Formatting problems with document

Ok I've made an estimate form in pages and put a table in it. Adding a table has done a lot of odd things to the document. I can't change the spelling on any words inside the table. It will hightlight them as incorrect but I'm unable to change the spelling using my mouse for suggestions. I can change it manually if I can figure out how to spell the word.
But here are my real problems, please see attached screenshot.
1) In the line total column it won't allow me to put a period after the dollar amount. I put it there and it keeps removing it!
2) I can't line up the text in the 2 columns. Because when I put in the $640. where I want it to be (using return key) once I finish putting in the number it puts it at the top of the column. I can't keep it down by the text "Labor and Materials". As you can see by the red underline I had to put in text there and make it white so it won't show up to move the $640. down.
Can someone tell me how to fix these 2 issues??
Any help would be greatly appreciated.
Susan

Hi!
I would use cells with the same height. I would only write one line in each cell, at least for the ones that will have a number in the next cell to the right. You really don't need a punctuation after the number. I have used the formatting options in the Inspector. I have changed the cell borders for some cells to none (see the second image). I do this on Snow Leopard, not on Lion like you have. The spelling correction problem must someone else test. It works on my computer to right click on the misspelled word

Similar Messages

Problem with documents on iCloud.

I have a problem with documents on iCloud, I can`t use it with Pages on Mac and iOS too, Pages not view any documents and can not approach to save documents and not save new documents to iCloud. Any idea?
Thank you for help.

Hello,
Winston and Shayari,
I have also faced this problem with document on iCloud, I couldn't saved the documents to iCloud,
But I found this article problem posted by Hindi love Shayari San and I found the solution this way:
I signed out, then singed in again renabled the iCloud and it works.
I could do this with the instructions of Winston told to Shayari.
Well, a big thanks from my side.
Veena

Problem with document splitting

Hi,
I am encountering a problem with document splitting, where in while doing clearing of down payment against miro invoice profit center of first line item is over ridding profit center of second line item (line items are two different materials in purchase order).

Hi Milind,
Thanks for the reply.
I've done the below configuration and assigned cost/profit center update. It now works for profit center split. It still does not split accordingly per cost center though.
SAP Customizing Implementation Guide > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers >Ledger > Assign Scenarios and Customer Fields to Ledgers
In the below configuration, cost center is not an available option. Unlike the profit center which is available here.
SAP Customizing Implementation Guide > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Define Document Splitting Characteristics for General Ledger Accounting
The profit center split looks fine now, however the cost center split still is only reflected in the expense items and not on the AP item.
Any ideas on how to actually split the AP line items according to the cost center assignments ?
Edited by: Patrick on May 9, 2011 7:46 AM

Smartform: Formatting Problem with QUAN-Field

I want to print a smartform and get exception 1 (formatting error). With function SSF_READ_ERRORS I get an error table. There is on entry: errnumber = 020011, msgid = SSFCOMPOSER, msgty = E, msgno = 601, msgv1 = wa_outtab-menge.
It seems to be a formatting problem with field WA_OUTTAB-MENGE. But in the structure this field is referenced correctly.
Does anybody know a solution?

I solve this kind of problem in my SmartForm.
Try this:
Go to "Global Definitions" Node, then "Current/Quant.Fields" tab and set these values:
Field Name: WA_OUTTAB-MENGE
Reference Field: WA_OUTTAB-MEINS
Data Type: QUAN
Best Regards,
Eduardo Ribeiro.

Problems with Document Connect

I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

Whatsnew page for 3.6.17 has formatting problems with Firefox and I.E.

I just updated from 3.6.16 to 3.6.17n and the whatsnew page, displayed after Firefox restarted, has formatting problems in the lower right hand corner.
I checked it with I.E. 8 and it also shows the formatting problem.
Why wasn't this caught before the page was put into "production"?
The URL is http://www.mozilla.com/en-US/firefox/3.6.17/whatsnew/
There is a line with the text "Release Notes » Firefox Features » Firefox Help »" that is being displayed on top of other material.
I wonder what a new Firefox user or an inexperienced user would think of this? They might think that they did something wrong or, worse, they might consider Firefox had problems and they won't use it.
This reflects badly on Firefox.
One more thing, could someone make this textarea taller and wider. It is so small as to cause problems typing and proofing the material.
The URL is https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=whatsnew+page+for+3.6.17+has+formatting+problems+with+Firefox+and+I.E.&showform=1
How about upping the cols and rows values? They are currently rows="10" cols="40"

As you have a Power Mac you also have a alternative option to consider which is a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html

Problem with document

Hi All,
I've got error message : "problem with document numbering file. Restore the file and contact your software vendor..." after importing some invoices. The first line of message is 2100oInvoices.
Pls give advice how to resolve it. Thx
John

Dear,
Try below procedure:
Log off by File Exit, restarting the system, and logging on again.
If can't sovle your issue, you have to follow the recommandation from Du or log a message to SAP
Regards
Apple

Problem with document formatting

I am facing a formatting issue with a document (Pages 5.2).
It seems like pages is inserting a page break when I uses bullet points.
Here are few screenshots:
So far so good, but when I add one more "w", here is what happens:
I cannot understand it jumps to the next page...
Could anyone help me ?
Thanks a lot !
CK

Sorry, I just realized screenshots are not displayed, here they are.
I wrote my message again.
I am facing a formatting issue with a document (Pages 5.2).
It seems like pages inserts a page break when I uses bullet points.
Here are few screenshots:
So far so good, but when I add one more "w", here is what happens:
I cannot understand why it jumps to the next page...
Could anyone help me ?
Thanks a lot !
CK

Problem with document dates

Hello dear friends,
I have a little problem with some document dates
I've created a sales order (tcode: VA01) on 07.05.2009
After creating delivery on 25.06.2009 and doing PGI at the same day, I've created billing invoice (tcode: VF01).
I've noticed in invoice header data the following:
System shows that the invoice was created on 01.07.2009.
But, under "accounting data" tab, the system shows billing date: 26.06.2009
What's going on ? I don't seem to understand !
Regards,
Bahia.
Edited by: Bahia M. on Jul 15, 2009 3:07 PM

Dear Bahia,
> My request is: I would like to make the system brings the sales order's date as the princing date in the invoice.
While maintaining the Sales order type in VOV8 we generally maintain the setting for Pricing date proposal., please check this, i guess this is blank in your case that is why system is proposing Todays date as pricing date Please change it to B.
in Invoice as the pricing in billng is copying from the Sales order date. This control is in copy control.
For this please check these
Goto VTFL,
Select Delvery and sales document type, Click on item right side, Select the correct item category, generaly it will be TAN.
Now there is two things One is pricing source and the other is pricing type.
Make the relevant setting and try to do the cycle again and give us your feedback, i guess it will help.,
Thanks,
Raja

Format problem with MSI 865Neo2-PFISR

I had a problem with my MSI 865Neo2-PFISR, when i was formatting the drive (WD 40GB 7200) format it was not responding... by thw way... i completed the format with the 4th try, and before 2 wks i have format again and everything it was fine. But why it was not responding at the first format?
i have Celeron 2.4Ghz northwood
MSI 865Neo2-PFISR
Kingston 256 DDR400
WD 40GB 7200rpm
Abit ATi 9200SE-DT 128MB
SoundBlaster AudigyES

I had the same PSU noname 350W and i formatted my disk fine, just 3 times it stops to respond at the first time, now i have levicom PSU with 28A on 3.3V and it's ok...

Data format problem with Write to Spreedsheet File

I have a problem with the data format with Write to spredsheet file.
I have an N*3 array, where the 3 elements in each row should has different length. When I used Write to spreedsheet file,
it can only save the three data in one format. How can I save them in the format of "%0.8f %0.3f %0.2f"?
Thanks for your help.

Hi powerplay,
another solution may be to convert column-wise using "number to fractional string", then interleaving resulting arrays and again using "array to spreadsheet string" (with "space" as separator).
Many ways lead to Rome
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Problem with Document.importNode function

What is the problem with the following code?
What printed out by the last line of code (xmlres.print) is always empty while the 1st print out (xmldoc.print) does print the whole document?
Can anyone help me out?
Gary
FileReader fr = new FileReader("some_xml_file.xml");
DOMParser parser = new DOMParser();
parser.setValidationMode(XMLConstants.NONVALIDATING);
parser.parse(fr);
XMLDocument xmldoc = parser.getDocument();
xmldoc.print(System.out); // 1st print out
Element elem = xmldoc.getDocumentElement();
XMLDocument xmlres = new XMLDocument();
xmlres.importNode(elem, true);
xmlres.print(System.out); // 2nd print out ; here prints nothing!

Hi Andrew,
Thanks for the reply. Yes you are correct, that pretty much sums it up. The problem is that absolutely nothing happens. The page redirects correctly (onto itself) however the plsql page process does not fire. I have done the following:
* Checked there are no conditional traps inside the plsql code block - None
* Tried removing the conditional processing on the process definition - No difference
* Put in a temporary branch to another page conditional on the REQUEST value to test it is correctly working... It does.
* I have dropped and recreated the page process in case there was something in there that I missed - No difference
The only time that the plsql is fired is when I remove the call to confirmDelete(). This worked for both the original and the recreated process. It just seems to skip the plsql process for some reason.
Any suggestions??
Cheers,
Mike

Formatting problem with windows XP

Hmmm... I have several older macs that I'm currently using for parts for both my G4 and my PC. The problem I'm having is with the HDDs. I've removed several internal IDE hard drives (from 3.2 to 15 GB) all of which are formatted for mac OS9.1 extended. They work great in my G4 but my PC (windows XP professional) won't even recognize them and I can't re-format them in DOS on my mac because that option isn't available in drive setup..
Do I need a third party program (either mac or PC and what would you recommend) or is there someway to work around this? I would hate to just throw them out because they do work
I realize this isn't critical but it is a bit of a pain and any help would be appreciated.
G4 Mac OS 9.1.x

Thanx again Tom!
The only problem with Swissknife is that it only works on drives that are already recognized by the PC. I can't even get these guys to show up, let alone mount! I even have a USB to IDE connection so I can attach them externally. It works great on my PC formatted HDs but still won't register my mac ones..
by the way, I tried your idea with OS9 and it still won't let me format in DOS
Is a puzzlement..

Problem with Document.exportFile funtion

How to have the progress bar on when exporting with custom PDF export preset?
I've faced problem here when using below function,
Document.exportFile (format:varies, to: File , showingOptions: Boolean , using: PDFExportPreset , versionComments: string , forceSave: Boolean )
When showingOptions is true, PDFExportPreset defined will not be used.
I'm using CS4.
Please help!!
Thank you very much.

Scripts that set 'false' for showOptions will have no visual display to show when the exporting PDF has actually completed. If Indesign file was to close prior to exporting progress gets completed, the resultant PDF created could be disastrous.
Are you sure about that? It not the behaviour that Im seeing here… If I try to shut a document down while a export is still processing then I will be greated by a dialog warning me of such an event… Anyhows you have got a process indicator… It's a bit like KIT's grill from the days of Knightrider but there you go…

HT201071 RAW format Problem with NIKON D600 after updating to maverick.

We still have problems after this update.
Pictures in RAW format imported to Aperture are brilliant as they are with the NIKON D600. Imported Pictures with the NIKON D800 are aweful. They are kind of grey without any saturation. To convert every single Picture to JPEG brings back their brilliance and colors. We have consulted the apple and the aperture support, but they dind't have any solution to fix our issue.
Any ideas?

Have you also asked in the Adobe forums? To have people read your post, best not to include long crash reports until asked to do so.

Formatting problems with document

Similar Messages

Maybe you are looking for