Formatting text (bold, italics, etc) in webmail client does not work in Firefox; works in IE and Chrome

I use the Smarsh webmail client for my company's email service.
I have been using Firefox in the office for quite some time, and only recently has this issue come up.
When composing emails using the Smarsh client, I cannot format text (using bold, italics, or underline) using the buttons built in to the client. When I highlight text and click a formatting button, the cursor just moves to the end of the line.
Using keyboard shortcuts to edit the formatting works sometimes, but is sporadic (sometimes formatting PREVIOUSLY selected text but not the currently selected text).
I have tried downgrading to Firefox 16, 17, and 18 (as this problem has only come up in the last couple of weeks, and Firefox 19 was release I believe on 2/13), but this did not solve the problem either.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Similar Messages

  • Cisco 1841 as PPTP client Does not work

    Dear All,
    I have Cisco 1841 router running the below roles       
    1) SSL VPN Server
    2) PPTP Server
    3) Site to Site Connection with Sonicwall router
    I want the router to be configured a pptp client to internet vpn server (so that i will get a fixed public ip )
    Once i get this ip address i want to use this connection to accept in coming connection and forward ports to internal host,
    I went through below
    http://www.mreji.eu/content/cisco-router-pptp-client
    https://supportforums.cisco.com/thread/2167562
    But it does not work as i do not have the option for the below 2 commands in vpdn-group 2 section.(Please see section in blue)
    protocol pptp
      rotary-group 4
    Please Advise and Help
    Regards
    Hasan Reza
    My Current Config is as below
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.06.09 17:55:23 =~=~=~=~=~=~=~=~=~=~=~=
    exit
    Gateway#show run |      
    Building configuration...
    Current configuration : 25109 bytes
    ! Last configuration change at 13:33:57 UTC Sun Jun 9 2013 by admin
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname Gateway
    boot-start-marker
    boot system flash c1841-advsecurityk9-mz.151-2.T1.bin
    boot-end-marker
    logging buffered 4096
    no logging console
    enable secret 5 $1$SciF$TlX1tR5qaG9ZE7pdZHcRJ/
    no aaa new-model
    dot11 syslog
    ip source-route
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.236.5.1 10.236.5.20
    ip dhcp excluded-address 10.236.5.21 10.236.5.50
    ip dhcp excluded-address 172.21.51.2 172.21.51.50
    ip dhcp pool ContosoPool
       network 10.236.5.0 255.255.255.0
       default-router 10.236.5.254
       dns-server 213.42.20.20 195.229.241.222
    ip dhcp pool DMZ
       network 172.21.51.0 255.255.255.0
       dns-server 172.21.51.10
       default-router 172.21.51.1
       domain-name contoso.local
    ip cef
    ip domain name contoso.local
    ip name-server 213.42.20.20
    ip name-server 195.229.241.22
    ip name-server 195.229.241.222
    ip ddns update method dyndns
    HTTP
      add http://xxxxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
      remove http://xxxxxx:yyyyy@@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
    interval maximum 0 1 0 0
    multilink bundle-name authenticated
    vpdn enable
    vpdn-group 2
    request-dialin
      protocol l2tp
    initiate-to ip 173.195.0.42
    vpdn-group RAS-VPN
    ! Default PPTP VPDN group
    accept-dialin
      protocol pptp
      virtual-template 1
    l2tp tunnel timeout no-session 15
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP.StartSSL.CA
    enrollment terminal pem
    revocation-check none
    crypto pki trustpoint TP.StartSSL-vpn
    enrollment terminal pem
    usage ssl-server
    serial-number none
    fqdn ssl.spktelecom.com
    ip-address none
    revocation-check crl
    rsakeypair RSA.StartSSL-vpn
    crypto pki trustpoint TP-self-signed-1981248591
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1981248591
    revocation-check none
    rsakeypair TP-self-signed-1981248591
    crypto pki trustpoint VMWare
    enrollment terminal
    revocation-check crl
    crypto pki trustpoint OWA
    enrollment terminal pem
    revocation-check crl
    crypto pki certificate chain TP.StartSSL.CA
    certificate ca 01
      (removed the certificate info for clarity)
       quit
    crypto pki certificate chain TP.StartSSL-vpn
    certificate 0936E1
        (removed the certificate info for clarity)9
       quit
    certificate ca 18
      (removed the certificate info for clarity)
       quit
    crypto pki certificate chain TP-self-signed-1981248591
    certificate self-signed 01
        (removed the certificate info for clarity)
       quit
    crypto pki certificate chain VMWare
    certificate ca 008EDCE6DBCE6B
        (removed the certificate info for clarity)
       quit
    crypto pki certificate chain OWA
       (removed the certificate info for clarity)
    license udi pid CISCO1841 sn FCZ122191TW
    archive
    log config
      hidekeys
    username admin privilege 15 password 7 1304131F02023B7B7977
    username ali password 7 06070328
    redundancy
    crypto isakmp policy 10
    encr 3des
    authentication pre-share
    group 2
    lifetime 84000
    crypto isakmp key admin_123 address 0.0.0.0 0.0.0.0
    crypto isakmp keepalive 10
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec transform-set vpnset esp-3des esp-sha-hmac
    crypto ipsec transform-set strongsha esp-3des esp-sha-hmac
    crypto dynamic-map mydyn 10
    set transform-set strongsha
    crypto map Dxb-Auh 1000 ipsec-isakmp dynamic XXXXXXXXXX
    interface FastEthernet0/0
    description Internal Network (Protected Interface)
    ip address 10.236.5.254 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface ATM0/0/0
    no ip address
    shutdown
    no atm ilmi-keepalive
    interface BRI0/1/0
    no ip address
    encapsulation hdlc
    shutdown
    interface Virtual-Template1
    ip unnumbered Dialer1
    peer default ip address dhcp-pool ContosoPool
    ppp encrypt mppe auto required
    ppp authentication ms-chap ms-chap-v2 eap
    interface Dialer1
    ip ddns update hostname XXXXXXX.dyndns.org
    ip ddns update dyndns
    ip address negotiated
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    ip tcp adjust-mss 1450
    dialer pool 1
    ppp pap sent-username vermam password 7 13044E155E0913323B
    crypto map Dxb-Auh
    interface Dialer2
    mtu 1460
    ip address negotiated
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    dialer in-band
    dialer idle-timeout 0
    dialer string 123
    dialer vpdn
    dialer-group 2
    ppp pfc local request
    ppp pfc remote apply
    ppp encrypt mppe auto
    ppp authentication ms-chap ms-chap-v2 callin
    ppp eap refuse
    ppp chap hostname hasanreza
    ppp chap password 7 070E2541470726544541
    interface Dialer995
    no ip address
    ip local pool webssl 10.236.6.10 10.236.6.30
    ip forward-protocol nd
    ip http server
    ip http secure-server
    ip nat inside source list nat interface Dialer1 overload
    ip nat inside source static tcp 10.236.5.12 25 interface Dialer1 25
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip route 172.21.51.0 255.255.255.0 10.236.5.253
    ip access-list extended internal
    permit ip any 10.236.5.0 0.0.0.255
    ip access-list extended nat
    deny   ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
    deny   ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
    permit ip 10.236.5.0 0.0.0.255 any
    ip access-list extended nonat
    permit ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
    permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
    ip access-list extended sslacl
    ip access-list extended webvpn
    permit tcp any any eq 443
    logging esm config
    access-list 101 permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
    control-plane
    line con 0
    line aux 0
    line vty 0 4
    exec-timeout 0 0
    login local
    transport preferred ssh
    transport input telnet ssh
    line vty 5 15
    exec-timeout 0 0
    login local
    transport preferred ssh
    transport input telnet ssh
    scheduler allocate 20000 1000
    webvpn gateway gateway1
    ip interface Dialer1 port 443
    ssl encryption rc4-md5
    ssl trustpoint TP.StartSSL-vpn
    inservice
    webvpn install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1
    webvpn install csd flash:/webvpn/sdesktop.pkg
    webvpn context webvpn
    ssl authenticate verify all
    url-list "Webservers"
       heading "SimpleIT Technologies NBNS Servers"
       url-text "Google" url-value "www.google.com"
       url-text "Mainframe" url-value "10.236.5.2"
       url-text "Mainframe2" url-value "https://10.236.5.2"
    nbns-list "ContosoServer"
       nbns-server 10.236.5.10
       nbns-server 10.236.5.11
       nbns-server 10.236.5.12
    port-forward "PortForwarding"
       local-port 3389 remote-server "10.236.5.10" remote-port 3389 description "Server-DC01"
    policy group policy1
       url-list "Webservers"
       port-forward "PortForwarding"
       nbns-list "ContosoServer"
       functions file-access
       functions file-browse
       functions file-entry
       functions svc-enabled
       svc address-pool "webssl"
       svc default-domain "Contoso.Local"
       svc keep-client-installed
       svc split include 10.236.5.0 255.255.255.0
       svc split include 10.236.6.0 255.255.255.0
       svc split include 172.31.1.0 255.255.255.0
       svc split include 172.21.51.0 255.255.255.0
       svc dns-server primary 172.21.51.10
    default-group-policy policy1
    gateway gateway1
    inservice
    end
    Gateway#          

    Dear All,
    I have Cisco 1841 router running the below roles       
    1) SSL VPN Server
    2) PPTP Server
    3) Site to Site Connection with Sonicwall router
    I want the router to be configured a pptp client to internet vpn server (so that i will get a fixed public ip )
    Once i get this ip address i want to use this connection to accept in coming connection and forward ports to internal host,
    I went through below
    http://www.mreji.eu/content/cisco-router-pptp-client
    https://supportforums.cisco.com/thread/2167562
    But it does not work as i do not have the option for the below 2 commands in vpdn-group 2 section.(Please see section in blue)
    protocol pptp
      rotary-group 4
    Please Advise and Help
    Regards
    Hasan Reza
    My Current Config is as below
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.06.09 17:55:23 =~=~=~=~=~=~=~=~=~=~=~=
    exit
    Gateway#show run |      
    Building configuration...
    Current configuration : 25109 bytes
    ! Last configuration change at 13:33:57 UTC Sun Jun 9 2013 by admin
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname Gateway
    boot-start-marker
    boot system flash c1841-advsecurityk9-mz.151-2.T1.bin
    boot-end-marker
    logging buffered 4096
    no logging console
    enable secret 5 $1$SciF$TlX1tR5qaG9ZE7pdZHcRJ/
    no aaa new-model
    dot11 syslog
    ip source-route
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.236.5.1 10.236.5.20
    ip dhcp excluded-address 10.236.5.21 10.236.5.50
    ip dhcp excluded-address 172.21.51.2 172.21.51.50
    ip dhcp pool ContosoPool
       network 10.236.5.0 255.255.255.0
       default-router 10.236.5.254
       dns-server 213.42.20.20 195.229.241.222
    ip dhcp pool DMZ
       network 172.21.51.0 255.255.255.0
       dns-server 172.21.51.10
       default-router 172.21.51.1
       domain-name contoso.local
    ip cef
    ip domain name contoso.local
    ip name-server 213.42.20.20
    ip name-server 195.229.241.22
    ip name-server 195.229.241.222
    ip ddns update method dyndns
    HTTP
      add http://xxxxxx:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
      remove http://xxxxxx:yyyyy@@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
    interval maximum 0 1 0 0
    multilink bundle-name authenticated
    vpdn enable
    vpdn-group 2
    request-dialin
      protocol l2tp
    initiate-to ip 173.195.0.42
    vpdn-group RAS-VPN
    ! Default PPTP VPDN group
    accept-dialin
      protocol pptp
      virtual-template 1
    l2tp tunnel timeout no-session 15
    crypto pki token default removal timeout 0
    crypto pki trustpoint TP.StartSSL.CA
    enrollment terminal pem
    revocation-check none
    crypto pki trustpoint TP.StartSSL-vpn
    enrollment terminal pem
    usage ssl-server
    serial-number none
    fqdn ssl.spktelecom.com
    ip-address none
    revocation-check crl
    rsakeypair RSA.StartSSL-vpn
    crypto pki trustpoint TP-self-signed-1981248591
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1981248591
    revocation-check none
    rsakeypair TP-self-signed-1981248591
    crypto pki trustpoint VMWare
    enrollment terminal
    revocation-check crl
    crypto pki trustpoint OWA
    enrollment terminal pem
    revocation-check crl
    crypto pki certificate chain TP.StartSSL.CA
    certificate ca 01
      (removed the certificate info for clarity)
       quit
    crypto pki certificate chain TP.StartSSL-vpn
    certificate 0936E1
        (removed the certificate info for clarity)9
       quit
    certificate ca 18
      (removed the certificate info for clarity)
       quit
    crypto pki certificate chain TP-self-signed-1981248591
    certificate self-signed 01
        (removed the certificate info for clarity)
       quit
    crypto pki certificate chain VMWare
    certificate ca 008EDCE6DBCE6B
        (removed the certificate info for clarity)
       quit
    crypto pki certificate chain OWA
       (removed the certificate info for clarity)
    license udi pid CISCO1841 sn FCZ122191TW
    archive
    log config
      hidekeys
    username admin privilege 15 password 7 1304131F02023B7B7977
    username ali password 7 06070328
    redundancy
    crypto isakmp policy 10
    encr 3des
    authentication pre-share
    group 2
    lifetime 84000
    crypto isakmp key admin_123 address 0.0.0.0 0.0.0.0
    crypto isakmp keepalive 10
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec transform-set vpnset esp-3des esp-sha-hmac
    crypto ipsec transform-set strongsha esp-3des esp-sha-hmac
    crypto dynamic-map mydyn 10
    set transform-set strongsha
    crypto map Dxb-Auh 1000 ipsec-isakmp dynamic XXXXXXXXXX
    interface FastEthernet0/0
    description Internal Network (Protected Interface)
    ip address 10.236.5.254 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface ATM0/0/0
    no ip address
    shutdown
    no atm ilmi-keepalive
    interface BRI0/1/0
    no ip address
    encapsulation hdlc
    shutdown
    interface Virtual-Template1
    ip unnumbered Dialer1
    peer default ip address dhcp-pool ContosoPool
    ppp encrypt mppe auto required
    ppp authentication ms-chap ms-chap-v2 eap
    interface Dialer1
    ip ddns update hostname XXXXXXX.dyndns.org
    ip ddns update dyndns
    ip address negotiated
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    ip tcp adjust-mss 1450
    dialer pool 1
    ppp pap sent-username vermam password 7 13044E155E0913323B
    crypto map Dxb-Auh
    interface Dialer2
    mtu 1460
    ip address negotiated
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    dialer in-band
    dialer idle-timeout 0
    dialer string 123
    dialer vpdn
    dialer-group 2
    ppp pfc local request
    ppp pfc remote apply
    ppp encrypt mppe auto
    ppp authentication ms-chap ms-chap-v2 callin
    ppp eap refuse
    ppp chap hostname hasanreza
    ppp chap password 7 070E2541470726544541
    interface Dialer995
    no ip address
    ip local pool webssl 10.236.6.10 10.236.6.30
    ip forward-protocol nd
    ip http server
    ip http secure-server
    ip nat inside source list nat interface Dialer1 overload
    ip nat inside source static tcp 10.236.5.12 25 interface Dialer1 25
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip route 172.21.51.0 255.255.255.0 10.236.5.253
    ip access-list extended internal
    permit ip any 10.236.5.0 0.0.0.255
    ip access-list extended nat
    deny   ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
    deny   ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
    permit ip 10.236.5.0 0.0.0.255 any
    ip access-list extended nonat
    permit ip 10.236.5.0 0.0.0.255 172.19.19.0 0.0.0.255
    permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
    ip access-list extended sslacl
    ip access-list extended webvpn
    permit tcp any any eq 443
    logging esm config
    access-list 101 permit ip 10.236.5.0 0.0.0.255 172.31.1.0 0.0.0.255
    control-plane
    line con 0
    line aux 0
    line vty 0 4
    exec-timeout 0 0
    login local
    transport preferred ssh
    transport input telnet ssh
    line vty 5 15
    exec-timeout 0 0
    login local
    transport preferred ssh
    transport input telnet ssh
    scheduler allocate 20000 1000
    webvpn gateway gateway1
    ip interface Dialer1 port 443
    ssl encryption rc4-md5
    ssl trustpoint TP.StartSSL-vpn
    inservice
    webvpn install svc flash:/webvpn/anyconnect-win-3.1.00495-k9.pkg sequence 1
    webvpn install csd flash:/webvpn/sdesktop.pkg
    webvpn context webvpn
    ssl authenticate verify all
    url-list "Webservers"
       heading "SimpleIT Technologies NBNS Servers"
       url-text "Google" url-value "www.google.com"
       url-text "Mainframe" url-value "10.236.5.2"
       url-text "Mainframe2" url-value "https://10.236.5.2"
    nbns-list "ContosoServer"
       nbns-server 10.236.5.10
       nbns-server 10.236.5.11
       nbns-server 10.236.5.12
    port-forward "PortForwarding"
       local-port 3389 remote-server "10.236.5.10" remote-port 3389 description "Server-DC01"
    policy group policy1
       url-list "Webservers"
       port-forward "PortForwarding"
       nbns-list "ContosoServer"
       functions file-access
       functions file-browse
       functions file-entry
       functions svc-enabled
       svc address-pool "webssl"
       svc default-domain "Contoso.Local"
       svc keep-client-installed
       svc split include 10.236.5.0 255.255.255.0
       svc split include 10.236.6.0 255.255.255.0
       svc split include 172.31.1.0 255.255.255.0
       svc split include 172.21.51.0 255.255.255.0
       svc dns-server primary 172.21.51.10
    default-group-policy policy1
    gateway gateway1
    inservice
    end
    Gateway#          

  • DHCP client does not work poperly after systemd and Gnome 3.6 upgrade

    Upgraded my system today from Gnome 3.4 to 3.6 (and systemd was updated as well), and since then acquiring an IP address using DHCP does not work anymore.
    I am using IPv4 only internally, but neither dhclient or dhcpcd manages to get an IPv4 address.
    It seems like IPv6 is priority one, and beacuse there is no IPv6 DHCP server available NetworkManager aborts the whole setup process.
    To make sure that IPv6 should not be considered, I have changed "method" in NetworkManager to "Ignore" for IPv6.
    I have also tried to downgrade NM to 0.9.6.0 from 0.9.6.4 (since that version works on another, not upgraded, machine), without any result.
    Also switched dhclient to dhcpcd, without any result.
    The machine is a "pure" systemd machine.
    DHCP works for other devices in the network.
    Versions:
    systemd 195-2
    NetworkManager 0.9.6.4
    isc-dhclient-4.2.3-P2
    I have no issues on a system where following versions are running:
    systemd 189-4
    NetworkManager 0.9.6.0
    dhcpcd 5.6.2
    Log: http://pastebin.com/2wMC0JLe

    Think I have identified the issue now.
    Neither dhcpcd or dhclient is sending the host name properly to the DHCP server anymore. I had an IP address reserved in the DHCP server for my host and after deleting this reservation my host is able to acquire an IP (dynamic) address. The reserved static address could never be acquired.
    Conclusion: dhclient and dhcpcd is not sending the host name as before, causing the DHCP server to get stuck (while waiting for the host name) whenever a NIC with a reserved IP address is requesting an IP address.
    Downgrading the dhcp clients has not yet worked, so there might be some underlying component that is causing the problem. ath5k? systemd?

  • WF initiator in another client does not work

    Hi,
    I have created my WF and the first step is a user decision (yes/no). In this I use the &_WF_INITIATOR& as the addresse of the WI. It works fine in the development client but not in another client and I wonder why.
    When I check the protocol, system is telling me that there´s no agent available which is not true. I see in the container USxxxxxx and I also created an object in the container for passing the user name like USxxxxxxx and nothing. It does not work.
    What could the problem be ??
    Thanks

    Hi,
    I double-checked the task and it it general. I also checked the log for the step and there´s no WFINITIATOR nor WIACTUAL_AGENT.
    In the technical details I see that the workflow´s container has the WFINITIATOR with USxxxxxx and in the next step (user decision) there´s no such information nor WIACTUAL_AGENT. Based on this I corrected my WF for passing WFINITIATOR to WIACTUAL_AGENT in the step (using the data flow).
    The above does not work. I see now in the technical details  USxxxxxx for WIACTUAL_AGENT in the step but the protocol still tells me that there´s to agent.
    Any ideas ??

  • The client does not work

    Why do you have to open the latest Skype client and continuously logs only then exit after 1-2 seconds. The Windows event log the following:
    Event ID: Description:
    100 started Skype update
    103 Skype update service is shutting down due to idle timeout.
    101 Service stopped
    I can not use Skype because it has all new clients tried and does not work for months. I once started a few hours after it is confused and began the long walk on the forward end of 2019, has been in the Imprint.
    Op. System Win XP
    Current Client: 6.22

    Reverting to the older Skype 6.14.0.104 version should solve the "time-travelling" issue.
    http://community.skype.com/t5/Windows-desktop-clie​​nt/connetion-problems/m-p/3658855#M303470
    After installing the 6.14.0.104 version from the provided link make sure to disable automatic updates:
    Tools -> Options -> Advanced -> Automatic updates ->Turn off automatic updates
    However, you should also try the "fix" provided in this Microsoft support article:
    https://support2.microsoft.com/kb/895980

  • 10.5 Server iCal + 10.3.9 Client - does not work!

    Has anyone an insight, why this is not working together ?
    All machines using 10.3.9 have problems accessing my iCal server.
    I even cant go to the url using safari:
    http://server-name:8008/calendars/
    returns 401
    Using Firefox however I can sucessful authenticate the user.
    Now, since iCal uses webkit to access the DAV resource, I suspect, this OS is unsupported.
    Does anyone know a workaround ?

    Well,
    I researched a little and found, that, if you do not run 10.5, there is no way to use iCal with Apples "iCal" server.
    (with 10.4 you have access to a calender server, but cannot modify an entry)
    In my opinion, this is not acceptable.
    Even if this server I bought, was not planned for a groupware application in the first place, I would expect, that the basic features work for clients using an OS not older then 3 or 4 years.
    If apple really wants to compete in this place, they have to give the users a working server and client for mail, adressbook and appointments.
    If I setup a Microsoft Exchange Server, I can use anything down to Windows NT to access an Exchange server. This is a platform even 10 Years old.
    I dont think that it is difficult for Apple to make iCal availible for 10.4 and 10.3 users. Apple simply did not care about it.
    This is a reason, why you should not choose Apple as a server platform. Regardless of price or perfomance, because it simply does not work as you would expect.
    Nobody would buy a replacement for about 60% of his machines only because iCal needs OS 10.5. This is ridiculous.
    Even if only about 30% of the Hardware in this special case actually is not capable of 10.5 it still does not make sense.
    Upgrading machines from 10.3,10.4 to 10.5, just to get access to a calendar application for $100/seat - that does not make sense.

  • Client variables not working in Apache and CF8

    I have Apache and CF8 set up with multiple virtual hosts
    locally for development(win xp pro, apache 2.2.4)
    Client variables are not working. I can log into CF
    administrator fine(not sure if authentication uses client variables
    or not). Any site that I work on that uses client variables behaves
    as if the variable is not defined after setting it then going to
    another page that checks for its existence. I have verified that
    client variables are set up in cf administrator.
    Thanks for any help

    Thanks a lot. I understood the mistake. Pls do not spend time on this.
    Thanks,
    Swarna

  • /etc/modprobe.d/*.conf does not work

    I want to pass an option to a kernel mod on bootup. Specifically I want to alter the polling rate of the USB mouse to 500hz, by passing the options usbhid mousepoll=2 to usbhid mod.
    I added a new file to /etc/modprobe.d/ called usbhid.conf with the following contents:
    options usbhid mousepoll=2
    And by executing at runtime:
    sudo modprobe -r usbhid && sudo modprobe usbhid
    Then the mouse correctly runs at 500hz.
    So the conf file works if I execute it manually, but it doesn't get executed on bootup even though I have modconf on the HOOKS= in /etc/mkinitcpio.conf.
    Anyone knows what's wrong and why this doesnt work, or how I can debug it to find it out by myself?
    Last edited by Nektarios (2014-02-13 12:25:20)

    Yes it is.
    lsinitcpio -l /boot/initramfs-linux.img | grep modprobe
    ./usr/bin/modprobe
    ./usr/lib/modprobe.d
    ./usr/lib/modprobe.d/usb-load-ehci-first.conf
    ./etc/modprobe.d
    ./etc/modprobe.d/vmware-fuse.conf
    ./etc/modprobe.d/uvesafb.conf
    ./etc/modprobe.d/modprobe.conf
    Maybe I'm missing something here or it's a copy paste error but you said it's called usbhid.conf, that's not in this list.
    See: https://wiki.archlinux.org/index.php/mk … activation to rebuild your image.

  • WS Client does not work after redeploy of EJB 3.0 Webservice.

    I'm using Netbeans 5.5 RC1 against Glassfish. Glassfish reports this: " Sun Java System Application Server Enterprise Edition 9.1 (build b13)" for version info.
    I have a simple Session Bean with the @WebService annotation.
    I create a web service client using Netbeans to call the web service, I populate the arguments, and run it, and it works just fine.
    If I simply REDEPLOY the EAR containing the Session Bean (via the Netbeans menu), the client will no longer work.
    Rather, I get an exception:
    javax.xml.ws.soap.SOAPFaultException: Unable to find invocation method
            at com.sun.xml.ws.encoding.soap.ClientEncoderDecoder.toMessageInfo(ClientEncoderDecoder.java:84)
            at com.sun.xml.ws.encoding.soap.client.SOAPXMLDecoder.toMessageInfo(SOAPXMLDecoder.java:209)
            at com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:538)
            at com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher.doSend(SOAPMessageDispatcher.java:258)
            at com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher.send(SOAPMessageDispatcher.java:137)
            at com.sun.xml.ws.encoding.soap.internal.DelegateBase.send(DelegateBase.java:84)
            at com.sun.xml.ws.client.EndpointIFInvocationHandler.implementSEIMethod(EndpointIFInvocationHandler.java:172)
            at com.sun.xml.ws.client.EndpointIFInvocationHandler.invoke(EndpointIFInvocationHandler.java:106)
            at $Proxy16.acceptPing(Unknown Source)
            at javaapplication6.Main.main(Main.java:66)When I run the client a second time, it works.
    Any ideas what this may be?

    A similar bug was reported earlier and it was fixed in SJSAS9.1-b15. Is there a possibility for you to try with some NB5.5 build that has a later AS9.1build ?

  • Data Overage Alert, Text Msg - reply YES to increase data - does not work

    I have talked to (2) Vzn customers that have replied "YES"  to the text message alert regarding data overage.  Reply "YES" to increase your data plan by 2GB for $10. Both replied as instructed and their plans were NOT changed systematically as expected. Fortunately I was calling them pre-bill to review their usage and made the change manually.  Is there a problem with this new reply system??
    From Vzn: Effective 3/2/14, account owners can reply Yes to their data alert to make a plan change. The plan change is backdated to the beginning of the customer's bill cycle, and moves the customer to the next tier of MORE Everything pricing within the same plan category.

        Hello RheaW, you pose an excellent question! After further review, there are currently no reports or outages with the alert system. When they replied yes, did the message go through completely? Do they have any premium messaging blocks? Keep us posted!
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Excel client does not work

    as i try to open a dynamic template or evdre screen we get the following message "evdre encountered an error retrieving data from the web server" clicking "retry now" is resulting in same message only after clicking cancel option a template is built.
    but in this case we are not able to send data and get the following message "empty casheno data to send"
    any idea what the reason can be

    tried it again and realised that current view was not properly selected and our apshell had some empty dimensions.
    after we filled these dimesions and selected all base members of other dimesions the problem did not appeared again.
    it is about mastes data but i will let you people know if this problem continues or another solution fits for this issue.
    best regards
    and
    thanks for helpful advises

  • Boot camp 3.2 windows xp keyboard wire does not work key volume and brightness, etc.

    I bought today a new apple keyboard with wire.
    The old keyboard had a broken button, but the control keys f1-f12 all worked with both os mac or os both windows.
    Now I change the keyboard, but I do not work anymore keys f1-f12 under Windows XP, but they work under Snow Leopard.
    I updated bootcamp in XP until version 3.2, but the problem remained.
    What can I do?
    best regards

    Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

  • Webmail worked, Enabled virtual host, now Webmail does not work! HELP!

    Hey all, hope this is an easy one. I had mail, and webmail up and running for my main domain. www.example.com. and mail.example.com. I enabled virtual hosting under mail and added the local host alias for my second domain. www.example2.com. Users can now receive email sent to [email protected] Sounds good right. Well now my webmail server does not work, and whats worse is it brings up a list of the directory!!! Any ideas on how to get that back up?

    ok, I changed the default index file to index.php, and now I can bring it up and login, but get an error where the folder list usually is...
    ERROR:
    ERROR: Could not complete request.
    Query: CREATE "INBOX/Sent"
    Reason Given: Invalid mailbox name

  • Why i am unable to format text in italics?

    why i am unable to format text in italics?

    Type Command-T to open the Fonts pane. Regular, Italic, Bold, etc will be listed in the Typeface column.
    Walt 

  • My keyboard does not work properly when texting etc

    Hi All
    My keyboard does not work properly on my Iphone 4 when texting, it brings the wrong letter or wont let me choose the one i want.  Anything i can do to correct this or is it a visit to apple?
    Cheers for any support in advance.

    I have rebooted and synchronised it with the mac.  I dont even have to touch the screen now and some letters get picked up.

Maybe you are looking for

  • How to apply background color to link button in Flex 2

    I need to apply background color to link button as the Rollover color has  on its over event.How is this possible in Flex 2 ?I am using the above  in Xcelsius as custom component so if I apply graphics and draw rect  method it does not have any effec

  • PDF of Project File adds lines to the bottom

    When doing a PDF of a Microsoft 2007 project file, the PDF version has a bunch of lines added to the bottom. When printing the project file to a printer, these lines do not show up at all. I have tried it both in Std and Pro with the same results. So

  • How do I turn off message preview?

    How do I turn off message preview on the update 5.1.1? It's not in the usual settings and message options.

  • Bapi 'bapi_acc_document_post'.

    hi all, i'm creating credit memo request thru bapi 'bapi_acc_document_post'. i'm getting success message for creation of cmr(it is also updating the table bkpf) but i'm not able to get the document number for created document. can ne 1 suggest me how

  • Check newline character in data

    Hi, How to check for a new line character in data using SQL query ? Thx