Formatting a Lacie Hard drive for Mac

Is there anyone who can help me format my Lacie 320GB external hard drive for my Mac. Currently it is formatted for MS-DOS. I've read the manual inside and tried what it says but have got nowhere. Any suggestions would be much appreciated. Many thanks

Can you see it in Disk Utility? If so, use the Erase command from there. To open Disk Utility, open Finder and press Command-Shift-U to open the Utilities folder. It's in there.
Select the option Mac OS Extended unless you want journaling, in which case select Mc OS Extended (Journaled)
Erase is the only tool you need.
Pete

Similar Messages

  • I cannot find the best way to format an external hard drive for MAC, PC, TV?

    Hello,
    I have a problem: I want to use an external hard drive on my Mac as well as on a PC and a TV. The normal structure of Mac (Journaled) isn't supported by PC/ TV. I changed the structue into DOS(FAT)  on my Mac. That's suppoerted by TV and PC. But I'll use the hard drive for storage of HD films so I'm afraid that the structure is not good enough for this (it seems old to me DOS.....) And I don't want the quality to be influenced by a bad structure.
    Then I've formatted into NTFS on my PC, but then I cannot put files from Mac on the hard drive.
    What is the best solution?
    Hope someone can help me!
    Regards, Kim

    FAT works great, but the problem is that it's old and that you can't store files that are bigger than 4 GB. In this case, you have exFAT, a filesystem compatible with OS X and Windows, but I don't think that the TV will read it.
    If you want to use NTFS, you need a third-party application to be able to write in it on OS X, like Paragon NTFS

  • Formatting 160gb LACIE hard drive for iBook

    I have just bought an external hard drive and did a back-up without formatting. None of my photos went over and I realised I had not formatted the hard drive. How should I do this - no clear instructions available. Thanks

    Disk Utility can be used to format the drive (as Mac OS Extended / HFS+) as well as to if desired partition the drive into multiple logical volumes (e.g., one partition for a clone of the hard drive, a second partition for a redunant backup of iTunes and/or iPhoto Library folders).
    LaCie drives labeled for Macs are already formatted as HFS+ / Mac OS Extended. A 160 GB Windows drive would be formatted NTFS which a Mac would be able to read but not write to. Did you backup only the photos? If nothing went onto the HD, it muight be NTFS. If non-photo files went over, it's lilely the drive is HFS+ and the problem is how you attempted to do the backup. What program(s) did you use to bakup the files? Did you doa Finder drag-and-copy, did you use SuperDuper! or CarbonCopyCloner or another third-party application, or did you use iPhoto to backup the pictures?

  • Formatting a new hard drive for mac

    Hi,
    In a previous post I asked about running Snow Leopard on my mac after a hard drive fail. I'm having issues with formatting a new hard drie in my mac. I have a 2007 black macbook and I'm trying to run a 160gb SATA seagate hard drive.
    After replacing this hard drive, I booted my mac up from cd, ran through setup fine until I got to the 'select a devide to install to' - the point where my hard drive should be visible. Nothing there at all. Nothing to click on in the box....
    My question is, is there a process I need to undertake to format the hard drive or is this an indicator of a much bigger problem?
    Thanks
    HC

    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    You can install OS X once formatting is complete by quitting DU and returning to the installer.

  • Formatting an external hard drive for mac.

    Hi- I just bought a SimpleTech Pro 1TB External hard drive from Best Buy. I already own about 4 other external hard drives of various brands (WD, Maxtor, Seagate, Etc.). If I remember correctly, in the past to format those drives for OSX, I've just gone into disk utility, selected the drive on the left, and went to the erase tab, chose volume format: Mac OS Extended, named it, clicked erase and a few minutes later my drive was ready for use. For some reason now I am getting an error (format failed) shortly after I click erase. It will allow me to choose fat32 to format the drive, but whenever I try for a Mac OS format I get this same error. Any ideas?
    By the way, I tried this on a Seagate drive yesterday and the same thing happened. So I returned it thinking it wouldn't work with a mac. So I don't think it's the drive.

    Choose partition and GUID in option and after format in HFS+
    Message was edited by: Nardac

  • Formatting an external hard drive for Mac/Time Machine.

    Hello-
    Just purchased a Time Capsule to use both as a wireless Network and backup hard drive. Both are working great. However, I have an external hd (500 gig "My Book") I used with a previous computer (PC). I would like Time Capsule/Time Machine to backup everything on the My Book external hd but I realize I need to reformat in order to have the Time Machine backup this drive. It appears that the only way to reformat the external hd is to erase it's contents. This isn't an option for me as this drive is almost full and has a ton of data I do not want to lose. Can anyone elaborate on how I can reformat this disk so it will be compatible with my new setup without losing any of it's contents? Thank you for your time and help.
    Matt

    Some 3rd-party apps, such as iPartition, claim to be able to do that. But they +*very prominently+* warn you to back up first, in case something goes wrong. And there have been a few posts here where something did go wrong and the user hadn't backed-up, so lost everything.
    iPartition (and I think all the others) cost money, of course. Instead of spending it there, your best bet is to get another external HD, a larger one. Copy the data to it, reformat the WD, and copy it back. Make sure Time Machine is backing-it up to your Time Capsule (ie., not listed in the exclusions box of +Time Machine Preferences > Options).+
    Then erase and partition the new one. One partition should be at least as large as your Mac's internal HD, the other 500 GB or more. Use this drive for "secondary" backups of both, via CarbonCopyCloner or SuperDuper. [CarbonCopyCloner|http://www.bombich.com> is donationware; [SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling.
    You might even want to get a portable HD for this, so you can take it off-site and also be protected against fire, flood, theft, direct lightning strike on your power lines, etc.

  • Formatting an external hard drive for Mac and Windows

    Hello,
    I just bought a brand new Seagate Expansion Desktop Drive (2TB) and am trying to work out how to format it. I want to move all my photos and movies to it from my laptop so i have more space. I have a Mac OS X 10.5.8 laptop but i also wanted to make sure it was compatible with other Windows computers in case i need to use it on someone else's PC.
    I've read through a few posts over the net and i am getting confused as i'm not IT-intelligent at all. I've seen there are possibly 4 different format types.
    Any help would be much appreciated.
    Thank you!

    Answered here: Formatting brand new external hard drive

  • When I try to format an external hard drive for Mac it keeps coming up as 'error'. Can anyone help me?

    I've followed the instructions on the online tutorial but when it is trying to erase the data it comes up with 'volume erase failed, could not unmount disk'.

    FAT works great, but the problem is that it's old and that you can't store files that are bigger than 4 GB. In this case, you have exFAT, a filesystem compatible with OS X and Windows, but I don't think that the TV will read it.
    If you want to use NTFS, you need a third-party application to be able to write in it on OS X, like Paragon NTFS

  • How do i format an external hard drive for use on both windows and mac book air?

    how do i format an external hard drive for use on both windows pc and mac book air?

    Use exFAT on the PC.
    (71374)

  • Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    format flash drive in Exfat for transferring files between Mac and Pc.
    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • WD "My Passport hard drive for Mac."

    Hi -
    New convert from Windows to MacBook Pro so I apologize if this seems like a dumb question BUT......
    Just purchased a WD "My Passport hard drive for Mac." It says on the box that it is formatted HFS+, Journaled for Lion & Mountain Lion as well as compatible with Apple Time Machine. My assumption is that based on this there is no need for me to format this for my Mac since this hard drive was already formatted specifically for a Mac.  However, since some of the other information I've seen online refers to always formatting your hard drive before use, I wanted to double check since I am just getting started with my

    As you are going to use Time Machine, it will ask you to format the external disk if there are files inside it when you set Time Machine up. Open System Preferences > Time Machine > Select Disk, choose the external disk and the backup will start.
    Also, you can create a second partition on the external disk to make clones with Carbon Copy Cloner or SuperDuper to have the advantages of Time Machine and the clone

  • Need help reformatting my hard drive for mac only

    Help please
    Need help reformatting my hard drive for mac only with my toshishba hard drive

    What Mac is this please, with what version of OS X?

  • How to Format Toshiba Hard-Drive for Mac with Parallels?

    Hello,
    I recently bought a Toshiba Hard-Drive with the following features:
    500GB
    It is a Canivo Basics 3.0
    It is USB 3.0 and 2.0 portable hard drive
    It has already been formatted NTFS for Windows XP, Vista, 7, and 8
    The box says that it can be reformatted for Mac
    I have a Macbook Pro with Retina Display that I bought this year in late March/early April.
    It runs OS X Mavericks, and Parallels Desktop 9 for Mac.
    I would like to reformat it so that I can use it on my laptop both with Windows and Mac OS at the same time. I do not wish to use a partition as I want to access the hard drive through Mac and Windows at the same time on my laptop and I also want to be able to access the Mac things on a Windows computer and vice versa.
    I have never formatted a hard drive before, and I would like to use a completely safe software, or no software at all, if it is possible.
    I am sorry but I don't have a very high knowledge of this.
    Thanks,
    Sandy-Wood

    It would be easier, using Parallels, just to format the drive for "Mac OS Extended (Journaled)". You can see it both in the Windows/Parallels and the Mac side. Leaving it formatted as NTFS is not going to allow you to access (write to) the drive unless you use third-party software. Formatting it for Mac lets you use it, as I said, on both the Parallels VM and the Mac side.
    If you were using Boot Camp, I would advise leaving it formatted as NTFS and purchasing NTFS for Mac to access the drive on both OS's. You can mitigate that by formatting the drive for Mac:
    Good luck,
    Clinton

  • How do I format a new external Hard drive for Mac?

    Simple question I know for many of you out there but I could do with some advice as I have never done this before. I would like to buy a new external hard drive to store my music and photos on. I will get one with firewire and usb2 connectivity.Could someone walk me through the steps needed to format and prepare a hard drive for use with my Macbook (if it is not already Mac formatted). Will any brand of hard drive work with Mac or are some better than others?

    In addition to what Templeto Peck said, make sure that you select the formating to be OSX Extended.
    As far as the best esternal drive, type into the "Search Discussion" box: Best external hard drive. This will bring you to several previouslly posted threads that discuss quite thoroughly your question. The following is extracted from one thread:
    The best drives are those that use the Oxford 911 chipset. I like the Mercury Elite Pro drives from OWC, but there are plenty of others that use the same chipset.

  • Formatting a lacie hard drive to work on a Mac and Pc

    I'm trying to get a lacie hard drive to run with both a Mac and PC. I'm formatting the drive using FAT32 on the PC but it's limiting me to 32Gb partitions. I do have another Maxtor drive with a 111Gb Fat32 partition and the Mac allows me to read and write to it, so I know it's possible. Any ideas how to format the drive with just one large partition. Thanks
    G4 Powerbook   Mac OS X (10.4.5)  

    Hi MC,
    Connect the hard drive to your Mac and format it as MS-DOS. It will work with both Mac and Windows.
    Jrsy

Maybe you are looking for