Formatting out put data

I'm a beginner, I was trying to read data from two channels. I'm using "2 channel Oscilloscope.vi" (see attachment) that I found from vi examples. To read data from this vi I insert "Write LabView Measurement" vi and run the program.
Here comes the problem.
1. The data is bulky, how can i collect data in minute wise, not in second base, or how can I solve this problem.
2. After ever 499 data collection (it might be 499seconds), the title appears again and the numbering start from No. 1.
3. For every data i found from the two channel, it gives two columns of time data, that i don't need.
Generally I want to have my data from the two channel in a time (minute) basis, and save it to one file.
P.S. I'm using traditional DAQ with DAQCa
rd-AI-16XE-50.
Attachments:
2_Channel_Oscilloscope(mukera).vi ‏389 KB

Most of your problems can be solved by configuring the Write LabVIEW Measurement File VI differently.
Set the X Value Columns to Empty Time Column to get rid of the extra time data from you file.
If you want to continue saving to multiple files, click on the Settings... button and change the Width from 3 to 4. This will give you a lot more potential files.
If you want everything in one file, click Save to one file in the main dialog. Given the amount of data you are saving, this might not be a good idea.
Unless you really want to use text based files, given the amount of data you are generating, you may want to consider using either NI-HWS (available on the driver CD) or the new Storage VIs intr
oduced in LV 7.1.
NOTE: LabVIEW is a very feature rich language. A few minutes of searching around will generally get you the capability you want. If it doesn't, you can always roll your own. LabVIEW is a fairly decent general purpose language (please share if you do, that's what this forum is all about).
This account is no longer active. Contact ShadesOfGray for current posts and information.

Similar Messages

  • I have proubleam with string to date conversion, i out put date fromat is 2012-04-30T23:48:55.727-07:00 . so please help me the format conversion

    i have proubleam with string to date conversion, i out put date fromat is 2012-04-30T23:48:55.727-07:00 . so please help me the format conversion.
    i wrote the method but it not workig
    My method is
    -(NSDate *)dateformstr:(NSString *)str
    NSString *date = [str stringByReplacingPercentEscapesUsingEncoding:NSUTF8StringEncoding];
        NSDateFormatter *dateFormate = [[NSDateFormatter alloc] init];
      [dateFormate setDateFormat:@"yyyy-MM-dd'T'HH:mm:sssZZZZ"]
    // NSDate *formatterDate = [dateFormate  dateFromString:str];
        return formatterDate;
    but i did not the value and if i try othere formate i is working but my requiremet format is 2012-04-30T23:48:55.727-07:00.
    can any help it out in this senario.

    Sorry Butterbean, but I'm interested in the answer to your question myself.
    I've spent a few hours transfering my library from one computer to another and then find out that my ratings didn't transfer. Like you, I've spent many hours rating my 2000+ songs. I'm sure you have more, nevertheless, I want to find out how to get those ratings. They still show in my iTunes on my laptop but, when I go to the iTunes folder and display the details of at song, no rating is there. If you find out how to get them to display there in the iTunes folder, it seems that would be the key.
    Hope you get your answer soon.

  • Issue formatting out put

    i have an app that stores text from a form, in a data base field called RESPONSE.  the form field is either a text input or textarea.  My issue is that the customer enters both paragraph text and list text in the same field.  When i out put this in  report they want to see:
    some text, some text some text some text some text
    item 1  
    item 2
    item 3
    and currently they  see two paragraph on with the list items strung end to end.
    is there a way that i can take the data and on out putting it display the paragraph as a paragraph and the list items as a list?
    currently using paragraphFormat(response) which works great as long as response is not a list.
    any suggestions?

    Doing it this way:
    #replace(HTMLEditFormat(response), chr(10), "<br />", "all")#
    has the following advantages.
    It will display more or less as entered.
    Javascript will display instead of execute.
    Angle brackets used as math symbols will display properly.

  • MRP Out Put  Schedule lines date format to month

    Hi Friends,
    I am working on SAP4.7 Version.
    I have maintained all the relavent MRP datas in material master.
    Like MRP type - PD,
    Lot Size- MB ( Monthly Lot size).
    I have created planned independent requirement in MD61 monthly wise for that material.
    I have given Schedule agreement number in Source in List with MRP indicator - 2.
    I am running MRP for a material with MD02 with MRP parameter Delivery schedules -3 (Schedule lines) .
    The MRP running succesfully and creating delivery Lines with delivery dates.
    But the requirement by the client is..
    The delivery lines should be generated in month wise.
    How to convert the schedule lines generated in day format to Month format in MRP run out put?
    While creating schedule lines with ME38. we have option to select the day format / month format/ week wise?
    But the MRP out put always generated in date wise?
    Any one knows what changes i should make?
    Guide me ..
    Thanks & Best Regards
    Giri

    Hai Boss
              Can you throw some light , how you set default mrp indicator month wise with the help of ABAPER.
    My client requirement also same like you. Yours is month, mine is week. Pl help me out.
    regards
    ssp

  • MRP Schedule line out put format

    Hi Friends,
    I am working on SAP4.7 Version.
    I have maintained all the relavent MRP datas in material master.
    Like MRP type - PD,
    Lot Size- MB ( Monthly Lot size).
    I have created planned independent requirement in MD61 monthly wise for that material.
    I have given Schedule agreement number in Source in List with MRP indicator - 2.
    I am running MRP for a material with MD02 with MRP parameter Delivery schedules -3 (Schedule lines) .
    The MRP running succesfully and creating delivery Lines with delivery dates.
    But the requirement by the client is..
    The delivery lines should be generated in month wise.
    How to convert the schedule lines generated in day format to Month format in MRP run out put?
    While creating schedule lines with ME38. we have option to select the day format / month format/ week wise?
    But the MRP out put always generated in date wise?
    Any one knows what changes i should make?
    Guide me ..
    Thanks & Best Regards
    Giri

    Hi there,
    idealy its not possible in standard sap.
    but you can do one thing that...
    copy original programme of MD04 and create ZMD04 transaction  or you can search a usefull function mdule. Here you can convert date in months by using some abap code of function module if available.
    i know this is a very rough idea about solution bu it will help definitely help you
    Regards
    Hemant

  • Print out a Date in a format I want

    Now if I print out a Date object, I will get something like "Sat Jan 01 00:00:00 CST 2005", but what I want is "1/1/2005". I tried to use the get methods to get the month, day, and year so that I can put them in a format I want. However, all the get methods have been deprecated. What will be a possible(maybe easy as well?) way to do it? Thanks.

    Something like:
    import java.util.Date;
    import java.text.DateFormat;
    import java.text.SimpleDateFormat;
    public class Test {
        public static void main(String[] args) {
            DateFormat df = new SimpleDateFormat("d/M/yyyy");
            Date now = new Date();
            System.out.println(df.format(now));
            // new for Java 5.0 - almost the same format
            System.out.printf("%te/%<tm/%<tY%n", now);
    }Note: If you're using Java 5.0, then you can use the new printf method for PrintWriters. However, this doesn't appear to have a formatting token for single digit months.
    http://java.sun.com/j2se/1.5.0/docs/api/java/util/Formatter.html#dt
    Cheers, Neil

  • I loaded my ipad photos from camera and all the pictures sorted by date.  Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence.  Any idea how to put the photos back into date files?

    I loaded my ipad photos from camera and all the pictures sorted by date.  I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence.  Any idea how to put the photos back into date files other than reloading all of them from camera?

    What version of iPhoto?
    Select one and rotate it. Then rotate it back. Does that make it appear? 
    A much better work flow is the keep the photos after importing.  Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
    LN

  • PO Out put format queries

    What is the control data for SRM PO out put format ( Vendor, or GL account)
    how the SRM PO output format (XML to Printer) got changed for some PO's? is related to vendor? is there any field available when we can assign the vendor BP?
    Please reply at the earliest. Thanks in advance...

    The vendor data controls it, it can be maintained via front-end via a user assigned with the Administrator role.
    Kind regards,
    Tim

  • EXCEL  out put is not showing data

    Hi All,
    My report is working fine  it is showing data in XML but it is not showing data in Excel output.   Excel output is empty.
    i have attached  excel and xml files.  please help me.
    FYI: these are migrated reports from 10g to 11g.
    Thanks in advance for your time

    Using ua.bat  we upgraded 10g to 11g., we got sucessfully message.
    after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though  excel out put has corrupted. i downloaded excel layout from 10g and  uploaded in 11g report using upload layout.
    we did not make any changes in database.
    below one is not related to this one  but  .. after upgraded reports  multi parametrs  did not work if i select more than one column ( i opened as different topic) then i have removed
    ( (coalesce(null, :P_PPD_REGION) is null)  and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi  parameters.
    my doubt is is it correct thing i did ?  if not how can   my multi parameter will work .  we are using oracle as database.
    AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
    AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
    AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
    I really appreciate  for your support.

  • I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to use sync data in my iphone back to itune n my lap top. how can I perform this task with out loosing data in my i phone.

    I am using i 4 phone. recently I had a problem with my lap top and had formatted hard disk of it. Now I want to sync data in my iphone back to itune on my lap top. how can I perform this task with out loosing data in my i phone.

    Hey floridiansue,
    Do you have an installed email program such as Microsoft Outlook?  If your email is through an online login, such as Gmail, etc, then one will have to create an email association with a program such as Microsoft Outlook on the PC for this Scan to Email system to function.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • I wish to generate reports from the database an out put it but i need to enter a date from and to ina  html input box

    i wish to generate reports from the database an out put it
    but i need to enter a date from and to ina html input box
    in the input box a data of range will be input from a start
    to latest
    latest being the default as today's date.
    any help tips snipplets, concepts , turot=rails.
    thanks

    easycfm.com has tutorials for people who are brand new.
    If you don't know much about sql, I have heard good things
    about the book, Teach Yourself SQL in 10 Minutes by Ben
    Forta.

  • How can we get date period in out put screen as a header (PLS Urgent)

    Hi frdz,
    In ad hoc reports client want to get date field in out put screen as per selection screen date priod.
    Kindly let me know how can we get the same.
    EX: My report selection peiod is 01.01.2006 to 31.12.2006
    The same above date I want to get in out field screen header.
    Thanks,
    $ Lakshmi
    Message was edited by:
            Lakshmi

    see if this link helps http://support.apple.com/kb/ht1212
    you will probably have to restore the iphone as new.

  • Reports / intranet/ In some detail,  the user will input a date range from and 2 and will out put the records in the int

    Hello there,
    I am totally green in web development.
    my goal is to, for the user will input a date range from and
    to and will out put the records in the intranet when they press a
    button.
    However, the good news is: I have experience in programming.
    I have written applications for desktop in VB>NET and I
    understand RDBMS /sql concepts .
    But CF and WEB development is new to me.
    My current projects involves in connecting to DB and testing
    it. (it works fine)
    And outputting reports by to a intranet page. (records)
    i need help on how to start this asap. I will even do some
    practice at home.
    Tools I have at work
    • Development server(test)
    • Home site.
    • Toad for db connection.
    • Html reference guide
    • Cf dummies book.
    How can start my projects.
    (ex. Create cf, outputpage?)
    seriously, I am new to this.
    Thanks.

    Well, I had a really nice response with some concepts and
    ideas for you to practise on etc, but these dumb forums timed out
    and I lost it all
    If you want to pop me an email we could probably do a few
    exercises together that way - or even by MSN Messenger if you want.

  • Out put Script  or smart form formate

    Hi Experts,
    I want to send the PO Out  put to the Vendor through the mail.So in which formate it will got to the vendor wether it is word formate? Is that output  can be modifiable by the vendor ?
    Sridevi.

    Hi
    The output sent to the vendor via mail, need to be sent in ODF format , so that it cannot be changed.
    You can convert the Spool genrated into a PDF format & then send this throiugh mail in the PO Output Program
    Thanks & Regards
    Kishore

  • OUT PUT FORMAT MIS MATCHING

    Hi Gurus,
    One of our user is facing an issue while giving a print out, when he is giving a print the out put of the print out size is very small.
    Details : ECC5.0
    Printer : HP laserjet 2600
    Network printer
    Any suggestions how to go ahead with this issue.
    For the above details which drivers will be suitable.
    Waiting for your response.
    Thanks
    VJ

    Hi,
    For HP Laserjet, there are lot of suitable device type of similar type. Choose any HP related device type and also while firing the printout ask user to select the correct format type. Is it a smartform or standard ALV print. Ask user to choose the correct format type.
    Regards,
    Sharath

Maybe you are looking for