Formating Reports ooutput in Reoprt Layout Option 4

Hi,
I want to wrap contect of report column and not able to achieve by any method mentioned on this forum in past.
I am using under Layout and Pagination>Report Template>default look 4
and version of HTML DB is 2.0
Please help

Hi APEXDeveloper,
Can you write your name in your profile and message please.
Solution to your problem can be achieved by going thru following steps:
Click on Report and go to report attributes.
Now Edit the column whose column width you want to control.
In Column Formatting section, in CSS Style type "width:100px"
You can vary the number as you like.
Regards
Rana

Similar Messages

Standard Report not Displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

hi ,
it depends on the user parameters.
U have to identify the parameter id and u have to activate it in user maintainance partameters .
su01 -> parameters.
ex . parameter id -> SD_VARIANT_MAINTAIN -> X
so u can save layout now.
regards,
manikandan

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

Not Able to run Report 10g through Web Layout Option

I have installed Oracle Developer 10g on my Laptop, I am able to run form, Report(In paper layout) successfully but when I try to run Report in Web Layout Mode, I am getting following error, Is there any setting is missing, could you provide some hint that would help me in resolving my issue.
Thanks
Kamlesh
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Errors compiling:C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\3000\default\defaultWebApp\persistence\_pages\\_MODULE1001201432.java
javac: invalid flag: Files\Java\j2re1.4.2_01\lib\ext\QTJava.zip;;C:\Dev10g\j2ee\home\lib/ejb.jar;C:\Dev10g\j2ee\home\lib/servlet.jar;C:\Dev10g\j2ee\home\lib/ojsp.jar;C:\Dev10g\j2ee\home\lib/jndi.jar;C:\Dev10g\j2ee\home\lib/jdbc.jar;C:\Dev10g\j2ee\home\iiop.jar;C:\Dev10g\j2ee\home\iiop_gen_bin.jar;C:\Dev10g\j2ee\home\lib/jms.jar;C:\Dev10g\j2ee\home\lib/jta.jar;C:\Dev10g\j2ee\home\lib/jmxri.jar;C:\Dev10g\j2ee\home\lib/javax77.jar;C:\Dev10g\j2ee\home\lib/javax88.jar;C:\Dev10g\j2ee\home\../../opmn/lib/ons.jar;C:\Dev10g\j2ee\home\../../opmn/lib/optic.jar;C:\Dev10g\j2ee\home\../../lib/dms.jar;C:\Dev10g\j2ee\home\../../dms/lib/dms.jar;C:\Dev10g\j2ee\home\../../diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\../../dms/diagnostics/lib/ojdl.jar;C:\Dev10g\j2ee\home\lib/connector.jar;C:\Dev10g\j2ee\home\lib/bcel.jar;C:\Dev10g\j2ee\home\lib/cos.jar;C:\Dev10g\j2ee\home\lib/jsse.jar;C:\Dev10g\j2ee\home\../../oracle/lib/jsse.jar;C:\Dev10g\j2ee\home\lib/jnet.jar;C:\Dev10g\j2ee\home\lib/jcert.jar;C:\Dev10g\j2ee\home\lib/activation.jar;C:\Dev10g\j2ee\home\lib/mail.jar;C:\Dev10g\j2ee\home\../../javavm/lib/jasper.zip;C:\Dev10g\j2ee\home\../../lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../oracle/lib/xmlparserv2.jar;C:\Dev10g\j2ee\home\../../jlib/orai18n.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/orai18n.jar;C:\Dev10g\j2ee\home\lib/jaxp.jar;C:\Dev10g\j2ee\home\lib/jaas.jar;C:\Dev10g\j2ee\home\jazn.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/classes12dms.jar;C:\Dev10g\j2ee\home\../../jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\../../oracle/jdbc/lib/nls_charset12.jar;C:\Dev10g\j2ee\home\jaxb-rt-1.0-ea.jar;C:\Dev10g\j2ee\home\../../soap/lib/soap.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsserver.jar;C:\Dev10g\j2ee\home\../../webservices/lib/wsdl.jar;C:\Dev10g\j2ee\home\../../rdbms/jlib/aqapi.jar;C:\Dev10g\j2ee\home\lib/jem.jar;C:\Dev10g\j2ee\home\../../javacache/lib/cache.jar;C:\Dev10g\j2ee\home\lib/http_client.jar;C:\Dev10g\j2ee\home\../../jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/jssl-1_1.jar;C:\Dev10g\j2ee\home\../../jlib/repository.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/repository.jar;C:\Dev10g\j2ee\home\lib/jaasmodules.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/runtime12ee.jar;C:\Dev10g\j2ee\home\../../sqlj/lib/translator.jar;C:\Dev10g\j2ee\home\lib/crimson.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcs.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcp.jar;C:\Dev10g\j2ee\home\../../jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpse.jar;C:\Dev10g\j2ee\home\../../jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpsmime.jar;C:\Dev10g\j2ee\home\../../jlib/ojpcms.jar;C:\Dev10g\j2ee\home\../../oracle/jlib/ojpcms.jar;;;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\classes;C:\Documents and Settings\kamlesh\Local Settings\Temp\docroot\WEB-INF\lib\reports_tld.jar;.
Usage: javac
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are used
-classpath Specify where to find user class files
-sourcepath Specify where to find input source files
-bootclasspath Override location of bootstrap class files
-extdirs Override location of installed extensions
-d Specify where to place generated class files
-encoding Specify character encoding used by source files
-source Provide source compatibility with specified release
-target Generate class files for specific VM version
-help Print a synopsis of standard options

Hello,
The problem seems to be a space in the Classpath :
javac: invalid flag: Files\Java\j2re1.4.2_01
Files\Java\j2re1.4.2_01 seems to be the end of c:\Program Files\Java\j2re1.4.2_01 ..
Check REPORTS_CLASSPATH
regards

LAYOUT option in classical report

HI all,
Is it possible to provide SORT options, LAYOUT options (CHANGE layout, SAVE layout) in classical report as similar to those options in ALV? If so, how to display those icons at the top of the report as similar to ALV?
Regards,
Shanthi

Hi Shanthi
It can be done but will take more time.
For example.
just check this.
data: tcode(10) type c.
START-OF-SELECTION.
FORMAT COLOR COL_HEADING.
ULINE.
WRITE:/ '***********************The following are the transaction'.
WRITE:'codes in BPS ************************'.
FORMAT COLOR COL_HEADING OFF.
ULINE.
SKIP .
FORMAT COLOR COL_HEADING.
ULINE.
WRITE:/ 'Please select the report/program by double clicking on the'.
WRITE:'line'.
ULINE.
FORMAT COLOR COL_HEADING OFF.
SKIP.
FORMAT COLOR COL_POSITIVE.
ULINE.
tcode = 'ZCUS1'.
WRITE:/ '1.Version Utility program - ZCUS1 .', 75 tcode.
HIDE tcode.
ULINE.

IN ALV Report 'SAVE LAYOUT' option missing

Dear All,
I have created one report in ALV GRID using ABAP OBJECTS(Using class CL_GUI_CUSTOM_CONTAINER and
CL_GUI_ALV_GRID).But in output when i click on change layout option i am not getting SAVE layout option.
I have already passed I_SAVE parameter = 'A' while calling metod SET_TABLE_FOR_FIRST_DISPLAY. But i didnt worked.
Please do needful.
Regards,
Mayank

Hi,
You can manage display variants by using parameters, is_variant and i_save of set_table_for_first_display. Here are options for variant handling. <structure_name> is the variant-defining structure of type DISVARIANT. The field report in this structure should contain the value of sy-repid.
Hope this helps. Reward points if helpful.
Thanks,
Balaji

SAVE Layout Option in ALV list Report

Hi Experts,
Is it possible to SAVE the layout option for Block ALV list Reports?
Thanks in Advance,
Sivak.

Hi,
It is not possible to save layout in BLock ALV display but possible to change layout. There is no parameter to save. It is not possible to store the layout as it has several structure.
Thanks & Regards
Rocky

Standard Report's Layout not displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

HI,
No yaar, This one is standard report and i am getting 'SAVE LAYOUT' option in 300 but not in Production Server.There must be settings for this. If u hv any idea ?
Regards,
Mayank

"Select Layout" Option for ALV Report

Hi All,
I have developed a ALV report.
In the output, on clicking the "Select Layout" button, a small window opens with some layout option/variant say "ZSLEB".
When i choose this layout, the output changes and takes the form of the chosen layout i.e. ZSLEB.
Now, on refresh, the alv output doesnt display this new layout, but goes back to the default layout/variant.
Actually, i am not passing anythin to the IS_Variant parameter in the ALV_GRID_Display FM.
I suppose i need to somehow manage to fetch the "ZSLEB" layout value during refresh and pass it to Is_Variant. Please help me in doing this.
Thanks & Regards,
Tejas Savla

Hi
On refresh ,
                   Call ths below code.
s_variant-report = sy-repid.( Your report name ).
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
    is_variant                 = s_variant
I_TABNAME_HEADER           =
I_TABNAME_ITEM             =
IT_DEFAULT_FIELDCAT        =
I_SAVE                     = ' '
I_DISPLAY_VIA_GRID         = ' '
   IMPORTING
E_EXIT                     =
    es_variant                 = s_variant
   EXCEPTIONS
     not_found                 = 1
     program_error             = 2
     OTHERS                    = 3
Can pass this to IS_VARIANT while calling for REUSE_ALV_ DISPLAY
Please reward if useful.

Report (Word type) text wrap options

Hi all:
I am using the Report Generation Toolkit in LabVIEW 8.5 and creating a report in MS Word. I have the report looking good, but it is really more of a starting point for the user, so I want to make their use of the file in MS Word easier by making a change that I have not been able to make. I include some graphs using the "Append Control Image" VI, but they are set to "Inline with Text" style text wrapping (a Layout option in MS Word). I would like them to be "Square" text wrapping. I have not been able to find anything in the RGT or any ActiveX property that even addresses this feature. Does anybody know how to do this in LabVIEW?
bj

Hi BJ,
I've looked through the VIs for Report Generation and I think your best option may be to set up a template for your report. With a template, you can have all of the formatting taken care of beforehand and then simply insert whatever elements you want from LabVIEW. Hope this helps!
Stephen Meserve
National Instruments

How can we create save layout option in grid tool bar

hi,
how can we create select layout option in grid tool bar to save my own layout. if any one knows tell me immediately
thanks

Hi again,
1. We need to do 1 additional thing.
data : GS_variant TYPE DISVARIANT.
GS_variant-REPORT = sy-repid.
2. while calling pass this parameter also.
IS_VARIANT = GS_variant
It will work now.
3. Moreover, I_SAVE has 3 options.
I_SAVE = SPACE
Layouts cannot be saved.
I_SAVE = 'U'
Only user-defined layouts can be saved.
I_SAVE = 'X'
Only global layouts can be saved.
I_SAVE = 'A'
Both user-defined and global layouts can be saved.
regards,
amit m.
Message was edited by: Amit Mittal

HOW TO ACTIVATE SAVE LAYOUT OPTION IN VA05 T CODE

Dear Genios,
i am facing probel to activate the save layout option in any sap standard reports.
I want to create & save a layout in standard report va05.
please help me for the same.
Regards
Rabin Nayak

Go to SU01/SU3 ( to ur ID) select parameters tab and then scrol down and press F4 select SD_VARIANT_MAINTAIN and in the next field select A or X then try it will allow u to save ur own variant.(the save icon come to screen variant selection screen)
More on this:
By default, SAP user can't save report layout in some SAP SD t-code such as: VA05 and SDO1. The 'save' menu will be grey. But, you actually can save the layout by adding a parameter in your SAP user profile. You do that with t-code: SU3. Go to 'parameters' tab and add new parameter id, which is: SD_VARIANT_MAINTAIN'. The parameter value for that is 'A'. Then save your user profile and try again to save layout in VA05 or SDO1 t-code.
Regards,
Sanjeev

Layout option doesn't work in Easy Print VI panel, controls on tabs don't appear

Found two problems with the Report Generation VIs:
1) In the (Report Generation) Easy Print VI Panel or Documentation.vi, the Layout options don't work (dug down into the sub-VI's and found that they are not connected to anything).
2) If you have controls or indicators on a Tab Control, and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they don't appear. The only controls/indicators that do appear are the ones that are displayed on all of the tabs (ie, create an control and move it on top of the tab control so that it appears on every page). There is a sub-VI (Expand_control_ref_with_nested_controls.vi) that is called to handle nested controls (ie, clusters, arrays,etc...) but it should have a case to handle tab controls.
Solved!
Go to Solution.

Hey Sajosie,
Digging into the Sub-VI's you are correct in saying that the Layout Options user input is not connected to anything for most cases. However, In the default case of "Quick Print" the Layout Options are used to modify the layout of the report. In the help for this VI, it mentions that this input is ignored for "Standard Reports" and "HTML" report options. However, it does not mention that this ignoring of the Layout Options is expected for "Word" or "Excel" reports.
In terms of including controls and indicators in the report that appear on tab controls, I can make a product suggestion to make this sort of front panel design more compatible with the Easy Print VI Panel or Documentation.
Hope this helps.
-Ben
WaterlooLabs

Layout Options - Page Order Does Not Work Correctly

I have a Photosmart C7280 All-in-One printer. The Layout Option - Page Order does not work as expected. The User Guide (page 95) states that the default for a multiple page document is to print first page first. The manual states that to print last page first requires one to change the Page Order to "Back to Front". For my Excel, Word, Internet Explorer and PDF pages, I need to leave the Page Order as "Front to Back" if I want the last page to print first. This makes no sense. In addition, I can't get my Quicken reports to print last page first no matter what I try. Does anyone no why the Page Order does not work as expected for Excel, Word, IE and PDF, and does not work at all for Quicken?

Keisha,
If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
Using your query as an example, I would re-write it like this:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID)
|| APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
|| C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
Thanks,
- Scott -
http://sumnertechnologies.com/
http://spendolini.blogspot.com/

Layout Option on Selection Screen For Zreport

Hi All,
Plz explain how to do coding for using Layout option on selection screen of
report. Also i should be able to save and create new layout on selection screen.
Thnaks in advance.
Aniket Dayama

hi,
creation of sub-screens.
selection-screen begin of tabbed block <name of the tab> for < height of the tab in no's> lines.
eg;
selection-screen tab(20) l1 <data element> user-comand <name of the funcion code>
selection-screen end of block <name of the tab strip>.
eg;
selection-screen begin of tabbed block mytab for 10 lines.
selection-screen tab(20) l1 user-command tab1.
selection-screen tab (20) l2 user-command tab2..
selection-screen end of block mytab.
Under initialization.
data element = text-01.
data element = text=02.
How to initialize the tab with default screen.
<name of the tab> - prog = sy-repid.
<name of the tab>- dynnr = '<subscreen no>'.
<nane of the tab>-activetab = '<user-command for the strip>
if this has solved ur problem then dont forget to reward with points.
with regards,
madhuri.

Formating Reports ooutput in Reoprt Layout Option 4

Similar Messages

Maybe you are looking for