Formatting external drive for MacBook Air.

Hi All, I have a MacBook Air and just bought external driveI see it's in NTFS. Do I have to convert it to FAT before using?
I've looked all over preferences, under the drive itself etc etc. Can't find how to do this.
all info most appreciated!
fm

No, highlight the drive and use the Erase tab.

Similar Messages

  • Using external drive for MacBook that was previously used for PC

    I can't be the only person who'd had this issue...but I can't seem to find anything about this problem.
    I have an external drive that I was using for my iTunes library on my PC. I recently upgraded to a MacBook. I was hoping to continue using my external drive for my iTunes library. When I plugged the external drive into the MacBook, it characteristically made my life very easy by quickly setting up itunes for me. It wasn't until the next day I realized that my entire library had been copied from the external drive onto the MacBook hard drive. This was not my intention.
    It seems, however, that though my nifty new MacBook can easily read and use any files from my old external drive, it absolutely will not write to the external drive. In fact, even though I've repeatedly changed my iTunes settings to use the external drive for the iTunes library, it continues to write CD's onto the Macbook hard drive.
    sigh
    I'm very worried that:
    1. I've now used 4 of my 5 "authorized" machines
    2. I've used another move that I can make with the music I've purchased on iTunes and I will now have to use yet another move in order to make this right
    3. I fear if I back up my music now, because of 1 & 2 I will lose my rights to some of my music.
    If anyone has any help for any of these issues I would be very grateful! This is my first Apple in about 20 years, so be gentle!

    martinifontaine wrote:
    It seems, however, that though my nifty new MacBook can easily read and use any files from my old external drive, it absolutely will not write to the external drive.
    i'm guessing this is a NTSF formatted drive. in order for your Mac to write to it, you need to install e.g. NTFS-3G
    In fact, even though I've repeatedly changed my iTunes settings to use the external drive for the iTunes library, it continues to write CD's onto the Macbook hard drive.
    above will probably take care of that
    I'm very worried that:
    1. I've now used 4 of my 5 "authorized" machines
    you can deauthorize the PC if no longer in use. also, once you've reached the "5-computer" limit, you get the option (once per year) to *deauthorize all*, then reauthorize those in use. click here for information.
    2. I've used another move that I can make with the music I've purchased on iTunes and I will now have to use yet another move in order to make this right
    not sure what you mean by move.
    3. I fear if I back up my music now, because of 1 & 2 I will lose my rights to some of my music.
    no. you can transfer purchased content between authorized machines as much as you want. see _*iTunes for Mac: How to copy purchases between computers*_.
    JGG

  • Formatting External drive for Mac05

    I am trying to format a Western Digital external drive for Mac05 Extended (journaled) in order to transfer photos from my I photo program to free up space on my hard drive, as per suggestions received in this support site. I have downloaded information from Western digital, but it is coupled with 'How to partition and format an internal slave drive or an external drive in a Mac OS X." Once I select Disk utility, the drives are not displayed. Anyone have any suggestions how to format the external drive for Mac05 Extended (journaled)??

    I am trying to format a Western Digital external drive for Mac05 Extended (journaled) in order to transfer photos from my I photo program to free up space on my hard drive, as per suggestions received in this support site. I have downloaded information from Western digital, but it is coupled with 'How to partition and format an internal slave drive or an external drive in a Mac OS X." Once I select Disk utility, the drives are not displayed. Anyone have any suggestions how to format the external drive for Mac05 Extended (journaled)??

  • Formatted External drive for Mac OS extended

    Hi,
    I actually change from windows to Mac (no comparison...!!) but trying to transfer my photos (Pictures in finder) to an external hard disk i can`t drag and drop and i do not know why....i read in one forume that i have to formatted the external drive for Mac OS extended. First question: how could i do that? if my hard disk was originally formatted for windows, do i lose the info when i formatted?
    Thanks!!

    You will lose the files on the HD when you reformat it.  So copy what you want off the drive to a folder on your Mac temporarily. 
    select the HD on the Desktop and launch Disk Utility.
    select the HD in the left hand page of DU.
    click on the Partiton button
    select 1 Partition
    select OS X Extended (journaled) in the drop down Format menu.
    click on the Apply button
    drag the folder of files onto the EHD to copy back and then delete from your Mac's drive after verifying that they all copied back successfully.
    OT

  • Formatting external drive for storage/backup/video files

    Hi,
    I just purchased a 500mb My Book Pro external drive for use with my imac duo which runs Windows XP via bootcamp. This computer is shared by three family with very different skills and needs. My dilemma. I want to format the drive so that the imac can be backed up easily three users. It is formated Fat32 and is supplied with Restrospect Express 7.5 backup software. It would be nice to backup the modestly used windows sector, but that's a secondary consideration. My problem is that one user has a lot of larger than 4 gb video files which are too large the Fat 32 format. My notion is to segment the backup drive so that I leave 300 mb in fat 32 to facilitate backup with supplied software, and segment a second 200 gb drive using mac os extended so that the user can manually move her video files for storage/backup on the backup drive. Is there a simpler solution? For example, if I formatted the entire 500gb as mac os extended, could I still run the retrospect backup software? If not, is there a reasonably priced alternative software? And finally, with either Fat32 or Mac OS extended, can I move files from the Windows platform? Would I be better off just biting the bullet and telling my daughter to make her own arrangements to compress and backup her video files or get her own hard drive, thus leaving the backup drive to the simple factory supplied software solution?
    G-4 and iMac core duo   Mac OS X (10.4.9)   use emacs and imacs at work location

    Hi,
    I just purchased a 500mb My Book Pro external drive
    for use with my imac duo which runs Windows XP via
    bootcamp. This computer is shared by three family
    with very different skills and needs. My dilemma. I
    want to format the drive so that the imac can be
    backed up easily three users. It is formated Fat32
    and is supplied with Restrospect Express 7.5 backup
    software. It would be nice to backup the modestly
    used windows sector, but that's a secondary
    consideration. My problem is that one user has a lot
    of larger than 4 gb video files which are too large
    the Fat 32 format. My notion is to segment the backup
    drive so that I leave 300 mb in fat 32 to facilitate
    backup with supplied software, and segment a second
    200 gb drive using mac os extended so that the user
    can manually move her video files for storage/backup
    on the backup drive. Is there a simpler solution? For
    example, if I formatted the entire 500gb as mac os
    extended, could I still run the retrospect backup
    software? If not, is there a reasonably priced
    alternative software? And finally, with either Fat32
    or Mac OS extended, can I move files from the Windows
    platform? Would I be better off just biting the
    bullet and telling my daughter to make her own
    arrangements to compress and backup her video files
    or get her own hard drive, thus leaving the backup
    drive to the simple factory supplied software
    solution?
    G-4 and iMac
    core duo   Mac OS X (10.4.9)   use emacs
    and imacs at work location
    Hello,
    You're indeed in a pickle. If you use Bootcamp and want the HD accessible via the Mac and WinXP, then you don't want to format it as Mac HFS because WInXP wouldn't be able to access it. If you go FAT32 then both WInXP and Mac OS can access it, but you face the dilemma of the 4GB threshold.
    If you format as NTFS, then you eliminate the 4GB threshold but then Mac OS cannot access it.
    I have a similar dilemma, which is why i use Parallels more than Bootcamp. I have 2 external FW HD's (160GB/250GB), both formatted to Mac HFS. The 160GB i have partitioned as 50GB and 100GB. I have a bootable backup of Mac OS residing on the 100GB partition (yay to SuperDuper!) and some other stuff on the remaining 50GB. The 250GB is exclusive for movies (cough..cough..bittorrent) and for streaming via Orb 2.0 to my Treo. I have WinXP running in Parallels, and Vista Ultimate via Bootcamp. In Parallels, i can access my external HD's via Parallel's Shared Folders but in Vista (Bootcamp) since the HD's are in a non-Windows recognised formatting, they're not accessible (which is a bummer, as i'm loving Win media center).
    What you can do is partition the HD the way you're thinking and format (one part Mac HFS and the other NTFS), but my best recommendation is that with the falling prices of HD's nowadays, why not just get a seperate HD do what you want with it. I spied a WD MyBook 500GB USB HD at CompUSA for $129.99 (no mail-in rebate nonsense) and similar good prices at Bestbuy and Newegg.com.
    iMac 17" 2GHZ C2Duo 2GB RAM 160GB HD   Mac OS X (10.4.9)  

  • Asus external drive and macbook air

    My sister in law recently purchased a macbook air from an online store that's affiliated with her work. Unfortunately, the apple products that they got their are too expensive. At the same time they are not new models but definitely brand new. I recently bought an asus external usb drive (SDRW-08D2S-U). I actually bought thiss o I could fix her other laptop that runs windows 8. I was wondering if this would work on OSX mavericks? You see the macbook air would arrive next week. I believe this macbook runs mountain lion. I plan to upgrade the software to osx mavericks once it gets delivered. Do you guys suggest buying a super drive instead for the macbook air?

    Your questions don't really make any sense, especially the last one.
    The Apple Superdrive is an external DVD drive. The Macbook Air is a Complete computer (except it does not have a DVD drive built in).
    As to the drive it can be formatted to work with any operating system, Mac OS X, Windows, Linux, Solaris, Whatever.

  • Format external drive for use with both Leopard & XP, & maybe Win7

    I want to repurpose one of my old small Firewire drives to use with both Leopard and XP via Boot Camp on my MacBook. It is is 60GB and is currently formatted with MacOS Extended Journaled, and Apple Partition Map. I don't think I will have any need at the present time to store files of more than 4GB on it (most of the ones I want to store are no more than a few hundred MB each).
    Is using FAT32 with Master Boot Record adequate? Up until now I have just used flash drives for external Windows storage, but I would like to consolidate lots of topographic maps files onto this one Firewire drive instead of using multiple flash drives, and use these files with both Leopard and XP. If I want to try Windows 7 in the future via either Boot Camp or virtualization, will there be a problem with FAT32/MBR?

    Hi,
    using FAT32 as file system and MBR as partition table should work just fine with OSX and all Windows versions up to 7.
    And since your files don't come close to 4GB single-file-size, that FAT32 limitation is no hinderance.
    Use Disk Utility to do this, since Windows won't format partitions/drives with more than 32GB to FAT32 (built-in limitation).
    Nonetheless it can use such partitions (I have a 200GB on my external HD).
    Regards
    Stefan
    Message was edited by: Fortuny

  • Format external drive on macbook pro

    Hi,
    HI,
    I have a  question  on  " to format an external drive " (I bought an 'intenso). I have a macbook pro running  mountain lion and found already some answers via different replies  but before doing anything I should not do, I would like to ask you waht exactly I have to select on the disk utility
    - at the left side of the disk utility : what should I choose
                                   first line 1tb intenso external  USB
                        OR
                                  second line intenso mounted partition
    - at the right hand side : what should I choose
                           selecting on  first  line option on the left  I  have 4 options at the right hand side  (journaled, journaled / encypted, case sensitive /
                                                                     journaled or case sensitive / journaled / encrypted)
                        OR
                        selection  the second line option on the left  I have only 2 options  at the right hand side  ( journaled or  case sensitive / journaled )
    What to select ?
    After doing the above,  will the external be ready or do I have to do something else. Noticed somewhere "encrypt" ?
    Thanks for giving me some more details.
    Brigiitte

    Hi,
    Thank you so much but I need some more help.
    The drive is new and there is nothing on it so that should be fine.
    But when i go to "partition", I see indeed the "options" buttom but I can not select it. It says I have to select a partition scheme. On the screen it shows "Partition layout  -- current" and when I change it to "1 partition" I can follow the steps you mentioned (I can select up to "16 partitions").
    Should I select "1 partition" ?  What does this mean ? Maybe you know a link where I can find info on that subject as I want to learn something more and know at least   what I am doing.
    Thanks.

  • Audio driver for MacBook Air and Windows 8?

    Is anybody aware of a solution to get audio from the built-in audio device of the latest MacBook Air under Windows 8 Pro?

    SP Forsythe wrote:
    A few seconds? LOL Doing a clone of 200 GB is a tiny fraction ofthe time of USB 2.0. T-Bolt is faster than Firewire 800. The difference is dramatic compared to USB 2.0.
    The OP asked for "best" portable drive, not the cheapest.
    Maybe you got mega bucks, but for me throwing money at at Thunderbird drive is STUPID.
    How many times a day are you cloning your 200GB drive?   Must be several times a day.
    I'm all for getting the fastest computer with the most HP, but for backup money I'm going with USB external drive. I probably should state that I run my Time Machine about once a week.

  • How to format external drive for mac AND pc use

    hi
    i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
    can i partion one part for ms-dos and part for macos extended?
    cheers
    -j-

    There are a couple of disadvantages with formatting a
    disk as FAT32. Firstly, there is a limit on the file
    size for FAT32. I think it like 2 GB so if you
    capturing video the results will probably not fit
    into this file limit. Secondly FAT32 will not be
    bootable. I alway clone my system to a backup disk as
    bootable. That way if anything goes wrong with my
    system, I can just boot from my backup disk and fix
    it.
    The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
    iFelix

  • Format external drive for Mac and PC?

    Can I format an external Drive to have 1 partition for OS X and another for my wife to use with her PC?
    thanks!
    ray

    Yes, just use Disk Utility under OS X to create two volumes on it, one Mac OS Ext, the other FAT. Use a Master Boot Record partition scheme (also known as “fdisk”).

  • Using iMac (Target Display Mode) as an External Display for MacBook Air

    I have a Mid 2010 iMac with a 2 thunderbolt ports. I now have a brand new MacBook Air (2012 Core i5 1.8GHz with 8GB RAM) with a thunderbolt port. I have a Belkin Mini Displayport Cable to connect the two. I want to use the iMac as an external monitor for the MacBook Air. I cannot seem to get this to work. Can I do this? Do I have the right cable?

    You can do it but you need a thunderbolt cable to connect the two.  Then just hit CMD F2 on the iMac and it will enter Target Display Mode.

  • Using tv as external display for MacBook Air?

    Does anyone know how to use a 21.5" Samsung LED TV with 1920x1080 resolution as the external display for a MacBook Air A1369 running OS X 10.6.8 (broken screen)?

    I guess you have to buy a Belkin HDMI routing cable. From Thunderbolt/Display port to HDMI.
    Then plug it in to your macbook and into your tv. Then press CMD+F1 and voila.
    If you still have any problems, i like to hear from you.

  • Format External Drive for HFS+ volume and FAT32 volume with Disk Utility

    I just bought a Seagate 1tb external drive from OWC and I want to partition it into a HFS+ (journaled I assume) volume and a NTFS volume. Objective: To manually backup critical folders from my wife’s Dell (running XP) to the NTFS volume and critical Mac folders from my PowerBookG4 to the HFS volume.
    My plan was to have my Mac (10.4.11) do the partitioning into a 350gb FAT32 volume for Windows and a 650gb HFS+ volume for Mac – then take the external drive to the Dell and have the Dell reformat the 350gb FAT drive to NTFS.
    First question – Is this possible overall?
    Second question – I haven’t been able to get my Disk Utility on my Mac to do the initial partitioning into one HFS volume and one FAT32 volume the way I want it. Is this step possible?
    I’m happy to be more specific about the steps I’ve taken if the basic plan is good. From what I’ve found in some forums so far, I think I’m on the right track but am unable to execute it. Thank you.

    Thank you Limnos for all your help. Last night I tried again and it worked! I’ not totally sure on what I did right but:
    • Both volumes on the new ext. driver were HFS (from my last attempt the other day) so I looked into a simple erase of one partition/volume into a different format, but DU did not offer a way of erasing it into MS-DOS(FAT32). But I think I did a simple HFS erase anyway of the volume I wanted to format to FAT32. There was nothing “in” that volume because this was a new external drive but I figured it could not hurt anything.
    • So then, I think I went back to Partition, locked the partition/volume that I wanted to keep in HFS+ for my Mac files, and (re)partitioned the other just erased volume to MS-DOS. I think I did it under the MBR option.
    • It worked! Not sure why but my Mac recognized both volumes one as HFS, the other as FAT32. Maybe someone will find this useful some day!!
    • Then, I hooked up the drive to my work Dell, the Dell found only the FAT32 drive (as expected), and I executed a short simple easy command I found on ehow.com (search for ‘convert FAT32 to NTFS’) to make that volume NTFS.
    Thanks again Limnos and everyone else!

  • Can't format external drive for Mac

    I got an external Seagate Freeagent 750GB drive to use with my new Mini. It came formatted as a windows FAT volume. Since I don't have a FW400 to FW 800 cable yet, I have it connected via USB. When I try to reformat as a Mac drive (with any of the 4 case-sensitive / journaled options), I get an error, but I can then reformat as FAT. Does anyone know how I can format this drive as mac and what the problem is?

    It may have something to do with the partition scheme. There are at least three different schemes. One is used for windows formats (so you can use FAT32 or NTFS format), one is used for Intel Mac (probably GUID, not sure), and one is used for PowerPC Mac (probably the Apple Partition Map, again not sure). I don't know whether it is smart enough to choose the appropriate scheme for you when you have selected a format for your partition. Try to select the right scheme for Intel Mac first, and then decide on the format on each (if you have more than one partition on that disk) partitions.
    I think you have to make sure the format is compatible with the scheme, especially when you have multiple partitions on one disk. You can't format one partition to FAT32 and another to HFS+, although it will try to do something, but it will end up with error.

Maybe you are looking for

  • Recovery of Win 8.1 on HP 15-r151nr

    Hi! I have notebook HP 15-r151nr My notebook has a pre-installed Windows 8.1 single language OEM But I re-install Windows 7 on my notebook. GPT (or MBR) was replaced and recovery partition was deleted. But then I was need Windows 8.1 again. I have in

  • View Links? What do they offer?

    I'm new to BC4J and I may be misunderstanding what view links are for but it seems to me that I can accomplish the same thing with a View Object. What I mean is: It seems that the main purpose of View Links is to join View Objects. Why join the Views

  • How to know whether Cost Managers are down in 11i.

    Hi, Is there a way to find in 11i as an Oracle apps DBA ,whether the Cost Manager,Lot Move Transaction,Material Transaction are down. Thanks -Ganga

  • Alert window on opening a form with dup. program unit in form and PLL

    Can anyone help here? I'm upgrading a large system from forms 4.5 to forms 6i (yes, we're behind). I use an attached library for about two dozen procedures. In some cases, some of the procedures have been overriden in the Form. When I open the form i

  • Console not working after CF 10 install

    I have installed CF 10 and the console in CF Builder 2 no longer seems to work? Both products are fully up to date and I have the same issue on 3 separate dev machines.  All else, works fine.  Did somethin change with CF 10? A complete frsh re-instal