Formatting issues with quoted text in replies

Whenever I reply to a sender, it adds extra leading to the original (quoted) text -- otherwise it seems to keep the other characteristics. How can I fix this? It makes my reply messages really long, and I don't see any solutions in the formatting prefs.

I have a similar problem in that spaces are added between lines of text in the quoted messages when I select "Reply To." I have found no solution, but the problem can be corrected with patience by deleting the added spaces one by one while your response message is in the "Reply To" mode, that is before it is sent.

Similar Messages

Formatting Issues with SO10 text in Adobe forms

Hi Everyone,
I Have the below text maintained in SO10.
"Thank you for choosing Enterprise. We look forward to seeing you at 9:00 am on Monday, November 28, 2011. This message is to confirm you have updated your reservation. Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500 neighborhood locations."
I have created an text module of type include text in Adobe form context. the text which has to be bold is not being displayed as bold and the line space after first paragraph is being skipped out and the 2nd paragraph is being displayed as the continuation of the first. The out put looks as below
"Thank you for choosing Enterprise. We look forward to seeing you at 9:00 am on Monday, November 28, 2011. This message is to confirm you have updated your reservation. Following are the details for the updated reservation: P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500 neighborhood locations."
I tried Styles using SE72 on the SO10 text. And I cannot assign smartform styles on SO10 text in Adobe forms.
Greatly appreciate your suggestions and solutions.
Thanks,
shalini

Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
"<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
November 28, 2011. This message is to confirm you have updated your reservation.
Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
neighborhood locations."
- shalini

Issue with displaying text in BEx

Hi all,
We are facing an issue with displaying text in the query output.
We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
Pls help
Regards,
Suchitra

But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
Nothing will happen to your data.
Its showing there ...dosent that mean its present and activated?
They are present n in active version.
If u change any records they will be in M version..by activating the data...u are converting it to A version.
Regards,
Ram.

Issues with dynamic text box formatting

I'm running into issues with using HTML formatting for a dymanic text field. I know these are quirky and I cannot figure out how to get the formatting proper.
I have on my stage a dynamic text box called "content_txt" inside of a movie clip instance "content_mc". When it enters the frame, I fade the "content_mc" from alpha 0 to 100 using a timeline animation. In order for this to work, I have to embed the font in my "content_txt" text field. However, the only way I get get the HTML formatting to work is if I do not embed the font.
The dymanic text field is set to render as HTML. In my actions layer, I set the text:
this.content_mc.content_txt.htmlText = "<b>Hello world,</b> it is me again."
In summary:
1. If I do not embed the font, the alpha fade does not work but the HTML formatting does.
2. If I embed the font, the alpha fade works but the HTML formatting does not.
How do I resolve this? It's driving me nuts!

How do you embed just one style?
I've tried typing three words in the text field and formatting each (regular, bold, italic) but the text field just defaults to whichever format is first.
Also, I tried embeding the whole character list and did not have success.

FCP and Motion formatting issues with DVCPro 50?

The material is DVCPro 50 NTSC 48khtz. (Item properties indicate that I initially digitized it properly.) My sequence settings are DV50 NTSC 48khtz.
I wanted to create a vignette effect so I exported my clips as a Quicktime (current settings) sequence to Motion. When I was done there I exported the sequence from Motion back to FCP as a DV NTSC movie.
Some of the Motion effected clips will play, look great and then all the sudden I see a black band appear on the East side of the frame. I can stretch it in Motion some but it just degrades the image so I'd rather not.
I'm surely grateful if someone can steer me in the right direction here.

Thanks for the workflow tips and suggestions. I backtracked to my original sequence and found the problem originates there. I have narrow black lines on both sides of all these clips. Since I resized a few clips with moves, I didn't recognize the problem. Now that I'm closer the root of it, any suggestions?
By the way, these problematic clips are intercut with no problem library footage that was also shot on DVCPro 50 and I took in on the same deck.
I cruised the forum for any occurence of a similiar issue and most replies seem to suggest a formatting issue. I don't get it since I think I have everything set up correctly. As a precaution, I also tossed out my preferences using FCP Rescue 5.
Welcome to the discussions, splotch.
Not sure what is causing this, but I might propose an
alternate workflow. Have your clips on the timeline
as you wish, ctrl/right click on them and select
Send To Motion.... Click the
embedded and open Motion ticks, give it a name, then
continue. Do your work in Motion, save, quit, and
fall back into FCP. Your clips may lose their
"anamorphicness" on their round trip, but just
ctrl/right click on the clip and select Item Properties/Format..., then
click on the anamorphic button.
Try this and see if you are still getting the same
problem...
Patrick

Mail formatting issues with 1.1.1 update

With the 1.0.2 firmware HTML-formatted e-mail displayed correctly, if a bit too small to read, just like web pages do. Just like web pages, I could double-tap on - say - a table or a bit of text to zoom in and/or use pinch gestures to zoom in and out.
Now when I look at the same e-mails that looked so good in 1.0.2, my iPhone re-formats and re-flows the e-mails into gibberish, kinda like PocketIE does on Windows Mobile. One e-mail (a hotel registration confirmation) had the header re-flowed into 60 or 70 lines of one character each. The daily status messages I get from my SBS2003 server - which were completly unreadable on my old XV6700 with WM5 - looked great on 1.0.2. With 1.1.1, the tables are scrunched up, many text fields have a second or third line with one or two characters on them, ect.
Anyone else notice this? It's annoying enough that I'm almost willing to give up the other 1.1.1 features to get my mail working right again.

Solved the problem with bit locker (and refresh and reset and a couple of other things that rely on the windows boot manager by reinstalling windows (went to Windows 10). That also solved my issues with high Cpu when playing YouTube videos and photoshop crashes due to the fact that Windows 10 loads the latest Intel drivers.
Unfortunately the issue of Bluetooth mouses freezing still happens, though only twice yesterday, so that's an improvement.

2 Formatting issues with HTML forms

I have a couple of issues that we can't seem to get past with adobe livecycle designer 7.0. We have an internal form, rendered in HTML, that is emailed between departments, and the data entered is stored in an XML file that is created using the code similar to the following:
protected void doPost(HttpServletRequest request,
HttpServletResponse response) throws
ServletException, IOException
oOutput = response.getOutputStream();
try {
FormServerWithXML fsb = new FormServerWithXML();
fsb.processForm(request);
File file = File.createTempFile("Form_", ".tmp", new
File("d:\\xmlFiles"));
BufferedWriter(new FileWriter(file));
out.write(fsb.getXMLString());
out.close();
When we use a numeric field and try to format it with any display pattern containing dollar signs, decimals, etc... the xml data for that field isn't being written to the xml file. All of the other fields are being written properly.
The next issue we're having is that with HTML forms, when we create a multiline text field we are unable to limit the number of characters that are allowed in the field.
I'm pretty new with this, so please send some advice my way if you have any.
Thanks,
Chad

Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
"<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
November 28, 2011. This message is to confirm you have updated your reservation.
Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
neighborhood locations."
- shalini

Issue with document text - converting from PDF to Word

I have used Adobe Reader in the past with no issues. Today, I tried to convert a PDF to a word document. It worked, but the text all changed to wingdings font (even though it says it is Calibri). Any suggestions?

Hi marleighp23001196,
Are you facing this issue with a specific file or with other word files too?
Regards,
Rahul

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Mx.controls.Text zoom issue with wrapped text. Is this a bug?

We have created a diagram drawing tool in Flex, but we are having a serious issue with zooming. Everything zoom fine expect the Text control if it contains wrapped text. At certain zoom levels, some of the text seems to disappear (usually text at the end). I have tried everything, embedding fonts, turning anti-aliasing on and off, setting anti-aliasing to normal or advanced, but it doesn't seem to fix the problem. Is this is a known bug?
If you check out the pictures (see attachments), you will see that the part of the text ('34') disappears at a certain zoom level.
There is another blog who suggest to embed the font and set the antiAliasType to ‘animation’ (http://www.mehtanirav.com/2008/08/20/zooming-text-area-in-flex-messes-up-word-wrap-bug%20), but this doesn't seem to work for me either. I don't know if I am doing this correctly though, but I embedded a font and called text.setStyle("fontAntiAliasType","animation"). However, 'animation' is not one of the AntiAliasType contants. According to the official documentation, the AntiAliasType constants are 'advanced' or 'normal'.
Any help will be appreciated.

Try this:
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
import javax.swing.text.*;
class textpaneColor extends JFrame {
   JTextPane tp = new JTextPane();
   JButton button = new JButton("color");
   public static void main(String args[]) {
      textpaneColor obj = new textpaneColor();
      obj.showMe();
   void showMe() {
      button.addActionListener(new buttonListener());
      setSize(200,200);
      getContentPane().setLayout(new BorderLayout());
      getContentPane().add(tp, BorderLayout.CENTER);
      getContentPane().add(button, BorderLayout.SOUTH);
      setVisible(true);
   class buttonListener implements ActionListener {
      public void actionPerformed(ActionEvent e) {
         SimpleAttributeSet set=new SimpleAttributeSet();
         StyleConstants.setForeground(set,Color.BLUE);
         StyledDocument doc=tp.getStyledDocument();
         doc.setParagraphAttributes(0,999999,set,true);
};o)
V.V.

Formatting issues with "Justify"

I have a problem. I have a text field that ought to be justified and multiple paragraphs or a list of items will be entered into the text field.
However, it appears the last line of each Justified (flush left and right) paragraph is spread across the text field, resulting in a very ugle display in the PDF (see below).
Are there any known work arounds for this? Do I have an issue with my settings? Is this a bug?
Any help or insight would be appreciated.
Thanks, Mike

Hi Prash,
Throw this into a text object at the bottom of your dashboard and check the enable HTML option.
It'll left justify ONLY the view selector drop down box.
Cheers!
-Joe
<script type="text/javascript">
var leftJustifyVSelector = function (debug,align){
     if (debug === 1) { document.write("Begining leftJustifyVSelector function"+"<BR>");}
     // Get all view selector objects
     var vselectors = document.getElementsByTagName('td');
     if (debug === 1) { document.write("Get the TD elements"+"<BR>");}
     if( vselectors == null){
          // Couldn't find a view selector
          if (debug === 1) { document.write("No view selectors available"+"<BR>");}
          return;
     // Otherwise loop through them and align them to the left
     if (debug === 1) { document.write("Looping over the view selects"+"<BR>");}
     for ( var view =0; view < vselectors.length; view++){
          // check if this is not a view select class TD element
          if ( vselectors\[view\].className == null ||
               vselectors\[view\].className == undefined ||
               (vselectors\[view\].className != "VSelSelector")){
               // Not a view select TD
               if (debug === 1) { document.write("Not a view selector TD. Continue."+"<BR>");}
               continue;
          // We must have found a view selector change the alignment property
          vselectors\[view\].align=align;
          if (debug === 1) { document.write("Done setting the align property to left"+"<BR>");}
leftJustifyVSelector(0,"left");
</script>

Reply with quoted text - won't allow me to embed comments in quoted text

I want to reply but put my comments within the quoted email message. I have done this a lot, but just this evening on any email, when I try to embed a comment into the quoted text, up comes a lined box with an x in the upper left corner. Mail seems to be making the quoted text into an image. This used to work, even earlier today. Where did this behavior change come from and how do I change it back to the way it used to be? Thanks

I have exactly the same problem. I see several people have brought it up in this forum but no one has answered. What is the solution? When this happens I can't reply properly to a message. It seems to happen at random.
Please help!!!

Issues with sent texts

My text messages are breaking up making it unreadable by those who I send my messages to. Anyone have any suggestions of what I could do? Other iPhone users who are my friends have reported the same issues with my messages, howevery their messages aren't affected.
Thanks!

Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If Messages is activated but not sending texts, try Settings>Messages>Show subject field>Off.

Book Module format issue with Blurb

I uploaded a book to Blurb with two separate 2 page spreads filled with one photo across the two pages. This first photo appears mismatched with the right side being slightly smaller than the left side. The second photo appears with properly matched sizes.
When I export the book as a PDF both images are cooreclty sized and aligned. Have tried my book creation & upload on windows 32 bit and windows 64 bit. Same results.
Is there any solution to this glitch or some sort of work around?

trshaner wrote:
Essentially there is only one Blurb.icc file and its paper type agnostic.
No such thing really. Profiles must take paper into account. Like you, I have that swatch book and measured each. They are all over the map in terms of their measured values for paper and worse, OABs. One size doesn't fit all but can if you don't mind suboptimal to really poor results!
My guess is that the single Blurb.icc profile is actually the Blurb Standard paper profile.
It isn't even a blurb standard paper profile, it's based on GRACoL which I'm fairly certainly isn't what they are producing on all those papers given the standards. What they are doing is supplying a profile for soft proofing that has no bearing on the output to make those who feel they kind of, sort of understand color management and want to soft proof feel better. If you owned an Epson printer and output to Luster paper, how would supplying a profile for that printer but based on Matt work out? Not well. This is akin to the silly photo lab, RGB workflow where you are given an output profile you can't use and told to send sRGB. Rather pointless but if it makes the user feel that by soft proofing they've done something useful, better than a sharp stick in the eye.
Based on sending the same images to differing vendors who produce books using Indigo (at least for the inside of the book), Blurb is far from best in class in my experience. And for B&W, on top of all the issues I've outlined, even the best shop is going to have issues with the Indigo screening which produces crossover in terms of color over the press sheet. That alone is a problem unless HP has updated their screening as they have promised for some time. Dead nuts neutral is hard to do!

Issue with Full-Text (FTS) master merge on SQL Server 2012 SP2

Hi,
On my current project we have really annoying issue with master merge process that occurs after Full Population of FTS Index.
Let me describe our process: we have continuous build that setup environment and run unit tests after each commit in our source control. For each run we create new DB (on the same SQL Server) then fill it with test data and run unit tests. Sometimes unit
tests failed because FTS Index population cannot finish in time.
We have constantly seeing in [sysprocesses] table lots of sessions with wait type FT_MASTER_MERGE that block our tests
In FTS log we have following error:
The master merge started at the end of the full crawl of table or indexed view [TABLENAME] failed with HRESULT = '0x80000049'. Database ID is '45', table id is
706101556, catalog ID: 5.
Here is an example of how we create FTS catalog and add table to it (As you can see it's created with auto change tracking together with
index update in background):
-- Create FTS catalog
EXEC sp_fulltext_catalog 'WilcoFTSCatalog', 'create'EXEC sp_fulltext_table 'Users', 'create', 'WilcoFTSCatalog', 'PK_Users'
EXEC sp_fulltext_column 'Users', 'UserId', 'add'
EXEC sp_fulltext_column 'Users', 'Name', 'add'
EXEC sp_fulltext_table 'Users', 'activate'
EXEC sp_fulltext_table 'Users', 'start_change_tracking'
EXEC sp_fulltext_table 'Users', 'start_background_updateindex'
Does anybody know what is the root cause of this issue and what should be done to avoid it?
Thank you in advance,
Olena Smoliak

Hi,
On my current project we have really annoying issue with master merge process that occurs after Full Population of FTS Index.
Let me describe our process: we have continuous build that setup environment and run unit tests after each commit in our source control. For each run we create new DB (on the same SQL Server) then fill it with test data and run unit tests. Sometimes unit
tests failed because FTS Index population cannot finish in time.
We have constantly seeing in [sysprocesses] table lots of sessions with wait type FT_MASTER_MERGE that block our tests
In FTS log we have following error:
The master merge started at the end of the full crawl of table or indexed view [TABLENAME] failed with HRESULT = '0x80000049'. Database ID is '45', table id is
706101556, catalog ID: 5.
Here is an example of how we create FTS catalog and add table to it (As you can see it's created with auto change tracking together with
index update in background):
-- Create FTS catalog
EXEC sp_fulltext_catalog 'WilcoFTSCatalog', 'create'EXEC sp_fulltext_table 'Users', 'create', 'WilcoFTSCatalog', 'PK_Users'
EXEC sp_fulltext_column 'Users', 'UserId', 'add'
EXEC sp_fulltext_column 'Users', 'Name', 'add'
EXEC sp_fulltext_table 'Users', 'activate'
EXEC sp_fulltext_table 'Users', 'start_change_tracking'
EXEC sp_fulltext_table 'Users', 'start_background_updateindex'
Does anybody know what is the root cause of this issue and what should be done to avoid it?
Thank you in advance,
Olena Smoliak

Formatting issues with quoted text in replies

Similar Messages

Maybe you are looking for