FORMATTING AND PRINTING

I have created my first form and am having page formatting issues and cannot figure out how to print it??

Hi;
Can you tell me more about your page formatting issues? Also what are you trying to print?
Maybe some of this will help...
For the HTML form (printing from the fillable form URL), there isn't any special support in the FormsCentral form for printing from the web browser, the browser and operating system would manage that print and would print whatever is shown in the browser window at the time.
As the author if you are looking to print the filled out form the best thing to print is the PDF of the response, in a Paid level account you can "Save Response as PDF Form" which looks like the original form filled out and would print correctly.
A few things you might find userful:
"View mode" - there are two "View" modes accessed from the "View" menu or the view selector at the bottom right corner of the form on the Design tab. There is "Web View" for designing your form for the web, and "Page View" for designing for a PDF. You can make changes in both views, the difference is that features not available in PDF are disabled in "Page View" and the "New Page" fields added are unique to each view (only create a new page in the corresponding form, HTML or PDF).
Page Setup - There is a "Page Setup" where you can define the width of the HTML page and the size of the paper when saved as a PDF.
Thanks,
Josh

Similar Messages

Help regarindg country formatting and printer formatting in scripts

Hi all,
I'm facing a problem printing the address in SAPscript. Though we try to display the field T005-LAND1 within Address -endadress, the field T005T-LANDX50 gets displayed.
For example- when we want to display countrycode as NL(netherlands), only 'Kingdom of the Netherlands' is diplayed.
i believe this is because of the Country format used in the adress. Is there anyway we can change the country formating.
Also the output gets different alignment when we use differnt printers for preview. is there anyway to overcome this?
Your replies will be very helpful and thanks in advance.

hi,
this is quite natural that ur print preview and print out differs and it differs from printer to printer.so, u have to define the paper size correctly and check if possible the type of printer they will be usually using.
here in ur case r u trying to pring the country key or country name.
in fact u have to pick the country key and print the country name in that place by getting the name from check table.

HT3952 How do I format and print envelopes on a MacBook Pro. Print them with the destination Barcode.

How do I formay and print an envelope on a new MacBook Pro, also print the envelope with delivery point barcode?

Install Aperture on the MBP. Then it's a simple process:
Export the Event as an Aperture Library. Copy it to the iMac. Import the Library to the main one there.

Month view display and print format

An earlier version of iCal would display (and print) the current month without showing the last few days of the previous month and the first few days of the next month to fill out a week. Is there any way in version 3.0.7 to display and print in this format again?

testing and testing and testing
here the newest info
it is not the letter size. small or caps letters.
i added a new pdf. here under the bold number you must see "581*LAVENDER". but with reader 9.x it looks like the printer cardridge goes empty.
i´ll go crazy with this sh... :-)
thanks
markus

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)

When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?

How To Generate And Print Reports In PDF Format From EBS With The UTF8 Char

Hi,
I want to know How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set in R12.0.4.
Regards

Refer to Note: 239196.1 - PASTA 3.0 Release Information
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=239196.1
Or, you can use XML Publisher.
Note: 551591.1 - Need Latest XML Publisher / BI Publisher Patches For R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=551591.1

Error The File "Print.ai" is in an unkown format and cannot be opened adobe Ilustrator 5.5

I am getting an error The File "Print.ai" is in an unkown format and cannot be opened adobe Ilustrator 5.5 on Mac OX 10.10.2 but was also the same in Mac Mavericks. any thoughts?

d,
In addition to what Larry said, there is a number of levels you can try for general issues, described in the following list. 1) and 2) are the easy ones, 3) is the basic preference file (irreversible procedure), 4) is the whole preferences folder (reversible and more thorough, needed for some issues), 6) is the full ultimate solution, 5) can be skipped in this case.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Schedule workbook for print .pdf format and broadcasting

Hi
I want to know how to print a workbook into .pdf format and send mail.
I prove with Broadcasting, but this working only with xls or zip format.
I work with workbook because in this report can have columns' size constant.
Thanks for yours help.
Verien

when ever u r trying to send work book across as a mail u will have only one default option ie excel sheet.i didnt see any option of exporting working as a pdf etc .
hope this helps.

Score and printing, redo all formatting every time..

I have a big problem that needs to be resolved ASAP!
I arrange music for big band (or large ensemble) and when I get my individual parts looking good, and print them out, I can't get the same page layout if I have to go back and change anything in my individual parts. Let's say that if I change one chord and that changes one bar in the song, I have to redo all the formatting every time and for ALL THE BAND! 19 parts...
Is this possible to get something locked?
It's to much work compare to Finale!
Cheers.
jOTaz

Topic : SCORE, MAJOR BUG
the answer is there!

HELP to Open and Print automatic a REPORT

Hello, I'm a Portuguese Developer, and i've a challenge, that is, i want to open REPORT by FORMS in RDF format and i want to open and print automatic way, i do not want to open, and then have to go print button to pint them.
I want to open by FORM way and print automatic and close imediatly.
HEP ME PLEASE!
Thank you

Aslam o Alikum (Hi)
Ofcourse you can do this by specifing system parameters like DESTYPE=Printer and DESNAME=PrinterName
Replace PrinterName with you printer name
See System Parameters in Reports Under Data Model

Unable to schedule a report to email and print

I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
        IInfoObjects results = null;
        ISchedulingInfo schedulingInfo = null;
        try {
           results = iStore.query(query);
        } catch( SDKException sdke ){
           logger.error(sdke);
        if( !results.isEmpty() ){
            // get the actual report object from collection and set scheduling information
            IInfoObject report = (IInfoObject)results.get(0);
            schedulingInfo = report.getSchedulingInfo();
            schedulingInfo.setType(CeScheduleType.ONCE);
            schedulingInfo.setRightNow(true);
            schedulingInfo.setRetriesAllowed(3);
            try {
                Set<String> keys = destinations.keySet();
                Iterator i = keys.iterator();
                while( i.hasNext() ){
                    String dest = (String) i.next();
                    if(dest.equals(CrystalDestinations.EMAIL)){
                        // get the destination object and set it to SMTP plugin
                        List emailAddress = destinations.get(CrystalDestinations.EMAIL);
                        IDestination destinationObject = schedulingInfo.getDestination();
                        destinationObject.setName("CrystalEnterprise.SMTP");
                        IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
                        ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
                        smtpOptions.setDomainName( emailDomain );
                        smtpOptions.setServerName( smtpHost );
                        smtpOptions.setSMTPUserName( smtpUser );
                        smtpOptions.setSMTPPassword( smtpPass );
                        smtpOptions.setSubject( "Email for report " + report.getTitle() );
                        smtpOptions.setMessage( "This is the message body" );
                        smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
                        smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
                        for(int j = 0; j < emailAddress.size(); j++ ){
                            smtpOptions.getToAddresses().add( emailAddress.get(j) );
                        destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
                        List printers = destinations.get( CrystalDestinations.PRINT );
                        IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
                        printerOptions.setCopies(1);
                        printerOptions.setEnabled(false);
                        printerOptions.setPrinterName( (String)printers.get(0) );
                        printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
                List reportPrompts = ((IReport)report).getReportParameters();
                for(int j = 0; j < reportPrompts.size(); j++){
                    IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
                    if(prompt.getParameterName().equals(mdrParamName)){
                      IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                      v.setValue(reportParameters.get(mdrParamName));
                    } else if(prompt.getParameterName().equals(addressParamName)){
                        IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                        v.setValue(reportParameters.get(addressParamName));
                IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
                format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
                iStore.schedule( results );

Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan

HELP!!Need to import and print vector drawings

I am trying this topic again in the hope of help. I need to
import drawings in a vector format for printing. These drawings
will be cast members not sprites. I have tried printing a swf
version via Printomatic but it cannot print Flash members. My
questions are:
1. Is therre any way to print a swf cast member (not a
sprite)
2. How can I import an EPS file? - I have heard that it can
be done but every version I have tried seems to fail

Darrel Plant has written an importer for .ai and .eps files.
You can get
it at:
http://www.moshplant.com/direct-or/ps2vs/
Haven't used it for a while but it works pretty good.
Downside is that it creates multiple members because Director
can't
(couldn't?) handle multiple-line vector members.
Dsotm wrote:
> I am trying this topic again in the hope of help. I need
to import drawings in
> a vector format for printing. These drawings will be
cast members not sprites.
> I have tried printing a swf version via Printomatic but
it cannot print Flash
> members. My questions are:
> 1. Is therre any way to print a swf cast member (not a
sprite)
> 2. How can I import an EPS file? - I have heard that it
can be done but every
> version I have tried seems to fail
>
Manno Bult
[email protected]

Pages - Share and Print - Email document issue

I ran into an issue today on my iPad2 and wanted to see if it was just me or can anyone reproduce this error. If it turns out to be just me, someone help me undertand how to get around the issue. If it is more widespread, where do I report this so it can be resolved in an future release?
Here is what happened.
I received a Word document via e-mail. When I opened it in e-mail and chose to "open with Pages" it worked fine. Imported into Pages sans the font (which I've come to expect). Then I edited the document (it was a quick survey I was taking) and then was ready to send it back to the person who sent it to me. I chose the tools icon, selected "Share and Print" then selected "Email Document" and then chose Word as the format. It converted it and attached the file in a blank e-mail ready for me to address and send.
Well, I wasn't ready to send just yet. So I clicked on "Cancel" and then "Save Draft" which it did successfully. Then I went into email, edited my "Draft" in my Drafts folder, addressed it, etc. and sent it on its merry way. Well, guess what? The file did not come through on the e-mail. Just my text.
I tried "copy and paste" of the file after saving as a draft and it only sent the "picture" of the file ICON and not the file itself. I tried multiple times saving it as a draft and then sending and it never worked.
If I send from within Pages right at the time after "Email Document" is selected, it works every time. It seems to only be when I save the email as a draft from within Pages that it will not send the attachment or something happens to the attachment. I did notice also, that if I edited any "text" from that draft and then saved the draft again, all my edited text wouldn't save either. So any "Draft" saved from Pages I couldn't edit regardless of any attempt.
Draft saving and editing within the email application works as expected.
NOTE: Just before submitting this discussion, I tried the above on my wife's iPad2 with the same results. Anything "saved as a draft" from Pages in e-mail, will not send the attachment. Anything sent directly from within Pages and not saving it as a draft, will send the attachment.
There are times I would like to save it as an attachement, should this work? Thanks everyone!
Edward

I am only vaguely familiar with iWork.com. I know it is a cloud based way to share documents with others, but this is what the send to option does when you work with Pages, Numbers or Keynote on the iPad. I would assume that the function performs the same way in iWork.com. - but it is only an assumption.
"Send to" is the command that will let you send that file to your computer the next time you sync with iTunes. It is the way the iPad transfers the file to your computer - the iPad method of file sharing. You can sync files back and forth from iPad to computer with file sharing as long as the app on the iPad is compatible with a similar application on your computer. In your case iWorks apps on both the iPad and your Mac.
This article will explain it in great detail for you.
http://support.apple.com/kb/HT4088

To upload a RTF and a PDF file to SAP R/3 and print the same through SAP

Hi,
I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
report z_test_upload .
data: begin of itab occurs 0,
         rec type string,
      end of itab.
data: options like itcpo.
data: filename type string,
      count type i.
data: filetype(10) type c value 'ASC'.
DATA: HEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: NEWHEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: ITFLINE LIKE TLINE    OCCURS   0 WITH HEADER LINE.
DATA: RTFLINE LIKE HELP_STFA OCCURS   0 WITH HEADER LINE.
DATA:   string_len TYPE i,
        n1 TYPE i.
selection-screen begin of block b1.
parameter: p_file1(128) default 'C:\test_itf.rtf'.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
       IMPORTING
            file_name = p_file1.
start-of-selection.
move p_file1 to filename.
call function 'GUI_UPLOAD'
     EXPORTING
          filename                = filename
          filetype                = filetype
     TABLES
          data_tab                = itab
     EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          others                  = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
loop at itab.
string_len = strlen( itab-rec ).
n1 = string_len DIV 134.
ADD 1 TO n1.
DO n1 TIMES.
    rtfline-line = itab-rec.
    APPEND rtfline.
    SHIFT itab-rec BY 134 PLACES.
ENDDO.
endloop.
HEADER-TDSTYLE = 'S_DOCUS1'.
HEADER-TDFORM = 'S_DOCU_SHOW'.
header-tdspras = 'E'.
CALL FUNCTION 'CONVERT_TEXT'
EXPORTING
CODEPAGE               = '0000'
    DIRECTION              = 'IMPORT'
    FORMAT_TYPE            = 'RTF'
   FORMATWIDTH            = 72
    HEADER                 = header
    SSHEET                 = 'WINHELP.DOT'
    WITH_TAB               = 'X'
    WORD_LANGU             = SY-LANGU
    TABLETYPE              = 'ASC'
TAB_SUBSTITUTE         = 'X09 '
LF_SUBSTITUTE          = ' '
REPLACE_SYMBOLS        = 'X'
REPLACE_SAPCHARS       = 'X'
MASK_BRACKETS          = 'X'
IMPORTING
    NEWHEADER              = NEWHEADER
WITH_TAB_E             =
FORMATWIDTH_E          =
TABLES
    FOREIGN                = RTFLINE
    ITF_LINES              = ITFLINE.
LINKS_TO_CONVERT       =
if sy-subrc <> 0.
endif.
CALL FUNCTION 'PRINT_TEXT_ITF'
EXPORTING
     HEADER        = newheader
     OPTIONS       = options
IMPORTING
RESULT        =
TABLES
    LINES         = itfline.
if sy-subrc <> 0.
endif.
Any hints or suggestions to solve this problem will be highly appreciated.
Thanks,
Avra

Hi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules   |Export Images through Function Modules;.
Hope it helps you.

FORMATTING AND PRINTING

Similar Messages

Maybe you are looking for