Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

Similar Messages

Oracle 10g Installation issue on Windows 7

Hi,
I tried to install Oracle 10g downloaded from the below link on my laptop which runs in Windows 7.
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
The Oracle version is 10g release 2 for windows 7. I got this DB version no. for Windows 7 from this forum only. But still, I got the error message stated below and unable to install 10g.
------------------------------------------------------ Error --------------------------------------------------------------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2010-10-22_07-37-48AM.log
Please press Enter to exit...
------------------------------------------------------ Error End -------------------------------------------------------------------
Could you please let me know how I can fix this issue? Or is there any other oracle 10g release/patch to fix this issue? I need to install only Oracle 10g and not 11g.
Also, I need to install Oracle Forms 10g too.
It would be great if you could guide me on installing these two softwares in my laptop.
Your help will be very much appreciated.
Thanks,
Arun
Edited by: 804404 on Oct 22, 2010 7:52 AM

Welcome to the forums !
This issue has been discussed many times before. Pl use the search feature. The only versions supported in Win 7 (Professional or higher) are 10.2.0.5 and 11gR2. 10.2.0.5 is only available on My Oracle Support, while 11gR2 can be downloaded for free from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Re: Oracle for Windows 7
Re: which version of oracle works on windows 7
HTH
Srini

HT1925 I cannot uninstall Bonjour and Quicktime so I can do a complete reinstall of iTunes. I get an error message stating that both are older versions and to contact technical support. I am running Windows XP Professional Service Pack 3.

I am trying to update iTunes on my desktop (running Windows XP Professional Service Pack 3) and I continue to receive an error message stating that the update cannot continue because Bonjour and Quicktime are older versions and to contact technical support. I have tried repairing both and tried to uninstall iTunes and all of it's componants and still receive the same message. Any help getting this issue resolved as soon as possible will be much appreciated.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Next, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Windows XP Home or Professional Service Pack 3 for my new ipod??? Why?

Majority of all my ipod songs are on my iTunes on my old computer (which we bought in 2005), and at the time I've been using my second generation ipod. So now that I've bought a new 4th gig one...I see on the back of the case how it says that it needs to be Windows XP Home or Professional Service Pack 3 or later and iTunes 8 or later, but I'm not sure my computer is SP3 right now....does that mean that even if I update my iTunes, my ipod will not sync? I hope not....someone help

Don't worry, you can install iTunes on Windows 7. Just make sure the recipient knows to download the correct version of the installer.
iTunes for Windows (32 bit installer)
iTunes for Windows (64 bit installer)
tt2

Windows XP Service Pack 2 Installer

So I have a relatively simple application. I it just reads and writes CAN data using a Vector CANcase USB CAN device, and these drivers. I developed the source in LabVIEW 2012 SP1 in Windows 7 x64. I built the EXE and it works fine, I then made an installer. Under the Additional Installers I only included the NI LabVIEW Run-Time Engine 2012 SP1 f9. I unchecked all the components under it because I knew I didn't need them.
I tested the installer on my XP SP3 machine and it worked great. Then another user wanted the software and had XP SP2. I tried the installer and it said it requires XP Service Pack 3 or newer. So I opened the project I used to make the installer, and under the "System Requirements" it already had the oldest option selected which was Windows XP Service Pack 2 or later.
My solution is to update the PC and it is in the process of doing that right now. So for me this is fixed, but is this an issue? And anyone else that sees this issue you aren't crazy.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Yes, I've had the same problem. I believe it had something to do with .NET (on which some NI components rely?) only being supported by XP SP3.
If you read here - it mentions that the latest service pack may be required for some operating systems.
The one thing that is weird is that the 2012 LV Runtime apparently supports all service packs of XP but the 2013 Runtime only supports SP3. Actually, looking at the download page for the 2012 SP1 F9 runtime it says it only supports XP SP3 so during one of the updates they must have changed the minimum requirement.
Maybe you could try installing an older version of the LV2012 runtime which works with SP2?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Microsoft Windows XP Professional Service Pack 3 (Build 2600) To Be Filled By O.E.M. To Be Filled By O.E.M. iTunes 11.0.0.163 QuickTime 7.1 FairPlay 2.2.32 Apple Application Support 2.3.2 iPod 更新程序库 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mob

Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 11.0.0.163
QuickTime 7.1
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod 更新程序库 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote 提交“1.9.6.143”
Gracenote DSP 1.9.6.45
iTunes 序列号 0012B96815A8CF58
当前用户是管理员。
当前的本地日期与时间是：2002-01-17 20:57:39。
iTunes 并未在安全模式下运行。
WebKit 加速合成已启用。
不支持 HDCP。
支持 Core Media。
视频显示信息
NVIDIA GeForce 6150SE nForce 430
**** 外部插件信息 ****
尚未安装外置插件。
**** 网络连接测试 ****
网络适配器信息
适配器名称：          {E6238474-0F0E-4882-A736-658EEE96DF63}
描述：          Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC - 数据包计划程序微型端口
IP 地址：          192.168.1.100
子网掩码：          255.255.255.0
默认网关：          192.168.1.1
DHCP 已启用：          是
DHCP 服务器：          192.168.1.1
获得租约的时间：          Thu Jan 17 20:07:17 2002
租约到期时间：          Thu Jan 17 22:07:17 2002
DNS 服务器：          222.88.88.88
                    222.85.85.85
活动的连接：          LAN 连接
已连接：          是
在线：                    是
使用调制解调器：          否
使用 LAN：          是
使用代理：          否
防火墙信息
成功连接到 Apple 网站。
连接失败，无法浏览 iTunes Store。
发生未知错误（0x800B0101）。
连接失败，无法从 iTunes Store 购物。
发生未知错误（0x800B0101）。
无法连接到 iPhone 激活服务器。
发生未知错误（0x800B0101）。
无法连接到固件更新服务器。
发生未知错误（0x800B0101）。
成功连接到 Gracenote 服务器。
上次成功访问 iTunes Store 是在：2013-01-04 12:38:48。
这台电脑上的日期与时间的设置不正确。与 iTunes Store 的安全连接可能会失败。
**** CD/DVD 驱动器测试 ****
“LowerFilters”中没有驱动程序。
UpperFilters: GEARAspiWDM (2.2.3.0),
G: ASUS DVD-E818A4, Rev 1.00
驱动器是空的。
**** 设备连通性测试 ****
iPodService 11.0.0.163当前正在运行。
iTunesHelper 11.0.0.163当前正在运行。
Apple Mobile Device service 3.3.0.0当前正在运行。
通用串行总线控制器：
Standard OpenHCD USB Host Controller. 设备工作正常。
Standard Enhanced PCI to USB Host Controller. 设备工作正常。
找不到 FireWire (IEEE 1394) 主机控制器。
已连接的设备的信息：
小C, iPhone 4 (GSM)正在运行固件版本 6.0.1
序列号：          DX6JLS8HDP0N
**** 设备同步测试 ****
成功完成同步测试。

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Rescue And Recovery Installation On Clean Install Of Windows XP Service Pack 2

Hey,
I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
Any help would be greatly appreciated.
Cheers
Ash.
Message Edited by asin123 on 04-04-2008 10:45 PM
Moderator Note; Please do not duplicate posts - Thread locked.
Message Edited by andyP on 04-04-2008 02:11 PM

asin123 wrote:
I hope this solution is easy to follow and helps anyone who has had the same problems as me.
Thanks for coming back and sharing the solution with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Windows 7 Service Pack 1 installation

HI,
When i deploy Service Pack1 for windows 7 via SCCM, it gets installed in client machines. But when they restart, they are not getting the message "windows 7 service pack 1 is now installed" while logging in. But OS version is changed and in the
ARP, it shows the entry. When i login in the same machine (my ID has admin rights), this message is showing up.
Problem is when i target this machine in IE 9 collection, it is not getting deployed till the time i login in the client machine and click close in the message box. please suggest me what we should do to resolve this.
Thanks in Advance.
Regards,
Raja

How did you deploy the SP1? via SUP or Software Distribution？ What version does the System Properties show if you use the normal user's credential to open it? If it does show Windows 7 with SP1. It means the SP1 is installed successfully.
I assume the pop-up is just a reminder to tell us the SP1 finishes installing and somehow it needs admin or system account credential so that the normal user cannot see it.
Juke Chou
TechNet Community Support

Can't update AIR application on Windows XP service pack 3

We've run into another AIR update issue with our AIR 2.0.4 sidecar product.
Our application uses the standard ApplicationUpdater.checkNow() method to look for and download updates. Just such an update was issued recently, and one of our team members has reported an issue attempting to download the new update on a Windows XP service pack 3 machine.
They are getting an Error 16818.
Thanks for any insight.

Hi,
Error 16818 is "IO error while saving data to disk". Is there any way we could get the installer log from this machine? It might give us additional clues.
Thanks,
Chris

I have Firefox 12 on my Windows XP Service Pack 3 system, but some websites, like Gmail, state that I'm using an old browswer and need to update. Help?

Deleted Firefox 11, cleared cache, installed Firefox 12. When I go to the "About Firefox" tab, it says that I have FF 12 and that no updates are needed.
Computer: Windows XP 2002 Professional, service pack 3
Problem: Many websites, including this one, don't see FF 12. Somehow it thinks I'm running FF 3.0 and won't acknowledge the updates. It says I'm running an insecure version and the websites won't work (I'm typing now in IE because I can't submit this form in FF)

see : [https://support.mozilla.org/en-US/kb/websites-incorrectly-report-firefox-outdated-or-in Websites incorrectly report that Firefox is outdated or incompatible]
find and try : To reset your user agent (you can see analytical info) in "Other causes" in the above link.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HP UFT 12.02 not installing on Windows 7 Service Pack 1

HP UFT 12.02 is not installing on Windows 7 Service Pack 1. But the Install Guide says it supports and recommends Windows 7 Service Pack 1 as the Operating System.

Hey Hello Dear,
   Please upgrade UR windows 7 Service pack to Service pack 2.
   from my knowledge for SQL SERVER 2012 it requires Windows 7 service pack.
   And before installing SQL server 2012 Plz activate .NET framework for that,
   Put UR windows 7 Format CD then,
   Run Command prompt as Administrator and paste following cmd in that
DISM.exe /online /enable-feature /featurename:NetFX3 /All /Source:c:\net35 /LimitAccess
it will take 2 min. after that restart your PC and try to install SQL server 2012.
Note: Before installing SQL SERVER again format UR PC/lapy once.
After this if it gives error while installation then plz change ur setup and try again.
This will be helpful.
Best of Luck
Regards,
Sandesh

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

Forms 10g Installation issue on windows 7 Professional service pack 1

Similar Messages

Maybe you are looking for