Formatting of workitem text

Hi,
while sending the workitem to SAP inbox,i am sending the approver hierachy list with the position and status
like
Manager->Name1->approved
vice president->name2->waiting for approval
I want this text has to be foramtted
Manager--name1--
approved
vice president--name2--
waiting for approval
while testing in method the formatting is working fime.
But when it comes to SAP inbox,format looks something diffrent

Hi,
I think it wouldn't hurt to elaborate a bit more on how it is different, don't you think?
I would start checking the formatting of the workitemtext in the task definition. I'm guessing you will find the answer to your question there.
Kind regards, Rob Dielemans

Similar Messages

Export to excel with formatting was autowrapping text in a cell

Export to excel with formatting was autowrapping text in a cell without having to check the can grow option. When the can grow option is checked it does wrap the text however it spans multiple rows, which causes complications when trying to sort.
It worked in:
ProductVersion=10.0.0.533
ProductName=Crystal Enterprise 10 Embedded
Doesnt work in:
Crystal Reports 10.0 Service Pack 6
After the upgrade the reports did not autowrap, b/c the "can grow" option was not checked. I believe this was fixed by "ADAPT00305137 Patch ID: 36479914
Description:
When users export to Excel 97-2000 with the page-based format, text fields are wrapped, even when the "can grow" feature in the
Designer is turned off." . After we turn the option to grow on it does wrap however it spans across multiple rows. So I guess my question is there a way for it not to span multiple rows when wrapping text?
Edited by: dforde on Jan 27, 2010 11:12 PM

I could be wrong, but I believe the export to excel option exports the database values, and the export to HTML exports the values seen in the sheets. If the database values are stored as seconds, the Excel will see them as seconds, and the data will have to be formatted properly in Excel.
I haven't toyed around with Excel exports that much, but it might be possible to set up a template or macro in excel that would have the proper formatting, and use it when opening the Disco export.

How to use multiple patterns for masking/format the input text

Hi All,
I am using Jdeveloper 11.1.1.5 and i have a requirement where i need to format my input Text value in these below patterns:-
Format
Example
AA9A 9AA
EC1A 1BB
A9A 9AA
W1A 1HQ
A9 9AA
M1 1AA
B33 8TH
A99 9AA
AA9 9AA
CR2 6XH
DN55 1PT
AA99 9AA
For Example :- If user puts value as EC1A1BB, it should automatically changed to EC1A 1BB
if user puts value as W1A1HQ, it should be automatically changed to W1A 1HQ and so on..
If it could have been one format , i might have followed this :- https://blogs.oracle.com/jdevotnharvest/entry/get_social_security_numbers_right
But for multiple patterns i am not able to get through to the proper solution.
Is there any way to achieve this ? Please suggest.
Regards,
Shah

For the validation you should be able to use one regular expression where you add the logical or (|) (check the doc http://docs.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html) between the groups. If none of the patterns matches you have an error.
For the for formatting I'm not sure you can use only one expression.
I suggest to write one method which does the checking on and the formatting may be using an array of patterns to check and iterate the patterns in a loop. Once you found a match you can read the needed format from another array (or an other dimension if you prefer to use a multidimensional array).
Timo

IPhoto sends emails in Rich format even if the default format is Plain Text

Detailed Summary (wouldn't fit in the Topic Subject):
iPhoto will always send emails in Rich Text format even if Mail application is set to send all emails in Plain Text format. In other words, emails initiated from iPhoto ignore the selected Message Format setting in the Mail application.
Description:
It is a better practice to email photos in the Plain Text format instead of Rich Text format so recipients using different email clients can easily download attached pictures as regular attached files.
The workaround is to change the email format to Plain Text before sending it. This wouldn't be such a problem if you could make this a permanent setting however this is not possible. The Mail application has a specific setting for this but iPhoto simply ignores it. This is the issue I am raising here.
How to reproduce the problem:
1. Open the Mail application (Assuming you already have an email account configured)
2. Go to Preferences, Composing tab
3. Change Message Format to "Plain Text"
4. Optional step to verify that the Plain Text is now the default format: Start a new email. Click on menu Format and you'll see "Make Rich Text" available, which means the current email is in fact in Text Format. Close this email.
5. Open iPhoto
6. Select one or more photos and click on the "Email" icon on the lower right hand side
7. A details popup will open, click on "Compose Message"
8. The Mail application will open as well as a New Email window with the Subject field filled out and the selected photos in the email body
9. Click on the menu Format
Expected: Th last option should be "Make Rich Text" indicating that the current email is in Plain Text format as determined by the Mail settings (steps 1-5 above)
Actual: Last option is "Make Plain Text" which means the current email is fact in the Rich Text format which does not match the Mail application settings.
Can we at least get an acknowledgement from Apple that this is a known issue? Also, is there a fix for this? It is not an acceptable solution to tell users to manually select Plain Text for every email. I am tired of asking people to resend emails that way. That is a workaround, not a solution.
Test details:
- Mail Version 4.4 (1082)
- iPhoto Version 8.1.2 (424)
- OSX Version 10.6.5

iPhoto menu -> Provide iPhoto Feedback to report a bug.
Can we at least get an acknowledgement from Apple that this is a known issue?
Need to ask Apple that one.
Regards
TD

Using formats of SO10 text in Adobe forms

Hello guys,
I got a question concerning the interaction of SO10 texts with adobe form text fields.
I know there are some threads about it here, and I think I understand the default SAP behavior, but can you please confirm if I am right? Then I got a special question about one case.
So is it right that there is only the difference between formatting the textfield itself in adobe form layout and adding a style to the text field in form context?
This means:
(1) Whenever in my text field in form context no style is added, the adobe form will take the formatting like it is done in the adobe form layout? This would mean that every format which is entered in the SO10 text is insignificant for the adobe form?
(2) Whenever in my text field a style is added, SAP will use SO10 text formats? This means, SAP searches for the smartforms style which is entered in the textfield and uses the formats from SO10 text like they were defined in the smartforms style?
Is this correct so far?
Now the special questions:
(1) What happens if a style is added, but the style does not exist as smartforms style. Which font etc. will be used then?
(2) What happens if a style is added, but the format of SO10 text does not exist in the smartform style?
In both cases it looks like SAP takes some "default" style, but where does it come from?
Thanks a lot!
Regards
Michael

Thanks Rakhi, but that did not resolve my issue. Below is new out as per the thread suggestion and this is not what I wanted.:
"<H>Thank you for choosing Enterprise.</> We look forward to seeing you at 9:00 am on Monday,
November 28, 2011. This message is to confirm you have updated your reservation.
Following are the details for the updated reservation:
P.S. Remember us when you're renting in town. Enterprise is always nearby at more than 6,500
neighborhood locations."
- shalini

Problem in formatting of long text -- line break not recognized.

Hi ,
We have a PO smartform in our SRM system and we are facing problem with formatting of long text on the smartform for long texts maintained for the PO.
for ex, we maintain the long text as --
"this is long text for item 1.
1. this is line 1.
2. this is line 2."
On the smartform it is displayed as --
this is long text for item 1. 1. this is line 1. 2. this is line 2.
So basically, the line breaks in the text are not considered in the smartform .
Any suggestions on how to fix this issue ??
Thanks.

Hello Harmeet,
Which Std. FM are you using to fetch the PO texts? If the PO doesn't exist in your system, i'm afraid you cannot use Include Texts as mentioned by Harsh.
As an alternative you'll have to create a table & pass the text lines to it! I don't think SmartForms are not smart enough to identify new-line character.
BR,
Suhas

Idoc is recieved as xml format instead of text format

hi i am new to XI , I am right now i am trying with Idoc to file scenario
i am sending idoc from an R/3 system and i am receiving it as file in another R/3 system. In accordance to that i have designed & configured all settings, But when i am sending idoc thru my communication channel i am able view a '" *.txt " file with all my necessary details in xml format instead of text format.
desin details
my source and target fields are
FLCUSTOMER_CREATEFROMDATA idoc to the file which as the only few important fields of idoc.
configuration details
in communication cahnnel :
adapter type : file
message protocol: file
processing parameters:
constructution mode : create
file type : binary
advance mode
row.fieldNames : with its fields seperated buy comma
row.fieldSeparator : ,
row.endSeparator : 'nl'
i stuked up with this level for the past 10 days ur valuble suggestion will help me lot to reach my target
Regards
saravanakumar P.K.

You have selected the wrong message protocol: to get an file not XML you should select File Content converion as message protocol
change it to folowing
configuration details
in communication cahnnel :
adapter type : file
message protocol: file content conversion
processing parameters:
constructution mode : create
file type : binary
advance mode
row.fieldNames : with its fields seperated buy comma dnt use this
row.fieldSeparator : ,
row.endSeparator : 'nl'
specify only field sepratator and endseparator dnt have to specify fielnames for receiver adapter in contant conversion.

Program exit to change workitem text

Hi All,
I have a requirement to change work item text at runtime, i am using program exit to change the task contrainer variable which is being used to display work item text. i have written a code in program exit to update container element, but it's not reflected to change workitem text, when i check in ln workflow log the variable shows with updated value.
Please help to solve issue.
Many thanks,

Hi Gupta,
I used below code to update container element.
CASE im_event_name.
     WHEN swfco_event_after_creation.
        CLEAR l_value.
       CALL METHOD l_wi_cont->get
         EXPORTING
           name = 'LV_WITEXT'
         IMPORTING
           value = l_value.
         REPLACE '$' INTO l_value WITH lv_id.
       CALL METHOD l_wi_cont->set
         EXPORTING
           name = 'LV_WITEXT'
           value = l_value.
With above code LV_WITEXT is updated with new value, but same is not displayed as workitem text in inbox.
After workitem displayed in inbox if i use FM SWL_REFRESH_WORKITEM_TEXT explicitly to refresh, workitem text getting refreshed.
Many thanks.

Task name appears instead of workitem text

Hi,
I have a dialog task. Whn I test the WF frm my system, I am getting the workitem text specified for the task in PFTC and its working fine. but when i test the same workflow in another system with the same user id & pwd, i am not getting the workitem text. Instead the task name is displayed in the inbox.
Any settings needs to be checked? Plz let me know.
Thanks,
Sivagami

Hi, thr was no translated text maintained for the workitem text .the prob is solved.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.? I want to alter the formatting (i.e., text and/or cell background color), but not cell content.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.?
I want to alter the formatting (i.e., text and/or cell background color), but not the content, of the target cell(s).

Hi Tom,
Your LOOKUP formula will return a value that it finds in the "other" table. That value can be used in conditional highlighting rules. (Numbers 3 calls it conditional highlighting, not conditional formatting. Just to keep us awake, I guess, but it works the same).
Please explain what you are trying to do.
Regards,
Ian.

Characters in workitem text

Hi Experts,
have an SRM WF triggering, approver is German. He receives workitem in German translation.
Issue:
a) the workitem text has few junk characters in the beginning of the text and end. Inbetween the text is properly translated in German.
What could be the reason?
SRM version is 5.0 and Support pack is SAPKB70009.
Thanks,
Aditya

Hi,
Please logon system in German and check the workitem text in PFTC_DIS transaction.
If the static text is not garbled, I think it is some dynamic container value. In that case please check your system is Unicode or Non-Unicode.
Regards,
Masa

Lost format after using text editing tool

Using Acrobat 9 Pro and the text editor on a scanned document. The edit works fine but when I save the altered file I lose the page format. The text has unwanted spaces and changes in the indentation. What am I doing wrong?

Probably nothing is wrong, other than your assumption that Acrobat is an editor. The editing it can do is very limited and is not recommended if it can be avoided. You might find it easier to save the OCR'd document to a DOC file and work on that, though you will probably have to fix the formatting and such.

Format/hyperlink certain text in the conversation window using an API plugin

Hi, I want to format/hyperlink certain text and make it clickable in the conversation window of Lync. The click itself will execute a Desktop application.
Is this possible via an API plugin and is there example code on how to manipulate the conversation window?
Thanks!

Hi wyatt biker,
To ensure you get better support, I suggest you turn to our Lync Development forum for dedicated support.
With the assistance provided there, it is more likely the issue can be resolved. Sorry for any inconvenience this caused. Thanks for your understanding.
Best regards,
Eric

Change only the format of similar text?

Hi All,
I am trying to change the formatting of similar text.
e.g.
I have R-6-6 (more like this where the number change) that is light and I want to make it regular.
I want to change all similat items aswell, so R-4-11 and R-5-3 and so on.
I thought wildcards would do it but it doesn't. Atleast I am not getting it to work.
Thanks.
Kevin J

OK, that doesn't match the example above. if you are going to have single or multiple digits in both positions you can use \b\u-\d+-\d+ this will find any uppercase-hyphen-one or moredigits-hyphen-one or more digits string with a space or line break in front of it.

Regarding Date format in output text file

Hi Frnds,
i am taking the data from vbak table into one internal table T_vbak, in that i am having vdatu field also, and after that using GUI_Download function module i am downloading that internal table data to one text file into presentation server.
But the date format is displaying in yyyymmdd format in the text file, but i want the format like mm/dd/yyyy in the text file, can anybody plz help me....

Hey Bala,
You can use the following conversion routine for converting the date from yyyymmdd format into mm/dd/yyyy.
data: l_date(10) type c.
Loop at t_vbak into wa_vbak.
CONCATENATE wa_vbak-vdatu4(2) wa_vbak-vdatu6(2) wa_vbak-vdatu(4) INTO l_date SEPARATED BY '/'.
wa_vbak-vdatu = l_date.
modify t_vbak from wa_vbak.
Endloop.
Regards,
Chetan.
PS: Reward points if this helps.

Formatting of workitem text

Similar Messages

Maybe you are looking for