that limits the PSA packages showing?
    (middle top of screen) and click refresh?
    it might be that you only have deleted the PSA from a certain date onwards.
    Success,
    Udo

  • Problem with offset value: field type p does not permit subfield access

    Hi experts,
    In my table am having one field ,
    Filed name : planfinish
    data type : dec    Length : 15
    data store in this field is :    12.05.2010 03:59:00 this format.
    i want to remove year 2010 from this above data by using offset.
    i have try with code :   lv_year = lv_planfininsh+6(4).      n also declare lv_year as dec 15.
    still am getting error. field type p does not permit subfield access
    kindly suggest on this.
    thx in advance.

    a packed decimal field (P) is a numeric field that is always 8 bytes long.  The (15) is the DISPLAY or max number of digits characteristic.  Like all true numeric types (not 'N'), offset is meaningless and you do NOT have format 12.05.2010 03:59:00  in a P field!  You have 15 digits and a sign, and any decimal point is implied by your data declaration.
    Look at keyword CONVERT if this is a timestamp field.

  • USMT Copies Data but does not restore data.

    Can someone help me to shed some lite on a problem we are having?  I am running an OSD task in SCCM2012R2.  The Task Has the USMT option selected and enabled.  When I run the OSD task on workstation I can see it run, I can even go to the directory
    and see the data being backed up.
    Now here is the problem, It won't restore.  I can log back into the workstation (after OSD) using the exact same ID and none of the previous data  is there:
    No wallpaper, Bookmarks, Music, Documents, etc.  
    Ideas?

    If there is no loadstate log file, it means that the action didn't even start. Are there specific things configured on the options tab of that step. Also, did the task sequence finish completely?
    One last thing, make sure that your format step does NOT format your hard disk (so look at the options tab to see when it performs the actions of the step). Hard-links are stored locally so re-formatting your hard disk will cause a lose of your data.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • JDev 11.2.1 Commit button does not save data

    I am using JDeveloper 11.1.2. I am having trouble saving updates to the database. I am trying to create an application that displays database records in a form, allows the user to modify data in the form and them saves that data to the database. I have successfully created the database, entity objects, view objects and application module. I created the form on the page by dragging the data control on to the page. I used the same method to create a table from the same data control. I included a submit button on the form. I dragged the create, delete and commit buttons onto the form. This application gets the data from the database, the user modifies it, select the submit button. This displays the change in the table. I can do the same with create and delete. However, I use the commit button to write the data to the database but it never happens. I have set up logging with –Djbo.debugoutput=console. I can see that the delete button {#bindings.Commit1.execute} is doing something but no change is made to the database.
    Thanks for your help, Steve

    I have had some success. I tested with the BC browser in my application and got the same results, no update. So I created a new application. I used the 'Create Business Components from Tables' option to create a set of Entity objects, Entity View objects, and Query View objects. The interesting thing I found was that when running the BC browser and trying to update the database using an Entity View object I had success. Was able to add and modify records and results saved in db. However, when I use the browser and try to do the same thing using a Query View object I get the behavior I've been seeing all along, it looks like it is working but not data saved to the database. In order to make the Query View object updatable in the browser I had to make all of its attributes updatable 'Always'. this made the view look updatable in the browser but no save. In my real application I did not have any Entity View objects. the Query View objects look the same so I didn't create any Entity View objects. So I want back to my real application, removed all Entity objects and Query View objects, recreated them with the 'Create Business Components from Tables' option. I created Entity View objects this time. When I drat a data control based on an Entity View onto my page I can make updates and the commit works.
    I'd like to understand the difference between the Entity View objects and the Query View objects. Once they have been created I have a hard time telling them apart. The Entity View object for the Employee looks very much like the Query View object for Employee. There are some flags set differently and the Entity View object 'Entity Objects' tab shows the Employee table selected. I can tweek the Query View to look like the Entity View but it still does not behave the same, the commit does not save data.
    Thanks for all the help, Steve

  • Report does not display data

    I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated.  The problem is that the pages show up as blank.  If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen.  This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated.  By the way if this user logs in remotely and runs this report it will display data.

    A few ideas;
    1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
    You are on SP 2...
    [SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
    2) Try different resolutions
    3) Try to see if there is an updated video driver
    4) Make sure there is a default printer driver installed.
    5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
    Ludek
    Edited by: Ludek Uher on Feb 22, 2010 10:32 AM

Maybe you are looking for