Formatting LaCie External Hard Drive for MAC and PC

Hi,
I just recently purchased a LaCie 500 GB Hard Drive from the Apple Store in order to back up and store most of my PC (Window) files. Most of my files that I need to back up are on CD, DVD, and USB mini drives. I was thinking of transferring the files through my MacBook Pro but I'm not sure how to partition the hard drive, since most of my files are generated from PC's and I would need to connect the hard drive to a PC in the future anyway.
From what I understand, the files that I save in the Windows partition will only be recognized when on a PC, and the same for the MAC. But what about simple compatible files that are read cross platform, such as Word documents? Would I still only be able to access each file depending on the platform and the partition?
Is there a way that I can just partition it into a single storage space – as how servers store data, regardless of whether it’s a PC or MAC file? I’m also wondering what would happen if I were to plug it into my laptop first? If it doesn’t ask me to partition the drive on my PC, will it ask me when I plug it back into the MAC afterwards? And if I partition it then, what would happen to my data?
Any help would be greatly appreciated!
Thank you

Hi, njoay
I just moved to Mac from Windows last week onto a new MBP. I purchased a Lacie 500GB ruggedized drive. Here is what I know and tried:
1) If you format the Lacie in Mac format, then you can't use it on a Windows machine without software eg MacDrive.
2) If you format the Lacie in NTFS, you can only read from it when connected to Mac without other software.
I work a lot with VMWare, so I need the LACIE to be able to connect to both PC and MAC. I found a solution from another MAC user: "Paragon NTFS for Mac OS" (see http://www.paragon-software.com/home/ntfs-mac/) which you can purchase for US$39.
This is what I did:
1) connect my Lacie to my PC and formatted it in NTFS format.
2) Installed Paragon NTFS onto my MAC
3) Connected LACIE to Mac.
Here are the results:
1) Connection with USB2.0 from Lacie to Mac - it works (can read and write to LAcie formatted in NTFS)
2) Connection with Firewire 800 from Lacie to Mac - it does NOT work. The disk gets ejected. I have logged a support call with Paragon on this issue and am waiting a reply.
3) Connection with Firewire 400 from Lacie to Mac - have not tried it yet.
Hope the above helps.

Similar Messages

Formatting an external hard drive for Mac and Windows

Hello,
I just bought a brand new Seagate Expansion Desktop Drive (2TB) and am trying to work out how to format it. I want to move all my photos and movies to it from my laptop so i have more space. I have a Mac OS X 10.5.8 laptop but i also wanted to make sure it was compatible with other Windows computers in case i need to use it on someone else's PC.
I've read through a few posts over the net and i am getting confused as i'm not IT-intelligent at all. I've seen there are possibly 4 different format types.
Any help would be much appreciated.
Thank you!

Answered here: Formatting brand new external hard drive

Same External Hard Drive for Mac and PC?

Hello,
I just bought an iMac and a Lacie external hard drive. I plan to format the Lacie for the Mac. However I'd like to use it to tranfer my files from the PC. Will the Mac formatted Lacie External Drive work with both the iMac and the PC?
Thanks!
Jim

Another alternative is to get a Lacie drive and use it native to MAC. To acess read/ write capacity to your NTFS partitions refer to my post in:
http://discussions.apple.com/thread.jspa?threadID=1425010&tstart=0
regards,

How to format an external hard drive for vista and snow leopard?

I want to format an external hard drive to attach to Airport Extreme base station to us with Snow Leopard and a PC with Vista. What format should I use for read/write access for both?

I use NTFS for my external drives being used on both Macs and Windows. To get the Mac to write to NTFS, you need a separate program. I use Paragon for Mac software. It works behind the scenes. There are also some free things that do the same thing but I found them cranky and unreliable. YMMV.
Windows can not read any of the Mac disk formats without additional software.. FAT32 is fine but is extremely limited.
For the last year, I have had absolutely no problems on any computer, Mac or Windows.

I want to format a Seagate Expansion External Hard Drive for Mac and PC

I ordered a Seagate Expansion 2 TB USB 3.0 Desktop External Hard Drive to use with my new Mac and my old PC (or at least get my photos off of both and put them on the drive). I thought all HDs could be formatted to use by both, I was able to get a Mac HD to work with my PC in 2008 (but it died). I am reading that this drive is PC only. I have Parallels and Windows 8 on my Mac if worse comes to worse but I would like all of my computers, real, virtual old and new to be able to access the external drive. Has anyone encountered this issue before? What should I format it in? FAT32? If yes, how would I go about that on a Mac. Or should I just return it?
I'm kind of Mac clueless. I spent my childhood through college on a Mac but I graduated right when OSX came around and I don't know how to work with the Mac "under the hood" like I did with OS9 and with Windows. So please talk to me like I am an an adult idiot.
Thanks!!!!

The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT.

Formatting external hard drive for MAC and Windows

I have an external hard drive that I would like to make compatible with BOTH Mac and Windows. I don't want to split it but is there any way that I can make it compatible to where I can use it back and forth between both? I have classes and use Photoshop on both systems and need to be able to read and write to the hard drive from each system. Please let me know if this is possible and how? Thanks

I have a 500GB external HDD which I had to format o Fat32 a while ago. I don't remember exactly how I did it, but I remember it was a pain in the *** and took forever (I was under Windows XP).
So short answer to your question is yes. It is possible and as the above person said, you need to format to Fat32. Long answer is it will take some time and effort. Here are a few links to help you get started:
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
http://macosx.com/forums/mac-os-x-system-mac-software/270038-format-new-hard-dis k-into-fat32.html
http://en.kioskea.net/faq/sujet-676-formatting-your-drive-with-fat32
I haven't tried any of these (I believe I formatted mine downloading a third party app), but you might be lucky. Good luck.

External hard drive for Mac and Windows?

Hey all,
Is it possible to set up an external hard drive with a partition that has one side compatible with Mac and the other with Windows, similar to a Boot Camp setup on an internal drive? If so, how do I do that? Thanks for any advice you can give.

Rekishika:
Yes it is possible. Use Disk Utility from Leopard and partition the external drive to the desired space for each. Format one side with Mac HFS+ Journaled and the other with FAT32 (You can reformat the FAT32). You can also format both external partitions to FAT32 if you want Leopard and Windows to access (read and write)either one of them.
Axel F.

Partitioning an external hard drive for Mac and PC

I want to partition an external hard drive (3TB) into 3 even partitions. I want to use one for PC storage, one for Mac storage and the last for Mac backup. Is this possible and how do I do it?

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Re-partition the drive to create the three partitions. The one you wish to use on a PC you should format MSDOS (FAT).
When you connect the drive to your PC it should have no problem reading the partition set up for a PC. Now while on the PC you may wish to consider reformatting that partition using ExFAT (if supported on your PC.) This format is more compatible with both OS X and NTSF supporting long file names and other FAT filesystem irregularities.

External Hard Drive for Mac AND PC

I need to purchase an external Hard Drive to be able to back up both my iMac and my partner's PC. I am currently looking at buying either:
Iomega UltraMax Hard Drive 500GB FireWire 400/USB 2.0
OR
Iomega 500GB Minimax Hard Drive with Dual Interface + USB/FireWire Hub
Can anyone tell me is it possible to format either of these Drives to be able to accept both Mac and PC, and if so, do either of these drives let you have a permanent connection to both at the same time, so they can be set up and left to do their backups automatically without always swapping cables over etc.
Does anyone have a preference between these drives?
(Oh, and for info, I won't be using Time Capsule as I only have 10.3.9!)
Thanks

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

I cannot find the best way to format an external hard drive for MAC, PC, TV?

Hello,
I have a problem: I want to use an external hard drive on my Mac as well as on a PC and a TV. The normal structure of Mac (Journaled) isn't supported by PC/ TV. I changed the structue into DOS(FAT) on my Mac. That's suppoerted by TV and PC. But I'll use the hard drive for storage of HD films so I'm afraid that the structure is not good enough for this (it seems old to me DOS.....) And I don't want the quality to be influenced by a bad structure.
Then I've formatted into NTFS on my PC, but then I cannot put files from Mac on the hard drive.
What is the best solution?
Hope someone can help me!
Regards, Kim

FAT works great, but the problem is that it's old and that you can't store files that are bigger than 4 GB. In this case, you have exFAT, a filesystem compatible with OS X and Windows, but I don't think that the TV will read it.
If you want to use NTFS, you need a third-party application to be able to write in it on OS X, like Paragon NTFS

Formatting an external hard drive for mac.

Hi- I just bought a SimpleTech Pro 1TB External hard drive from Best Buy. I already own about 4 other external hard drives of various brands (WD, Maxtor, Seagate, Etc.). If I remember correctly, in the past to format those drives for OSX, I've just gone into disk utility, selected the drive on the left, and went to the erase tab, chose volume format: Mac OS Extended, named it, clicked erase and a few minutes later my drive was ready for use. For some reason now I am getting an error (format failed) shortly after I click erase. It will allow me to choose fat32 to format the drive, but whenever I try for a Mac OS format I get this same error. Any ideas?
By the way, I tried this on a Seagate drive yesterday and the same thing happened. So I returned it thinking it wouldn't work with a mac. So I don't think it's the drive.

Choose partition and GUID in option and after format in HFS+
Message was edited by: Nardac

Formatting external Hard Drive for Mac and PC Access

I have a USB External HD by Seagate that I want to add to my Airport Extreme BS that creates my LAN for a Mac PB, WinXP laptop and HP OfficeJet printer. The disk is currently formatted as NTFS and I don't think a Mac can read that. My HD manufacturer (Seagate) told me 1) FAT32 is unstable for PC and/or Mac usage and 2) my 300GB Pushbutton HD (3 years old) "will not work" on a LAN.
I think both issues are BS as they now have the Maxtor "network HDs" to sell. Any truth to this??
Second question: Seagate forums suggested that I format HD to FAT32 or Mac format and then buy "MacDrive" software so the PC can read/write to the drive. Same question: BS or truth.

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

Formatting an external hard drive for Mac/Time Machine.

Hello-
Just purchased a Time Capsule to use both as a wireless Network and backup hard drive. Both are working great. However, I have an external hd (500 gig "My Book") I used with a previous computer (PC). I would like Time Capsule/Time Machine to backup everything on the My Book external hd but I realize I need to reformat in order to have the Time Machine backup this drive. It appears that the only way to reformat the external hd is to erase it's contents. This isn't an option for me as this drive is almost full and has a ton of data I do not want to lose. Can anyone elaborate on how I can reformat this disk so it will be compatible with my new setup without losing any of it's contents? Thank you for your time and help.
Matt

Some 3rd-party apps, such as iPartition, claim to be able to do that. But they +*very prominently+* warn you to back up first, in case something goes wrong. And there have been a few posts here where something did go wrong and the user hadn't backed-up, so lost everything.
iPartition (and I think all the others) cost money, of course. Instead of spending it there, your best bet is to get another external HD, a larger one. Copy the data to it, reformat the WD, and copy it back. Make sure Time Machine is backing-it up to your Time Capsule (ie., not listed in the exclusions box of +Time Machine Preferences > Options).+
Then erase and partition the new one. One partition should be at least as large as your Mac's internal HD, the other 500 GB or more. Use this drive for "secondary" backups of both, via CarbonCopyCloner or SuperDuper. [CarbonCopyCloner|http://www.bombich.com> is donationware; [SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling.
You might even want to get a portable HD for this, so you can take it off-site and also be protected against fire, flood, theft, direct lightning strike on your power lines, etc.

Formatting An External Hard Drive For Windows And Mac

So here is the problem I'm running into. I have a 160GB external HD Passport from Western Digital. When I format it for the Mac, it won't show up on my Windows XP computer at work. If I don format it in Disk Utility as FAT, it won't allow me to transfer large files in OSX.
Is there a way I can get the best of both worlds?

An interesting & refreshingly honest comment (from the author?) about SL-NTFS at http://mac.brothersoft.com/sl-ntfs.html:
"Any encountered problem come from the Apple driver and not from the Preference. If you often need to write on NTFS disk, I recommend you to look for a better solution."
The story behind the story: NTFS is a proprietary file system owned by Microsoft, which doesn't make all its characteristics known to outside developers. Thus, all methods of writing to it rely at least in part on reverse engineering unless they are provided as a part of Windows itself. I'm not entirely sure what the comments about Snow Leopard having this by default disabled capability actually mean, but both the above quote & the fact that it isn't enabled in Snow Leopard as shipped make me wonder how prudent it is to rely on it for routinely saving important data.

When I try to format an external hard drive for Mac it keeps coming up as 'error'. Can anyone help me?

I've followed the instructions on the online tutorial but when it is trying to erase the data it comes up with 'volume erase failed, could not unmount disk'.

FAT works great, but the problem is that it's old and that you can't store files that are bigger than 4 GB. In this case, you have exFAT, a filesystem compatible with OS X and Windows, but I don't think that the TV will read it.
If you want to use NTFS, you need a third-party application to be able to write in it on OS X, like Paragon NTFS

Formatting LaCie External Hard Drive for MAC and PC

Similar Messages

Maybe you are looking for