Formating issue in report 10g between report developer and application

I need help, I hope my description will be explicit enough for someone out there to understand. I have a comment field in report developer, the user wants it to be right justified and the length to be 200 xters, the comment is derived from a function. In report developer the comment is coming out okay, but when I put it in the application the comment is exceeding the data field. I put a filll color in the comment and it comes out like below in the application.
example
The most significant achievement is to render help to those* who seek.
In application, my filled is covered up to those, whereas in report developer, my filled covered all the comment line.
The comment field is variable vertically and fixed horizontally, and enclosed by vertically variable repeating frame.
This is an issue because part of the comments is chopping off when user run and print this report.
Thank you.

Try by setting view properties like Table or Pivot table if this is not working then attach the report to a page and set the section properties and see how it works.
If this is not working then Notes might have trimming it ;)
If helps pls mark

Similar Messages

Font/Formatting issues with Reports/Forms

Hello,
Can you please allow us to specify the formatting attributes in Portal Reports and Forms ? In Portal reports, for e.g, it would be great if we had one set of formatting for the report header and another for the report data. Same way, for forms, we would like to format the labels in forms and different formatting for the rest of the form.

One thing you might do is this. Don't display the Title View in your reports. You can do this either by deleting the views from the Compound Layout or, within Edit Dashboard, by selecting only the view that contains the report. (Obviously, if your report has several view, you would need to choose the first route.)
Instead of the Title View, do this: In the Dashboard section which contains both reports, click on the "Rename" button. Type the name of that best illustrates both reports, check the "Display Section Heading" checkbox and click "OK."
Next, click the "Rename" button again and this time go in to the formatting section to format as required. (Note: After you check the checkbox, if you don't click "OK" right after, the check mark won't stick. So click "OK" and then go back in to do any formatting you wish.)
This method allows the user to collapse the section and still see what the section is about. This is good practice when you have several reports in one dashboard page. Even collapsing all the sections, you can see what is "inside" and expand the appropriate section.
HTH,

What is the difference between personnel development and performance management

Hi,
What is the difference between personnel development and performance management in terms of configuration and in portal level .
Thanks
Srikant

HI Srikant,
Personnel development is PD module where u can configure the qualification catalog with the proficiency which can be attached to the position or job as a requirement and the same can be attached to the person as a qualification and then you can do the profile matchup and find any qualification deficit and can propose any trraining required to impart the qualification.And also you can do succession planing, career planing and also development plan.
Performance management is an appraisal cycle in a company . All appraisal process between manager and the employee will be taken care via portal with the appraisal template.(form)
hope this will help you.
regards,
DInesh

Correlation between BI developer and Web Analyst?

These days, I'm studying to become a business intelligence developer and today I'm reflecting If I need necessary knowledge as a web analyst.
My question is.
Is there a correlation between BI developer and web analyst If yes, should I also gain skills as a web analyst?

Hi Sakura,
The largest part of any analyst role is understanding the clients needs / business requirements and being able to help translate those requirements into functional specifications. The best analysts I have worked with are the ones that know the product
and what it can do. In addition, we will see more business intelligence applications deliver or render results to the web enabled portals like SharePoint 2013.
As a developer the more you understand a clients needs and are able to meet those needs either OOB, third party, or custom code the more valuable you will become in being able to know where the holes are and being able to fill them,
-Ivan
-Ivan

SSRS 2012 ERROR [IM014] [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application

I have a SSRS installation, I have deployed my connections to, but they fail with title message. The drivers and ODBC on the box are setup and work fine with 32 bit ODBC conn manager.
When I run or configure my connections on the site, via the browser, I get errors connecting.
I tried to find which app pool http://server/ReportServer application used, but I am not finding that, so my first ?
How do I find in IIS what app pool SSRS application is using?
I have 2008 server, running SQL 2012 V.S. 2010 and I think I need to enable my app pool to use 32 bit, but cannot figure out which one it uses? I see default set to 32 bit = true, which I thought would be it.
Can I set my SSRS project to use x86, platform? Like I did with SSIS?
If so, how? SSRS and SQL 2012 somewhat new for me. Thanks
Developer MS Reporting Services

Hi DCady,
To manage a data source that connects to a 32-bit driver under 64-bit platform, we use C:\Windows\SysWOW64\odbcad32.exe. To manage a data source that connects to a 64-bit driver, we use C:\Windows\System32\odbcad32.exe.
Generally, if we use the 64-bit odbcad32.exe (C:\Windows\System32\odbcad32.exe) to configure or remove a DSN that connects to a 32-bit driver, for example, Driver do Microsoft Access (*.mdb), we will receive the following error message:
The specified DSN contains an architecture mismatch between the Driver and Application
To resolve this error, we need to use the 32-bit odbcad32.exe (C:\Windows\SysWOW64\odbacad32.exe) to configure or remove the DSN.
Besides, please make sure there are no DSN using the same name in both 64-bit and 32-bit ODBC Data Source Administrator.
Reference:
Managing Data Sources
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Architecture mismatch between ODBC driver and application

Hi,
I have Windows 2008 server R2 OS which is 64 bit OS. I have created an SQL Server ODBC connections for my CMC database. I am trying to install Crystal Reports Server 2008 V1 SP3 but I am getting this "architecture mismatch between ODBC driver and application" error while choosing the ODBC datasource for CMS.
I thought CRS 2008 version would easly be installed on Windows 2008 server as it mentioned on the installation guide.
How do I resolve this issue?

Moved to BOE Admin forum.
CRS 2008 is a 32 bit app so all attachments, Printers, DB clients, etc. must all be 32 bit or support 32 bit applications.
Use the 32 ODBC administrator in \windows\syswow64 folder.
Thank you
Don

Difference between Business message and application message

Hi B2B Gurus,
Can you please explain the difference between Business message and application message?
Regards,
Praveen

Hi Praveen,
Business message status reports identify business message instance details for a document protocol. These details include the sending and receiving trading partners, the agreement name, the business action, the business message ID, the status, the exchange protocol and document protocol, and message details.
Application Message Reports provide information related to the SOA Composite—the name, version, and so on, if a back-end composite application sent or received the message.
Regards,
Anuj

Confussing between Database User and Application User in Discoverer

Hi All,
I am new to Discoverer.
Please let me know the difference between Database User and Application User in Discoverer Administrator as well as in Discoverer Desktop Editions.
1) While I am trying to connect to Discoverer Desktop, I am unable to connect to it with Apps Database User.
2) Where the Discoverer compenent will be installed and what the configuration settings need to done work on it.
Please let me know the answers soon.
Thanks in Advance.

Hello
I think a database user should pretty much be self explanatory - this is a user account that exists in the database. This account is created by your Database Administrator (DBA).
The second kind of user that Discoverer understands is a user that exists inside Oracle E-Business Suite (EBS), formerly known as Oracle Applications, hence an application user. This user account gets created by the EBS system administrator.
Now, just because you're using EBS, it does not automatically follow that users will be application users. Let me explain.
Discoverer can be installed in one of two modes, standard mode and Applications mode.
The vast majority of organizations use standard mode which means they allow database users to access the system.
The only time that you will need an applications account is under the following two rules:
1. Your organization is using E-Business Suite, AND
2. Your Discoverer administrator has installed Discoverer in Applications mode.
Applicatons mode does not happen automatically, even if you have EBS, and you cannot install that mode by accident. You have to tell Discoverer that it is operating in that mode, provide some additional EBS account information, make security assignments and set users have to deliberately tell Discoverer they want to connect using an applications account.
May I suggest you get hold of a copy of the Oracle Discoverer 10g Handbook that I wrote. That book explains in detail the differences between the modes. I also have a free white paper on my website that describes how to install Discoverer into Applications mode.
I hope this helps
Best wishes
Michael
http://ascbi.com

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
<b>System Events (Default)</b>
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
<b>Application Events</b>
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

Communication between a driver and application.

Communication between a driver and application.
I am writing a driver for a PCI card. I have found very good examples of how the driver should be build.
Where do I find the information about how the user mode application should be talking the driver.
So If you have any idea that will help me, please let me know.

Hi,Sir
This for your reference.
It will create pci adapter device node at /devices .
You can use AP function call ioctl to Communicate with your device driver.
static int
xxattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
int instance = ddi_get_instance(dip);
switch (cmd) {
case DDI_ATTACH:
allocate a state structure and initialize it.
map the device�s registers.
add the device driver�s interrupt handler(s).
initialize any mutexes and condition variables.
create power manageable components.
* Create the device�s minor node. Note that the node_type
* argument is set to DDI_NT_TAPE.
if (ddi_create_minor_node(dip, "minor_name", S_IFCHR,
instance, DDI_NT_TAPE, 0) == DDI_FAILURE) {
free resources allocated so far.
/* Remove any previously allocated minor nodes */
ddi_remove_minor_node(dip, NULL);
return (DDI_FAILURE);
* Create driver properties like "Size." Use "Size"
* instead of "size" to ensure the property works
* for large bytecounts.
xsp->Size = size of device in bytes;
maj_number = ddi_driver_major(dip);
if (ddi_prop_update_int64(makedevice(maj_number, instance),
dip, "Size", xsp->Size) != DDI_PROP_SUCCESS) {
cmn_err(CE_CONT, "%s: cannot create Size property\n",
ddi_get_name(dip));
free resources allocated so far
return (DDI_FAILURE);

Difference between component configuration and application configuration in webdynpro

what is the difference between component configuration and application configuration in webdynpro?

Hi Rohit,
With the component configuration, you can control the behavior of each individual component within a Web Dynpro application or the user interface of individual views. For each component, several records of configuration data can be created.
Using the application configuration, it is now possible to assign the configuration required in the current application to all the components used.
In short : Component Config belongs to WDP Component and Appl'n Config. belongs to WDP Appl'n.
Check this document for more information.
Web Dynpro for ABAP - Component and Application Configuration
Thanks
KH

Difference Between central instance And application instance

Hi every body can any one tell me that
what is the difference between Central instance and Application instance.
If i am using 4.7 ee with orcale data base.

Check these links
http://oreilly.com/catalog/sapadm/chapter/ch01.html
Basically these terms comes when you are working on live servers where all the users log into to do their daily work.
We says when we want to distribute the workload on servers we requires central instance and application servers.
Normally it is not known to common users where they are logging into...but they can login directly usign the specific Instance details of servers.
Please see this also
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a64e8505211d189550000e829fbbd/frameset.htm

Difference between web server and application server

Hi Everybody
Could anybody expain difference between web server and application server?
Sharad

Hi there
The difference I know is the application servers provides the containers for the applications to run which is not provided by the web servers.
For example the containers can be an EJB container or JSP container etc

Difference between system log and application

Hi,
I would like to know the difference between system log and application log.
Also when to use which log ?
Regards,
Jey

hi ,
Refaer the given below link
[LOGS|Re: Who uses Application Logs?;
Hopes this helps
Regards
Ritesh Jha

Difference between Information Field and Application Field

Hi,
Can anyone tell me the difference between information field and application field in ucm?
Thanks

Information fields are metadata fields that describe the content - by default they will appear on the interface and be searchable etc.
Application fields are a special sort of meta field normally used behind the scenes to help with the logic of forms/templates. Application fields do not normally appear on the interface and are not searchable.
More simply put if you just want to add content metadata just use Information Fields
Tim
Edited by: Tim Snell on 16-Sep-2010 06:51

Formating issue in report 10g between report developer and application

Similar Messages

Maybe you are looking for