Formatting issue with network printer

I have a bitmap report with a repeating frame (1/2" X 2") that
prints 3 across and 10 down per page in Reports 10g(9.0.4)
Text inside the frame is size 8 Helvetica. I am getting a huge difference
in formatting when I send it directly to network printer(in Unix) versus
when I do STD Screen in Pdf format and send it to local printer in windows.
Output in network printer is bigger and wider, it almost overflows from the
page, where as its perfectly fine when I display the output in Pdf and send it to
local printer.
Is there a way to fix this problem so the output looks exactly the same whether
you send it to network printer or to pdf?
thanks
arniko

Hi Arniko,
Have a look at : http://download.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm I think it offers a good starting point to troubleshoot the issues when printing fonts in reports on Unix.
Thanks,
Adina

Similar Messages

Issue with network printing after installation of 10.5.6.

Ehhmm, sorry if I disturb, but can you help me? I cannot print/scan over wireless time capsule since I have installed 10.5.6. The printer is connected to a windows cable network. Before everything performed perfectly. The printer is a HP Photosmart 3210 all in one. I have already installed the newest software.
Thnk you. CP

i tried the firewall settings, but that didn't help.
after reading for hours, downloading useless drivers, resetting the printer, plugging and unplugging and on and on, i uninstalled and then reinstalled by HP printer software (the disc that came with the printer years ago) for the second time. Configured the printer with the printer USB plugged into my Airbook. That was never the problem - always worked fine.
Then I turned the printer off, plugged the USB into the Airport Extreme Base Station, unplugged the Airport Extreme Base Station, plugged it back in, turned the printer on. And lo and behold when i went to my SysPrefs, Print and Fax, and added another printer, it was recognized as a bonjour printer (that was always the case - the hold up was that it wouldn't find an appropriate driver), and when I chose AutoSelect for the driver, it came up with one! This was where the hang up was before. It selected a 2.2.9 driver, and when the printer is plugged directly into my computer via USB it uses a 4.0.1 driver - who knows why. but it's printing.
i had also read that it might be impossible to run this particular HP officejet all-in-one (5510v) wirelessly, so i'm very happy. hope this can help someone else.

Printer issue with network printer model # laserjet 4350tn

printjobs of multiple pages is inserting blank pages in the job ex. if its an 6 page job it will mix in 1-2 blank pages in between.
Is it mechanical a setting on the printer itself or the printer properties on the network that is causing it.
Users experiencing issue have windows xp

after perhaps 1/4 page of print I get an "out of memory" error message.
You are probably using background printing. Your print image is written to a spool file and the keyboard is freed up for your use, while the de-spooler (such as Print Monitor, Espon3 Background, or whatever that printer uses) works in the background, sending your document to the printer.
The out-of-memory message is likely coming from the de-spooler, not the Mac OS. To fix, either allocate more memory to your de-spool program, or print "live" and endure not being able to use the keyboard while your document prints.
I have max ram installed (384MB)
Contrary to what the knowledgebase says, all models and all revisions of Beige G3 can run 3*256 MB RAM, for a maximum of 768 MB total, provided you install the correct 256 MB modules for a Beige or Blue & White G3. There are module height limits for the desktop model, modest ones for the tower, and for all practical purposes none for the All-In-One.
If I boot straight into OS 9, ... the USB port doesn't show up in the port list.
If you are using the same image for Classic and Mac OS 9, you may not have the correct Mac OS 9 drivers for the USB card installed. The simplest fix is to re-install Mac OS 9, taking care to Re-install all Networking items. It is not destructive, and generally takes only a few minutes.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT     STATE SERVICE     VERSION80/tcp   open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http    HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http        HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT     STATE         SERVICE      VERSION
80/tcp   open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open          tcpwrapped
443/tcp open          ssl/http     HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5:   9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open          netbios-ssn
631/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open          tcpwrapped
7435/tcp open          tcpwrapped
8080/tcp open          http         HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open          jetdirect?
9220/tcp open          hp-gsg       HP Generic Scan Gateway 1.0
137/udp open          netbios-ns   Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open          snmp         SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
|   Wifi0
|     IP address: 192.168.1.211 Netmask: 255.255.255.0
|     MAC address: a0:d3:c1:bd:c8:32 (Unknown)
|     Type: ethernetCsmacd Speed: 10 Mbps
|     Status: up
|_    Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
|   TCP 0.0.0.0:7435         0.0.0.0:0
|   TCP 192.168.1.211:56076 15.201.145.52:5222
|   UDP 0.0.0.0:3702         *:*
|   UDP 127.0.0.1:666        *:*
|_ UDP 192.168.223.1:67     *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
|   NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
|   Names
|     HPA0D3C1BDC832<00>   Flags: <unique><active><permanent>
|     MSHOME<00>           Flags: <group><active><permanent>
|     HPA0D3C1BDC832<20>   Flags: <unique><active><permanent>
|     HPPS7525<00>         Flags: <unique><active><permanent>
|_    HPPS7525<20>         Flags: <unique><active><permanent>
| smb-security-mode:
|   Account that was used for smb scripts: guest
|   User-level authentication
|   SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT      ADDRESS
1   23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
           Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Hi, I'm facing a problem with my old printer, the xerox phaser 3160n. It was connected to my notebook through network connection, and everything works well with Adobe X /Win 7 OS (including the double side print, of course) last month, I have upgraded my NB to windows 8 with clean install
clean install my printer driver for windows 8 too, and Adobe reader XI was also downloaded through official website.
However, since I was about to use double sided print in Adobe reader XI (11.00.02) it couldn't obey the order, but just print one side as usual
I have checked the "option" of my printer, and it was correctly set to "double-sided print". I have tried word 2013 to open the same pdf, and choose the same "double-sided print" and it works perfectly.
Is this problem a bug? and would it be corrected in the next update version??
(I remeber I've saw a similar issue too, with network printer, but I couldn't find it)
Thanks!!!

Hi,
Meanwhile, after insatlling the latest driver for printer from the manufacture website, restart the spooler service as a test.
Start > Run > cmd and type "net stop spooler" after that "net start spooler" or start > run > service.msc and restart it over the GUI.
Run Printer Troubleshootor under Action Center\Troubleshooting\Programs\Printer, and check if it helps.
And yes, the manufacture should have more sence about the printer, it's recommended to contact them.
Yolanda Zhu
TechNet Community Support

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Printing dashboard with network printer

Is there any way to send/print the dashboard page to physical network printer? i am having links to HTML print and PDF print. But i want to print with network printer. please give some suggetion.
thanks

Currently there is no out of the box solution. But with some amount of work you can make it very robust by using ibots and BI Publisher Java APIs. You need to basically call the delivery manager API from the ibot. You can pass the output of a dashboard to the API which can print to a local printer. I have an example in my blog entry here http://oraclebizint.wordpress.com/2008/02/01/oracle-bi-ee-101332-calling-bi-publisher-java-apis-from-ibots-storing-reports-in-file-system-using-delivers-and-bi-publisher-scheduler/. Though this talks about storing the reports in a file system, the idea is the same. Instead of a file-system destination use printer as the destination.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Critical Issue with Network

Hi Team,
I have been using Lenovo P780 past one year. From Two months am facing a mojor issue with Network. When am connecting the device with WIFI then after few min. my GSM network goes down even after Turn off the WIFI. After a Hard rebot of the Device also am not able to get any GSM network on my Device. Please help me to resolve this issue. Am expecting more from Lenovo Technical Team.
Note : Am unable to Get GSM network in my P780 Device after using the WIFI.

there was no error occured in AE monitoring as per logs it processed successfully, but receiver party which is outside organization network complained saying that they receive this file empty.
Logs for your reference received by third party:-
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 >>FILE INFO: D:\ftp\kunden\File Name was opened. Sharing is 1. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 Did not receive any data, Error=1506, SubError=0, WSAError=0
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 >>FILE INFO: D:\ftp\kunden\File Name was closed. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 Finishing STOR, Triggering events manager for FX_EVENT_FILE_WRITE_SUCCESS
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 RESPONSE: 226 Closing data connection. Transferred 0 bytes in 1 seconds. 0KB/second.
where in PI we could see message contains data and message has been successfully processed, could it be issue on receiver end?
thanks.

New HH3 - Issues with Kodak Printer and iPhone 3GS

Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...

For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

Communication problem with network printer

I have a Lexmark X9350 all-in-one printer. It has a built in wireless card and I am trying to print to it from my Powerbook G4. I have an airport extreme network setup in my home, and my PC is able to access the printer just fine. When I installed the printer software on the mac, it recognized the printer on the network and worked at first, but then suddenly couldn't find the printer. When I uninstalled and reinstalled the software it was very strange because when I got to the point where it searches the network for a printer, sometimes the printer shows up, and then if I click to refresh the printer sometimes disappears. It is not an issue with being out of range, because the printer display tells me it has plenty of connection, and as I said the PC can print with no problems. It appears to be something specific with Tiger not being able to consistently detect the printer.

I would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.

Illustrator CS2 can't open new file with network printer installed

It seems that with my network printer set up I can't do much with Illustrator, I can't open new files and I can't print without opening up the printer setup menu in Windows.
Photoshop CS btw, I can't open it at all.
I take the network printer offline and everything is fine, except then I don't have a printer.
Windows XP SP2
Illustrator CS2 12.0.1
Any fix for this?
Thanks,
David

Creating a Dummy Generic printer fixed the issues of opening a new file in Illustrator and being able to open PS at all.
However Illustrator is still taking several minutes to print something as simple as a test circle.
The menu I was referring to is Printers & Faxes under control panel, though I realized later that may not have had anything to do with it. It may have simply been coincidental timing. I opened the P&F window about 10 minutes after hitting print and just after opening P&F the print window popped up. It simply may have been taking 10 minutes for the print window to open.
With the network printer set up as the default printer if I try to open Photoshop a window opens but just stays a grey blank screen, no credits box, nothing. Then if after a few minutes I hit ctrl+alt+del it says Photoshop not responding.
What I was doing to take the printer offline was to completely delete the network printer from Printers & Faxes.
I'll see if they have an updated set of drivers, but I think I have the latest ones, as I updated them a month or so ago.
Thanks,
David

Printing issues on network printer (Sharp MX-N700N)

Hi all,
Well my issue is twofold really. Primarily, I need to be able to print to a network printer which is the Sharp MX-M700N. Now it's on a windows network, so I added it to my printer list via it's IP address. So far so good...so now I have the latest driver avaialble from the Sharp consumer website (sharp-usa.com) and what happens is anytime I try to print anything, the job automatically goes on pause. Even if I click resume, it then pauses again immediately.
Now the second part of my issue, is that other people in my office who are also on Macs running 10.5.2 have added this printer via it's IP, but they used an older driver (for version 10.4.x) that was downloaded off of the Sharp service site, accessible only by authorized technicians. Now here's the thing....they can print to it perfectly.
So immediate thought is...use the driver they're using right? Well, when I try to install that driver, it's telling me it can't because a newer version is already installed. I've gone into Macintosh HD > Library > Printers to find the driver to try and delete it, but there's tons of stuff in the Sharp folder there and I'm worried about just randomly deleting files.
Any help would be greatly appreciated! Thanks!

Reading through your post, you may find that the latest driver you have will work, you just might have to ensure you have the correct protocol selected and queue name entered. If you look at one of the other Mac's that is working, you can select the print in the list, select 'Open Print Queue' and then select the Info icon. This will display the General tab and in the lower section next to URI will be the protocol and queue used; ex lpd://ip_address/print.
If you do have the exact settings in your Mac, and you want to look at removing the driver, then check that an uninstaller is not included with the driver installer. I've seen with the Canon copier drivers, you have the option to Uninstall and this removes all the files located in /Library/Printers/Canon/PS. Hopefully you have something the same for the Sharp.
If not, then copy the contents of the Sharp folder to another location and then delete the original folder contents.

Issues with Form printing using a 3rd party software!!!!!!!!!!!!!!!11

Hi All,
We are printing our month end AR statements using Xerox DP100 printers. We are using a SAP Script as the layout form. Everything works perfectly alright when a direct print is issued to the printer. But the scenario here is the statements are sent to a 3rd party software so that the statements can be saved in their repository and made available to be viewed and printed whenever necessary. Now the issue is when this 3rd Party Software(TPS) reads the SAP generated PCL from its report store on the unix host and generates a PDF File that it presents to the web client user for (re)printing via his/her PC it appears that the TPS or Websphere or Adobe is performing a font substituion - replacing the Univers font(used in R/3) which is not loaded on the unix host with a different font(with different sizing and/or behavior).
As a result the horizontal and vertical positioning generated by SAP(which is correct for the Univers font) is 'wrong' for the substituted font. The fixed size fields print OK but gradually move to the right. The varying size amount columns do not align correctly and fall off the right side of the page.
Can anyone give me pointers on what can be done to arrest this error.
Does the font need to be loaded on the unix host or the font used in the form be changed?
Regards,
Karthik

Karthik,
Sap script behaves differently for different printers. You will have to change margins when you change your printer/software accordingly.

Issue with remote printing

Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
Thanks

Hi,
What's the operating system of remote PC we log onto? Here, I am not sure that this can help but we can give a try by disabling the following policy setting:
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection\Use Remote Desktop Easy Print printer driver first
Regarding this point, the following KB article can be referred to for more information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
https://support.microsoft.com/en-us/kb/980056
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Formatting issue with network printer

Similar Messages

Maybe you are looking for