Formatting with AVCHD

Does final cut express format h.264 and 1920x1080. Also does final cut express compress AVCHD files. I hope not. Have not bought yet.

Does final cut express format h.264 and 1920x1080.
I'm not quite sure what you mean by this?
Also does final cut express compress AVCHD files
AVCHD is already compressed. When you import those files with an appropriate Mac the files are actually blown up using the AIC codec.
Around 40 gig an hour.
Al

Similar Messages

Burning DVD with AVCHD format on Final Cut Express

Anyone knows how to export the edited file in the highest/closest quality of AVCHD on a DVD media? I tried all output and it seems the AVCHD quality is still superior when played in my Sony BD350 Blu-ray player. Thanks!

Hi(Bonjour)!
Here's my workflow to produce Blu-ray format DVD:
I shoot in HDV and edit into a 1080i60 AIC sequence. This process should work with AVCHD too.
Save the movie to quicktime. No conversion.
Drop the movie into toast with the HD plugin installed...(Toast 10 is available now)
http://www.roxio.com/enu/products/toast/plugin/overview.html
I burn a maximum of 20 minutes on a single layer DVD at 1080p in blu-ray tab in toast on my G5 2.3 dual 4.5 Go Ram, dual layer factory installed DVD burner.
Sorry, in my tests, menus are designed by roxio and there is issue with them and the looping feature, so I stay with the autoplay no menu. The latest PS3 firmware update may solve this issue.
I play the blu-ray DVD on a Playstation 3 perfectly.
You can also burn DiVX format in toast, but the res is limited to 720p. I encountered some playback problems with this format, but it is okay on PS3.
See those link about Blu-Ray authoring, they give a general idea on the workflow and option for BR burners and players:
http://www.kenstone.net/fcphomepage/taming_the_wildblu.html
http://www.kenstone.net/fcphomepage/taming_the_wild_blu2.html
http://www.kenstone.net/fcphomepage/blu-ray_fcpfields.html
Michel Boissonneault

Does iMovie work with AVCHD format on mac book pro 10.8.2

Does iMovie work with AVCHD on mac book pro 10.8.2? Getting quit unexpectedly error, after 25 minutes of using.

Check to make sure that your TV is set to the HDMI input that you're using.

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Capture HD with AVCHD apple intermediate codec

I have captured video from my Canon xha1 previously. Today I went to capture some video. I have my presets to HD with avchd apple intermediate codec. When I go to capture I receive the message "capture preset must have video or an audio digitizer set to capture. Please change the desired preset in the audio/video settings. I go back to system settings and the "audio capture" is not highlighted. I'm not sure if this is how I set the capture preset or if there is something else I am looking for. Any advise is greatly appreciated.

Hi Tom,
The camera settings are on HDV/DV. I haven't changed the setting, that I am aware of. I have tried a few easy set up settings. Last night I set to all formats and HDV. I was able to import video but not audio came through. I also tried HD with HDV or AVCD and received the message about needing a digitized audio preset. Today I received the message my deck could not be recognized. I loaded the footage into imove hd just to check my firewire. Video and audio both came through. Interestingly enough when I tried to import an imovie hd into fce, I received an error message. So my problem went from bad to worse. The other devices connected to my imac is an external hard drive and a printer. In the system profiler my camera is listed under the firewire device tree.
I am going to call Apple again tonight. I have only had this machine a month. So I am not very experienced with what can go wrong. But I guess I'm learning. By the way I have enjoyed your tutorial. I have learned a lot.
Thanks,
Jamie

Premiere Elements 9.0 no sound with AVCHD

Hi all I'm trying to work with a new camera that I bought (primarily for stills, but the HD video is so good I'd like to use with prelements) which is the Panasonic Lumix FZ35 U.S model but when adding a AVCHD file form the camera on to PC and then into elements the video looks fine but there is no sound channel.
I've tried changing the extension to the file (.MOV) but the same problem remains.
I can switch the recording format to Motion Jpeg but the files are huge and vastly reduce my recording time
I'm wanting to know if A) these files can be easily imported into PE or B) if there is a way of converting (hopefully not a lengthy process) and how best to do it without loss of quality.
Any help or advice on this would be great.
Thanks in advance
Jon

It looks like that camera records in AVCHD Lite, and that the Audio is recorded with DD Stereo processing, and I would guess that it uses a single mic, but processes the Audio to simulated stereo. What I could NOT find from the specs. page, was exactly what format/CODEC is used for the Audio stream. I can only guess that it is DD AC3, which should Import fine into PrE. May be that I just missed the Audio spec.
What Project Preset did you choose?
With AVCHD (and possibly AVCHD Lite), one should have the choice of either stereo, or DD 5.1 SS. In this case, I would choose the stereo option.
When you Imported the footage, did you wait for PrE to Conform the Audio fully? This ARTICLE will give you some background and some tips.
Also, there are a couple of things to consider with Audio.
Can you hear Audio in other programs?
Can you hear Audio in PrE with other source files?
Can you see the Audio portion of the Clip, in an Audio Track in PrE? Note, depending on how one has set up the Project, one may have to use the Scroll Bars to find this, when in Timeline View Mode. The Scroll bars are to the far-right of the Timeline Panel, and are not easy to see.
Let us know about your Project Preset and the Conforming process. Then let us know about the general Audio on the system and in PrE. This ARTICLE will give you some things to check out, but those will depend on the answers to those general Audio questions.
Good luck,
Hunt

Workflow questions with AVCHD footage

I copied the entire content of a SDHC card that was shot with an AVCHD camera to a folder on my desktop. I just used the Media Browser in CS6 to double click on the files to view them. I'm coming from Final Cut Pro where I had to convert all of these files to Pro Res 422 before being able to edit them.
1. Do I just leave the content of this folder as is? Do I need to do anything to the files before editing them? So if I start editing clips from this card after opening them in the Media Browser, and assemble clips in my Timeline and then export, is that all I need to do?
2. If so, to number 1, then after every shoot I would just copy the entire content of a card to a folder on my hard drive and just leave it there until I'm readt to edit it, and after I edit it the folder structure and contents of the card remain the same?
Thanks.

Jim Simon wrote:
With most cameras, material shot on different occasions (possibly days) will each be in a separate folder, within the main folder structure.
With AVCHD, it doesn't work that way. It all goes into the same fodler regardless of when it was shot.
If you shoot something you don't need, the best option in general is to just leave it there anyway.
For organizing different projects, always format the card in the camera before a new shoot. Or use a different card. In other words, don't mix projects on the same card.
Sorry Jim, I hate to take issue with you, but that is not the case with my Canon AVCHD camera. It behaves just as I described in my post. The AVCHD video *.mts files, together with matching *.cpi files are contained within a folder for the day's date inside a TVD_ACHD folder.

Choppy and Dropping Frames with AVCHD on FCPX

Hi,
I'm having a nightmare problem with AVCHD on my Mac Pro and FCPX.
So I'm editing with 1080 60p from FS700, NX70, GoPro Hero3 and XR-550V.
Imported without transcoding first, so just a rewrap into QT.
Tried to play a single clip in the events or timeline in this conditons:
- "Use original or optimized media" > High Quality
- "Use original or optimized media" > Better Perfomance
- "Use proxy media" (and did a transcode only for 4 clips to test)
With all those possibilities it ALWAYS plays choppy and dropping frames.
Playing in the QT (PRIVATE and choosing the clip) plays normal.
Playing in the QT proxy transcoded from FCPX plays normal.
Using Premiere CC is also normal.
Tried to ensure that the timeline is 29.97p, same thing (dropped frames choppy).
What could it be?
Specs:
FCPX 10.0.9
Mac Pro Early 2009
Original Material in a RAID0 ~220MB/s R/W
Processor 2.66 GHz Quad-Core Intel Xeon
Memory 7 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GT 120 512 MB
Software OS X 10.8.5 (12F45)

Well, it's possible for FCP to find something about either your hardware (or a third party software) problematic and for Pr to be OK with. Premiere has long been more agnostic about formats and codecs than FCP.
Unsure what to suggest. It shouldn't require the latest-greatest ;for example, we have a four year old MBP, running Lion that can play 1080 AVCHD smoothly… although we set Preferences to better performance.
Russ

How do I import music from a flash drive that was formatted with a windows PC to my MacBook?

How do I import music from a flash drive that was formatted with a windows PC to my MacBook - the drive is showing it has over 3GB of info on it but none of the files are showing up in finder? I had backed up my iTunes library on the flash drive about a year and a half ago before I switched from a dell to a MacBook pro.

What I found works for me is to make sure iTunes keeps the music files organzied in the iTunes Media folder according to album, artists, etc. and that it copies the music files there when adding them to the library. That way, if something happens to the library, the raw files can always be re-imported again.

Invalid export DLL or export format" with Crystal Reports 2008 to Excel xls

We are experiencing the same issue as reported in the sticky thread. I answered in that thread, but thought that I woudl open a new thread to keep track of this issue. I can give you the responses to your questions you have requested in that thread:
Server Operating System - MS Windows Server 2003 R2 Enterprise Edition SP2
Version of the .NET Framework - MS .NET Framework 3.5 SP1
How did you deploy? - Installed CR 2008 SP1 runtime with msi package
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size? CRRuntime_12_1_mlb.msi dated Sept. 16, 2008 12:55:00 PM, size: 56,717,824 bytes
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory - File was created 9/13/08 11:21AM, 9451KB File Version: 12.1.0.882
How many libpng10.dll files are on your system? List all instances. - 1 instance is on the system located in C;\Program Files\Business Objects\Business Objects Enterprise 12.0\win32_x86 directory. It is dated 9/13/08 8:52:26AM 132KB version 1.0.30.1
Any additional comments - We have tried to export to PDF and this works successfully. However, we can not export to xls or rft formats.
CRXF_XLS.dll is 905KB 9/13/08 9:38AM Version 12.1.0.882
CRXF_RTF.dll is 509KB 9/13/08 9:35AM Version 12.1.0.882
We also have the CR XIR2 server runtime installed side by side on the server as we migrate from CR 2008 to CR XIR2 SP4 ( where this function does work currently).
Please let me know if you need anything additional.
Phil
"Invalid export DLL or export format" with Crystal Reports 2008
Posted: Sep 27, 2008 12:36 AM       E-mail this message      Reply
I've included this sticky because we are seeing many posts in this forum regarding the error Invalid export DLL or export format when exporting to Excel and RTF in .NET applications using the Crystal Reports 2008 .NET SDK.
Issue
Exporting a Crystal Report to Excel or RTF format
.NET application using the Crystal Reports 2008 runtime (version 12.0)
error Invalid export DLL or export format
We've been doing some testing in-house and haven't reproduced this behavior. In order to figure this issue out we will need your help. If you are getting this error please reply to this post with the following information:
Server Operating System
Version of the .NET Framework
How did you deploy?
If you deployed with CRRuntime_12_0_mlb.msi - what was the date of the file and its size?
What is the file version of crpe32.dll on your server? You'll find this in the C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 directory
How many libpng10.dll files are on your system? List all instances.
Any additional comments
What We Know
The error invalid export DLL or export format may occur when exporting to Excel and RTF formats in .NET applications utilizing the Crystal Reports 2008 runtime (v 12.0)
Other export formats like Adobe PDF, Crystal Reports, CSV all export with no error
Some customers have resolved this by adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to their environment path variables
This may have something to do with the file libpng10.dll. Both crxf_xls.dll and crxf_rtf.dll are dependent on it.
Thanks in advance for your co-operation. We hope to figure out what is causing this issue soon.

Hi,
I am also having the same problem, except that I am not using Crystal Report 2008 runtime but the actual Crystal Report 2008 installation on Windows XP SP2 with VS Studio 2005 (VC++). MS .NET Framework 2.0.
Cyrstal Report XIR2 was installed on the same machine but uninstalled before installing Crystal Report 2008.
So only one instance of libpng10.dll and found in C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
Crpe32.dll        3/1/2008 version 12.0.0.683
Crxf_xls.dll       3/1/2008 version 12.0.0.683
Crxf_rtf.dll         3/1/2008 version 12.0.0.683
crdb_oracle.dll 3/1/2008 version 12.0.0.683
libpng10.dll       3/1/2008 version 1.0.30.0             122880 bytes
There is no problem for exporting to pdf, html, word, csv, Crystal Report. If I create a testing report without any data from database, the testing report can then be exported also to rtf and xls.
Oracle 11.1.0.6 is the DB for the reports.
Adding C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to the path did not resolve my problem.
Any idea to fix this issue?
Thanks
Kin H Chan

Is there a way of running cd's"windows" formatted with inf and swf files?

Is there a way of opening and running CD's 'window' formatted with .inf and .swf files on a mac??

In your operating system, move the photos to wherever you want them to be (keeping the folder tree structure the same), and then in Lightroom re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

How can i create a printable format with Java

Hello....
First, my english is not good, but this is possibly my last hope!! I have a program with EJB's, JBoos and a MySql database! The program shows the data from the database and you can do something with these data. Now my problem to print this data. I want create a formular which will be print! I've treid ut with docbook and the javax.print library.
The first problem is: with linux docbook works very fine. I transform the sgml-file in many formats with "db2pdf or db2ps......"
but the javax.print library don't find any printservice! I've J2EE 1.4.1 where the bug canceld from the earlier version!
So the next problem is: with windows the javax.print library works fine! I find the printservices and can print *.ps or *.pdf! But i can't transform the sgml-file in Postscipt or PDF!
I've tried to solve this problem for two weeks now, but without any success.
Now my Question is: have somebody experiences with this problem and can help me or is there another possibility to solve my problem!!!
Thanks
FIPS

seems to be important!
k, do this.
1. ur english is wonderful for a programmer, are u US :)
2. i will suggest u create an XML file.
then u can print it and do the hell with it.
so : java ==> XML ==> what ever u want.
and if u can also what ever u want ==> XML ==> java.
this works also fine.

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Aspect ratio problem with AVCHD in iMovie 08

I am importing footage from a Panasonic HDC-SD9 into iMovie 08. the footage gets in there fine and looks great EXCEPT that the footage (all shot in 16:9) is squashed a little bit. in the preview clips below, it looks fine, but in the player above (and if I export it as a Quicktime file) it is squashed slightly. there are black bars above and below the footage, and (I'm guessing) were the video stretched to fill the entire area, eliminating the black bars, it would be the correct aspect ratio. I've tried importing footage form the camera supposedly shot in 4:3, and the same thing happens.
I know that I can simply do a quick edit in imovie, export it, import it into final cut pro, and stretch it back. however, I'm worried about losing quality, and more importantly, I don't know the exact ratio, since I can't even figure out what imovie is doing to the video to make it squashed, let alone in what manner.
the footage from the HDC-SD9 is AVCHD, and I understand there is something about square pixels vs. rectangular, but I don't know much about it. I have tried every iteration of imovie's limited aspect ratio settings, and I can't get it to work. I know it's meant to work well with AVCHD, so I'm assuming I'm missing something fundamental and simple. (some box to check to let imovie know I'm importing AVCHD?) it's maddening to see the footage correctly in the thumbnails, but squashed for (seemingly) no reason in the playback. can you help me out? otherwise I am going to film myself holding something that is a perfect square, then import it to imovie, then export to quicktime, then import the quicktime file into finalcut, then stretch it til the rectangle becomes a perfect square, and write down the settings for the future. seems ridiculously complicated, especially for the mac world.
I love imovie 08 (seriously, some of the new toys are just so amazing, and no render time at all!), and I love this camera. please tell me they can get along!

I think I'm having a problem similar to this. I'm using a Sharp MiniDV camera, and shooting in 16:9. When I used to import to other versions of iMovie it worked fine, but w/ iMovie 08 it is squashing and stretching the incoming video to more like 20:9 (I have no idea what the actual ratio is, this is just a guess). I tried changing import to PAL 25fps, but that didn't do any thing. Any other suggestions?

Can I backup to an external hard drive that has been formatted with windows?

Hi, I am fairly new to mac. I was wondering if I can backup my mac book pro using time machine to an external hard drive that has been formatted with windows. Time machine is saying it must erase to the hard drive in order to do a backup? Please help.

No it has to be formatted for OS X. Mac Extended (Journaled).

Formatting with AVCHD

Similar Messages

Maybe you are looking for