Forms 6i and Reports 6i for Window Vista

Dear!
How can I find out the software of Oracle Forms 6i & Oracle Reports 6i & Oracle Database 9i which supports Windows Vista 32-bit Edition.
Please Helpme...

Paul M. wrote:
Why so old (and desupported) products ?Because they work?
I've known sites that don't upgrade until the version they're upgrading to is desupported - at that point it's mature and has almost all the bugs found and either fixed or workarounds identified.
Another possibility is that their application relies on features of client/server, and 6i is the last client/server version.
We're still using Forms 6i for a combination of those two reasons. Client/Server will rise again! After all, dumb terminals have made a comeback (sorry, it's called webforms these days).
:)

Similar Messages

Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

Hi!
I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
Thanks...

I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

Download forms and reports 6i for Windows XP

hi guys,
I have just installed Windows XP, then I installed the Forms 6i, but I can't connect to the Oracle 9i DB,
the Net Easy Config is OK, Easy Config can test the connectioin successfully.
I try to download the latest Form 6i from the download sites, but I can only find Linux, Unix, NT version.
I am wondering are there any Forms 6i for Windows XP or 98, or just not let us download them ???

yes

Photo and Contact manager for Windows Vista

I have a Mac but, was helping some people I know set up their iPod Classic and was wondering what Photo and Contact manager on a PC is used to sync to Windows Vista.
Thanks,
Barry

I have had the same issue, this is the work around that cleared it on the t61p
a) downloaded TVT SU 3.14 exe package from Lenovo web site
- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel...
- the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758
b) un installed power management
c) un installed TVT SU and cleared directory under http://forums.lenovo.com/lnv/board/message?message.uid=135306
d) installed the TVT SU package
e) launched the TVT SU and it downloaded TVT PM and other stuff

How to create Rescue and Recovery disc for Windows Vista Home Basic with G530 Lenovo Laptop?

Hi All,
I have purchased G530 Lenovo laptop 2 weeks back.
I coudn't find installation/recovery discs in my laptop box.
I went across the forums and came to know that it is not available now-a-days as it was coming previously.
So, anybody can help me, how to create a recovery disc?
This is needed when I format my laptop.
Thanks in advance.
Regards,
Umesh.

Click on what used to be the "Start" button and search for "create" or "recovery". It took me a while to find it but it is there.
Use a cd for the first disc and 2 DVD's for the other discs.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

HT6001 After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

How to install oracle Forms and Report 10g in windows XP OS

How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
Rajeev

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

Difficulty installing Rescue and Recovery 4.2 patch for Windows Vista

Which between System Update Installation History and Post-Installation Status Report should I believe, when they tell a different story?
When I run thinkVantage System Update, the post-intallation status report indicates that the following fails to install:
* Rescue and Recovery 4.2 patch for Windows Vista
* ThinkVantage Client Security Solution for Vista SP1
* Lenovo Wireless WAN Activation Patch
However, when I open the ThinkVantage System Update History Log, I read that the above updates have been installed.
Which one should I believe?
I'm willing to believe that the update has been installed, but whenever I run System Update, I keep getting the same message that the above three need to be installed.
Should I keep ignoring the message? If not, what else could I try?
I have a T60 running Vista with SP1 installed.

Hi privard,
Thanks for your feedback. Anyhow, let me see how i could help to sort this out for you.
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

Which register cleaner or tune up software is the best to use for windows vista,windows 7 and windows 8.1 as professional?

hi,
I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
I like to know the proffesional version of it which I can use for my clients every where unlimitted to clean unwanted keys of registry and improve performance.(specialy in Dutch language).
thanks
johan
h.david

I second what Kate Li said. There's no need for a registry cleaner! Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
This tool can be used to disable things you don't need.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

BDB support for Windows Vista, WIndows 7 and Windows Server?

Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
Akira

Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB

Can Developer 6i(Forms and Reports) be installed on Vista

Can Developer 6i(Forms and Reports) be installed on Vista??
If yes, then which version?
Please answer..........

Hello,
Developer 6i can be installed on XP/NT/2000 but not on vista, you can try and see if get lots of errors. You can also try installing latest developer suite (10.1.2.0.2) but once again you might face some issue but it worth trying.
Regards

Installing Forms and Reports 6i on Windows Me

Has any one found a work around to install Forms and Reports 6i on Windows Me, I keep getting an error message. I already have Oracle 8i Personal Edition 8.1.5 installed and working on my machine.
Thanks,
Brent

Hi Jan,
I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
Hope this helps,
Frank

Compatability for Forms-5 and Report-3

Does Forms-5 and Reports-3 connect to Oracle-8i.I get a message Ora-03121 no interface driver connected function not performed when trying to connect.
So please suggest

I can't find any matrix (as these are de-supported versions) but I have worked on Forms 5.0 and reports 3.0 with Oracle 9.0.1. And there were no issues. Thus, I may dare assume it should work with 9.2.0.8 as well, which is the terminal release for Oracle 9i.

Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

Post Author: albe
CA Forum: General
When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
thanks in advance,
Alberto

Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don

Forms 6i and Reports 6i for Window Vista

Similar Messages

Maybe you are looking for