Formatting 2GB SD card with FAT32 using Disk Utility

Hello
I'm trying to format a 2GB SD card in a card reader/writer to FAT32 using Disk Utility. Unfortunately the only option available under the Erase button is "MS-DOS File System (FAT16)". I need to do this to upgrade the firmware in my Sony TV which requires a FAT32 formatted USB device.
Any help or suggestions would be greatly appreciated.
Thanks
Tim
P.S. Unfortunately I'm stuck in OSX Tiger on an old B&W G3 while my G5 undergoes repairs.

Tim Goodwin wrote:
Ok, well anyone know of a free OSX 3rd party utility that will enable me to format the SD card to FAT32?
Unfortunately I don't have a larger SD card.
I tried my 1GB SD card on a XP PC and I'm not given the option of FAT32. So it may be a limitation of the SD specification, which means you may just need to bite the bullet and buy a larger SD card.
Perhaps you can ask Sony if there's some setting on your device to use something other than a FAT32 SD card. (I mean, this is Sony after all, you'd think they'd prefer Memorystick. )

Similar Messages

Both my MacBook Pro Retina Display and new iMac will only format an SD as FAT16 using Disk Utility. How do I format in FAT32

I have a new iMac and MacBook Pro with Retina Display running 10.8.2
When I use Disk Utility on a San Disk 2GB SD card I can only format as FAT16. How can I format the card as FAT32?

Just posted a problem I'm having connecting my Jaybird Freedom and iPhone5 (https://discussions.apple.com/thread/4716045). The Jaybirds connected fine with an iPhone4s and another (forgotten) device so I don't think the problem lies with the Jaybird. I'd be interested if you hear differently.

Format a 3TB HD using Disk Utility with Yosemite?

Can a 2014 Macbook Pro running Yosemite format a 3TB HD intended for an external case using disk utility? I've had issues in the past with a 2010 Macbook Pro and am hoping its now not an issue.

There should be no problem. There might be a problem if the given HDD has some proprietary software installed by the manufacturer.
Ciao.

I need help with boot camp. "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

Using Disk Utility to erase SDHC card taking too long

So... I had this 32 gb memory card that neither my camera nor my computer would read (iMac running OS 10.9.5 Mavericks and the camera's a Canon Power Shot SX40HS, just in case that matters).
I decided to try erasing the card using disk utility just to see if anything would recognize it after that, since nothing else seemed to work. Now, it's says it's partitioning with an estimated time of 1 day! I suspect I did something wrong. Why is it partitioning? I just wanted it to erase the card! I don't really understand all the jargon in the disk utility, even though I've used it before. I chose the least secure erase setting so it might not be impossible to recover items.
Here's the screenshot of what it's up to- still. Am I formatting the wrong thing? I don't have anything else that's 32 gb that I know of, so I'm pretty sure it's the right item, but it's taking FOREVER! Can I stop it somehow, or would that wreck the card? I put the name as 32 GB Lexar, just to be clear what I was erasing, but maybe I've messed something up. HELP?

I'm not sure what you mean by a modern disk utility. It's what's on my machine. I have the latest version of the operating system that is available, as far as I know. I've tried to download Yosemite, but it wasn't available yet.
I just need to know how I can stop this process, as it is now showing it's up to 2 days and 14 hours! That's ridiculous.

I accidently used Disk Utility to fix a partition. I cant boot in with any USB drive. Help.

I accidentally used Disk Utility to fix a partition. It erased it. I desperately need to restore it.
I have an imac without a cdrom. How do I create a bootable usb with testdisk as for some bizarre reason it seems impossible to create a bootable usb drive for osx. I tried GParted and the ultimate boot disk that both have test disk.
I am stumped. Why can't I boot into my imac with a usb? I have a mac air that I just cant seem to create a usb drive with testdrive thats bootable. I even tried rEFit but no luck.
Anyone have an idea? How do I fix my system ?

I have an imac OSX 10.8.
I tried creating a usb drive of testdisk on my mac air so that I could use it to boot into the iMAC and restore the partition table.
I created it using:
hdiutil convert -format UDRW -o target.img ~/Desktop/ubcd530.iso
dd if=./target.img.dmg of=/dev/rdisk1 bs=1m
It did not work. It would not boot. I also tried Gnome Partition tool and that did not boot either. I need my old system as it has important data
Any tips? Thanks!

Using Disk Utility to format jump drives to work on a PC?

I have tried several times to format usb jump drives using Disk Utility and then I copy files to it and try to open it on a Windows computer and it prompts me that it needs to be formatted on the Windows computer. How do I format it on a Mac to work on a PC? I have tried this with different usb drives using the MS DOS format option.
Thanks.

Dude,
Of course this isn't a jumpdrive but for externals...
There's a bug in Apple's disk utility software when using USB. I just had this happen to me too. The work around is to use Firewire when formatting. Fortunately, I have a multi port interface so changing to Firewire wasn't an issue.

Cannot format iPod using Disk Utility

My iPod (5th Generation) has been displaying a -48 error for weeks, and i tried to follow the advice to format my iPod using Disk Utility. However, after leaving my iBook 1.2Ghz G4 on over night with Disk Utility erasing it, the little bar was still stuck on partitioning, never moving. What can i do?

try reset in iTunes. Then follow the steps in Jason Creasey's excellent procedure in the long thread ref Code -48. Good luck.

HT1553 Does using Disk Utility also backup MSOffice 2008 (Mac) software already installed on my Macbook Pro with Snow Leopard? If not, how would I do that?

Hi,
I'm looking to upgrade from Snow Leapord (10.6.8) to the new Mountain Lion. Have a lot of applications and softwares that I would like to back up when installing the new OS, such as MS Office, Adobe Photoshop and Illustrator. Any ideas on what is the best way to do that.
I'm not too tech savvy, so a simple solution would be appreciated.
Thanks,
Shyam

If your not very tech savvy, I would have someone assist you in the upgrade process as your about to inflict major change on your life and computer.
There are some things to consider before you upgrade.
1: The age of your machine:
My advice has been if your Mac is less than two years old and has a dedicated graphics (not all only Intel HD 3000 or 4000 CPU graphics like the 13" has)) then you stand a very good chance of 10.8 (or 10.7) running fine on your machine.
In either case you need to check the specifications of your machine to see if it meets Apple's requirements, and unfortunately those requirements are a bit low, resulting in a slower machine when you upgrade.
https://en.wikipedia.org/wiki/OS_X_Mountain_Lion
https://en.wikipedia.org/wiki/Mac_OS_X_Lion
(note: 10.7 is no longer being sold via the AppStore, you should upgrade to 10.8, however some machines can't, you can call Apple Sales to upgrade to 10.7)
If your machine originally came with 10.5, I would say forget it. Mac's don't last forever and laptops usually have a life of about 4 years with normal use. Desktops last longer of course and can withstand more OS X upgrades if Apple allows it.
2: The age of your software.
10.7 and 10.8 will not run PPC based software of old like 10.6 does, also upgrading to 10.8/10.7 may require expensive software upgrades that can hit you unexpected. Consult this site and your other needed software and hardware drivers/software (for printers/scanners,custom keyboards/mice etc) BEFORE you upgrade the operating system.
http://roaringapps.com/apps:table
3: Carbon Copy Cloner or SuperDuper "clone" (payware)
Your OS X boot partition to a new/reliable, blank powered external drive and use Disk Utility to Repair Permissions on both afterwards. You can hold the option key down and boot from this clone drive to use the computer like before if your OS X upgrade fails and the machine gets bricked. You can also use Disk Utility to erase the entire internal drive and reverse clone if you find out the OS X upgrade is not to your liking.
Make sure all other drives are disconnected, like TimeMachine when cloning or upgrading OS X, thus when you reboot TimeMachine doesn't self update itself, which can lock you out from going back in time to restore from.
Note: If you have Bootcamp, you can clone that with WinClone (payware) to another drive and recreate Bootcamp later and restore it.
4: Some firmware updates can possibly "BRICK" your hardware
Firmware updates progress in a forward manner and can't be downgraded, so what sometimes occurs is a software error by programmers or a hardware glitch on your machine won't 100% cooperate with the firmware update and thus your machine will fail to function. Sometimes even a interruption in the OS X upgrade or firmware update process will cause the problem. When this occurs, a trip to a Apple Repair is in order and if your machine is out of AppleCare (3 years) or the 1 years standard warranty your looking at a very expensive logicboard replacement. At this time you usually consider the cost not worth it and rather spend the money on the newer machine, especially if it's 2-3 years old. This can come as quite a shock as you expected to pay $20 for a OS X upgrade and now have to buy a whole new machine.
You can't not upgrade the operating system for security and bug fixes, however you make sure you have AppleCare that will protect you for three years if such a hardware bricking occurs. If you don't have AppleCare you might want to reconsider taking the chance upgrading the operating system and thus the firmware.
AppleCare can be purchased within one year of the original machine purchase, it gives one 3 years of care from the date of machine purchase, not from the date of AppleCare purchase.
5: Market share of OS x versions (apx)
10.4 4.5% security updates > no
10.5 15% security updates > no
10.6 52% security updates > yes
10.7 30% security updates > yes
10.8 2 million upgraded so far, just released
6: Your decision to upgrade or not
It depends upon your computer technical ability, the age of your machine, your software investment and your budget.
Can you afford to pay for professional assistance if your upgrade doesn't go as expected? Are you in AppleCare?
Can you afford to pay for upgrades to third party software?
Can you afford the downtime while your machine is being repaired?
Can you live without the "new features" newer OS versions provide?
Does your hardware even support the newer features?
You might decide the upgrade is not worth it for your older machine and decide to ease yourself into a new machine gradually. I took this approach with my 2006 MacBook Pro, buying a Early 2011 model. I then upgrade to 10.7 on the older 2006 machine and glad I did, because it got bricked. Turned out 10.7 was a pretty awful upgrade and I was out of AppleCare, however 10.8 seems to be "normal" far as OS X upgrades go, some problems but not mass bricking of machines.

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

External hard drive not recognised after using disk utility to format

i formatted two external hard drives using disk utility on my mac mini, now they do not show in finder. they can be seen in disk utility but the repair options etc are greyed out?

Try http://pondini.org/OSX/DU1.html
Allan

How do I do this: "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk?"

"This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."

Stick the disk in, reboot holding c.
Disk Utility is a menu option about the 2 or 3rd screen in the installer. (don't install OS X!)
Because your booted form the installer disk, you can repair the disk.
Quit and exit the installer and reboot.
If your drive is not repaired, make a note of all what it says, for Apple to use.
Reboot and get your files off to a external drive,
Take the note and your comptuer to Apple for a warranty/Apple care call, they will replace the drive.

Using Disk Utility's Repair Disk Command with Time Machine

I'm trying to figure out whether or not I can use Disk Utility's Repair Disk command on a Time Machine volume. Time machine is taking a very long time to finalize its backups. I don't know if there are directory issues that need to be addressed or if it's due to the very large size of the directory. I've been using Time Machine on this computer since last January and the Time Machine directory takes up over 7 GB of disk space! It's so large that DiskWarrior will no longer work on that volume. DiskWarrior has a limit of 4 GB. I can't be the only one in this situation. I don't want my Time Machine backup to get hopelessly corrupted and then have to start agin. I'm trying to be proactive about correcting any issues before they become serious.

Jon
So far I haven't a clue as to what is wrong, so until a person stumbles in here with one, maybe you could amuse me with as to how you figured how much space the "catalog" is taking. I surely see nothing funny going on my system, although my Time Machine volume is smaller than yours and I might not be looking in all the right places.

Using Disk Utility to backup SD cards

Does anyone have any idea how to allow non-admin users to backup entire SD cards using Disk Utility on Mavericks? It now asks for an admin login and I cannot go round logging in every time one of the 300+ students here wants to back up their card after shooting some footage. There is a thread on the Mountain Lion board about this but the solution there was to edit etc/authorization but that no longer works in Mavericks as it is now all on an SQL database.
I have found the similar item within the SQL (security authorizationdb read sys.openfile.) but cannot change it (it returns NO (-60005) when I try to write to that section)
Cheers
Neil

Hi Tom,
Of course, that makes perfect sense! When I made my last disk image backup, my PowerBook had a serious, undiagnosed problem and I had booted from the startup disk to have a current backup of everything before I sent it off for repair.
Thanks for your help.
Rick

Formatting 2GB SD card with FAT32 using Disk Utility

Similar Messages

Maybe you are looking for