Forms 11g & soa suite 11g in one domain?

Has anyone tried to put both Oracle forms and soa suite in one domain. This will make management somewhat more easy as you can use one instead of two administation servers.

I suppose it would work in theory, but I doubt it would be supported.
John

Similar Messages

Weblogic Domain not getting created in SOA Suite 11g R2

I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan

Configure OSB 11g to use the same domain as SOA Suite 11g

Hi,
A quick question on OSB Installation and extend the weblogic domain created for soa for OSB also. Please guide me what i am following is the correct path.
I followed the soa 11g and osb 11g installation doc from Eric Elzinga blog also checked oracle doc. Am quite confused about the directory structure to cofigure SOA Suite 11g and OSB 11g.
After SOA suite install , I Configure Oracle SOA Suite by following the below path
Run: middleware/wlserver_10.3/common/bin/config.exe (followed the blog ON OSB 11g Installation from Eric Elzinga).
I have seen another path to configure soa suite from oracle doc
SOA_ORACLE_HOME\common\bin\config.cmd
eg: E:\oraclehome\11g\middleware\Oracle_SOA1\common\bin\config.cmd
both directory str are correct?
After OSB installation , to configure OSB , I choose to reuse the SOA Suite domain to extend it with the Oracle Service Bus components. so in that case , is it the right directory structure I am following is
<Middleware_Home>\oracle_common\common\bin\config.bat.
eg: E:\oraclehome\11g\middleware\oracle_common\common\bin\config.bat
Thanks in advance
jk

Eventually you configure the weblogic domain always (either it is for SOA or OSB or BPM or all), so you should use middleware/wlserver_10.3/common/bin/config.exe
Regards,
Anuj

How to configure something similar to optSoapShortcut in SOA Suite 11g

Hi,
We are migrating processes in BPEL 10g to composites in SOA Suite 11g (11.1.1.5). In one of these processes we are extracting the ws-addressing elements replyTo and MessageID from the SOAP header from the calling process and saving these values into a database. They are later used to be able to reply back to the calling process. In 10g this was no problem but in 11g calls between processes are automatically optimized, meaning that they are not communicating using SOAP. Hence, it seems like we can't get the soap headers the normal way.
According to the Administration Guide for SOA Suite 11.1.1.5 the optSoapShortcut property has been removed which could be used in 10g to specify if the calls should be optimized or not. Is there any other way to configure this in SOA Suite 11g?
If not, is there any way to instead extract these elements from some BPEL API or similar?
Thanks!
Best wishes
Kerstin

For release 11g, SOAP optimization is automatically configured. Therefore, if you upgrade your projects from 10g to 11g and are using the optimized shortcut approach in existing applications, note that optimized calls are activated only when the hostname value (as referred to in the WSDL URL in the composite.xml file) matches the Server URL value. Either set both values to the hostname (for example, myhost) or to the full domain name (for example, myhost.domain.com). If these values do not match, a regular SOAP call is performed instead of an optimized local call.
You can still control this using oracle.webservices.local.optimization property.
http://docs.oracle.com/cd/E15586_01/web.1111/b32511/configuring.htm#WSSEC3522
Refer to "Controlling When Local Optimization is Used"

Failed to initialize the application 'soa-infra' for SOA suite 11g

Hello experts!
Having followed the steps in http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1,
upon starting the cmd scripts, I received among others the following error message:
<BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;
     at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.preStart(JpsApplicationLifecycleListener.java:76)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:277)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
     at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
     at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.NoSuchMethodError:
I have searched but only to find a change permissions hint which did not work for me. SOA 11g - SOA-INFRA is not starting
Any helping hand available?
Thank you very much in advance!
The fuller log follows:
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <WebLogicServer> <Hera> <> <main> <> <> <> <1270482051581> <BEA-000214> <WebLogic Server "soa_server1" version:
WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Notice> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170019> <The server log file C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Diagnostics> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051691> <BEA-320001> <The ServerDebug service initialized successfully.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051753> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2">
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3s" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "http" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "https" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiop" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiops" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldap" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldaps" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "cluster" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "clusters" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "snmp" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "admin" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <RJVM> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051862> <BEA-000570> <Network Configuration for Channel "soa_server1"
Listen Address          :8001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-002609> <Channel Service initialized.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051941> <BEA-000436> <Allocating 5 reader threads.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051942> <BEA-000446> <Native IO Enabled.>
####<5 Απρ 2010 6:40:52 μμ EEST> <Info> <IIOP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482052098> <BEA-002014> <IIOP subsystem enabled.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053408> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053751> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_VFJSY8asFO+H8NVntiPFSkiIk0o=>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053923> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053985> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054453> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054469> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server soa_server1 for security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Notice> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090082> <Security initializing using security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <XML> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-130036> <Initializing XMLRegistry.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <messaging.interception> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054765> <BEA-400000> <Initializing message interception service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055015> <BEA-280050> <Persistent store "_WLS_soa_server1" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\default" writePolicy="Direct-Write" blockSize=512 directIO=true driver="wlfileio2">
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001135> <Initializing the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001137> <Initialization complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001138> <Resuming the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001140> <Resume complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055264> <BEA-190000> <Initializing J2EE Connector Service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055280> <BEA-190001> <J2EE Connector Service initialized successfully>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055327> <BEA-040305> <JMS service is initialized and in standby mode.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055342> <BEA-040090> <Deployed 8 default connection factories.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040306> <JMS service is active now.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055389> <BEA-101128> <Initializing HTTP services.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101135> <soa_server1 is the default Web server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101052> <[HttpServer (defaultWebserver) name: soa_server1] Initialized>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101129> <Initializing the Web application container.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: Logging service enabled.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC security service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220027> <Web Service reliable agents are started on the server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMX> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055467> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.1.2:8001/jndi/weblogic.management.mbeanservers.runtime .>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055483> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055514> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055530> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482056684> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] E

Thank you for your reply!
The tutorial emphasizes that I need jdk 1.6 update 11 in order to setup.
The newer release of wl server comes with jsk 1.6 update 14.
When I tried to run:
setup -jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_14
no setup screen appeared.
Next, I setup stand alone jdk 1.6 update 11 and add it to path,
but setup -jreLoc C:\Program Files\Java\jdk1.6.0_11 failed too, since no setup screen appeared
So I uninstalled version 10.3.2, installed 10.3.1 to follow exactly the tutorial specs.
Does one has to pay oracle consulting, in order to have an installation of soa suite up and running for development?
Edited by: Nick Aiva on Apr 6, 2010 11:27 AM

SOA Suite 11g Clustering error/oracle bug ?

Hi, i got several experiment to implement soa suite 11g clustering, in my company.. at this moment we still use development mode in our application server. now i'm trying to get into production and also i want cluster the server.. here is the chronology what i do.
i got 3 server :
my plan is
server #1 become an proxy server, let say the name is soa_proxy
server #2 become an cluster node, let say the name is soa_server1
server #3 become an cluster node, let say the name is soa_server2
so i start install & configure it (applications is running under Windows Server 2003)
1.*soa_proxy*
- Installing WebLogic server
- Installing SOA
- Create Repository with RCU (oracle 10g database)
2.*soa_server1*
- Installing WebLogic server
- Installing SOA
3.*soa_server2*
- Installing WebLogic server
- Installing SOA
after installation finished, then i create domain in soa_proxy server let say it name 'MyDomain', then i assign the soa_server1 and soa_server2 in cluster node named 'MyCluster', also i assign the soa_proxy server as a HTTP Proxy Server.. i'm following the instructions just like this link Link: [http://download.oracle.com/docs/cd/E12839_01/doc.1111/e13925/config_screens.htm#CJAEABGD]
all the installation seems good, but when i try to deploy my composite application into the proxy server 'soa_proxy' with JDev, i got error like this
Image: !http://img9.imageshack.us/img9/2122/error2z.jpg!
and when i go to Http://hostname:7001/em
i just see my composite deployed only in 'soa_server2'.
UPDATE : well, now the error was gone when deploying. but we still got little odd result,
when i deploy with jdev, it still fine, until i go to the enterprise manager. yess still.. my composite only deplyed in 'soa_server1'. i got some reference that we can copy the domain directory in soa_proxy and then paste into the server that not yet been deployed before. its seems oke..
i've been thinking, how if i got 10 node of cluster? 50 node of cluster ? should i copy the directory just like that ?? is there another charmed way to do it???
can somebody help me with this simple case?
regards
Wildan
Edited by: wildsoft on Feb 12, 2010 11:33 AM
=======
here is my last trial to deploy the cluster environment, then i just got the same issues, our team here think thats the issues causing by oracle bug in code behind. for reminder what i do last experiment
1. we deploy/configure the domain (admin console,cluster node) then starting up all the services smoothly without no issues & as we saw in the console monitor we can see the cluster is syncronizing.
2. then we create simple composite.
3. we try to deploy the composite to the cluster domain, and what we got is the composite only deployed in one cluster node.
let me describe to clear it,
* first trial, when we deploy the composite, here is what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
in JDev we also saw this message (the project CompositeLabTest Deploy Process is skipped), some kind like that
* second time trial, we try to shut the SoaServer2 down, then restart it, what we got in em console
*[-] SoaInfra (SoaServer1)*
[+] CompositeLabTest
*[-] SoaInfra (SoaServer2)*
[+] CompositeLabTest
. so until today my soa suite 11g clustering experience is never going good practice.. any of you may had experience with clustering too, how that can be done? please respon...
thanks
regards
Wildan Abdat
Edited by: wildsoft on Apr 27, 2010 4:08 PM
Edited by: wildsoft on Apr 27, 2010 4:13 PM

Hi there.
Me too I have a similar problem with cluster deployment.
I have two different domains in two different phisical machine on the same LAN.
These domains are equals and the sole difference is regarding the IP configuration:
domain 1
machine 172.0.0.1
soaadmin 172.0.0.1
soa1 172.0.0.2
soa1 172.0.0.3
domain 2
machine 172.0.1.1
soaadmin 172.0.1.1
soa1 172.0.1.2
soa1 172.0.1.3
When I try to deploy a new composite from the EM this fails (it remains in waiting for a response like the followed)
<Jun 18, 2010 10:42:00 AM CEST> <Warning> <org.apache.myfaces.trinidadinternal.context.RequestContextImpl> <BEA-000000> <Could not find partial trigger idArchiveFileBrowserDialog from RichInputText[UIXEditableFacesBeanImpl, id=idArchiveLoc]>
Processing sar=/tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Adding sar file - /tmp/dir2448127768139530528tmp/sca_SOAComposite1_rev1.0.jar
Creating HTTP connection to host:172.0.0.2, port:10002
What I checked:
In multicast configuration soa1 (domain1) sent the request to all soa servers in the LAN (even in that one that aren't configurated in his domain)
In unicast configuration soa1 (domain1) sent the request only to the soa2 (domain1) server but it remain in waiting for a response for all the time.
What it is strange is that if I stop the domain2 the request can be performed and my composite is deployed in both the servers.
Any idea about this strange behaviour?
N.B.
I'm not using Coherence.

SOA Suite 11g HA install and EDNDataSource problem

Hi all,
We have installed and configured Oracle SOA Suite 11g (11.1.1.5) cluster per the instructions in the Enterprise Deployment Guide and Anthony Reynold's blog (http://blogs.oracle.com/reynolds/entry/installing_an_11g_soa_cluster). We are encountering constant XA and DBLocker related errors with the EDNDataSource:
<Dec 1, 2011 2:35:29 AM MST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "EDNDataSource" failed with exception: "oracle.jdbc.xa.OracleXAException".>
<Dec 1, 2011 2:35:29 AM MST> <Error> <oracle.soa.mediator.common.listener> <BEA-000000> <DBLocker caught exception while locking messages
java.lang.NullPointerException
at oracle.tip.mediator.common.error.ErrorDBLocker.lock(ErrorDBLocker.java:82)
at oracle.tip.mediator.common.listener.DBLocker.lockMessages(DBLocker.java:113)
at oracle.tip.mediator.common.listener.DBLocker.run(DBLocker.java:77)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
These errors occur every couple of seconds on both SOA hosts. Additionally, we see errors on one of the hosts, complaining about EDNDataSource not being clusterable:
<Dec 1, 2011 2:35:29 AM MST> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an object under the name weblogic.transaction.resources.SOA1.EDNDataSource_soa_domain in the JNDI tree. The object from -6284322550635925010S:soa11g-dev-1.domain.com:[8001,8001,-1,-1,-1,-1,-1]:soa11g-dev-1.domain.com,soa11g-dev-2.domain.com:soa_domain:SOA1 is non-clusterable, and you have tried to bind more than once from two or more servers. Such objects can only be deployed from one server.>
We have ensured that the database (we are using a single Oracle 11g database instance, not RAC) has XA support enabled. Beyond this, we haven't found any leads on this forum nor the Oracle support site (we have opened an SR with Oracle). I've seen a couple of other threads related to this issue over the last year (e.g., Re: JTA - XA Rources - Rollbacks reason and What is the purpose of EDNDataSource in SOA 11g? but no resolution was ever posted.
Does anyone have any suggestions of where to being looking to troubleshoot this issue? Any help would be most appreciated!
Thanks,
--Gary

How are you starting the server? Using start script - ./startManagedWebLogic.sh soa_server1? Make sure that classpath is getting set properly.Yes, after using the script to start the admin server.
How do I make sure the classpath is getting set properly? Seems to be the actual problem, but from the logs when the server starts up the command seems correct from what I can see. If I knew which jars contained the classes it needed I could try and look for them in the start command.
11g is not certified on Ubuntu. Please refer below link for certification matrix -I actually wished Oracle could certify the installers for Mac OSX (just for development), but I guess I could try and get things up on Redhat instead. :P
Thanks for the input.

Problems servicing EJB requests on SOA server. SOA Suite 11g.

Hi all
I recently installed SOA Suite 11g on my Windows 7 machine for a project that will be employing SOA, BPM and EJB services. I created a new SOA domain with an admin server and a managed SOA server. When creating the domain, I specified BPM Suite, SOA Suite, Enterprise manager, WSM Policy Manager and JRF to be included as per project requirements.
SOA and BPM project have been deployed to and are working fine on the SOA server, but I observed the following odd behaviour when I tried to deploy and use a Java EJB service: -
1. Via the admin console, I successfully deployed my EJB ear to the managed SOA server and can see it in the JNDI tree of the server.
2. When I try to invoke the EJB from a remote client, the service is successfully located via JNDI and a request is sent, but it is as though the service then simply swallows the request and does nothing with it. No output is returned from the EJB service and none of the logging from the EJB service appears in the logs. No errors are reported on the console or in any of the Weblogic logs that I have looked through.
3. I tried deploying the ear to the admin server instead and invoking it with the same client. This time it works absolutely fine.
4. When messing around with setDomainEnv.cmd, I accidentally removed jrf.jar from the classpath. When the SOA server subsequently started, this caused lots of errors while deploying the SOA components, but my EJB service worked with no problems on the SOA server. When I correcteed the classpath and restarted, the original problem returned.
It seems as though a conflict is occurring, which I am pretty baffled by. I would be very grateful for any advice or suggestions on this issue.
Many thanks
Jon

Hi Jon
I don't know the root cause of this issue. But try this and see if it works. Undeploy this EJB EAR application from weblogic admin console. Then Login into EM Console. And in EM Console, expand weblogic domain and select your soa server under this folder and right click and try to Deploy your EAR. And then access the EJB.
We have some BPM Applications where we have one Workflow project that we deploy from EM Console. This BPM App also have lots of EJB projects. We deploy all of them as single EAR from em console under weblogic domain. So far we have not faced any issues.
Thanks
Ravi Jegga

Configure .p7b(PKCS #7 Certificates) in SOA Suite 11g - Enterprise Manager

Hi,
currently configured .jks file in em - weblogic domain - security - security provider configuration which is used by owsm policy to validate my incoming signed soap message.
(incoming message is signed with the same jks file). so it is working fine.
Now I got .p7b(PKCS #7 Certificates) file from customer, so I need to replace this with my existing .jks file. How can I do this?
Appreciate your quick inputs.
Thanks

customer site is invoking my soa suite application,public portion of the certificate which I got from them I configured at my end(.p7b converted in to jks). with the private key (which I do not have with me) the customer site is signing the soap request and hitting my soa suite.
Getting following error in my soa suite side(soa_server1-diagnosis):
X509 Certificate will not be advertised due to underlying exception "oracle.wsm.security.SecurityException: WSM-00057 : The certificate, abc.org, is not retrieved. The following aliases are found in the keystore:- [defnet.org, klmca.org, abc.org, ]".
while converting in to jks I gave alias, I do not know what value should I give. I found
subject: CN=abc.org... in .p7b file, used the same name as alias.
converted .p7b file in to .cer as suggested by anuj, .p7b file contains 3 certificates,so imported 3 times in to same key store file like this
keytool -import -alias abc.org -file xyz.public.cer -keystore xyz-keystore.jks
keytool -import -alias klmca.org -file klmca.public.cer -keystore xyz-keystore.jks
keytool -import -alias defnet.org -file defnet.public.cer -keystore xyz-keystore.jks
Where I am doing wrong here?
Can I configure directly .p7b(PKCS #7 Certificates) file in enterprise manager (soa suite 11g ps3.). I converted in to jks file and configured but it is not working.
Please suggest. This is urgent. Appreciate your quick help.
Edited by: 798585 on May 20, 2011 12:00 AM

Using Oracle 8i DB in SOA suite 11g

Hi All,
Good Morning.. Hope all are doing good.
I need a permanent solution or some work around for my below issue:
We were on SOA suite 10.1.3.4 and now we are migrating to SOA suite 11.1.1.5
We have legacy system which has Oracle 8i DB.
For some of our interfaces we are using this 8i DB for intergration.
But 11g SOA suite doenst support Oracle 8i DB.
But is there any option or any sort of work around so that we can use this?
Any option, suggestion, work around are most welcome.
Hope I will have some options to try with, and resolve this issue.
Thanks all for your valuable time spent on my issue.
Cheers,
Chandru

Hi Chandru
1. Yes, what you want is very much possible. I would like to clarify few things hopefully if you are not already aware of this.
2. Earlier SOA 10g is on top of Oracle's OAS/OC4J. Now SOA 11.5 is on top of the Weblogic Server app server which is from BEA. When you create SOA 11.5 (or any soa 11.x domain), to store all meta-data you need atleast 2 minimum schemas in some Oracle Database like SOA_INFRA, MDS. These schemas are created using a giant utilty sql script(s) called RCU (Repository Creation Utility). Now this RCU can work only with Oracle 10g and 11g databases and NOT oracle 8i DB. But remember this is only to store all the Process/Task information in Meta-Data tables which you hardly change or modify.
3. So go ahead and upgrade to SOA 11.5 and use latest Oracle 11g or 10g database for RCU. Now comes your old legacy usecase, which needs some data from Oracle 8i db. This means it is a custom application or custom usecase that connects to Oracle 8i. From Weblogic Admin Console, you can create something called Data Source (having a connection pool) and give DB Host, port, sid, username/password of your 8i db. And choose Oracle 10 g thin drivers. If I am not wrong, Oracle 10g drivers should support oracle 8i db also. Using this DataSource JNDI name, you can do pretty much everything either from Java Code, EBJ code or from the Workflow application.
4. As other users mentiones, you can always use DB Adapter to connect to this 8i DB. Worst case, I am not a DB Expert. But in Oracle 11g or 10 g database, I wonder if you can create like a DB Link to connect to your old 8i Database. DB experts can help here.
5. Finally if none of the above solutions work, you can always write a simple JAVA/EJB code to connect to your database in very primitive way directly giving db host, port, sid, username, plain text password and if required add 8i DB oc4j jar in classpath. Then use java embedded or ejb adapter to pull this data into your bpel process. Hopefully you may not end up here.
In conclusion, yes it should be possible to access your data from 8i database but SOA Domain should point to ORacle 10g/11g DB only though for its meta-data etc.
Here is a post for similar case but for OBIEE 11g that wants to create Reports from 8i DB:
Re: Regarding OBIEE compatibility with Oracle Database version 8i
Thanks
Ravi Jegga

OracleBAMAdapter Configuration problem in SOA suite 11g

Hi,
In Oracle SOA suite 11g(11.1.1.2.0), OracleBAMAdapter configuration using WebLogic server console is resulting in the following error
* An error occurred during activation of changes, please see the log for details.
* [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
Steps used for configuration:
1) Modify adapter configuration using navigation:: Deployments -> OracleBAMAdapter -> Configuration -> Outbound Connection Pools -> oracle.bam.adapter.adc.RMIConnectionFactory -> eis/bam/rmi
2) Specified connection properties with BAM server port details
HostName localhost
InstanceName ADCServer1
Password welcome1
PortNumber *9001*
UserName weblogic
In config.xml (%Domains%/soa_domain/config/) , I could see the following library entry
<library>
<name>[email protected]</name>
<target>AdminServer,soa_server1</target>
<source-path>K:\OracleFMW\Oracle_SOA/soa/modules/oracle.soa.workflow_11.1.1/oracle.soa.workflow.wc.jar</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</library>
Could you please help resolving this issue?
Regards
Naveen

I do not think that would qualify as a solution :-). I was negligient in deploying Work Flow Application, and was not deselecting the checkbox in 11.1.1.2.0 JDeveloper, which reads out like "Deploy to all the servers". Thus it was trying to deploy it to BAM server as well as the Admin Server. I had to deselect it. It's pretty mundane thing that I was missing.
Warm regards.

B2B Console "missing" in SOA SUite 11g R1 PS3?

I have a brand new SOA SUite 11g R1 PS3 installation, using the following installation steps:
OracelXEUniv
WebLogic Server 10.3.4.0
SOA Suite 11.1.1.2
SOA Suite 11.1.1.3
SOA Suite 11.1.1.4
Created a new single server domain using teh new 11.1.1.4 developer template
I can start the weblogic console, no problem
I can start the enterprise manager console, no problem
when I try to start the B2B Web Console http://localhost:7001/b2bconsole, or http://localhost:7001/b2b I get the 404 HTTP error - the console applicaitn is not found
Can someone, please, suggest what I am missing?
Thanks in advance

Hello Michael,
I analyzed this issue and found that it is working as designed. Developers templates are designed for low memory hosts and hence certain applications like b2bui, composer, OracleAppsAdapter etc. does not get deployed by default. If a user wants to use these applications then he may target and deploy them manually from Weblogic Admin console.
As these applications may not be required for all users who installed SOA (because SOA installable contains many components of SOA like BPEL, Mediator, Rules, Workflow, B2B and BPM Suite as well and a developer may not be interested in using all these applications), so these apps does not get deployed by default.
For the benefit of other users of this community, I have blogged about the same here where you may also find steps that how to enable these applications -
http://anuj-dwivedi.blogspot.com/2011/02/b2b-consolesoa-composer-not-opening-up.html
Thanks for bringing this issue up here in this forum.
Regards,
Anuj

Performance tuning of BPEL processes in SOA Suite 11g

Hi,
We are working with a customer for performance tuning of SOA Suite 11g, one of the areas is to tune the BPEL processes. I am new to this and started out with stress testing Hello World process using SOAPUI tool. I would like help with the below topics -
1. How do I interpret the statistics collected during stress testing? Do we have any benchmark set that can indicate that the performance is ok.
2. Do we need to run stress tests for every BPEL process deployed?
2. Is there any performance tuning strategy documentation available? Or can anybody share his/her experiences to guide me?
Thanks in advance!
Sritama

1. How do I interpret the statistics collected during stress testing? Do we have any benchmark set that can indicate that the performance is ok.
You need
pay attention to:
java heap usage vs java heap capacity
java eden usage vs java eden capacity
JDBC pool initial connections vs JDBC pool capacity connections
if you are using linux: top
if you are using aix: topas
2. Do we need to run stress tests for every BPEL process deployed?
yes, you need test each BPEL. You can use "Jmeter" tool.
Download Jmeter from here: Apache JMeter - Apache JMeter&trade;
Other tools:
jstat
jstack
jps -v
Enterprise Manager
WebLogic Console
VisualVM
JRockit Mission Control
3. Is there any performance tuning strategy documentation available? Or can anybody share his/her experiences to guide me?
I recommend "Oracle SOA Suite 11g Performance Tuning Cookbook" http://www.amazon.com/Oracle-Suite-Performance-Tuning-Cookbook/dp/1849688842/ref=sr_1_1?ie=UTF8&qid=1378482031&sr=8-1&keywords=oracle+soa+suite+11g+performance+tuning+cookbook

Message Ordering or Singlton Service in SOA Suite 11g

In SOA Suite 10g, JMS Adapter could behaviors as Singleton instance by setting the properties "XclusterGroupId".
In addition, set Routing Service to be Synchronous execution, therefore only one instance consuming the Target message queue sequentially.
Does this properties still take effect in SOA Suite 11g, as I didn't find this properties being mentioned through Adapter Technology documentations?
Otherwise are there any other solutions for the Message Ordering?
Thank you in advance.
-Simon
Edited by: user8408910 on Jul 13, 2009 1:31 AM

Is it the same answer for JMS topic listeners? i.e. each new message on the topic should be processed once and only once by a Composite deployed to a cluster with >1 server instances.
Thanks for info,
Todd

SOA Suite 10g and SOA Suite 11g? what are the major changes in these two?

Hi Experts,
I am keen in knowing about Soa Suite 11g. SOA Suite 10g and SOA Suite 11g, BPEL changes? what are the major changes in these two product/tool wise? Is now OSB is part of Soa Suite 11g? it would be helpful for us to know what are the major changes and updates or modifications came in 11g.
Please share this valuable information.
Is there still any version is in progress from Oracle, which is yet to be officially launched from oracle?

what are the major changes in these two product/tool wise? Few major changes to enlist are that SOA suite 10g was using Oracle Application Server (OC4J) however 11g is on Weblogic and 11g is based on SCA. B2B is now part of SOA suite itself and OSB can share a domain with SOA. You may refer below link to know few more -
http://blogs.oracle.com/soabpm/2010/03/11gr1_patchset_2_111130_soa_fe.html
Is now OSB is part of Soa Suite 11g? OSB has a separate installer but can share a domain with SOA and SOA-direct binding is also supported now. Refer below link to know more about new features in OSB 11g -
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/osb.htm#CJACHEHJ
Is there still any version is in progress from Oracle, which is yet to be officially launched from oracle?No major release is planned. Patches for 11g R1 may come.
Regards,
Anuj

Forms 11g & soa suite 11g in one domain?

Similar Messages

Maybe you are looking for