Formpages as a * in a smartform
Hi experts.
i have a problem on a smartform. The variable formpages is represented as a * on all the pages lower than 10. I don not understeadnd this, from 10 to higher it is correcly print. Enyone knows what does it mean?
Thank-you!!
Hi,
Try by increasing the width of the window in layout.
Check the following link, if your question not answered.
http://www.****************/Tutorials/Smartforms/SFMain.htm
Regards,
Chandu
Similar Messages
-
SFSY-FORMPAGES and SFSY-JOBPAGES
Hi
I have given SFSY-FORMPAGES and SFSY-JOBPAGES in smartforms but in the output form * is getting printed instead of page numbers and total pages.
thanks
SatishHi Satish,
Please refer the below thread(s),
Page Number in Smartform
Best Regards. -
Smartform output error &SFSY-FORMPAGES& &SFSY-JOBPAGES&
Hi, everyone.
I have a issue about smartform printing.
My smartform contains system variables
&SFSY-PAGE&, &SFSY-FORMPAGES&, &SFSY-JOBPAGES&
example as below.
I have a 64 pages form printing.
but I got preview like this
PAGE: 6/ 46/46
6: &SFSY-PAGE&
46:&SFSY-FORMPAGES&
46:&SFSY-JOBPAGES&
AS I print it out, as preview.
Does anybody have the issue like this?
Please help solve. Thank in advance.Hi,
If you use &SFSY-PAGE& of &SFSY-FORMPAGES&
the output will be like 1 of 64
2 of 64........
&SFSY-PAGE&:- Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node
&SFSY-FORMPAGES&:- Displays the total number of pages for the currently processed form. This allows you to include texts such as u2018Page x of yu2019 into your output.
&SFSY-JOBPAGES&:-Contains the total page number of all forms in the currently processed print request.
Since in your case job contains only one form so you are getting 46 for both form pages and job pages(job can have any number of forms).
Thank U,
Jay.... -
Smartforms: SFSY-FORMPAGES = star very strange
Hi,
I have a very strange problem:
In a smartform i use as usually &SFSY-PAGE&/&SFSY-FORMPAGES& for numer of pages/total pages.
If the spool has less than ten pages all is right, if it has greater than ten pages (in the example 14) i get that:
1/*
2/*
3/*
4/*
5/*
6/*
7/*
8/*
9/*
10/14
11/14
12/14
13/14
14/14
I don't understand why.
I tried to increase the space for window but nothing changes.
Please, help me.
Matteo Vernile.Use &SFSY-PAGE& of &SFSY-FORMPAGES(4ZC)& instead of the &SFSY-PAGE&/&SFSY-FORMPAGES&.
This will not print astrik upto 9999 pages.
REgards,
Naimesh Patel -
Print number pages and formpages in a spool of multiple smartforms
Dear all,
I have created a program that create a spool using 4 smartforms. For each smartform the program can be create one o more pages. at the moment in my spool I have this situation:
document #1: smartforms#1 pag 1/1,
smartforms#2 pag 1/2, pag 2/2
smartforms#3 pag 1/1,
smartforms#4 pag 1/5, 2/5, 3/5, 4/5, 5/5.
document #2: smartforms#1 pag 1/1,
smartforms#2 pag 1/3, pag 2/3, pag 3/3
smartforms#3 pag 1/2, 2/2
smartforms#4 pag 1/4, 2/4, 3/4, 4/4.
How I can modify my program in order to have this result:
document #1: smartforms#1 pag 1/9,
smartforms#2 pag 2/9, pag 3/9
smartforms#3 pag 4/9,
smartforms#4 pag 5/9, 6/9, 7/9, 8/9, 9/9
document #2: smartforms#1 pag 1/10,
smartforms#2 pag 2/10, 3/10, 4/10,
smartforms#3 pag 5/10, 6/10,
smartforms#4 pag 7/10, 8/10, 9/10, 10/10.
Thanks in advance for any solutions.
Maurohi
may be this hepls u, i have senn this in another thread..
smartfom1.
ssfcompop-TDNEWID = 'X'.
ssfcompop-TDFINAL = ' '.
ssfcompop-TDIMMED = ' '.
smartfom2,3,4
ssfcompop-TDNEWID = ' '.
ssfcompop-TDFINAL = ' '.
ssfcompop-TDIMMED = ' '.
smartfom5,
ssfcompop-TDNEWID = ' '.
ssfcompop-TDFINAL = 'X'.
ssfcompop-TDIMMED = 'X'. -
Formpages in smartform showing as ' 1 of *'
Hi All,
While displaying the print preview the page no showing as 1 of *.
After 10 pages it is showing properly.
please help,
thnkx in advance.
Salmanhi vikas,
<removed_by_moderator>
The * is printed because of a sap problem and sap has released an oss note for it.
кu03B1ятu03B9к
Edited by: Julius Bussche on Jan 20, 2009 11:24 AM -
* is coming while priniting smartform of multiple pages for a customer
Hi Experts,
I m priniting the smartform for the Customer statement and i m using SFSY-PAGE and SFSY-FORMPAGES for the page number and for total number for pages. There am facing the problem of * in SFSY-FORMPAGES..
If the total no of pages is single digit like 8 or 7 it is printing page 1 of 8 etc, but if it is double digit in the sense like 11, it is printing Page 1 of * Page 2 of * and Page 10 of 11.... I have used the Z and C in the variables in Smartform...
Please help me to solve thisHi,
Refer Question Why SFSY-FORMPAGES is output as a star "" instead of the total number of pages?* from the below link
http://wiki.sdn.sap.com/wiki/display/ABAP/SmartFormsFAQ#SmartFormsFAQ-WhySFSYFORMPAGESisoutputasastar%22%22insteadofthetotalnumberofpages%3F
Thanks,
Pawan -
How to modify total pages in smartforms?
Hi All,
In smartform Im printing ' page of total pages' as &SFSY-PAGE& of &SFSY-FORMPAGES(3CZ)&. All are working fine. Now at last I have to print one extra page without page no. So, If the total o/p pages are 16 ( including last page) I have to show i.e
1 of 15, 2 of 15 .... 15 of 15 , and in the last pages nothing. For this Im moving SFSY-FORMPAGES to one variable and substracting one from it, but its not working, its showing as 1 of 0, 2 of 1 ... 15 of 14..
so how to decrease the total page number. I think it generates in runtime and in my smartform all windows are in one PAGE.
So how to do this ? any Idea?Hi,
I think we can try this. Issue new page after all pages. If page less than or equal to total pages, display that, else issue new page.
/: IF &SFSY-PAGE& LE &SFSY-FORMPAGES(3CZ)& .
' page of total pages' as &SFSY-PAGE& of &SFSY-FORMPAGES(3CZ)&
/: ELSE.
/: NEW-PAGE.
/: ENDIF. -
Reg .. functions used in smartforms
Hye Friends,
Im not getting y we use the functions SSF_OPEN AND SSF_CLOSE in smartforms.
what is the basic defn of both and for what purpose they are used in.
Many thanks
SunnyHi
go through this:
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Reward points if useful
Regards
Anji -
How to Print Signature in smartform
Hi all,
how to find Last Page of a Sold-To-Party to Print Signature in Smart Form?Hi ,
Can u tell me where u r counting the No.Of Pages in your smartform...
If u r counting no.of Pages other than final window it will not work(I mean in final window only u will get the value of the sfsy-formpages count) . Put the break-point in the final check what ever the condition for printing the signature window .
Let me know if u have any concerns....
Regards,
Lokesh. -
How to print grandtotal in table footer only in the last page in SMARTFORMS
Hello Experts,
How do I print the GRANDTOTAL in the table footer only on the LAST PAGE in SMARTFORMS.
What I have done is in the text element of CELL1 of the table footer i wrote the folowing logic but not working.
/: IF &SFSY-PAGE& EQ &SFSY-FORMPAGES&.
* V_SUM.
/: ENDIF.
I even tried this.
/: IF &NEXT-PAGE& EQ 0.
* V_SUM.
/: ENDIF.
but still it displays the grand total on all pages at table footer.
How do i go for this experts.
Regards,
Ranjith NHI Nambiar,
To print the grand total only on the last page then create the secondary window --> create the text node for the grand total -->In the condition tab check only after the end of the main window.
This grand total will be displayed after all the items and end of the main window.
Footer in the table displays as the subtotals i.e on every page total is displayed..
Regards,
Sravanthi -
How to use CALL FUNCTION '/1BCDWB/SF00000014' in smartform urgent
hiiiiiiiii
Iam doing classical report n i want my output to be printed in smartform.
So my output is in IT_FINAL table.In smartform in Form Interface Table column i had declare :::
Parameter Name: IT_FINAL
Type Assignment:LIKE
Associated Type:ZSD_FINAL ( Its a structure of IT_FINAL)
And in SE38..iam using...............
data: FM_NAME1 type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_SDPRSR03_PR'
importing
FM_NAME = FM_NAME1.
CALL FUNCTION FM_NAME1
EXPORTING
IT_FINAL = IT_FINAL.
So while running its giving dump..
I DONT KNOW HOW TO USE THE ABOVE FUNCTION MODULE.
CALL FUNCTION '/1BCDWB/SF00000014'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please suggest me with example if possible......URGENT.
(Rewards if solved)
Regards.Hi
see the below doc and do accordingly
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
<b>call function 'SSF_FUNCTION_MODULE_NAME'</b>
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>call function FM_NAME</b>
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Regards
Anji -
How to carry forward subtotal to other page in smartforms
Hi all,
My requirement is to calculate the subtotal of a particular page and to print that subtotal
at the end of each page.And this subtotal has to be carry forwarded as the first item of the next page(say page2).
And again at the end of this page(page2) I have to print the subtotal and needs to carry forward this subtotal again on to
the first item of the page3..
My problem is I am doing it in a table.I am calculating the subtotal and displaying the subtotal at the footer of the table..
In the footer again I am redefining table work area values with the text 'Subtotal' and subtotal Amount so that thinking
that it would print as first line item on the next new page....
But the problem is I am getting subtotal as 2'nd line item on each new page instead of first line item of each page.........
Can anyone resolve this issue.........
I dont want this subtotal to be printed on the last page since I am getting Total of all these subtotals.....
Below is my required structure
Page 1.
Desc Amount
x 100
y 200
Subtotal 300
Page2.(Required page2)
Desc Amount
a 100
b 200
Subtotal 600
Page2.(But getting as below,which I dont require )
Desc Amount
a 100
Subtotal 300
b 200
Subtotal 600
Page3.(Required page3)( I dont require Subtotal here on the last page)
Desc Amount
a 100
b 200
Total 900
Any suggestions pls
This is in Smartform
Thanks,
ChinnuHi ,
First define the global variable for subtotal & grand total
In the first page display the table data normally and if you dont want to print the headers of the table check the condition in the header AT START OF TABLE
calculate the grand totals (Ex. g_tot = g_tot + wa_vbap-kwmeng)
Ex. page1 layout (Note : next page as page2)
Header window
main window
final window
In the final window create an alternative node (in flow logic )
for alternative node put the condition as
sfsy-page = sfsy-formpages
if true
print the data as TOTAL &g_tot&
else (False node)
print the data as SUBTOTAL &g_tot&
Out put will be
page1 o/p
sales order material orderqty
1 M10 10
2 M11 20
3 M12 30
sub total 60 (g_tot value )
page2 onwards o/p
4 M13 30
5 M14 20
6 M15 15
Total 125 (g_tot value )
Let me know if any concerns ......... -
Hi Guys,
I have a po smartform to do. need ur help in this regards.
if u go to t.code me22n , in the iten details , material data tab we have a push button for configuration where the charecteristics of the material comes up. Now my client wants that all these charecteristcs should come up in the form. And for the values he selects a yes should be prefixed with those values. Please help me out. its very urgent.Hi
In the smartform CREATE the PROGRAM LINES and fetch the Characteristics of the Materisl using the fun module CLAF_CLASSIFICATION_OF_OBJECTS or Bapi
BAPI_OBJCL_GETDETAIL
with the help of them you will get the characteristics
PUCHASE ORDER
Output type : NEU
ScriptForm Name : MEDRUCK
Driver Program Name : SAPMF06P
smartform name : /SMB40/MMPO_L
smartform driver program: /SMB40/FM06P
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points for useful Answers</b>
Regards
Anji -
Purchase order layout using Smartform
Hi All,
Can anyone let me know how to create Purchase order layout using smartforms and assigning it to output type.
Is there standard smartform for purchase order?http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://www.sap-basis-abap.com/sapsf001.htm
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.esnips.com/doc/13b7ae7a-b32c-4b96-b588-881859d4ac99/Template,Table,Loop,Command-in-Smartforms.doc
http://www.esnips.com/doc/97acb00a-e513-4611-91f0-c626f460bfc5/Smart_Form_Overview.pdf
http://www.esnips.com/doc/77a981b9-8fe3-4fbb-8101-67745c1fe60c/SMART-FORMS_shail.ppt
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Try this. A simple sample Smart Form.
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SMARTFORMS GENERATION: (calling internal table fields)
 Open a smartform using the tcode smartforms.
 Usually form attributes shows admn data.
 In the form interface declare import/export parameters if any. Else declare the tables in tables tab button.
 In the windows and pages expand and create a table. It automatically generates header, main area and footer for the table.
 In data tab button in the table we usually declare a work area to bring the data from se38. Like: ktab into wa. ( The purpose of declaring the wa is , to get the data of the ktab in to header from the body area of the internal table).
 And in the tablepainter pushbutton in table we can have any no of line types. Depending on the requirement. ( for ex: If we want to devide a row in to 4 columns, we can devide it as 4,4,4,4cm as line type 1, And usually for the footer we dont need no of columns, So, we declare it as one column with 16cm measure with the name line type 2.). We can use these line types in the tables.
 In the header right click>>create>>tableline. It asks for line type. Select one line type which is appropriate.
 Like same create a row2 in main area using right click. If we select the line type 1, it automatically generates 4 cells. We can create text in each cell as per requirement.
 We can generate general attributes using general attributes tab button in the text. Or in the other way. We can switch on the field list on/off button from the application tool bar. It displays all the attributes in the left down corner of the screen. We can drag and drop the required fields in the general attributes tab button of the text.
 We continue the same procedure for all the texts. The texts should be displayed in the gray color. Then only it can collects the data from the abap editor fields.
 If it wont turns gray, we can check the fields in the editor by changing it to the line editor. The best thing is to drag the fields from the list, rather than declaring like &wa-matnr&
 In the footer also we create a line type and in that table line we create text.
SE38 PROGRAM(method I):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
data: FM_NAME TYPE RS38L_FNAM.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in
S_MATNR.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_MYFIRST_FORM2'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IN THE OTHER WAY(method II):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in S_MATNR.
CALL FUNCTION '/1BCDWB/SF00000199'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the method I we are calling the amartform dynamically using the function module 'SSF_FUNCTION_MODULE_NAME'.
Here we are exporting form name and importing fm_name.
So we need to declare the variable fm_name as
data: FM_NAME TYPE RS38L_FNAM.
We can have the type of the fm_name in the function module 'SSF_FUNCTION_MODULE_NAME' (in the export tab button).
Since we are passin the name of the Function module generated by the smart form in to the fm_name variable. We run the function module with the name fm_name, but not the FM generated by the smartform(like /1BCDWB/SF00000199)¬¬¬¬¬¬.
In the method II we directly call the smartform generated function module (i.e, /1BCDWB/SF00000199).
But the method I is recommended. In the method I, The fm_name is a variable we dont put it in the quotes while calling.
In the both methods we declare the internal table using the like option, but not begin of . end of. And in select statement we select *, But not individual fields.
EX2:
SMART FORM NAME: ZGITI_FORM1.
SE38:
REPORT Z_CALL_GIRI_FORM1 .
TABLES: VBRK.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T1.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
*INITIALIZATION.
*T1 = 'SELECTION-CRIETERIA'.
DATA: BEGIN OF I_INVOICE OCCURS 1.
INCLUDE STRUCTURE ZSTR_INVOICE.
DATA: END OF I_INVOICE.
DATA: VAR1 LIKE VBRP-NETWR.
DATA: BEGIN OF I_ADDRESS OCCURS 1.
INCLUDE STRUCTURE ZSTR_ADDRESS.
DATA: END OF I_ADDRESS.
DATA: BEGIN OF I_ORDER OCCURS 1.
INCLUDE STRUCTURE ZSTR_ORDER.
DATA: END OF I_ORDER.
DATA: BEGIN OF I_ITEM OCCURS 1.
INCLUDE STRUCTURE ZSTR_ITEM.
DATA: END OF I_ITEM.
DATA: BEGIN OF I_VBFA OCCURS 1,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
END OF I_VBFA.
SELECT KUNAG VBELN VKORG VTWEG SPART FROM VBRK INTO TABLE I_INVOICE
WHERE VBELN IN S_VBELN.
IF I_INVOICE[] IS NOT INITIAL.
SELECT KUNNR LAND1 NAME1 NAME2 ORT01 PSTLZ REGIO FROM
KNA1 INTO CORRESPONDING FIELDS OF TABLE I_ADDRESS FOR ALL ENTRIES IN
I_INVOICE WHERE KUNNR = I_INVOICE-KUNAG.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT VBELV VBELN FROM VBFA INTO TABLE I_VBFA FOR ALL ENTRIES IN
I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
IF I_VBFA[] IS NOT INITIAL.
SELECT VBELN BSTNK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE I_ORDER
FOR ALL ENTRIES IN I_VBFA WHERE VBELN = I_VBFA-VBELV.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT POSNR MATNR ARKTX FKIMG NETWR FROM VBRP INTO TABLE I_ITEM FOR ALL
ENTRIES IN I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
LOOP AT I_ITEM.
AT LAST.
SUM.
VAR1 = I_ITEM-NETWR.
ENDAT.
ENDLOOP.
CALL FUNCTION '/1BCDWB/SF00000223'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
var = VAR1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
tables
i_vbrk = I_INVOICE
i_vbak = I_ORDER
i_vbrp = I_ITEM
i_kna1 = I_ADDRESS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Maybe you are looking for
-
Automatic Payment terms without referrring Customer Master nor manual entry
Hi, I have a credit memo with reference to one billing document. It is automatically coming with payment terms which is not maintained in customer master nor manual entry in the document. I had checked all the configuration related settings for the d
-
Error while saving Report output-Authentication failed
Hi All, For the client system there is a customization report with output of html format. it can't display all with the error message unable to open the internet site. http://<site:port>/OA_CGI/FNDWRR.exe?temp_id=<temp_id>* operation aborted* if user
-
Do I have to install OS-X on my EHD partition to Boot?
I have a 500GB EHD and just partitioned it to back-up/clone my MBP, and use the other partition to hold my video footage. I understand I will use SuperDuper to clone the MBP HD, however, in the rare case I need to boot from the EHD, do I need to inst
-
Return material from cost center
Dear All, Return material from cost center:- xx, Material:- yyy qty z Pc in inventory. create sales order for delivery. They are materiel in prototype in R&D for customer loan What is the Process that has to be follows in SAP for this can some explai
-
How do I set a breakpoint in a Java Server page (.jsp)?
I have set up an application for remote debugging and am able to connect to it from JDeveloper. When the code execution comes to breakpoints that I have set in java (.java) files they work and the application stops so I can debug etc. This also appli