Formatting printer output for dotmatrix printer

Hi Experts,
i'm trying to format the output of the EPSON LQ-870 dot matrix printer to print the output in the paper size height 280 mm & width 210 mm.The device type i used for my output device is EPESCP2.For the first page the header and line items are coming correctly.But for the second page onwards, there is some space is coming between each line items.In third page,the header is coming little bit down from the required location.My page size is little bit less than the normal A4 size.How to rectify this?
Points will be rewarded if helpful.......
Thanks in advance.

Hello,
I created a condition table '550 - Shipping point/plant'. Then I created an access sequence 'ZSH1' and assigned this condition table 550 to it.
In the output determination procedure, the procedure 'V10000 - Header output' has the condition type PL02 - BOL: Single Delivery assigned to it.
The assignments look like:
Step       Counter         Cond Type
10               1                LD00     Delivery Note
20               2                PL00     Packing list
30               3                PL01     Planning Slip
40               4                PL02     BOL: Single Delivery
In Assign output procedures, the entry corresponding to delivery type 'LF' is:
Del Type                O/P procedure                       O/P Type
LF Delivery                    V10000 Header Output             LD00Delivery Note
When I try to enter a new condition record using VV21, it does not show up this key combination 'Shipping point/Plant'.
Can someone tell me if I am missing some customization?
Thanks,
Rugmani
Edited by: Rugmani Rajan on Oct 22, 2008 3:06 PM

Similar Messages

Formatting log output for unambiguous parsing

DMR cautions us to assume that any program's output may be used as another program's input.
Unfortunately, many Unix tools ignore this advice. Logging commands are particularly egregious
offenders, given that the enormous size of log files all but requires mechanical interpretation.
Log formats which may be perfectly suitable for human interpretation can cause real problems for
parsing scripts. Let's assume, for instance, that you want to log all open(2) calls, including the full
path names of the files being opened. How do you write the file names such that all possible byte
sequences can be encoded (and later, parsed) without error?
With the possible exception of nulls, no character is off-limits. Unix file names may include spaces,
tabs, quote marks, newlines, and what have you. This defeats any attempt to "quote" the names.
Other strategies include (a) specially encoding certain characters (e.g., "<" in HTML and XML use),
(b) encoding all characters (e.g., BinHex format), and use of counted strings.
Looking at the SDTG, I see no way to do any of these. The %x and %X formats do not seem to be
defined for string values, so I can't just print the string as a sequence of hex digit pairs. Nor can I loop
over the string, printing the characters one at a time. Is there something (e.g., a translator or some
other form of conversion function) that I can use to resolve this problem?

We should be able to get this implemented in thenear future.
Great! I'm unfamiliar, however, with Sun's patch and
upgrade mechanisms these days (I moved from
SunOS to FreeBSD, later adding Mac OS X). Could you
give me an idea of what to expect, both in
this pre-release period and after Solaris 10 ships? Solaris 10 will become generally available at the end of this calendar year. Prior to GA,
we are making a continuous series of beta releases available through Solaris Express,
about one per monthor so. After GA, like all Solaris releases, we issue patches when
there are functionality problems to be corrected, as well as Quarterly Updates which
batch together some add-ons with all the latest patches. In the case of a small DTrace
enhancement, we'll try to get it fixed before Solaris 10 GA, which means it will be fixed
in the final release of Solaris 10, and might show up in a Solaris Express download
in the coming months. Bryan, Adam, and I will also post here about any new DTrace
features of interest that show up in a particular Solaris Express download.
-Mike

Is there a plugin for CS6 that I need to download to get my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro that is running my CS6 program?

Is there a plugin for CS6 that I need to download to get my HP Officejet 7612 Wide Format Printer to be compatible with my MacBook Pro that is running my CS6 program?

HP Officejet 7612 mac updated drivers. You can download link.

In Forms Unable to print output for particular billing document number

Hi All
I am working forms
Here I am Unable to print output for particular billing document number, I am getting Error message like 'Graphic cannot be displayed'.
can anybody tell me the solution
Regards

Hi Chinna,
Please check that the billing document may be using different logo and which may not be avilable or not fitting in the window. (May be graphic is over flowing the window dimensions)
Lanka

List of Output For Particular Printer

HI,
SAP guru,
I want to find out LIst of OUTPUT for Particualr Printer.
Can you Plz Advice me
Thanks
Bhushan

Hi,Goto SE16 table and give table name NAST and then give out put device(field name-LDEST) and the execute afetr out put you can see out type in the field "message type"(KSCHL)
Hope you are very clear now...
Regards,
Chandra

What are the steps to view the output for check printing

what are the steps ,the method to view the output for check printing

Hi,
You can ask your functional person to make a payment to a vendor which will then issue a check. You can use the same payment run in program RFFOUS_C and create new checks by voiding the previous check number with a void reason code.
You can do this as many times as you want and test your check output.
Regards
Shounak

Printing output for invoice.

Hi All,
We want to trigger an output for the invoice for SK language. Currently, the output type works for leanguege EN. but its not working for SK language. The script that works is same for both the languages.
Also, we are not able to add a output for SK language to the invoice output.Kindly advice.

Hi!
I don't know exactly what's your problem, you were too brief in your topic, but first try out the followings:
- check in SE71, is your SAPScript really exists in SK language
- check in VV33 is your output setting correct
- check the SAPScript settings for invoicing (V3), in NACE transaction
- try to create a manual output in your invoice (default is RD00 output type, I don1t know are you using it or not)
Regards
Tamas

Print PO Output for Communication (POXPOPDF) in XML

Please someone guide how to generate a PDF form of PO through the request PO output for communication.
After gaining whatever knoweldge I could from metalink, I have defined a data definition in XML Publisher and also changed the output of the request to XML, to generate an XML output so that I can use that in the template builder to generate a layout template.
My request PO output for communication is completing in error and is nnot producing any output.
Please suggest , are there any missing steps?
Many Thanks,

Hi Bipuser,
Yes, I am having the value for this tag.
I will give you more clarification.
The Requestor/Deliver To Person is at the shipment level.
So for each shipment, there will be a RDT person. It can be same for every shipment or different.
Hence I have name stored at every shipment row.
So the tag is NOT NULL
All these names are stored in the same xml tag at different shipment rows.
Is there any way to check whether the xml tag at all the shipment rows are having the same value or different values?
Hope I have made my point clear.
thanks,
Anand

Unable to print from Photoshop CS4 in an iMac OS 10.6.3 to large format printer Epson 11880

Hi there! I was wondering if you could help me with this case.
Old computer: Mac G4 (purchased in 2002)
Old OS: OS 10.4.11 (Tiger)
CPU: Dual 1.25 GHz
Memory: 2 RAM
Software: Photoshop 7
Hardware: Large format printer: Epson 11880 (64” wide monster). Prints large posters, banners, etc.
As you can see, it is time for an upgrade...
New computer: iMac
New OS: OS 10.6.3 (Snow Leopard)
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
Memory: 16 GB
Software: Photoshop CS4
Hardware: Large format printer: Epson 11880
Situation: We hooked up everything and managed to print on the 11880 printer 2 times and printed two large format prints. On the third attempt, we encountered a serious problem...
Problem: After opening a file in Photoshop and sending it out for printing in the large format Epson printer, the file goes to the printer queue and stays there for 6 seconds, and then it disappears. It does not print. :-(
What we have done so far:
We made sure we downloaded the latest printer driver for this printer from Epson’s website.
The printer driver is correct. The computer talks to the printer and we are able to execute all the commands from the printer utilities panel. (i.e. check ink levels, clean heads, etc.)
And yes, the printer is okay, because we have been using it with the old G4 machine for about a year.
This problem got so frustrating, that we thought that something we transferred during the computer installation might be the culprit. So at one point we erased the hard drive on the new computer and reinstalled the operating system, and have not put any files from any old computers into this machine. The computer has nothing else in it. Except: The operating systems, and the Mac applications that come when the Mac comes out of the box. The only other program installed in it is Photoshop CS4 and the printer driver.
We were wondering if this was just a printing problem, period. So we added a small printer to the computer - and old Epson 2200 we have. We sent a file to this printer and there is not problem.
Perhaps, the file size might have been an issue? It does not matter. We can send a large 60 MB file to the printer or a small photograph measuring only 8 x 10, and these will linger in the queue for 6 seconds, and disappear never to be printed.
Temporary relief came when we got rid of Adobe Photoshop’s Preferences file. After getting rid of the file and allowing Photoshop to reconstruct it, we managed to print two large files on the printer. Then it failed again. Tried getting rid of the preferences again, and the trick did not work anymore. :-(
Another temporary relief came when we created another user in the computer. On the new user account it printed again a couple of times only to fail later.
And yes, the printer WILL print from other Mac programs. If for instance, we open a file on Preview, and send it to the printer and the file will be printed. And yes, we have managed to print very large files with this method.
In the last couple of days, we have spent 3 hours on the phone with the guys at Epson. They verified the driver and because the computer seems to be communicating with the printer and printing from other Mac applications, they suspected that the problem is with Adobe.
We called Adobe once, and spent 30 minutes with an Indian fellow who concluded that the problem was with how the computer handles the spooling. According to him, Photoshop sends the file to the computer and the computer seems to get rid of it. So he passed the buck and told us that the problem was with Apple.
We called Apple and spoke for 30 minutes with a friendly technician, who transferred us to a higher level techno-geek. I spent 1 more hour on the phone with Apple, and we tried everything. We went through Adobe’s knowledgebase and tried every suggested solution (see Adobe’s KB406452). It was with him that we found a temporary fix of removing the Preferences file, but the solution was short lived. He finally thought the problem was with Adobe as the printer is able to print from all applications EXCEPT Adobe Photoshop.
We called Adobe for the second time...and after waiting on hold from 1 entire hour, we got an Indian technician, that bless his heart, had a very thick accent and had no expertise, in my opinion. He was good at collecting data and he even made me share my computer screen so that he could troubleshoot the problem. After being constantly put on hold by him (because he had to consult with someone else), he passed the buck and said that it was Apple’s problem. I just told him that it was not as likely because all programs print EXCEPT Photoshop. After trying what I would consider a “hail Mary” of DELETING all the printers from my Library folder, and not replacing them, he recorded a case number for another Adobe technician to call us in a few days.
Because the above technician completely blew the Library, I just erased and reinstalled the OS. This time, I did not allow the OS to be updated - from 10.6.2 (that comes in the box), to 10.6.3. We tried printing using the 10.6.2 and had the same problem. :-(
Conclusion: I think it is a problem of Adobe CS4 not getting along with Apple’s new operating system. The Epson printer is doing fine, because it has been a product that has been in the market for almost 3 years. What is disappointing is that none of the companies wants to man up and say that it is a problem and that they are willing to work on it. Instead they pass the buck to the next company.
I can’t believe I am the only person experiencing this. Has anyone had this problem, and have you found a solution or workaround for it?

Dear Doyle, John and Gator Soup,
Thank you for your kind replies to my problem.
PS is assigned 70% RAM. In fact, I have never had so much RAM in my life. Files open at lightning fast speed! :-) We have never considered a RIP as we do not have an intense workload. In fact all the files we have tried to print print well on our old G4 with Tiger and Photoshop 7, which at the moment has saved our butt. However it would be nice to get the new faster machine with Photoshop CS4 to talk to the Epson 11880.
Yes, we are printing directly to the printer. We have hooked up the computer via a 6 ft USB cable to the unit.
The specs and pixel dimensions of a typical file we print are:
Type of file: tif (in this case it is an RGB file) // However, we avoid any color management from the computer or the printer when printing it at this time.
File size: 60 MB
Pixel size: 6796 x 3100
Print size: 34" x 16" @ 200 dpi
I have not tried saving it as a pdf yet. Will try that next.
I did go to the Console on the Mac though, and recorded its activity between 5:14 pm - 5:19 pm when I tried to print a file.
Remember, the symptoms are: We send a file to the printer...The file goes to the printer queue, and it lingers there for 6 seconds. The file then disappears.
Although there is a cryptic message of "invalid colorspace" in the log, I don't believe that the file is corrupt. First because we have tried several files, second because smaller versions of these can be printed in another Epson 2200 printer, and third because the large format images can still be printed using our old G4 machine with Tiger and Photoshop 7.
This might provide me with extra ammunition for when I call both Adobe and Apple on Monday. Apple has been quite good on customer support - particularly when they upgrade you to higher level geeks. ;-) Do you have any idea I what time I should call Adobe so that I can get people on the western hemisphere to answer the phone? It seems that after a certain time they start speaking with an Indian accent over there.
Enclosed, for whatever is worth, is the Console's log:
5/15/10 5:14:46 PM System Preferences[2947] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
5/15/10 5:14:46 PM [0x0-0xf00f0].com.apple.systempreferences[2947] System Preferences: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
5/15/10 5:14:46 PM System Preferences[2947] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4b00880: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14390: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14410: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14490: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:08 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] file://localhost/Applications/Adobe P
5/15/10 5:19:34 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Sat May 15 17:19:34 Norm-Nielsens-iMac.local Adobe Photoshop CS4[2991] <Error>: CGImageCreate: invalid image colorspace: NULL.

How do I get my Macbook Pro to print with HP Officejet 7500a Wide Format printer

My Macbook Pro (Retina Display) seems to have a problem to print with the HP Officejet 7500a - Wide Format printer - Is it the OS X 10.10.2 causing the problem. It works when connected to the USB cable - but wireless print is a problem.

let's see-on printer control panel, you've pressed the right arrow, then "network" then "wireless" then "wireless setup wizard" then OK,
and the wireless capability has been turned on, yes? (I didn't know you could turn it off) -either press the wireless button, or press setup on the printer's control panel, then wireless menu, then touch "On". A blue light should be lit up.
Failing that, restart the wireless components-turn off router, then printer, then turn on router and then turn on printer. dunno what else to suggest
apparently, you can do a wireless test from the printer-right arrow, then network, then wireless, then wireless network test.. .
also see if there are any updates for your printer-there has been a firmware update for this printer from 2012-try that, there is also a software update for 10.10 apparently it adds direct wireless printing...
JB

Officejet 7000 Wide Format printing birds

Hello my new HP friends.
I have an Officejet 7000 wide format printer, connected to a jetdirect box to print via NDPS. The people in the office are complaining that the printer is printing out 'little birds'. These are of course the birds on the alignment pages. Apparently it prints 2 of these per day.
Why is the printer doing this every day? The pigeons are starting to mount up.
Thanks,
Phil

Hello MerlotLady,
The lines are indeed clearly visable and look like they are caused by the inkt not bleeding very well through the paper. In this case I would recommend using another paper. I checked the HP website for you and HP recommends using advanced paper. So any kind of HP Advanced Paper will do, either glossy or high gloss as long as it is from the HP Advanced line. A copy of the recomendation below. If this will not solved the problem, best thing to do is contacting your local HP support. Let me know if it helps.
"Advanced photo paper
Best for printing with HP 02, 38, 60, 110, 564, 920, or 940 inks; you get vivid, instantly dry, smudge- and water-resistant photos"
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

OfficeJet 7000 Wide Format Printer

I would like to buy the OfficeJet 7000 Wide Format printer if it meets my needs.
I want to be able to print addresses and some small graphics onto 9X12 catalog envelopes so as to not need labels. Does anyone know if this would work?
Thank you!

Hi AndersT,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Officejet 7000 Wide Format Printer and not working with Windows 8. Here is a link to the HP Print and Scan Doctor. The HP Print and Scan Doctor will run a check on your system and download the appropriate software for you version of Windows. It will help you connect the printer and the computer to the same network.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Duplex printing in an Officejet 7110 wide format printer

Hi to the forum. I just purchased an Officejet 7110 wide format printer. I am trying to print both sides of the paper ( duplex ) manually as I have done with other HP printers but the print preferences do not have a "layout" tab and there is no other place I can find where I can select "print both sides". I can't do the old trick of manually typing in the odd numbered pages in the print dialog box since there is no option to type in multiple pages, just a range of pages. This is strange, since every printer I have ever use in the last 10 years allows simple duplexing by printing out the odd numbered pages, fliping the stack over and then printing out the even numbered pages. I can't believe that this new printer won't do that. What am I missing?

Hello Stargeezer63, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Best Large Format Printer with Aperture 3.1 & 10.6.5??

I have an Epson R1800 and am not pleased with my print results. Prints are too dark and generally lack "pop". I have read through threads here and other places and tried a lot of suggestions ... all to no real improvement.
Simple question -- which larger format printer (13") are you using that works very well with Aperture?
Thanks.
Ken

Hi,
I use the Epson R1900 with very good results. I never expect what prints well to look good either on my monitor, or on Slideshows transfered to video usage. If it looks good on my monitor, that is what I want the settings and adjustments to be locked into for my files. I think my monitor is very true -- some proof of this is evidenced by prints I have made via the print services I have available to me via SmugMug. Those prints (either Bay Photo or EZPrints per my choice) look just like what is on my monitor when shipped to me, and that is super! The print process fundamentally must compensate in some manner to achieve the backlit look of a monitor. I get very close to that in the prints from Aperture now, by using the Brightness and other controls in the Print Dialogue.
Ernie

Will a CS6 version of photoshop work with Canon's imageprograf IPF6400 wide format printer?

Will a CS6 version of photoshop work wiith Canon's imageprograf IPF6400 wide format printer?

Canon's Website says it has a plugin for that.

Formatting printer output for dotmatrix printer

Similar Messages

Maybe you are looking for