Forms 11g not picking up Registry.dat

Hi i have modified the Registry.dat to change the Default Font Face mapping section to include a new font. also i have set app.ui.lovButtons=true however forms11g does not seem to be picking up these changes. This works in forms 10
Anthony.

Is you form deployed on 64 bit server?
We have experienced in 64 bit there is problem in reading from registry.
~Lokanath

Similar Messages

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

HBR sequence on data form does not execute when Planning data form is saved

Has anyone experienced this issue before in Planning? Below I have included the scenario and what has been attempted to correct the situation.
We are using Hyperion Planning/Essbase 9.3.1, sequence contains 3 business rules - 2 executed on the Workforce Cube and 1 transfers totals from Workforce Cube to Main cube. 2 of the BR's contain run-time prompts - 1st BR in the sequence (calculation in Workforce) and 3rd BR in the sequence (transfer of Workforce totals to Main). We are using Projects to assign access priviledges to the BR's and sequences. All 3 business rules, as well as the sequence itself, validate successfully in the admin services console.
In Planning the data form contains BR Properties to "Save on Exit", "Use members on data form" and "Hide prompt". Have tried removing BR from data form, then put BR back on data form. Also tried building a new sequence in EAS console and attaching that BR to the existing data form. Neither of these attempts were successful. Tried building an entirely new data form with the newly created sequence, still unsuccessful. Was able to execute the sequence successfully when processed from the Tools -> Business Rules menu. Sequence was once again successful when I tried modifying the data form to remove property "Hide prompt". Problem with leaving the form in that state is, our users would not know which Planning server they were on as they access the Planning application through Workspace and we currently have 2 application servers in this environment - so essentially they have a 50/50 chance of selecting the correct server.
We have this same setup in another environment where the execution of the sequence on the data form works successfully. We have compared everything that I can think of and it all appears the same in both environments - in fact this used to be successful in this environment, but all of a sudden stopped working earlier this year - we have not applied any patches or upgrades to either environment. Do not know if this is relevant or not, but we do currently utilize Netscaler in both of these environments.
Any experiences with this type of situation or suggestions at this point would be greatly appreciated.

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

Pay_us_wages_w2_v is not picking current year data?

Hi,
pay_us_wages_w2_v tabe is not getting current year data, only is getting previous year data.
Like
SELECT sum(w2_wages_tips_compensation)
FROM pay_us_wages_w2_v puw
WHERE puw.assignment_id = 40291--:assignment_id1
AND
puw.year
= '2013'--TO_CHAR(:P_PAY_DATE_END,'RRRR');
Please let me know , if any body idea?. We have to run any Program?
Thanks,
Ramu

At first I was not happy. I didnt understand how it worked. I wanted to keep my unlimited. It may not work out for everyone but it does for me. I have two accounts. one has 5 lines and the other has two. I pay 150 for two lines on one account. I have the 30 dllr 2 gig package. Then I have a dumb phone for the second line. My other account I have 5 smartphones. I pay around 350 for that account.
Now with the new plans I can combine BOTH accounts into one and make one BIG family plan. All the users in my account do not go over 2 gigs except one but he never goes over 5. Ill get a big data package and save some money. On top of that its UNLIMITED minutes and text which is what we use it for. Ill be paying around 350ish with a big data package..
That is 150 dllrs in savings!! Now since I can add usage controls I can control how much data that one person uses.
Not sure about you guys but to me this is #winning status!

PAYABLE OPEN INTERFACE IN R12 NOT PICKING INTERFACE TABLE DATA ...

The data is getting loaded into interface tables. But while importing from interface tables to base tables using "Payables Open Interface Import " receiving the log message
Enter Password:
MSG-00000: 0 invoice(s) were created during the process run
MSG-00000: 0 invoice(s) were fetched during the process run
MSG-00000: summarize flagN
MSG-00883: After Repport Trigger: Setting the Org Context to Multiple
The invoices are not getting loaded into base table. Checked table ap_interface_rejections. There is no data present in this table.
Can some body on this forum help.
Thank you in advance.
Thanks and Regards,
Sreenivas Muppasani
91-9731068499

Hi Sreenivas and Raju,
there are two related documentations available in oracle, first states it could be a Report Cache issue which needs to be cleared, another one was a bug where patch application was suggested .....
Can you check the references link and confirm that is not the cause ... if not try entering minimal (mandatory) information alone on the interface table and attempt importing ....?
References:
APXIIMPT - Payables Open Interface Import In Error [ID 1307261.1]
R12AP: Interface Does Not Copy The DFF Values From Lines To Distribution. [ID 1457398.1]
Regards,
Ivruksha

Data Merge not picking up all data fields

Hi,
I've been having a problem, posted here: http://forums.adobe.com/thread/1217090
Essentially, I have been using the script 'CSV2Tables' to prepopulate simple 2 column tables with information drawn from a CSV data source.
The tables consist of a title, and a block of information about that specific subject. Many of the blocks of information I am importing also contain data tags (<<DataTag>>)
The plan is to use CSV2Tables to populate the tables, then change data source and run a normal ID Data Merge to replace all of the <<tags>> within the tables with information from a second CSV data source.
The problem is, CSV2Tables is importing the data and prepopulating the tables just fine, but the data tags that are found within each body of text are being picked up as plain text (as Peter Spier has pointed out, they are being drawn from a plain text stream rather than being dragged from the Mail Merge panel) so when I try to run the ID Mail Merge, none of the fields are found within my document.
My question is - is there a method, or script available out there that can essentially do a Find/Change within a document, and replace plain text that appears like this <<PlainText>> with a Data Tag that is recognised by ID, which will allow me to run a Data Merge?
I have been told to check out some of the commercial plugins available out there, but registering and setting up demo's would require me to contact our IT provider for each, and that would be an exhaustive process.
Any help is much appreciated.

Hi,
is modyfied
Array.prototype.find = function (string) {
    for (var s = 0; s < this.length; s++)
        if (this[s] == string) return s;
        return -1;
var mFrames, mFile, mDoc, mFields, mFieldsNames, mStory,
     mPlainTxt, mNameToCompare, mField_ID;
// edit this with proper .csv path
mFile = File(Folder.myDocuments + "/" + "Merge.csv");
mDoc = app.activeDocument;
mDoc.dataMergeProperties.selectDataSource(mFile);
mFields = mDoc.dataMergeProperties.dataMergeFields;
mFieldsNames = mFields.everyItem().fieldName;
mFrames = mDoc.textFrames.everyItem().getElements();
for (var i = 0; i < mFrames.length; i ++) {
    if (!mFrames[i].name.match(/TF\d*$/) ) continue;
    // script assumes a targered text boxes are named like: TF1, TF2...
     // (TF plus any integer) or just TF (no integer)
    // - they could have the same name
    // any other name exludes frame from this loop
    mStory = mFrames[i].parentStory;
    app.findGrepPreferences = null;
    app.findGrepPreferences.findWhat = "<<.+?>>";
    mPlainTxt = mStory.findGrep(true);
    for (var k = 0; k < mPlainTxt.length; k++) {
        mNameToCompare = mPlainTxt[k].contents.slice(2,-2);
        mField_ID = mFieldsNames.find(mNameToCompare);
        if (mField_ID > -1) {
              mField = mFields[mField_ID];
            mDoc.dataMergeTextPlaceholders.add (
                mStory,
                mPlainTxt[k].insertionPoints[0],
                mField
        mPlainTxt[k].remove();
script assumes a targered text boxes are named like:
TF1, TF2... (TF plus any integer) or just TF (no integer) -
- they could have the same name.
Jarek

Query is not picking up right data from the cube

Hi Bi expert,
I added one infoobject (0cust_group) on the cube and when I display data through manage option on RSA1 transaction, I can see that the infoobject nicely populated. But when running query, its coming under Not assigned customer group (s). Could you please help me on this matter? I have activated cube and update rule and even generated the query using transaction RSRT.
Thanks for your help.

How do you fill the customer group char in your rules?
1 - using master data of customer or 2 -datasource sending it from R3?
case 1:
check that 0customer attributes are filled and active ( objvers = A)
case 2: check it in r3 using RSA3 transaction, to see if it is extracting it?
derya

Forms not picking up change in library

In 11g Forms instance the forms all call a common library pll. A minor change was made, but the forms are not picking up the change.
Any ideas why?
I dropped the library and re-added it to a form and it works, but this is not practical for several hundred forms.

Are you sure the plx file is in the FORMS_PATH directory?
Did you attach the library to the forms without the path?
If you are on Windows, you can use sysinternals to see which files are actually read. It solved quite a few problems for me, especially with multiple Oracle Homes on one machine.
There is probably a utility like that for Linux too.

Forms are not opening if one of the 2-node 11gR2 DB instance is down

recently we have upgraded database from 2-node 10gR2 RAC to 2-node 11gR2 instance.
But, if one of the instance is down, the forms are not picking up the 2nd node and forms are not opening.
Can someone help me to fix this issue as its PROD.

Hi,
Please send the output of below command, run this in your application node.
"tnsping MMAPPS_BALANCE"
Your SID_BALANCE TNS-ENTRY should look like below on the application server. Below is just for example of 3 node rac. You should not edit tnsnames.ora file manually, if you configure your context file properly, autoconfig will generate properly.
LABDB_BALANCE=
        (DESCRIPTION=
            (ADDRESS_LIST=
                (LOAD_BALANCE=YES)
                (FAILOVER=YES)
                (ADDRESS=(PROTOCOL=tcp)(HOST=node2-vip.hingu.net)(PORT=1522))
                (ADDRESS=(PROTOCOL=tcp)(HOST=node1-vip.hingu.net)(PORT=1522))
                (ADDRESS=(PROTOCOL=tcp)(HOST=node3-vip.hingu.net)(PORT=1522))
            (CONNECT_DATA=
                (SERVICE_NAME=LABDB)

Sub:ck11n not picking the routing automatically

Hi Guru,
Create cost estimation (ck11n) ,not picking the routing data automatically

Dear Jothi,
Goto OKKN,check for the costing variant under quantity structure control tab,whether the routing selection ID is assigned properly.
Say if selection ID is 01 and the first priority is for N task list type(that's normal routing),then the system will pick it automatically.
Likewise if it fails to find N,then it searches for the second priority given in the same selection ID.
This is how it picks for costing in CK11N,Also check the routing status in CA03,under header whether it's 4 - released and usage
is for 1 production.
Check and revert
Regards
S Mangalraj

Encounter problem when running test.fmx in Oracle form 11g

I am new to Oracle form 11g and encounter a problem regarding testing the Form Services.
I have Oracle form 11g (deployment mode) on my app server. I opened 'Run a form on the web' and clicked 'Run form' to conduct a test with default values suggested by the screen. Then I got the below screen showing 'An add-on for the website failed to run'.
Is the problem in relation to IE setting? or is my set up of Oracle form 11g not OK?

Hi ,
This community is to discuss Weblogic Server specific issues, you can post this query Forms in for better response in the below link:-
Oracle Forms (MOSC)
Regards,
Prakash.

I need to download forms 11g

Hi
can any one send me the link to download Oracle forms 11g?
Edited by: [email protected] on Jul 16, 2009 10:01 AM

Sorry for my Mistake. I mean forms 11g not 11i.
the link you send to me forwards me to Oracle Fusion Middleware 11gR1 Software Downloads.
when i open the [age i found three download links :
1-Oracle WebLogic Server 11g Rel 1 (10.3.1) Net Installer
2-Oracle JDeveloper 11g Rel 1 (11.1.1.1.0) (JDeveloper + ADF)
3-Fusion Middleware 11g Rel 1 (11.1.1.1.0) Software Downloads
Which one contains oracle forms 11g?
Thanks in advance

Calculations on fillable forms sometimes not working

I have a fillable form for a Deposit Slip. The user enters data about each deposit including the amount and type. The problem is, if the user of the form randomly clicks on fields to enter data instead of using the Tab to move sequentially from one field to the next; this seems to cause the total fields at the bottom of the form to not correctly sum the data on the form.
Is there a way to deal with this? A way to calculate or re-calculate the form at the end of entry or possibly force the user to Tab through the entire form before the totals appear?

Empty or null fields are assumed to be character strings and not number strings.
The "+" operator in JavaScript is both the addition operative and the concatenation operative. If there is any string value, the computation with the "+" operator becomes a concatenation of strings.
If you are using JavaScript you have to force the empty values to the number format using the "Number" constrictor, the "+" prefix or multipling the field by 1.
event.value = Number(this.getField("Text1").value) + (+this.getField("Text2").value) + (1 * this.getField("Text3").value);
The first 2 options for calculations have the above or a similar process to force null strings to zero or to ignore text values.

Button Icons not show in Form 11g run time

Button Icons not show in Form 11g
I installed the following tools :-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle Portal,Forms,Report,and Discoverer Services (11.1.1.4.0)
1. Create a "icons" folder and place all gif images in there :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\<icons>
2. Within icons i made a jar file of all gif images :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\icons\jar -cvf frmicons.jar *.gif
3. Copy this new jar file into :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\
4. Edit formsweb.cfg file:
imageBase=codebase
archive=frmall.jar,frmicons.jar
5. Edit Registry.dat file:
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
After doing above configuration i create a form and place an icon on the button.
Set button's icon property = Yes and give name of icon without extension.
When i run the form not display icons who configure icons.
Please give the solution how to set icons on button.
Thanks & regards,
Java console message :-
Java Plug-in 1.6.0_25
Using JRE version 1.6.0_25-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Shiv
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Forms Session ID is formsapp.8
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
Forms Applet version is 11.1.2.0
FRM-92471: unable to load image exit for iconic button item

Duplicate post. Refer to comments in Push Button Iconic not show in Forms 11g

Font "Verdana" is not working - Oracle forms 11g

OS : Windows XP 32 bits - SP 3
Forms : 11.1.2.0 - Development
I'm using the font "Verdana" for some items in a form. When i test it, forms keeps using another font (arial). However, other fonts do work.
These are the lines in the registry.dat file:
default.fontMap.defaultFontname=Dialog
default.fontMap.defaultSize=900
default.fontMap.defaultStyle=PLAIN
default.fontMap.defaultWeight=PLAIN
default.fontMap.appFontnames=Courier New,Courier,courier,System,Terminal,Fixed,Fixedsys,Times,Times New Roman,MS Sans Serif,Arial default.fontMap.javaFontnames=MonoSpaced,MonoSpaced,MonoSpaced,Dialog,MonoSpaced,Dialog,Dialog,Serif,Serif,Dialog,SansSerif
Is there another file to check. On internet, i found some info about the font.propeerties file, but there's no one in the directory used for 11g installation. There are two files named "font.properties", but located in the forms 6i directory, so i'd say these are not the files i need to check.
Anyone can help? Thanks

This is mostly an Apple issue and you should discuss it with them. Oracle Support has authored some documents on the subject, but because it is really an Apple issue, you probably will be best served contacting them. Basically, Apple has put Java on lockdown. If you want it to work make some setting changes. There are numerous web site that are talking about the new restrictions. A simple Google search will get you started.
http://www.google.com/search?q=apple+safari+won%27t+run+jre
http://nakedsecurity.sophos.com/2012/10/18/apple-gets-aggressive-latest-os-x-java-security-update-rips-out-browser-support/
http://joshuaesmith.tumblr.com/post/29549611105/applets-will-not-run-from-the-local-disk-in

Forms 11g not picking up Registry.dat

Similar Messages

Maybe you are looking for