Formatting the printer output.

Hi,
i'm trying to format the output of the EPSON LQ-870 dot matrix printer to print the output in th paper size height 280 mm & width 210 mm.For the first page the header is coming correctly.Burt for the second page the header is coming little down from the required place.This page size is little bit less than the normal A4 size.I'm thinking that is the reason for the misplacement of header in second page.How to rectify this?
Thanks in advance.

Hi Mike,
That is odd.... What happens if you check on the No Default Printer, save the report and then check it off, or the other way depending on what your original setting is?
If you create a new report do you see the same results?
Also, XI is no longer patchable but you can upgrade to XI R2 for free. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
To enable the full XI R2 features locate the Keycode link and get a new one for XI R2.
Thank you
Don

Similar Messages

Item text is not appearing in the print output through IDOC?

Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
    idoc_data-segnam = 'E1BPMEPOTEXT'.
    e1bpmepotext-po_item = Po line item number .
    e1bpmepotext-text_id = txtid.
    e1bpmepotext-text_form = textform.
    e1bpmepotext-text_line = line item text .
    idoc_data-sdata = e1bpmepotext.
    APPEND idoc_data.
    CLEAR idoc_data.
    CLEAR e1bpmepotext.
please help me it is urgent
Thanks
Venkatesh

Hi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra.

Wondows are getting blackened on the printer Output in smartform

HI ,
whenever i see the print preview of the form output its looks fine o me ,but when i am printingt on printer its "Blackening few windows" which has got headers in it.
Cna anybody let me know th solution for this.
Thanks in advace,
Nitin

Hi everyboy,
I have the same problem. I create a smartform and print preview in screen shows all data and windows ok, but we try print in two differente printers and shows black windows.
I already change headers color but printing did not change, when I change saturation to a differrent percentage print with dot points in the area but cant print with solid color in cell.
Is there any idea to solve this? I download the form to have a backup, this action could affect some format in the form?
Thanks in advance,

Why is the print output including spaces between every letter?

All printed output has spaces between each letter. Example:
A l l p r i n t e d o u t p u t h a s s p a c e s b e t w e e n e a c h l e t t e r .

Caused by a Bug in 4.0b12, Was fixed in the 02-28 nightly, and the fix will be in the 4.0RC version due to be released next week.

Control the printer output tray

Hi,
Is it possible to control the printer tray that JetForm prints to?? We have a single printer with multiple output trays, where we want to print one form to tray 1 and a different form to tray 2.
Any help would be appreciated.
Regards,

Hi David
There are different ways of controlling the output trays:
1. add -ato[traynumber] to your job line
2. add -ato[traynumber] to your task
3. add ^trayout [traynumber] to your data stream
4. add ^trayout [traynumber] to your preamble
Be aware that printer manufacturors are using different tray numbers.
Ståle

Reg:Issue with PO & frieght for the Print output

Hi
I have scenario
I created a PO for a material which has 100 inr also the PO has got the frieght charges of 50 inr for different vendor
Is there by any chance can i have the print for the both of these (material & frieght) seperately with same PO number itself
Is there any provision available will it be possible thru partner schema if so how or welcome for any other solution.
Regards
VKK

not answered

I recieve my reciepts from all of my Apple purchases via email to my email cllient "MS Outlook 2003" on a Windows 7 Home Premium platform. I cannot format the print appearance of HTML documents within Outlook and the print border cuts of the last digit?

I use MS Outlook as my email client under Windows 7 Home Premium and when I receive a reciept from Apple for purchases made for my iPhone (Stores or iTunes) the HTML formatting cuts off the last digit of the price paid on my eReceipts (the only receipts I get). Outlook 2003 does not allow for HTML print formatting since they (HTMLs) are formatted from the source (Apple). Can you help me to get Apple to fix this or find a workaround?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Enlarging the print output

I PDF'd a Word document and wanted to print it as a booklet. The problem is that when printing 2 on a page the margin increased another 1 inch. Now what was only a one inch margin appears to be almost a 3 inch. I tried fit to print and it did increase the output but now it has a 2" margin. HELP please.

Note the "Size" read out on the crop popup this tells you the size your cropped image wil be. eg. The image here is a 21 megapixel image, cropping the image like so reduces the file size to 5MP, your exported file size can only be a max of this 5MP.
Hope this Helps, (HTH)
Tony

Colors are mismatched between photo and printed output. The printed output's tones are off.

This is an HP Photosmart Plus B210A printer.
I have almost-new print cartridges installed (correctly).
I have done a print quality test and the test page seems to be very good.
The paper I'm using is high-quality photo print paper.
I'm using quality setting of 'best'.
Thanks in advance for any advice.
This question was solved.
View Solution.

If it is not a hardware issue, then go into the printers folder, right click on your printer, then select properties. Select the color management tab, you can adjust colors from there.
This document below would apply to the hardware end of it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02142902&cc=us&dlc=en&lc=en&product=4021935&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How do u input the printer output into labview and display the data?

Hi, basically when a program has done running the program prints a page of data. basically i want labview to read this data from the parallel port of the pc, display it in labview or be able to pull the data apart and put it where i want. any ideas, be much appreciated.
thanks stuart

Basically, what you need is to access the pins of your PC�s parallel port
The function that you need is located at: �Advances/ Port I/O /inport� of your function palette.
You might want to read the following documents before programming. They will help you a lot (specially if you are using WIN2000 or later OS that has a kernel stucture, you need to download the and used inport.vi of AccessHW.zip for your program to work)!
Using the Parallel Port in LabVIEW
http://zone.ni.com/devzone/conceptd.nsf/webmain/72C6FC6CE4AD4D1386256B1800794596?opendocument
IEEE 1284 - Updating the PC Parallel Port
http://zone.ni.com/devzone/conceptd.nsf/webmain/0989D3D9DAFAE64E8625680400679736?opendocument
Port and Memory Utilities for Windows
http://sine.ni.com
/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DEBD56A4E034080020E74861&p_node=DZ52058&p_submitted=&p_rank=&p_answer=&p_source=External
Best,
USCTROJAN

Scrolling is disabled on the Print Output dialog

Please fix.

Good evenong,
Perhaps all informatio is yet present on screen and do not need to be scroll?
Patrice

Email Sending of Purchase Order Created versus Print Output

Dear All,
I have been successful in sending the Purchase Order created as a PDF Attachment in email.
The problem i am facing is in the formatting of the attached output.
The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
I am not able to find the reason for the difference.
Only because of this reason, my delivery is on hold.
Please guide me on how to find where the difference could be and how to rectify it.
Thanks & Regards,
Bhavika

Could you tell us which fonts you tried?
What device type did you choose? (SPAD transaction, select your output device to determine the device type)
Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font)

CP5 and Print output

I'm packaging some PPTs used for ILT using Captivate. The package is going to include an .exe version and two handout versions. One for students and one for instructors. Has anyone attempted to add or modify the templates for the print output?
I've just tried to use the Handout Template and it has everything scrunched in the center of the page.
When I use this as a handout for students I'd like the graphic more over on the left and more room for longer lines on the right for student notes.
I'd also like to use the handout format with the slide notes for an Instructor's Handout.
Any help would be appreciated.
Thank you,
Susan

Susan then asked, "Since I've not written macros do you have a good source for learning how?" and I sent the following reply:
"Try this link as a starting point: http://msdn.microsoft.com/en-us/library/dd721892(v=office.12).aspx
However, I must forewarn you, to customize your Captivate documentation your macros will probably need to manipulate images, resizing and/or repositioning them. For that, you will need to learn how to use Visual Basic for Applications (VBA) to manipulate Microsoft Word's "Shapes" and "InlineShapes" collections. Initially, all the slide images in the Word document that Captivate produces are inline shapes, attached to the Word paragraph in which they occur. You can resize an inline shape, but you can't reposition it directly. You can either adjust the position and alignment of the paragraph to which it is attached, or you can convert it to a regular Shape whose position can be controlled independently of nearby text. The following procedure is one I use to position the first slide by itself on the first page of the Word document:
Sub FloatPicture1()
    Dim iSlideCount As Integer
    Dim oILS As InlineShape
    Dim oFloatingShape As Shape
    iSlideCount = ActiveDocument.InlineShapes.Count ' this line just shows you how to find total number of pics in the document
    Set oILS = ActiveDocument.InlineShapes(1) ' this line sets up a convenient reference to the first picture in the InlineShapes collection
    With oILS ' the "With" to "End With" block lets us do multiple actions on the referenced object
        .Select ' If we hadn't done the "Set oILS" and "With oILS" steps, we would have had to type this line in full as:
                    ' ActiveDocument.InlineShapes(1).Select
                    ' and the following line as Set oFloatingShape = ActiveDocument.InlineShapes(1).ConvertToShape
        Set oFloatingShape = .ConvertToShape
    End With
    With oFloatingShape ' Now that we have floated the shape, we can set its position
        .RelativeVerticalPosition = wdRelativeVerticalPositionPage           ' these settings control how word will interpret
        .RelativeHorizontalPosition = wdRelativeHorizontalPositionPage    ' the .Left and .Top values that follow.
        .Left = CentimetersToPoints(2)
        .Top = CentimetersToPoints(6.5)
    End With
    Set oILS = Nothing ' just some VBA housekeeping here, now that we have finished with these objects
    Set oFloatingShape = Nothing
End Sub ' FloatPicture1"
By the way, note that when we converted InlineShape #1 to a floating shape, that would have reduced the count of InlineShapes by 1, and what was previously InlineShape #2 is the new #1. Your code may sometimes need to take that change of numbering into account.
Trevor

Printer output incorrect/too small after upgrading to VS 2010 Crystal

I have a Windows Form application that was originally written using .net 3.5 and the version of Crystal Reports that came with Visual Studio 2008. When the VS 2010 release of Crystal Reports came out, I upgraded the application to .net 4/VS 2010 and the new Crystal release.
This application prints checks on blank check stock, so alignment of the output has to be very exact to print the checks correctly. It prints the reports using the PrintToPrinter() method of the ReportDocument class.
In the original version of the program, I had everything aligned correctly in the check report. After updating the application to the latest Crystal release,but making no changes to the report itself, I noticed that the alignment of the checks report was incorrect.
After comparing the output, I was able to determine that the new output is slightly shrunk compared to old output, almost as if it is scaling the report in some way.
I opened the report in the new report designer and verified that all page size and margin settings were correct/the same as before, and they were. The printed output is smaller than it should be based on how the report is designed. I tried adjusted the paper size, and also tried the "Dissociate Formatting Page Size and Printer Paper Size" to see if I could somehow adjust for the scaling, but nothing I tried was successful.
Our check printer is a HP LaserJet 5Si. During my investigation into the problem I discovered that if I printed the report to a pdf printer (PDFCreator) the resulting pdf did not have the same scaling/shrinking problem that I get when the report is sent directly to the LaserJet. I also printed a page from the pdf to the LaserJet using Acrobat Reader, and the output was as I expected it to be.
I only seem to be seeing the scaling/shrinking problem when I send the report directly to the LaserJet. Is there some new setting that I'm overlooking that would be applying some sort of report-wide scaling? Any other ideas as to why this is happening?

Looking for HP LaserJet 5Si at the HP website:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25478&taskId=135
I notice that there are several different types (hm, mx, nx, ...). Also, there are different drivers, depending on the OS.
Ensure that you are using the correct driver (hm, mx, nx, ...) for your printer and for your OS and that the driver has the latest updates from HP.
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Customize Print Output in CP6?

Anyone know how to customize the print output? RIght now, I have to delete and replace things in order to use the Word output.
In these forums, there are links to directions, but the links don't work.
Thanks!
Micky

The handout template is hard coded. But, working with the other templates and the Word Output document, I was able to create a template that will allow you to publish the Word images and slide notes in Word. And, you can customize the placement on the page and image sizes.
Here are instructions (I'm using Captivate 6 BTW):
1. Make all of your slide notes into closed captioning.
I was able to find the computer code to call the closed captions, but not the slide notes. So you have to drop some audio onto each slide (I'm using 1 second of silence generated in Audacity) and click the button that will turn your slide notes into closed captions. Don't worry...these won't display in your published project unless you have your skin set to display them.
2. Open a new Word document.
3. Copy and paste the script below into your Word document. This script as is will print 2 slides per page with slide notes above the images.
[CPDefaultItemTemplates[CPTemplates[TIMEBLOCK[CPContentInsert]TIMEBLOCK]CPTemplates]CPDefa ultItemTemplates]
[CPCapturedSlide
[CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates]
[CPSlideImage][size:282x214]
CPCapturedSlide]
[CPContentSlide
[CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates]
[CPSlideImage][size:282x214]
CPContentSlide]
4. Adjust the script to your liking:
     1.   Change the image size. This is set to 282 x 214. But you can change the image size to whatever you want it to be. If you make the size larger, fewer will fit on a page.
     2. Move the slide notes, if you want. This is set to put the slide notes above the images. To put the notes below the images, move the [CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates] to below [CPSlideImage][size:282x214]. Be sure to move both instances, and don't copy/paste...move!
     3. Use Word's formatting options to change the page display. For example, if you use Word to center the code about slide images, the slides will be centered on the page when you publish. You can add your company's logo in the header. Type CPMovieTitle into one place to print the project title...either header or footer. It won't work if you put it in more than one place for reasons known only to Captivate. You can put page numbers or dates in the footer. You can change the font for the slide notes by highlighting the notes code (see #3 above) and making it larger, smaller, different, bold, italic, etc., etc., etc. Whatever you would do with Word to format your handouts, do in this document.
     4. Add anything that you want to print on every page outside the [   ] blocks. For instance, if you want to blank lines to print under the notes, you can add before the code for the images.
5. Save the Word document in .doc format with a memorable name where you can find it. You don't have to save with the templates in the Captivate program file.
6. Publish to Print. In the upper, right corner, in the Type section, click the button with ... It's to the right of Handout. That will open a window which will allow you to browse to find and select your Word document. The Layout Options won't do anything, so no need to mess with them. Set the rest of your settings...like project title and publish location and publish.
Things that I don't know, but would like to:
1. Will this work in Captivate 7? Will someone try and let us know?
2. Can you save the Word file in .docx format?
3. Can you set the Word doc to landscape instead of portrait? (I'll bet that you can, but haven't tried it.)
4. What Word options won't work? I know that you can't put this code inside a Word table. Using column and page breaks, I got mine to print with the slide notes on the left and images on the right. Other than that, who knows? Word is a big program, so you'll just have to test.
5. What is the code to call the slide notes? I've called Adobe support twice and can't get a straight answer. If we all start calling and emailing, maybe they'll tell us.
So, I hope this helps. There are so many threads about this and I can't repost everywhere. So, please link to this thread if you see another one where this info will help.
Happy printing!
Rebecca

Formatting the printer output.

Similar Messages

Maybe you are looking for