Forms 10g runtime not working

I have 9i DB. And I was using developer(forms)6i with it. I uninstalled dev-6i and installed Developer Suite 10g. I connected dev-10g with my 9i DB. I migrated my 6i forms using forms migration assistant built in Dev-10g. Now i can login dev-10g but as I run a form it goes to my Firefox browser and says
"additional plugins are required to display all the media on this page".
I've googled the problem and searched otn as well. found a lot of solutions but none of them worked for me. can anybody tell me a real solution which surely work. I am a beginner in oracle so please try to be clear so my little mind can understand. God bless you.
Sorry I duplicated my post mistakenly.
Edited by: Gul on Dec 16, 2012 10:47 AM

As I click Install Plugins it says no plugins found and then I click install plugins manually and it takes me to this link
http://www.oracle.com/technetwork/java/archive-139210.html
there are so many links and then sub links in that page and i dont know which one i exactly have to install. i've tried some of them but nothing worked out.

Similar Messages

In dev server my payment advice form f110_prenum_chc is not working

hi,
friends i need urgent help.
1) i have copied f110_avis_in frm 000 client to 200 client with form name
   z_prenum_dup.
2) i have copied f110_prenum_chc frm 000 client to 200 client form name
zf110_prenum_chc1.
3) then i modified my both forms in 200 saved assigned TRs and
transported frm DEV server to PRD server(client 700).
4)in dev server 200 client my both forms are working
but in prd server 700 client my form cheque z_prenum_dup is
working but payment advice form zf110_prenum_chc1 is
not working.
5) but i can see my both forms r their in 700 prd server in se71 t.code.
6) if i run f-58 tr.code and by switching on debug mode i can see my
   cheque form but not payment advice form.
7) if i run in 200 client i can see my both forms.
can any body plz help me out of this issue.

Dear,
   I will be able to put some points, if you can give me some more idea about ur problem,
1, Does system giving any error..?
2, Can you see a preview..?
As I understood, it must not have any problem in transportation.
You can also check with Respective functional consultant whether he has done with required customization in NACE..?
One more thing you can do is,
open a program RSNAST00 and put break point at " PERFORM (tnapr-ronam) IN PROGRAM (tnapr-pgnam) USING returncode", here you can check at runtime ( While in debugging mode) the value of field TNAPR-FONAM, this value must be your SmartForm. If it is not the case then, there is problem with NACE settings and contact your functional counterpart.
Hope it's helpful .......Enjoy.
Regards,
Chetan

Reports who work in BIP 10G does not work in BIP 11G

Hi!
We are in the middle of going from BIP 10G to BIP 11G (latest patch installed the 9 of february). We have used the Upgrade Assistant to migrate the reports from 10G to 11G, about 80-90% are working directly.
But, as always are there some problems. There are 2 major problems I am struggling with for the moment. 1 is long running reports who gets "Connection reset by peer" before the report ends and the more problematic which is this:
[2012-02-27T11:09:50.397+01:00] [bi_server1] [ERROR] [] [oracle.xdo] [tid: 24] [userId: <anonymous>] [ecid: 22bf1318a95b3a18:-528a5dc9:135b0d15f61:-8000-0000000000025a30,0] [APP: bipublisher#11.1.1] XSL error:[[
<Line 80, Column 151>: XML-23002: (Error) internal xpath error
@Line 80 ==> <_G><xsl:if test="sum($G1[(./QADATE02 = current-group()/QADATE02)]/QATRQT) = '0'" xdofo:ctx="3">
[2012-02-27T11:09:50.397+01:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 24] [userId: <anonymous>] [ecid: 22bf1318a95b3a18:-528a5dc9:135b0d15f61:-8000-0000000000025a30,0] [APP: bipublisher#11.1.1] oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException[[
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1205)
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
     at oracle.xdo.template.FOProcessor.createFO(FOProcessor.java:1973)
     at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1117)
     at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
     at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:372)
     at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
     at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
     at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
     at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:477)
     at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:447)
     at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:267)
     at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:299)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor7820.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:917)
     at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
     at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:328)
     at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
     ... 40 more
Caused by: oracle.xdo11g.xqxp.XQException: XPTY0004
     at oracle.xdo11g.xslt.XSLStylesheet.flushErrors(XSLStylesheet.java:1850)
     at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:616)
     at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:551)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:345)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:194)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:230)
     at oracle.xdo11g.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:124)
     at sun.reflect.GeneratedMethodAccessor7820.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:920)
     ... 44 more
Does anyone have the solution for this type of error, we have about 30-40 reports that is behaving like this in BIP 11G but works fine in BIP 10G.
Can we do anything general in the BIP 11G or does we need to find the solution for each report and change in the template?
All ideas are appreciated, thanks,
Anders B

Hi!
Have everyone out there been able to use the upgrade assistant without any problem?
The UA.bat program says everything is ok but the report actually created in BIP 10G does not work in BIP 11G. We are looking for documentation or "findings" of what the problem can be, in a more general way. We are aware of that we probably have to fix this manually, but we dont know what to fix, and it is not so "fun" to be forced to re create all this templates and reports. The datamodell seems for the most of the time works, so we get a working xml source but the creation of the report thru the template dont work.
Best regards,
Anders

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working
Also when I click on More Info... button I I get support.apple.com website page, which is blank. When I click on the OK button, same result.
I need help with this, is anyone out there experiencing the same phenomena?

How about this one
Apple Java for Mac | MacUpdate
or
Java for OS X 2014-001

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

Is it still the case that the Muse CC Forms widget will not work properly unless you have Business Catalyst?

I am looking into options for our next office website redesign. We will definitely need a forms function. I downloaded the Muse CC free trial and went through all of the tutorials. The video on the forms (Contact Form) stated that the forms widget would not work or would not work properly if you do not have Business Catalyst. I'm hoping that has changed since the video was created.
Is this still true that you need to purchase the Business Catalyst product for Muse CC form widgets to work correcty???

Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application? You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Oracle Forms 10g runtime handling during RAC node failover.

Hi,
Forms version 10g R2 (10.1.2.0.2)
Oracle DB version 10g R2 RAC with 3 nodes.
If the RAC DB node that the user is connected to goes down, the user gets FRM-40733 and ORA-03114 error messages and the client forms application gets locked down/ goes in a loop with the error messages. The user has to close the browser to get out of the loop. I understand that this is the expected behaviour, but I'm wondering whether we can trap the error ORA-03114 and fire the "key-exit" trigger to get out of the application.
Have any one implemented a clean way to exit the Forms application when the RAC DB node goes down..?
I'm looking for some suggestions or an elegant way to handle the above failure.
Thank you in advance.
Sudhakar

Glen,
I haven't solve this one yet.I have been playing around with the following:
In my environment, I am still using 6i (not web) forms/reports.
My clients are XP, NT, 2000.
I have the forms/report runtime installed on their PCs.
Their TNSNAMES.ORA will be pointing to PRIMARY ( PDB)
If a SWITCHOVER or FAILOVER happens to the physical standby (SDB), I want a trigger to kick a batch file that will manipulate the TNSNAME.ORA on each clients stations.
On the standby
CREATE OR REPLACE TRIGGER change_tns
AFTER DB_ROLE_CHANGE ON DATABASE
DECLARE
role VARCHAR2(30);
dbname varchar2(100);
BEGIN
SELECT
DATABASE_ROLE,
DB_UNIQUE_NAME
INTO
role,
dbname
FROM
V$DATABASE;
IF role = 'PRIMARY' and dbname='SDB' THEN
dbms_scheduler.create_job(
job_name=>'move_sqlnet',
job_type=>'executable',
job_action=>'c:\temp\movetns.cmd',
enabled=TRUE
ELSE
-- if the standby >was< PRIMARY,
-- but the primary comes BACK on line,
-- need to reverse the step above.
END IF;
END;
As for the movetns.cmd
something like
rem -- attach to the workstation,
net use m: \\station name\share name
rem -- stdb_tnsname.ora would be pointing to STANDBY
copy stdb_tnsname.ora m:\orant\net80\tnsname.ora
net use m: /delete
rem -- need to do that for all workstations..
As you can see, there could be lots of problems with this procedure.
Client doesn't know about the failover, starts a RE-BOOT on the pc, therefore, the new tnsnames.ora will not get to client.. what to do for that client? Do i re-run the batch ...every hour?
tell me if you come up with an answer..
p-

InfoButton PJC Demos for Forms (tooltip buttons) - not working

Hello everybody,
I am new to using PJC and JavaBeans in forms. I have on my laptop Oracle Developer Suite 10g (10.1.2.0.1) and Forms Demos version 9.0.4.2.0 I downloaded from OTN. I studied InfoButton PJC application (buttons that show tool-tips at mouse-over).
Now, I want to create in one of my old forms such a button. I followed exactly the steps of the demo, that is:
1. I created a form with a button TEST_BUTTON for which I set the Implementation Class property to oracle.forms.demos.enhancedItems.InfoButton.
2. On the form's canvas I also created a text item named INFO with the following properties:
X Position = 255
Y Position = 107
Width = 100
Height = 100
3. At form level, I created the trigger WHEN-NEW-FORM-INSTANCE in order to set the button's properties as follows:
SET_CUSTOM_PROPERTY('CONTROL.TEST_BUTTON',1,'INFOBUTTON_TEXT','This is the tooltip text');
SET_CUSTOM_PROPERTY('CONTROL.TEST_BUTTON',1,'INFOBUTTON_FIELDPOS','288,128');
4. I created in my formsweb.cfg file a configuration section for my form.
[pjc_demos_dana]
pageTitle=OracleAS Forms Services - InfoButton Demo Dana
IE=jinitiator
baseHTMLJInitiator=demobasejini.html
archive_jini=frmall_jinit.jar,/forms/formsdemo/jars/infobutton.jar
form=pjclaunch_dana.fmx
width=675
height=480
separateFrame=false
splashScreen=no
lookAndFeel=oracle
colorScheme=blue
background=/formsdemo/images/blue.gif
When executing the form, the button has round margins as said in the documentation; at mouse over the cursor takes the form of a small hand but there is no tool tip. I receive no errors, only that it doesn't show the tool tip.
I don't understand why it's not working, what I did wrong ...
When setting the 'INFOBUTTON_FIELDPOS' property - input parameter X,Y - the documentation says: "This property should be set to a string containing a X,Y comma separated pair providing the location of the target field in pixels relative to the top left hand corner of the window. The X,Y pair simply has to define a point anywhere within the target field, it doesn't have to exactly define the corner".
What is the target field? The text item I created at step 2)? The documentation is not clear here ...
Any help will be appreciated.
Daniela

Dear Safwan Bhai,
As salaamo alaikum Rahamatulla hi burakathu!!
Actually I'm having a multi record block in which all the emp no., days of attendance, etc will be displayed when I click on the search button. My requirement is when point the mouse over the emp no, the emp name must be displayed as a Tool tip text. My fields are non-editable, so Post-Change is not working. I placed the coding in the When-new-item-instance - in this case the emp name is displayed, but only for the first field, when I move the mouse to second and third fields, the empname of that particulart field is displayed as a tool tip but in the first field only.
Any other suggestions?
Anyway I would appreciate your help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.

Forms 10G menu not showing submenus

I have a forms 10G application that is showing the main menu items but wont display the submenu items. The application works correctly on both a Linux (OAS 10.1.2.0.1) and a Windows (OAS 10.1.2.3) testserver.
After placing and compiling (without any errors) the application on a clients server the main screen is shown with the main menu items. However, clicking on the menu items won't open the submenus. The only menu item that works is the exit option which is not of command type "menu" but of command type "PL/SQL".
The menu's use security property is set to no.
Has anybody experienced this behaviour? What is going wrong?

There is a solution in MetaLink. See Subject: "Drop Downs Don't Work With Dual Monitors (Extended Desktop)".
Symptoms
When Forms application is dragged from a monitor to another in a dual monitor system, the drop down lists stops working
Cause
This issue was caused both by the lack of Multi-screen Setup Support in Java versions prior to JDK1.2 and by Bug 2772796 - Apps6: Drop Down Menus Invisible When Using Dual Or Multiple Monitor Setup
The bug is fixed in Forms 10.1.2.2 and beyond. It allowed the bounds to be calculated fine across the now available displays.
Solution
If using Forms version 9.0.4.3 then you can apply Patch 2772796 on top of it.
If using Forms 10.1.2.0.2 then upgrade to Forms version 10.1.2.2 or beyond.
Note: If using Oracle Applications 11i, please consult the solution rather in the Note 430179.1 - Drop Down Menus Invisible When Using Dual Or Multiple Monitors

OC4J Instance included in Forms 10g R2 NOT Stable

I am able to deploy a form for testing on WIndows 2003 Server.
C:\Documents and Settings\Administrator>C:\oracle\product\Ora10gDSR2\jdk\bin\java -Doracle.security.jazn.config=C:\oracle\product\Ora10gDSR2\j2ee\DevSuite\config\jazn.xml -Doracle.home=C:\oracle\product\Ora10gDSR2 -DORACLE_HOME=C:\oracle\product\Ora10gDSR2 -jar C:\oracle\product\Ora10gDSR2\j2ee\home\oc4j.jar -userThreads -config C:\oracle\product\Ora10gDSR2\j2ee\DevSuite\config\server.xml
06/10/25 00:00:06 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)
initialized
06/10/25 00:03:54 FormsServlet init():
configFileName: C:\oracle\product\Ora10gDSR2/forms/server/formsweb.cfg
testMode: false
06/10/25 00:04:04 ListenerServlet init()
06/10/25 07:56:50 Forms session <3> aborted: unable to communicate with runtime process.
I can run the Form initially but not after it has been deployed for about 8 hours. Is it true that OC4J supplied in Forms 10g R2 is only for testing purpose. How could I deploy the form in a more stable environment?

Yes it is true.
OC4J included in your iDS 10g is only for test or develop envrionment.
Its basic function is to make your builder tool ready to test your forms and module as well as your reports.
Just because iDS 10g its a web tool and it needs a web server to execute. So OC4J emulate the iAS (Internet Application Server) and give you the opportunity to TEST your modules without having a iAS.
Abdel Miranda
Panama.

"Find Form" calendar is not working after migration

Hi,
We have migrated from Oracle 9i to 10g.we have one form ''FormA" and "find form" for that FormA.Calendar functionality is present in both FormA and "Find FormA".if we try to use calendar functionality in "Find formA",its giving error like FRM-40104 - No such block calendar,FRM-40105(unable to resolve reference to item claendar.cell1.........),FRM-41045 (cannot find item - invalid id).Actually this scenario is not working after migrating the FORMS application to 'OAS10.1.2' from 'OAS904' .
In 'OAS904' ,The calendar item is present in the 'FormA' form, the 'calendar.show' hides the "Find FormA" and appears in the FOrmA and uses FormA's calendar item and after selecting the date,the date s applied to the "Find FormA"
But after migration, the "Find FormA" is not hiding, so its not able to retrieve the calendar properties.Because the calendar is present in "FormA".
Any problem with pll files like 'qmslib65','qmsolb65',qmsevh65'??
please help me by providing suggestions.
Thanks

qmslib65','qmsolb65',qmsevh65Are these libraries self-written or from some third-party tool?

Auto resize of form fields does not work as supposed

Back in the good old (?) days of compiling as Flash (as opposed to Flex 2) input fields in a form component could be made to streeeeeeetch automatically to fit the varying width of a model. If one chose "Fit contents = Fit width" for both the iview, and the specific form in the iview, then the fields in the form would resize to fit the width of the loaded window (which of course varies depending on screen resolution and window size).
Now we have upgraded to SPS 18 and I no longer am able to deploy as Flash (it fails at runtime) so I am left with Flex 2 (which is not a bad thing besides this one issue).
I have tried all possible settings for my iview and form layouts, but nothing works as it did with Flash. I simply cannot get the fields to resize.
Can anyone help?
Henning Strand

Just received this from SAP:
17.04.2009 - 09:20:53 CET - Reply by SAP
Hi Henning
Thanks for contacting SAP and providing with most of the details required to analyze the issue.
As per note 1235408,this is a known issue with Flex2.
Visual Composer UI elements are displayed relative to the browser size and not relative to each other.
Solution: None; there is no relative layout available for the Flex 2 runtime.
Workaround: Choose the "Actual size" option in the "Fit contents" list in the Configure task panel of the UI elements.
Please refer to the note for workaround on the issue.
See mentioned note if this also applies to your problem.
Henning

Form button does not work when a program is moved from Windows 8.2 to Windows 7

Hi,
I have a few Excel programs which use the ODBC to get data from Access and which have macros which writes data to an external program, MYOB.
When the macros tries to write the data to MYOB it fails if I am not running the program in administrator mode.   It seems that Windows 8.2 has a different level of security than Windows 7 and must be run in administrator mode for the ODBC to work.
I have had issues after running the program in administrator mode (testing) if I simply do a save (in administrator mode) and then send it to the customer.   The issue is that it just will not work on the customer's site.   I have gotten
around this in the past by saving any changes, going back out of excel, loading the program again (not in administrator mode) and saving it - before sending it to the customer.   This worked until now.
For some unknown reason, the last time I sent a program to the customer and carried out the above process, the program stopped working. Originally I thought that the macro just wouldn't work on windows 7, but eventually found that it is the form button
that will no longer work when the program is moved from 8.2 to 7.
Does anyone know why there is an incompatibility between 8.2 and Windows 7 and what I should be doing to ensure that my programs work in my customers environment(windows7)?
In the meanwhile, I have changed the form button to an activex button and the program works fine in both environments.
Thanking you in advance,

there is some OP report after Windows update Dec 2014 macro stop responding ( I cant confirm if this is also related to your issue) its because security update for Office maybe conflict with the active-x that you are installed
try to
Close Excel
Start Windows Explorer.
Select your system drive (usually C:)
Use the Search box to search for *.exd
Delete all the files it finds.
Start Excel again
Open that file and save it, and try open at Windows 7
to get more detail about this issue, I suggest also contact Office forum
this case also will be solve installing kb3025036
good luck

Form Personalization is not working for copied Sales Orders

Hi All,
We have a requirement in Sales Order form, if the order type is "Standard" then Ship method field should be mandatory.
We were able to do this using below form personalization, it is working for new order creation.
When we did the below testing it is not working
Inactivated the ship method and try to copy the order with Standard type the field remains mandatory and null but still it is allowing to book the Sales Order.
Please help to sort out this issue, let me know if it is not clear
Condition
Trigger Event : WHEN-NEW-ITEM-INSTANCE
Trigger Object: ORDER.SOLD_TO
Condition:
(:ORDER.ORDER_TYPE not like '%STANDARD%')
Action
Type : Property
Object Type : Item
Target Object : ORDER.SHIPPING_METHOD
Property Name: REQUIRED
Value: True
Thanks,
CSK

Hi CSK,
try it in well validate item trigger.
If that order type is list then you may disable the field in WHEN LIST CHANGED trigger itself.
Hope it will work,
Regards,
Soofi

Adobe forms layout editor not working

Hello
the layout editor in <b>sfp</b> transaction for adobe forms is not working... it says " could not open layout editor" .
can anyone plz suggest whether anything needs to be installed while installing the gui or any patch would do ...
or atleast where to find the patch ..
thanks in advance !

Hi,
Actually, after a bit more checking I've found SAP note 962763 with more detail.
You do need Adobe LiveCycle Designer and can download the installer from SAP Service
Marketplace:
http://service.sap.com/installations
Entry by Application Group
-> SAP NetWeaver
-> SAP NETWEAVER
-> SAP NETWEAVER 2004S
-> Installation and Upgrade
-> <Choose any OS and DB combination.>
-> Adobe LiveCycle Designer 7.1
Refer the links -
Adobe interactive forms tutorial
adobe forms
Adobe Forms
Regards,
Omkar.

Forms 10g runtime not working

Similar Messages

Maybe you are looking for