Forms 6i and windows 7 registry problem

Hi,
We are using forms 6i patch 14 on windows 2008 R2/windows 7. The only problem is that the form reads from "HKEY_CURRENT_USER\SOFTWARE\ORACLE" key instead of "HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\" like it should, and did on XP/2003.
Is it plausible to change that because we use that forms with windows terminal services and cannot set the "HKEY_CURRENT_USER\SOFTWARE\ORACLE" key for every new user.
Thanks

Unfortunately the whole thing (forms 6i) is desupported.
Oracle Forms 6i 6.0.8.x (Doc ID 228666.1)
Error Correction Support (ECS):     31-JAN-2005
Extended Support (ES):     31-JAN-2008
Extended Maintenance Support (EMS):     31-JAN-2007
except:
E-Business Suite Customers:
E-Business Suite customers using Oracle Forms 6i will remain supported, for 11i related issues only, for the lifecycle of E-Business Suite 11i.
You should look at which shows only 10gr2 and certain 11 versions are certified on certain windows 7 installs.
Forms / Reports Builder 10gR2 or 11g Certification on MS Windows 7 (Doc ID 1112213.1)
In some cases forms 11 and 10 are certified. read it. it's complicated.
release 11.1.1.2+ is supported on Windows 7 (32 bit) for single user only.
The Forms / Reports Development Environment of release 11.1.1.3+ is supported on Windows 7 (64 bit) for single user only.
You must use:
the 32 bit distribution of Weblogic (10.3.3+ along with a 32 bit JDK, do NOT use a 64 bit JDK)
as well as the 32-bit distribution of FMW 11g PFRD (11.1.1.3+)
Certification of Oracle Developer Suite 10g (10.1.2) has now (Feb 2011) been completed for Windows 7 with version 10.1.2.3.
Presently the certification is for Windows 7 32-bit only. (See the Certification Guide link above to confirm 32-bit/64-bit certifications).

Similar Messages

Detection of windows registry problem

I'm using illustrator 5.1 on PC (win 8.1). Currently the software has prompted with the message issuing the detection of windows registry problem. I can still use it if I choose allowing it to get fixed immediately. But it still prompted every time I open it. What can I do to fix it as I lost the installation disc?

I was finally able to solve this by:
1. copying a Sun/swdp directory from a different computer to this one.
2. tried to uninstall, this failed.
3. reinstalled swdp over this directory, specifying server integration. This failed.
4. reinstalled swdp over this directory, specifying no server integration. This succeeded.
5. uninstall. Delete swdp directory.
6. reinstall fresh.

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

ITunes and Windows Vista problem

I have Windows Vista and ran iTunes successfully for 8mos. Now I'm getting a message box that says "iTunes has stopped working. Close box and Windows will send a solution." The solution, upgrading Windows, doesn't work. Is Vista the problem?

Scan and Fix windows System files:
Can you go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair or update files.
Start iTunes again

Iphone 5 and windows 8 problems

I am having syncing problems with my iphone 5 and windows 8.

whats your exact setup as in how do you do it?
what do you do?
what result do you expect?
what result do you receive ?
how does what you receive differ from your expectation?

T430u and Windows 8 Problems

Hi everyone,
Really need some helps here. I bought a T430u , and to be honest, i'm rather dissapointed with this. My keyboard was dead in a matter of weeks, so i've just get it back from the sevice centre. And now I have another problems:
1.Cannot wake up from sleep
I've read on another sites that I have to disable expresscache and quick start, but then it'll make the ssd caching useless isn't it? And yet after I uninstall expresscache and disabled quick start, it still doesn't solve my problem. Now it'll wake from sleep but will crash and restart.
2.Glitchy trackpad
On some occassion, the trackpad just stop working for 1 - 5 minutes. And then it'll work again. Now I mainly use mouse, but seriously...
I've upgraded all the lenovo driver and windows update too. But it doesn't solve anything...

Hi centraldogma,
Welcome to Lenovo Community. I'm assuming that the system is still under warranty. I would suggest calling Tech Support to see if they can help you troubleshoot the problems. If that doesn't help perhaps they can advise about the last option of returning the system.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Adobe Acrobat 5.0 and Windows 7 Problem

How do I get Adobe Acrobat 5.0 and Windows 7 compatible so I can access my attachments to e-mails sent to me?

I was successful in installing AA5 in Win7 Starter as a test. It works except that I changed the printer port to file (AcroTray or the Distiller Assistant of AA5 does not work in Win7). You can open the files that are created in Distiller to create PDFs. You may be able to use watched folders to automate the process to some degree.
I suspect that your question is more of having problems reading PDF files in AA5. That is a different issue. It is not a Win7 compatibility issue, but one of needing a newer PDF viewer. I have AA5 on one XP machine that I use Reader X on for seeing the newer files. I do have to deal with some conflicts between AA5 and ARX, but I can deal with that (many folks lose there minds on that).
There is one other option that might be a major problem. Many folks are getting Win7 on 64-bit machines. In that case, you will have to be sure AA5 runs in 32-bit compatibility.
At least that should give you some ideas of what might work. If a 64-bit machine, you may definitely have a problem -- I never tested that combination.

SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
Please any help because i dont know what to do any more..
My best regards

Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

Compatibility forms 6i and Windows Server 2008

Hi,
We want to change our Server from 2003 to Windows Server 2008 64bits.
My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
Will the migration be successfull, or will we have some bugs?
Thks for your help.
O.

YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

Primairy IDE and Windows Install Problems!

Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
I orderd all my stuff from newegg.. I got:
Intel 775 Socket 2.8ghz Prescott
ECS Mobo (psh model)
2x 512mb DDR 3200
Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
Chaintech GeForce 6600 GT video card
Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
Aspire-X Dreamer II Case
Rosewell DVD/CD-RW combo (very cheap).
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet ".
When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
What the hell?
I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
Has anyone else had any errors like this? Thanks - Erik

you skiped the part about him buying the msi board.
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem. I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

JSP and Windows registry

Hi,
To put it in a simple manner, I have a plain jsp page with two radio buttons. Also I have a program (dll) that can read/write a certain value in the Windows registry. I need to put this two pieces together so the radio button selection depend on the value in the registry and then, according to the selection, the value to be reset in the registry.
How can I do that?
Thanks for your time,
MGalois

Use the JNDI service provider for Windows Registries. See link at http://java.sun.com/products/jndi/serviceproviders.html

Audigy 2 ZS Platinum and Windows 7 problems

Hi there,
Recently upgraded to a new PC and Windows 7, and am gutted that the audio/interface card no longer seems to work. I mean, it works for simple listening duties, but the Line In/Mic, "What You Hear" etc., are all registered as "currently unavailable". I home record a radio show, so I'm in a panic to get the card working properly. I'd have to downgrade to XP.
The current drivers available are listed as working for Windows 7 on the Creative site, not sure they should be up when they don't.
Any sign of a resolution for this, or ideas what I could do?

/ Came up with something of a partial fix for this.
Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
Be nice to get all the functionality back though!

Olite ODBC driver and windows service problems

Hi,
I use the SOA Suite 10.1.3 and when I try in my code to locate BPEL Processes by instances using the following code:
WhereCondition where = new WhereCondition(SQLDefs.CX_index_1 + " = ?");
where.setString(1, deployedId);
// Find Instances
IInstanceHandle[] instanceHandles = locator.listInstancesByIndex( where );
I get this error message:
<ERROR> <default.collaxa.cube.engine.data> <BaseCubeInstancePersistenceAdaptor::listInstanceMetaData>
java.sql.SQLException: [ODBC S1002] invalid column number
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCResultSet.thinGetData(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCResultSet.getVal(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCResultSet.getString(Unknown Source)
<ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "finder": Cannot find instances.
An attempt to fetch the instances using the where condition "index_1 = ?" from the datastore has failed. The exception reported is: [ODBC S1002] invalid column number
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_cx WHERE ci_domain_ref = 0 AND index_1 = ?
ORABPEL-04002
Cannot find instances.
An attempt to fetch the instances using the where condition "index_1 = ?" from the datastore has failed. The exception reported is: [ODBC S1002] invalid column number
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_cx WHERE ci_domain_ref = 0 AND index_1 = ?
     at com.collaxa.cube.engine.adaptors.common.BaseCubeInstancePersistenceAdaptor.listInstanceMetaData(BaseCubeInstancePersistenceAdaptor.java:1199)
     at com.collaxa.cube.engine.data.AdminFinder.__listInstanceMetaData(AdminFinder.java:387)
     at com.collaxa.cube.engine.data.AdminFinder.listInstancesByIndex(AdminFinder.java:629)
     at com.collaxa.cube.ejb.impl.FinderBean.listInstancesByIndex(FinderBean.java:250)
     at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at FinderBean_RemoteProxy_4bin6i8.listInstancesByIndex(Unknown Source)
     at com.oracle.bpel.client.Locator.listInstancesByIndex(Locator.java:602)
     at com.oracle.bpel.client.Locator.listInstancesByIndex(Locator.java:571)
     at webUI.CheckProcStatus.findInstance(CheckProcStatus.java:85)
     at webUI.CheckProcStatus.doGet(CheckProcStatus.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: [ODBC S1002] invalid column number
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCResultSet.thinGetData(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCResultSet.getVal(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCResultSet.getString(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCResultSet.getString(Unknown Source)
     at com.collaxa.cube.engine.util.DBUtils.sql_getString(DBUtils.java:63)
     at com.collaxa.cube.engine.data.AdminFinder$InstanceMetaDataLoader.load(AdminFinder.java:120)
     at com.collaxa.cube.engine.data.AdminFinder$IndexMetaDataLoader.load(AdminFinder.java:142)
     at com.collaxa.cube.engine.adaptors.common.BaseCubeInstancePersistenceAdaptor.listInstanceMetaData(BaseCubeInstancePersistenceAdaptor.java:1179)
     ... 39 more
It looks like there is a problem with the ODBC driver of Olite. I tried to see the configuration parameters in the Windows ODBC Data Source Administrator but when I click on the Configure button, the window closes and nothing appears. When I use another program (Aqua Data Studio) to query the Olite DB, everything works fine as long as I use basic queries without a "where" clause. When I use a "where" clause, windows opens a message box complaining about memory access error from the "olsv2040.exe", which is the Olite windows service, and it stops the service.
There is also this error message when I launch the SOA Suite and it comes to the part of loading the BPEL processes:
Loading processes for BPEL domain "default" ...
<2007-04-30 18:48:54,551> <INFO> <default.collaxa.cube.engine.deployment> Process "TaskManager" (revision "1.0") successfully loaded.
07/04/30 18:48:55 30 Apr 2007 18:48:55 - org.apache.commons.transaction.file.FileResourceManager - EMERGENCY - Recovering status information from 'C:\product\10.1.3.1\OracleAS_1\integration\esb/oraesb/artifacts/work/metadata/[B@266395/transaction.log' failed! Could not find file
07/04/30 18:48:55 30 Apr 2007 18:48:55 - org.apache.commons.transaction.file.FileResourceManager - EMERGENCY - java.io.FileNotFoundException: C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\work\metadata\[B@266395\transaction.log (The system cannot find the file specified)
07/04/30 18:48:55 java.io.FileNotFoundException: C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\work\metadata\[B@266395\transaction.log (The system cannot find the file specified)
07/04/30 18:48:55      at java.io.FileInputStream.open(Native Method)
07/04/30 18:48:55      at java.io.FileInputStream.<init>(FileInputStream.java:106)
07/04/30 18:48:55      at org.apache.commons.transaction.file.FileResourceManager$TransactionContext.recoverState(FileResourceManager.java:1471)
07/04/30 18:48:55      at org.apache.commons.transaction.file.FileResourceManager.recoverContexts(FileResourceManager.java:1219)
07/04/30 18:48:55      at org.apache.commons.transaction.file.FileResourceManager.recover(FileResourceManager.java:441)
07/04/30 18:48:55      at org.apache.commons.transaction.file.FileResourceManager.start(FileResourceManager.java:394)
07/04/30 18:48:55      at org.apache.slide.store.txfile.AbstractTxFileStoreService.connect(AbstractTxFileStoreService.java:135)
07/04/30 18:48:55      at org.apache.slide.common.AbstractServiceBase.connect(AbstractServiceBase.java:120)
07/04/30 18:48:55      at org.apache.slide.store.AbstractStore.connect(AbstractStore.java:216)
07/04/30 18:48:55      at org.apache.slide.common.AbstractServiceBase.connectIfNeeded(AbstractServiceBase.java:192)
07/04/30 18:48:55      at org.apache.slide.common.Namespace.connectService(Namespace.java:524)
07/04/30 18:48:55      at org.apache.slide.common.Namespace.retrieveStore(Namespace.java:623)
07/04/30 18:48:55      at org.apache.slide.common.Uri.parseUri(Uri.java:347)
07/04/30 18:48:55      at org.apache.slide.common.Uri.<init>(Uri.java:66)
07/04/30 18:48:55      at org.apache.slide.common.Namespace.getUri(Namespace.java:671)
07/04/30 18:48:55      at org.apache.slide.common.Namespace.getUri(Namespace.java:651)
07/04/30 18:48:55      at org.apache.slide.common.Namespace.loadBaseData(Namespace.java:782)
07/04/30 18:48:55      at org.apache.slide.common.Domain.initNamespace(Domain.java:845)
07/04/30 18:48:55      at org.apache.slide.common.Domain.init(Domain.java:432)
07/04/30 18:48:55      at org.apache.slide.common.Domain.init(Domain.java:366)
07/04/30 18:48:55      at oracle.tip.esb.server.bootstrap.slide.SlideHandler.initializeSlide(Unknown Source)
07/04/30 18:48:55      at oracle.tip.esb.server.bootstrap.slide.SlideHandler.checkSlideInit(Unknown Source)
07/04/30 18:48:55      at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.setupRepoURLScheme(Unknown Source)
07/04/30 18:48:55      at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.setupRuntime(Unknown Source)
07/04/30 18:48:55      at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.initializeESB(Unknown Source)
07/04/30 18:48:55      at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter$PingTester.run(Unknown Source)
07/04/30 18:48:55      at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
07/04/30 18:48:55      at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
07/04/30 18:48:55      at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
07/04/30 18:48:55      at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
07/04/30 18:48:55      at java.lang.Thread.run(Thread.java:595)
<2007-04-30 18:48:55,923> <INFO> <default.collaxa.cube.engine.deployment> Process "TaskActionHandler" (revision "1.0") successfully loaded.
<2007-04-30 18:48:56,785> <INFO> <default.collaxa.cube.engine.deployment> Process "MainPatient" (revision "1.0") successfully loaded.
A file transaction.log is missing. It's strange because when I installed the SOA Suite, it never complained about the installation of the files. How can I re-install this file or generate it without installing the whole SOA Suite?
I am sorry if my message is too long, but all these problems are related to the Olite DB. Is there a way to re-install the ODBC drivers and the service without re-installing the whole SOA Suite?
Any would be greatly appreciated.
Amir

Ok, after having installed the Oracle XE database and configured the data-sources of the BPEL PM. I still had the same error message complaining about invalid column number. I changed the code and put directly the connection pool:
DataSource dataSource = (DataSource)_initialContext.lookup("java:comp/env/jdbc/BPELServerDataSource");
Connection con = dataSource.getConnection();
Statement stmt1 = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs1 = stmt1.executeQuery("SELECT cikey, process_id FROM admin_list_cx WHERE index_1='"+deployedId+"'");
And now it works! The row is found and no error. I am wondering, is there a problem with my code (it worked with the former BPEL PM API 10.1.2) or is there a problem with the function listInstancesByIndex of the Locator object or something else (look at the Exception trace). Did somebody successfuly used this method of locating processe's instance using the index_1 parameter with the 10.1.3 API?
Cheers.
Amir

Forms 6i and windows 7 registry problem

Similar Messages

Maybe you are looking for