Formatting MDX report,Error=One or more axes in MDX query have been skipped
Hi All
Need to show the measures on row-ways instead of Column-ways in MDX report. Able to generate report with measures Column-ways.
Getting error when tried the following:
#) when used "{} On Rows" instead of "{} On COlumns".
ERROR - 1200545 - One or more axes in MDX query have been skipped.
ERROR - 1241101 - Unexpected Essbase error 1200545.
If anyone faced something like this before, please share some work-around.
Thanks & Regards
sharma
Hi,
Take a look at this SAP Note: 1580524 - Xcelsius Dashboard does not display variable popup
Also go through the below discussion, it may help you.
Bex Variable PopUp does not come up launching Xcelsius dashboard
One or more mandatory variables of query XXX no... | SCN
Bex Variable PopUp does not come up launching Xcelsius dashboard
BICS - Passing Mandatory Filter Variable value to a BEx Query
Passing parameters between XCelsius dashboards using BI direct connection
Hope this helps brother.
Regards,
Suman T
Similar Messages
-
I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELPGet a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I cant send pic messages to iphone users. I get the error message: "one or more of the message components have been delted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset". This only seems to be an issue to iphones. I like this phone but have had nothing but trouble since day one. I am so tired of being on the phone with verizon and still not getting all the problems corrected. Someone please help!
Hello christina267,
Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport -
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
Here is the total error message:
"Because a USB devce was drawing too much power from your computer, one
or more of your USB devices have been disabled.
To prevent damaging your computer, the USB device drawing too much
power has been disabled. Other devices may have also been disabled.
When you disconnect the device drawing too much power, your other USB
devices will be enabled again."
Now in contrast to every other thread on this i get this error message eveytime i connect my soundcard (interface). Not when i start up the mac or anything, just when i connect the sound card. (the soundcard does not have its own power source but note that this has never happened before and i have had this soundcard for about a year!)
It deactivates so i cannot use it.
I have tried:
Connecting the soundcard to my mothers mac -> it worked!
Connecting an external harddrive to my mac -> it worked!
so basically, i can't be the soundcard or the cable and it cannot be the mac USB port?
I don't know what to do! i really need this to work! anyone got an idea??Hi, ryankeenanrk.
Thank you for visiting Apple Support Communities.
I would recommend trying the steps in both articles below and test the results.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
Jason H. -
Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!
I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!
-
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive. -
I keep getting this mesage : Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
I need to charge my phone but it's not letting me!! Please help!Solution may be found if you search in the "More Like This" section over in the right column and in the article - http://support.apple.com/kb/HT1151.
-
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled?
What do I do?Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use. One symptom of a bad Lightning cable is the message you are getting.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.
-
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?
Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3 -
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.
update to the above (my edit has disappeared !)
This appears to be a problem with the USB cable. I can make this message happen during a sync with itunes. If i lift the cable with my finger about a cm away from the join between the cable and the USB connector head of the cable I get this warning message each time I try. I must have a loose wire/connection in the cable.
Thanks
Maybe you are looking for
-
On final attempt to unlock phone, don't want my info wiped
I had a password to lock my phone, although at the time I created my blackberry account and linked my email last night it was not enabled. I created a different password to open my blackberry account. Then picked up the phone later and tried to unlo
-
CIF Queues lie with ready or sunning status.
Hi Experts, We are experiencing that CIF queus are lieing in ready or running status for some of the order types - not all. We use inbound setting. Inbound to SCM sales orders and deliveries lieing like this. And inbound to ECC production orders are
-
List out all synntax errors pf report at a go
Hi all, I have a requirement to copy the entire customised report from 4.6 system to ECC 6.0 and to clear all the syntax errors. In ECC6,there are no customised objects which are in 4.6 system. So, in syntax check, I am finding only one error at
-
Hi All We have cost based copa active. I want to develop report in co-pa where i want to plot profitability of varies Sales Offices for specific period for specific material. Example Selection criteria Material Region Sales Office from Sales Office T
-
Using Set-VMReplication -EnableWriteOrderPreservationAcrossDisks but getting a warning
When I run the following powershell command I get the following warning and the action is not successful? Can anyone help out with this? Set-VMReplication -VMName server123 -EnableWriteOrderPreservationAcrossDisks 1 WARNING: 'EnableWriteOrderPreser