Formlevel Validation properties are not working when stitching the XDPs

The form validation settings are not coming in merged PDF document.We are using Adobe LiveCycle Designer 9.0
We changed the Form Validations settings, 'Configure how Acrobat displays validation message boxes', to 'Don't show any message box at all' in our XDPs. It is behaving as required when we tested them in individual PDFs.
In our project, it is required to merge these XDPs to a single PDF document. We are stitching the XDPs using the assembler by providing the DDX file. We are getting the default behavior , 'Show every message........', it is showing error message for each field.
Please help us to corect this.
Thanks in Advance,
Shabeer

Hi Poornachandra,
I tested the same formula in my environment for uploading the videos in Site Assets library, however the validation worked fine.
This error may be caused by some other reasons. Could you please provide more error message in ULS log for further research?
To narrow the issue scope, I recommend to test the validation formula in another library and then upload a video to the library, then compare the results.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

My previews are not working when I make adjustments

My previews are not working when I make adjustments?
I am wondering why this may be?
I just bought the program like 1 week ago too :-(
Any ideas?

What kind of adjustments are you making? Where are you looking for the previews? If you're using select list of filters or color adjustments, have you enabled 'Preview' in the dialog box?

My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods, if not why are both not working doing the same thing right after unplugging from pc.

Can an ipod get a virus from a pc that has a virus. After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod, if not why would both ipods not work and be doing the same thing? When trying to click on a game it just stays on the main screen.

- I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
- Try resetting the iPods. nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you hve problems with one game? The same game on both iPods?
Other apps?

1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

Hi. please solve my problem.
.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
thank you in advance.

Hi Ersin,
Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform. However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module. I can think of no reason why the different calling method would be a factor.
When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
Regards,
Nick

Scrolling effects in Muse are not working properly with the Chrome browser at the moment.

My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com

We are using Vertical spry menu bar features provided with Dreamweaver CS3.
You are using Spry 1.4.
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4.
When using Dreamweaver CS3 (uses Spry 1.4), it's wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
If after that you still have problems, please come back here.
Ben

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

Finder not working, when click the infinity sigh comes, can't open any file

finder not working, when click the infinity sigh comes, can't open any file?

That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

All hyperlinks are not working when published

All of the links work on iweb 09; however, when published some of the links are not working. To get an idea of what I mean you can go to the site, thinkwhatif.org and see it. Would someone be able to provide an answer how to solve it? I have unlinked and relinked too and that didn't work (at least the one time I did it).
Thanks in advance for helping me figure it out.
I am learning..

Bonjour,
It's a layout issue. Two of your buttons (who or what) are in the navigation part of your page (nav_layer), which is back layer of your page. In your page, the content (body_layer) overlays the bottom of this layer (nav_layer) where the buttons are.
!http://i22.servimg.com/u/f22/09/02/44/99/layout10.jpg!
Show layout (iWeb > View > Show layout) and replace the buttons in the content. As you can see , you 've got also a empty textbox in the content

Flex 4 scaleGrid properties are not working for me.

Hello All,
    I'm new to Flex 4. I have used Flex 3. But in flex 4 i'm facing one problem which i'm unable to solve. I have added a backgroundImage for a BorderContainer. Image is getting added but it is not at all scaling. I felt as the properties scaleGridTop, scaleGridBottom, scaleGridRight and scaleGridLeft are not working which was working in flex 3.
Here is my code
<s:BorderContainer
                       width="100%" height="100%"
                       backgroundImage="@Embed('/Styles/Images/toolIcons/Top_Bottom_Bar_Sub.png',
                       scaleGridLeft='150', scaleGridRight='650',
                       scaleGridTop='25', scaleGridBottom='26')"/>
The image to be added is here.
This image is getting added but it is totally stretched. Not scaling according to the positions i've set.
Please can anybody help me in resolving this issue...?

Looks like BorderContainer doesn't respect scaleGrid values. I have filed a bug for this here: http://bugs.adobe.com/jira/browse/SDK-30676

My flash links are not working when it is www request

Dear Friends,
We have done one application for the mobiles..in that we have used flash xml menu. In my xml menu i have mentioned the urls with www. request.
When its http://www.xyz.com menu links are not working.
If its http://xyz.com my menu links are working fine. Can you please suggest me once how can i achive this.

How did you fix it?

SSO not working when launching the InfoView application

We are so close to implementing SSO for BO Edge 3.0 using AD and Kerberos. We can logon to InfoView and CMC using AD authenication and it works fine. When turning on SSO:
    <context-param>
        <param-name>sso.enabled</param-name>
        <param-value>true</param-value>
    </context-param>
in the InfoViewApp web.xml it fails with an error message in the Tomcat stdout.log
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
+          [Krb5LoginModule] user entered username: "at"MYCOMPANY.COM+
User name is missing.
When done through the application logon screen and able to logon it is
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
+          [Krb5LoginModule] user entered username: dennis"at"MYCOMPANY.COM+
The username appears in the log file followed by the debug message for Kerberos key being created.
I am so close, does anyone have an idea?

Hi Tim,
The Vintela SSO document for BOE XI 3.1 is very comprehensive, but it has not resolved my issue.
Under NTLM option I SSO works great with .NET InfoView as long as I have the web site authentication set to Windows Authentication and ASP .NET Authentication enabled. Once the ASP .NET is disabled, SSO does not work.
When using the Kerberos option, .NET InfoView SSO does not work due to the error 'propagating the security context between the security server and the client'.
The Java InfoView SSO does not work either, but I can enter my user credentials and logon fine.
std.out error:
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
          [Krb5LoginModule] user entered username: @OR.PROVIDENCE.ORG
Acquire TGT using AS Exchange
          [Krb5LoginModule] authentication failed
Generic error (description in e-text) (60)
No user name is being passed. I've been through a multitude of documents and forums ensuring settings are correct and I believe they are including no duplicate SPN's.
The only issue on the server is that I cannot open the tomcat confi app. due to it not able to start service BOE120Tomcat. I was able to update the registry with the info for the bsclogin.config and krb5.ini. I was not able to find anything on getting that service started.
Any ideas? Need more info? I have a bunch.
Thanks and have fun,
Phil

Hyperlinks in Excel not working when doing the PDF Convert

I have worked on this and worked on this. Now I am at a point where I need assistance as I am stumped. I have about 20 different facilities that have financial statements that need to be published in Adobe as a PDF format and when I go through the steps to convert everything looks good, except the links are not working. We have about 62-74 pages that will be exported and due to the departments and such we need the links to work.
This is through Excel-
I select the worksheets I want to convert then after it is done I open the PDF and the links are not working. To set them up manually in Adobe is too labor intensive -- any ideas on how to get this to work?
Thanks in advance for any assistance you can provide me.

I am on the X version.
I am using the PDFMaker
Using either 2003 or 2010 Excel version
Click on making bookmarks and links
I can send an attachment, please beware that is it financial information that cannot be published-also the hyperlinks are setup in Excel as well.
Not sure how to upload the worksheet and would prefer to send via email if at all possible.
ANY HELP is GREATLY Appreciated :-)
Thank you and have a great day!

Formlevel Validation properties are not working when stitching the XDPs

Similar Messages

Maybe you are looking for