Forms 10g certification on Redhat Enterprise Linux 5 ??

Is Forms 10g certified on Redhat Enterprise Linux 5 ??

I don't think. of sure RHEL 5 is not certified for DB 10gR2 and even for OAS 10g.
Even if I have made an installation of DB 10gr2 for RHEL 5 with xen and it's work, meanwhile OAS 10 didn't work!
Anyway,Try to search for certification matrix on Oracle site

Similar Messages

Making new oracle 10g cluster in redhat enterprise linux

Hy All
i have installed redhat enterprise server in 2 systems and both are attached with SANE network storage. i want to configure oracle 10 g clustering with this setup.
should i have to configure clustering in linux only or there is a feature of clustering in oracle?
if yes than how to do that? i dont have any idea about oracle
please somebody help me
with regards,
ali

Hi Ali!
Hardware clustering is differnet from Oracle clustering.
If you have the database you should investigate RAC http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb14197%2Ftoc.htm&remark=portal+%28Administration%29
For the Application Server have a look at http://download-uk.oracle.com/docs/cd/B14099_18/core.1012/b14003/toc.htm
Hardware clustering with RedHat could be achieved with Piranha.
cu
Andreas

Exception signal: 11 (SIGSEGV) on RedHat Enterprise Linux

Oracle 10g XE running on RedHat Enterprise Linux.
Certain operations (in this case a delete) cause Oracle instance to die with Exception signal: 11 (SIGSEGV).
Anyone have any ideas? How do I troubleshoot this, or is it obvious from the trace file entry below that there's a configuration problem?
THANKS FOR ANY HELP!
Relevant section from trace file:
PARSING IN CURSOR #5 len=66 dep=0 uid=36 oct=7 lid=36 tim=1217282870362781 hv=13
17951628 ad='4727614c'
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
END OF STMT
PARSE #5:c=1000,e=49,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1217282870362779
EXEC #5:c=0,e=240,p=0,cr=1,cu=8,mis=0,r=2,dep=0,og=1,tim=1217282870363056
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
1080, PC: [0xa2c6b92, kpoal8()+4230]
Registers:
%eax: 0xffe5b890 %ebx: 0x00000000 %ecx: 0xf7b604a4
%edx: 0x00000000 %edi: 0x00000000 %esi: 0x00000000
%esp: 0xffe59724 %ebp: 0xffe599b4 %eip: 0x0a2c6b92
%efl: 0x00210246
kpoal8()+4217 (0xa2c6b85) je 0xa2c6b8c
kpoal8()+4219 (0xa2c6b87) mov 0xc(%edx),%edx
kpoal8()+4222 (0xa2c6b8a) jmp 0xa2c6b98
kpoal8()+4224 (0xa2c6b8c) mov 0x15c(%ecx),%edx
kpoal8()+4230 (0xa2c6b92) mov 0x1080(%edx),%edxkpoal8()+4236 (0xa2c6b98) mov 0x18(%eax),%ecx
kpoal8()+4239 (0xa2c6b9b) mov %edx,0x14(%ecx)
kpoal8()+4242 (0xa2c6b9e) jmp 0xa2c6690
kpoal8()+4247 (0xa2c6ba3) movzb 0xc2b9a63,%edx
*** 2009-07-01 18:20:59.254
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [kpoal8()+4230] [SIGSEGV] [Address n
ot mapped to object] [0x1080] [] []
Current SQL statement for this session:
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+27 call ksedst1() 1 ? 1 ?
ksedmp()+557 call ksedst() 1 ? 3038 ? F7000000 ?
F7CECF88 ? FFFFFFFF ?
F7CECF80 ?
ssexhd()+863 call ksedmp() 3 ? A2C6B92 ? 616F706B ?
2928386C ? 3332342B ? 30 ?
kpoal8()+4230 signal 00000000 B ? F7CEEC8C ? F7CEED0C ?
opiodr()+835 call 00000000 5E ? 17 ? FFE5B890 ?
ttcpip()+1839 call 00000000 5E ? 17 ? FFE5B890 ? 5 ?
opitsk()+1027 call ttcpip() C6E6D80 ? 5E ? FFE5B890 ? 0 ?
FFE5AD6C ? FFE5B9A0 ?
opiino()+821 call opitsk() 0 ? 0 ?
opiodr()+835 call 00000000 3C ? 4 ? FFE5C460 ?
opidrv()+466 call opiodr() 3C ? 4 ? FFE5C460 ? 0 ?
sou2o()+91 call opidrv() 3C ? 4 ? FFE5C460 ?
08288137 call sou2o() FFE5C444 ? 3C ? 4 ?
FFE5C460 ?
main()+111 call 082880C2 2 ? FFE5C490 ?
__libc_start_main() call 00000000 2 ? FFE5C554 ? FFE5C560 ?
+220 638810 ? 0 ? 1 ?

Sanjay --
I don't know what "set all ORACLE variables" means. Is there a manual page somewhere that explains this? I mean, there are a LOT of variables.
This XE installation works 99.99% of the time, involving hundreds of tables and a large variety of queries, functions, packages, triggers etc. Only this one transaction causes the error, so I'm not sure what additional ORACLE variables would need to be set or modified.
Also, what's the procedure for submitting an SR to Oracle? Do you have a link? I looked at the Oracle site and it seems to require the user to have a commercial support level before anything can be submitted.
Thanks.

Crystal Reports Server 2008 V1, RedHat Enterprise Linux, MySQL, ODBC

Iu2019m confused about connecting to an ODBC source from a report within CMC. Iu2019m a Unix guy; I donu2019t know much about Crystal reports, but Iu2019m working with a Crystal guy to get this thing working.
 
First, background: I have installed Crystal Reports Server 2008 V1 in RedHat Enterprise Linux (5.4), and itu2019s running just fine! Iu2019m using the included Tomcat application server, but Iu2019m storing CMS and Audit data our local running copy of MySQL (5.1.42). The RHEL install is native 32-bit (the only way I could get it to work), Crystal is storing and retrieving data from MySQL, The Central Management Console is responding to port 8080 over Tomcat, Iu2019m able to log in and see stuff, and so far, life is good.
 
Now, where Iu2019m stuck: the data weu2019re trying to build reports from also resides in this local Linux / MySQL install, and connecting to it from a report within CMC is where Iu2019m lost.
 
First, I successfully installed the unixODBC and MyODBC drivers in Linux. Iu2019m able to connect to MySQL successfully using the isql utility. Here are my conf files:
 
<pre class="jive-pre"><code class="jive-code jive-java">/etc/odbc.ini
[DSN_NAME]
Driver = MySQL ODBC 5.1 Driver
DATABASE = project_web_prod
DESCRIPTION = Project Description
UID = username
PWD = password
SOCKET = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib/libmyodbc5.so
UsageCount = 1
</code></pre>
 
Again, this all works with isql (Iu2019ve even used both a socket connection, and port 3306, in odbc.ini).
 
Now, our Crystal guy uploads a report into the CMC. I go to Folders -> <Project Folder>, right-click the report I want to test, click Database Configuration, and check the option Use custom database login information specified here. I select database driver ODBC from the dropdown, and type in the server, database, username, and password info. However, when I try to run the report, it fails to connect.
 
So, stupid question, can Crystalu2019s CMC use the system ODBC configuration options? (The ones stored in /etc). Because I saw an odbc.ini file in ~crystalinstalldir/bobje/. I edited it to match the contents of my /etc/odbc[inst].ini files, but to no avail. I saw that Crystal has itu2019s own ODBC engine, but it doesnu2019t support MyODBC driver, does it? I even tried hacking env.sh to use the system unixODBC library instead of the included one, but no luck.
 
So, in short, my question: how do I simply get reports in CMC to connect to a MySQL data source (using ODBC)?
 
Thanks so much! An answer to this question will save my day!
 

Thank you, Efstratios, for the helpful reply!
So, I followed the directions in the PDF file you attached, and everything went smoothly. However, Iu2019m still not able to connect to ODBC within CMC.
Hereu2019s what I did:
<ul style="list-style-type:disc">
<li>Copied the unixODBC libraries over to <installdir>/bobje/enterprise120/linux_x86/odbc/lib</li>
<li>Removed MySQL ODBC connector 5.1, installed MySQL ODBC connector 3.51.</li>
<li>Edited <installdir>/bobje/defaultodbc.ini, added my DSN and MySQL library info as per the instructions (I have both an odbc.ini, and defaultodbc.ini, identical files, just to be safe)</li>
<li>Tested the connection using these libraries, this odbc.ini, and isql. Worked just fine</li>
</ul>
So, my problem seems to be in getting the CMC to actually use my ODBC setup!
Any other hints / things I could try?
When I right-click a report, and go to “Database Configuration,” which connection options should I use for the report? Iu2019ve tried both “Use original database logon information from the report,” and “Use custom database logon information specified here” (using the ODBC option from the drop-down menu). Either way, if I enter in the database, username, password, and then try to run the report (“Run Now”), I get this message in the History: “Failed - Information is needed before this report can be processed.”
Is there another place I could get a more helpful error message? Or is there, perhaps, another way I could test database connectivity from within CMC? I wish there were at least a “Test Database Connection” optionu2026 :P
Thanks so much for your help!

Unable to install j2sdk-1.4.2 in Redhat Enterprise Linux advanced server v3

When trying to extract j2sdk-1_4_2 on RedHat Enterprise Linux advanced server, I got the message
Do you agree to the above license terms? [yes or no]
tail: bash: No such file or directory
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
The RHEL is with kernel 2.4.21-37. I got the same error message on extracting both binary code and the rpmfile.
Is it because of the command "tail +511 $0 > $outname" ? And any experienses on how to fix it?
Thanks in advance.

checksum have to be exactyly right. Downloading by IE causes often errors - use firefox in downloading and calculate checksum.

Problem while intalling oracle 11i(11.5.9) on Redhat Enterprise Linux 3

Dear all,
we are installing oracle 11i ( 11.5.9) one Redhat Enterprise Linux 3
it gives the following error massage .
Error code received when running external process.check the log file for details._
Running Database Install Driver for PROP instance._
Please any suggestion.
Thanks

Hi,
This is a generic error, so please check the installation log files for more details about the error.
Regards,
Hussein

Running ocs10g services on Redhat Enterprise linux v4.0

Hello,
How can i run Collaboration Suite Services from linux Redhat Enterprise Linux v4.0?
Thanks
Khaled Fahmy

Can you be more specific?
Do you have a working installation? Is the manual not explaining situations that you are in?
OCS does run on RH 4.
cu
Andreas

Flash media interactive server with redhat enterprise linux ?

Was wondering if anyone was having issues trying to install
the flash media interactive server on a RedHat Enterprise Linux
machine. It seems that the installer that is packaged with the
program in incompatiable. If so what are you doing to get the
server installed? Thanks for any help

i check the dependencies and noticed that there was one that
was not satisfyied " libasneu.so.1 as it was link to nothing. After
moving the file to the /usr/lib and running the ldd command on the
fmsmaster file i was then able to see the link between the two.
When I try to install the program again I recieve the same error
message
"no package installFMS available"- this happens when i try
using yum to install the program or
ERROR: your distribution, unknown, is not supported by this
Adobe Flash Media Server installer. - happens when ./installFMS is
ran.
anyone else know of any other tricks to get this installed ?
Thanks again for everyone help on this issue.

Steps to install Oracle 10g on Red Hat Enterprise Linux 4 AS

Hi Friends,
I want to install oracle 10g on Red Hat Enterprise Lnux 4 AS. Can anyone give me steps how to install oracle 10g on it? My machine configuration Processor 2.66ghz Intel, Memory 1024 MB , HDD 160 GB, 845 mother board.

In addition to the excellent suggestion by Paul, you may want to look at the internet resources such as
http://www.puschitz.com
http://ivan.kartik.sk
http://www.dizwell.com
each of which as Oracle install on Linux cookbooks.

Dell Precision M6600 laptop Certification for Oracle Enterprise Linux 5.5

Dear Experts,
Please share the certification for Dell Precision M6600 laptop with Oracle Enterprise Linux 5.5 (x86 64 bit) Operating System.
Please give it a high priority as this is a business critical requirement.
Thanks & Regards
Chetan Vithlani

867508 wrote:
Please give it a high priority as this is a business critical requirement.
867508
     Newbie
Handle:      867508
Status Level:      Newbie
Registered:      Jun 21, 2011
Total Posts:      1
Total Questions:      1 (1 unresolved)
Moderator Comment
To reinforce what was mentioned in the first response...
There is no "urgent" in these forums and your statement that everyone must jump to your request just because you say so is rude.
You have been a viewer of these user-to-user OTN forums for more than a year. That is far long enough to know better.
For the future, whenever you have a critical business need for information, you will need to use your support credentials and log a SR ro Oracle Technical Support. Be prepared each time to prove to them that such a need exists.

Installing 11.5.8 on REDHAT ENTERPRISE LINUX ADVANCED SERVER 3

Hi all,
I am trying to install 11.5.8 on Red Hat Enterprise Linux Advanced Server 3..
Everything is going fine till the system check like space check and JDK availablity check...
After that when RAPID INSTALL is tryig to install...it is giving error...
When I checked in the log..I found the following lines..
===================================================================
Processing DriverFile = /tmp/RapidInstall/template/adridb.drv
Running Instantiation Drivers for /tmp/RapidInstall/template/adridb.drv
Invalid target file name in driver file: <s_com>/admin/out
instantiate file:
source : /tmp/RapidInstall/template/adrun8i.sh
dest : /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh
backup : /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh to /tmp/templbac/adrun8i.sh
Command: su oraprod -c "cp /tmp/adrun8i.sh /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh" FAILED
Creating File /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh FAILED
setting permissions: 755
setting permissions FAILED
setting ownership: oraprod:dba
setting ownership FAILED
instantiate file:
source : /tmp/RapidInstall/template/adrundb.sh
dest : /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh
backup : /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh to /tmp/templbac/adrundb.sh
Command: su oraprod -c "cp /tmp/adrundb.sh /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh" FAILED
Creating File /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh FAILED
setting permissions: 755
setting permissions FAILED
setting ownership: oraprod:dba
setting ownership FAILED
Step 0 of 2
Command: /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh
Step 1 of 2: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has suceeded
Processing Step 1 of 2
Step 1 of 2
Command: /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh
Step 2 of 2: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has suceeded
Processing Step 2 of 2
Processing DriverFile = /tmp/RapidInstall/template/adriapps.drv
Running Instantiation Drivers for /tmp/RapidInstall/template/adriapps.drv
instantiate file:
source : /tmp/RapidInstall/template/adrunias.sh
dest : /d01/oracle/prodcomn/temp/adrunias.sh
backup : /d01/oracle/prodcomn/temp/adrunias.sh to /tmp/templbac/adrunias0.sh
setting permissions: 755
setting ownership: applprod:dba
setting ownership FAILED
instantiate file:
source : /tmp/RapidInstall/template/adrunat.sh
dest : /d01/oracle/prodcomn/temp/adrunat.sh
backup : /d01/oracle/prodcomn/temp/adrunat.sh to /tmp/templbac/adrunat0.sh
setting permissions: 755
setting ownership: applprod:dba
setting ownership FAILED
Step 0 of 2
Command: /d01/oracle/prodcomn/temp/adrunias.sh
Step 1 of 2: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has suceeded
Processing Step 1 of 2
Executing: su applprod -c "/d01/oracle/prodcomn/temp/adrunias.sh APPS APPS"
Statusstring Installing iAS - InstantiateFile -d /tmp/RapidInstall/driver/ias/driver/gias.drv
Error occurred during initialization of VM
Unable to load native library: /tmp/RapidInstall/jre/Linux/1.3.1/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Cannot execute install of iAS ORACLE_HOME
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
Database Availability Check
========================================================
Can anyone pls help me.
Ajoy Kumar Thapa

Do you have experience installing Oracle db on UNIX? It seems to me that you did not even create a group and user with proper rights. Those shell scripts couldn't run.

Installing OBIEE on 64 bit Redhat Enterprise Linux 5

Hello,
We have a 64 bit Redhat Enterptise Linux 5 box, and I installed on it the 32 bit Oracle Database client as well as the OBIEE software.
The 64 bit installation requirements state: "For 64-bit Linux system installations, you must use the Oracle Database Client 32-bit libraries."
However, the installer never prompted me for the location of the 32 bit Oracle Database Client libraries.
How can I make sure that these libraries were indeed used during the installation?
Thank you very much.
-sb

The installer does not reference any libraries. You will need to place them in the correct or refer to the Database client libraries via your system path for your Server to work correctly.
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
Configuring Oracle Databases BI Server Under UNIX (page 135)

RedHat Enterprise Linux 6.x

Hello,
Was thinking of purchasing a TS130, 1105-1AU. Does anyone know if RHEL 6.x is compatible with this server?
TIA,
Eddie
Solved!
Go to Solution.

Linux OS'es are supported on the TS430 and not the TS130. The OS support is as follows:
Supported operating systems for ThinkServer TS130:
Microsoft Server 2008 R2 Foundation (64 Bit)
Microsoft Server 2008 R2 Standard (64 Bit)
Microsoft Server 2008 R2 Enterprise (64 Bit)
Microsoft Server 2008 R2 Foundation SP1(64 Bit)
Microsoft Server 2008 R2 Standard SP1 (64 Bit)
Microsoft Server 2008 R2 Enterprise SP1(64 Bit)
Microsoft Windows Small Business Server 2011 Standard (SBS7)
Supported operating systems for ThinkServer TS430:
Windows Server 2008 Foundation (64 Bit)
Windows Server 2008 Standard (32 & 64Bit)
Windows Server 2008 Enterprise (32 & 64Bit)
Windows Server 2008 R2 Foundation (64 Bit)
Windows Server 2008 R2 Standard (64 Bit)
Windows Server 2008 R2 Enterprise (64 Bit)
Windows Server 2008 R2 Foundation SP1 (64 Bit)
Windows Server 2008 R2 Standard SP1 (64 Bit)
Windows Server 2008 R2 Enterprise SP1(64 Bit)
Windows Small Business Server 2011 Standard (SBS7)
SUSE Enterprise Linux 10.3 (32 & 64 Bit)
SUSE Enterprise Linux 11.1 (32 & 64 Bit)
Red Hat Enterprise Linux 5.6 (32 & 64 Bit)
Red Hat Enterprise Linux 6.0 (32 & 64 Bit)

How to upgrade redhat enterprise linux 5 from 2.6.18 to UL3+

Hi Everybody,
I m installing SOA suite 11.1.1.5 on Enterprise linux server release 5.5 .
root>uname -a
Linux hostname 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
While installing SOA suite,*some operating system packages missing* in prerequisite checks (step 3 of step8 soa suite installation).
Checking recommended operating system packages failure.
Please make me it conform whether any command is used to upgrade to linux server releases 5 UL3+(recommended for soa suite) or whether there any packages available to download n how to install them.
Please it's urgent.......
With Regrards
Jyoti

You may refer -
http://ivan.kartik.sk/oracle/install_ora11gR1_elinux.html
Contact your OS provider to know more. You may also post query in Linux forum -
Oracle Linux
Regards,
Anuj

Oracle 10G 2 install on RedHat Enterprise Linux 4 - Get ORA-12154 exception

During the install, on the step "Oracle Database configuration assistant", I am getting the error:
ORA-12154 TNS": could not resolve the connect identifier specified.
Has anyone seen this before? I am struggling for past couple of days on this.

ORA-12154: TNS:could not resolve the connect identifier specified
Cause: A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.

Forms 10g certification on Redhat Enterprise Linux 5 ??

Similar Messages

Maybe you are looking for