Formatting the Nano for Windows

I originally had a mac, however I've just bought a PC, and am wondering how I reformat my nano so that it's compatable with my PC. I tried just plugging it in and it didn't work. Is there something I can download?
Thanks

You reformat by restoring the iPod.
See: How to restore the iPod to factory settings.

Similar Messages

  • Boot camp does not format the partition for Windows 7

    I recently purchased a copy of windows 7.  This is the full version.  I downloaded the drivers to a usb drive then placed the windows 7 disk in my apple optical drive to partition to disk.  After portioning the iMac restarts and gives the a blank screen with _ blinking.  It seems as though the windows partition has not been formatted.  I cannot enter a dos command such as format or anything else.  If I start up the mac again with the windows 7 disk in the optical drive I will be prompted to insert a bootable disk.  I understand that after the partitioning takes place that bootcamp should start the installation process.  By the way after working on this for quite a long time I decided it might be the copy of windows so I returned it and got another.  Same resuts.  I hope someone can help.
    Thanks

    Read the instructions and it is pretty clear that you format to NTFS where you see the BOOTCAMP partition.
    All the articles and how to are here:
    http://www.apple.com/support/bootcamp
    Boot Camp 101

  • Problems formatting the partition in Windows XP

    I'm trying to install Windows XP Pro (SP2, OEM version) through bootcamp. I partition the hard drive (115gb) using the assistant and then start the installation. I get the screen that asks me to select the correct partition and I choose "C: Partition 3 <BOOTCAMP> [FAT32]". However, according to the bootcamp installation guide, I should then see a screen that allows me to format the partition for Windows XP where I can select "NTFS (Quick)". The problem is, I'm not getting this screen. After I choose "C: Partition 3..." it jumps straight into the install and I never have the opportunity to format the partition. Any ideas on whats going wrong?

    Hi and welcome to Discussions,
    with newer Windows CDs/DVDs there seems to be sometimes a problem with the needed re-formatting during installation.
    Here's a solution for such problem comes up: http://discussions.apple.com/message.jspa?messageID=9771900#9771900
    Regards
    Stefan

  • Systemupda​te40-2009-​10-19 -- Where is the support for Windows 7?

    I am about to rebuild my X201 Laptop with Windows 7 Ultimate x64.  I downloaded systemupdate40-2009-10-19.exe and systemupdate40-2009-10-19.txt.  The txt file is extremely poorly formatted for notepad.  It is one long line.
    Also, from what I can make out in the description at the begining of the file it only has support for XP, 2000 and Vista:
    "ThinkVantage System Updatefor Microsoft Windows XP, Windows 2000, and Windows Vista"
    Where is the updater for Windows 7?
    Solved!
    Go to Solution.

    Use the new one:http://support.lenovo.com/en_US/research/hints-or-​tips/detail.page?&LegacyDocID=MIGR-61432#update
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • HT5628 Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned."  Huh?

    Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned."  Huh?

    You must use the Windows formatter to format your Windows partition NTFS. Please be sure you select the Windows partition otherwise you might end up formatting your OS X partition NTFS.

  • How to change the icon for 'windows group' in Java 1.6 [Windows XP] ?

    Hello,
    I was wondering if there is a possibility to change the icon for 'windows group' in Java 1.6...
    I'm using Windows XP SP2. Now the windows from my Java 1.6 application are grouped with the standard Sun icon [screen below] on the group.
    http://img382.imageshack.us/img382/8995/iconbl1.png
    I would like to change the icon for my own. Is there a way to do that ?
    Please help.

    Whichever icon I use for the main frame (I tried few), after grouping the main frame and other sub-frames the icon is changed to standard 'Java Sun' icon as you can see in the screenshot from my first post. The problem occurs only when frames are grouped, when the are separated in the task bar their titles and icons are ok...
    So how can I change the icon/title for the group only (for Java 1.6 in Windows XP) ?

  • Problem with ipad 2 safari cannot download the file for windows live photo gallery

    on ipad 2 safari cannot download the file for windows live photo gallery

    What you can download via Safari on the iPad is very limited - you can only download apps from the iTunes app store on your computer to sync to the iPad, or from the App Store app directly on the iPad

  • Acrobat Standard XI, but can only find the CD for windows.  I have a mac (I have access to an external CD drive and I have the product keys for windows).  What is the best way for me to install it?

    Hi, I purchased Acrobat Standard XI, but can only find the CD for windows.  I have a mac (I have access to an external CD drive and I have the product keys for windows).  I have never installed it anywhere else.  What is the best way for me to install it?

    Hi lintonm86921521,
    I can understand your concern & will guide you through this.
    I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
    You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
    In case if you have any further query please let us know, we will be happy to help you.
    Regards,
    Aadesh

  • After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

    After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • TA38633 is it possible to avoid having to do a "restore" entirely ? Also if i have to do a restore, i have windows 7- do i follow the steps for Windows XP?

    Regarding error 1601 - is it possible to avoid having to do a "restore" entirely ?
    Also if i have to do a restore, i have windows 7- do i follow the steps for Windows XP?
    Many thanks

    I'd refer to this
    http://support.apple.com/kb/TS3694 (talks about security software and this error)
    and this
    http://support.apple.com/kb/HT1414
    I've had Windows 7 for a while, but it seems the steps in iTunes are identical. 

  • Windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.

    windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.but still dey show up

    Whaat version of Mac OS X?
    When do the windows show up?

  • TS1389 I keep getting a message telling me my ipad cannot be synced because my computer is not authorised for items purchased on this i pad. I tunes tells me it is authorised and o have follewed the sugestions for windows 7 and it stil wont sync.

    My ipad wont sync when i try to put old apps back on, it tells me my computer is not authorised for purchased items for this ipad. I have followed the steps for windows 7 but it stil wont sync. I tunes tells me the computer is authorised. What can i do?
    Cheers pete.

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please?

    When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please? What can I do to solve it?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

    I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

    Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
    I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
    Thanks to BobTheFisherman for the link.
    There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
    Give it a try. You might like it or it may not be your cup of tea.

  • I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

    I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

    You won't find them until you are in Windows.
    Helps to read even print the guide.
    If you have auto run enabled, which is a security risk, the Apple setup.exe will run.
    Otherwise, just run that.
    Either use your OS X DVD, or use the drivers downloaded by Boot Camp Assistant.
    Two different ways to get them.

Maybe you are looking for

  • DNS over VPN

    Hi community, I am having some trouble with dns over vpn. On server side of VPN the dns is working 100% i.e servername.domain.com resolves to local IP address correctly from within network. However, when i connect into network over VPN the dns does n

  • SuperDuper kills only Crucial M4 SSDs or all the brands?

    Today I have bought a Crucial M4 SSD 2,5 512GB to replace my MacBook Pro HD. I connect it with usb to sata cable to my Mac, format it and begin copying the data using SuperDuper. 5 minuts later I get an error, the drive is ejected and from that momen

  • Launching Multiple Processes With JWS

    Is it possible to launch multiple processes with JWS? I'd like to specify in the jnlp 2 applications to run. Each application must run in its own java.exe process. Why you ask? I've created a mission critical application in JWS that requires the appl

  • Newbie Technical Issues

    Hi, guys. I just signed up a few minutes ago and I am the proud owner of an 8320 Curve, my very first Blackberry. Being new to all this, I have run in to some technical difficulties and I hope you experts can help me. 1. I downloaded a third party ap

  • 2 Login Pages in single realm

    My question is really for Sun AM 7.1, but I am sure the answer for OpenSSO will be the same. Is it possible to have 2 different login pages within the same realm? I have a scanario where I have 2 different user types existing in the same directory, b