Forms 6i Client Server works in Win7 64 bits but Runtime (Ctrl-R) not

My installation of Oracle Forms 6i Designer works fine, but within the Designer the Runtime option (Ctrl-R) simply nothing happens.
In Task Manager there is a process "ifdbg60.exe" but not the corresponding screen opens.
If I run the Runform directly (outside of the Designer) this problem does not occur.
Does anyone have any suggestions to help me solve this problem?
Best regard
Zilmar Furquiim

Well, version 6 of Designer, Forms, Reports, etc, are not supported for use on Win7 and further, were desupported several years ago. If you really want to use this obsolete version on Win7, rather than hacking a solution, I would recommend using WinXP Mode or other virtualization option.
http://www.microsoft.com/windows/virtual-pc/default.aspx

Similar Messages

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

I tried to airdrop Civilization V from a Macbook Pro with Mountain Lion to a Macbook Pro with Lion and it doesn't work. Other apps have but Civ V has not.

Likely because it's a not self contained and/or it's game and copy protected, so install it via the developers instructions instead, which likely means it will have ot be uninstalled off the first machine, the developer contacted for a new license key before installing on the newer machine.
If you want it on both machines, you will need to likely buy another license.
Most developers are fine with transfering license between machines, you have to contact them.
They just want to make sure it's only on one machine so they are not getting robbed.

Do you have a fix for the problem with Avast. Because soon I will just start using IE since Avast has worked fantastic for me. But I would rather not.

Question
Do you have a fix for the problem with Avast. Your upgrade process notifies me that it is not compatible with Avast so I always delete it. Soon I will just start using IE since Avast has worked fantastic for me. But I would rather not. Please help.

Avast needs to update their Web Rep add-on for Firefox 5.0.
You can look at the new pre-release version of Avast for Firefox 5.
* http://forum.avast.com/index.php?topic=80362.0

Downloading MUSE failed so I uninstalled (WIN7 64 bit) but application manager doesn't recognise it

Downloading MUSE failed so I uninstalled (WIN7 64 bit) but application manager doesn't recognise it has been uninstalled so I can't re-install

What version of the Adobe Application Manager do you currently have installed? You can find the version by going to C:\Program Files(x86)\Common Files\Adobe\OOBE\PDApp\core. Once there please select the PDApp.exe and right click and select properties. You will find the version number listed under the details tab.

Oracle Forms 6i client/server against an Oracle 10gR2 database

Hello
We have the following situation:
Oracle Forms6i/Reports6i client server application against an Oracle 8i cost-based database. we want to migrate this application
step 1:
Migrate the database to 10gr2, but do not touch the client application
Go live
step 2:
Migrate the development environment to 6i webforms.
Production environment stays client server.
With this construction we can still create new patches/functionality.
step 3:
Migrate to Forms10gR2 (and reports)
I know Forms 6i is not supported anymore.
My question is on step 1.
When I read NOTE: 338513.1 entitled "Is Forms/Reports 6i Certified To Work Against Oracle Server 10g Rel 1, Rel 2 or 11g?" carefully
it says that Forms 6i is not certified against 10gR2.
On OTN I read several posts that this works ok (assuming you do not use the wrong character set).
I also read on OTN that patch 18 (which is only supported for EBS customers) is certified against 10gR2.
The questions:
- Is Oracle Forms patch 18 certified against an Oracle 10gR2 database? (or only for EBS)
- Is there anybody out there that can confirm that Oracle Forms 6i C/S works against Oracle 10gR2
Regards Erik

Thank you.
Now I found it.
But how do I read that page.
It says:
Client Certifications
OS      Product      Server Status
XP      6.0.8.27.0 Patch 18      N/A      Desupported
Application Tier Certifications
OS      Product      Server      Status
XP      6.0.8.27.0 Patch 18      9.2      Desupported
XP      6.0.8.27.0 Patch 18      10g      Desupported
I read this as follows:
Patch 18 was certified agains a 10g database in a webforms environment.
No client server mentioned and Server 10g , so no 10gR2!
I'm I right?
Regards Erik

Running 9i Form in client server env

I have instaled Oracle 9i DS on Win NT.
I have created a form using 9i form.
When i run the form it get a message "FRM-10142 - HTTP listener is not running on xyz machine at port 8888"
This means that my form will run in a web based (thin client) env where as i want to create an application that is suppose to run in a client server env not on web browsers.
Please guide me how can this me done.
I am a new one to oracle DS. your help will be a good start for me
Samir

Forms 9i only runs on the web - it does not provide a way or running applications client server

Creating a hyperlink in Forms 6i Client Server

I need to create a link to a webpage from a 6i Client Server Form. I would also like not to have to specify a certain browser. Some people using this may have IE and others Netscape.
Any ideas?

I don't know if this is exactly what you're looking for but see the hyperLink java bean http://otn.oracle.com/products/forms/

OLE Alternatives in Forms 6i Client Server

I'm fishing for some advice and maybe some examples of how to get around an OLE issue that's adversely affecting an upgrade project.
We're currently migrating a Forms 4.5 application to 6i. This application displays MS Word documents (OLE Container) that are stored in the database and uses OLE to open manipulate, and save the documents back to the database. We've come across some serious problems with OLE and 6i that don't look like they'll be fixed any time soon (bug #2615804 in particular).
Since OLE (ActiveX) is not supported a web delivered configuration, we're looking at an alternative to interacting and storing Word documents using a client/server configuration. This will have the added bonus of making the move to web delivery once we decide to go down that path.
Has anyone out there had any good experience with overcoming this OLE problem? It seems like every pre-Forms 9i book out there has touted OLE as a way of interacting with Office tools and now OLE has become a roadblock.
I've had a look at the JACOB example, but that doesn't really help if you're not deploying via the web.

With the beans you've looking at visual stuff : like the look and feel project
With the importer it's more like leveraging java functionality : in my case I've just implemented a call to a webservice on an application server. There is nothing visual here and it's just called via a straight bit of PL/SQL that call my java classes ( however, in that case I could also use UTL_HTTP directly to make the call and thus not bother with java importer - but the database wouldn't allow UTL_HTTP calls :( )
For both of these you'd need to tell forms where to find the JAR file in it's java environment - but you won't have that in c/s
Another way is to load up java code into the database and process it within the database and hide it completely from Forms. I've done this sort of thing loading Apache-FOP into Oracle and creating PDF files in the database (as BLOBS) from XML/XSL also in the database as XMLTYPES.
At least that's my view on how it fits together ... maybe others know more :)
Steve

Oracle 9i Forms in Client/Server Mode (Updates in Technical FAQ)

Hi All,
I'm doing an investigation for porting to Oracle Forms 9i and I've found the answers in Oracle 9i Forms Technical FAQ of February 2003. But since it's been more than three and a half years, I would like to know if the following information in the FAQ still holds?
Upgrading to 9i
What versions of Forms can I upgrade to Oracle9i Forms?
Only Forms 6.0 and Forms 6i are supported for direct upgrade to Oracle9i Forms. Older versions of Forms should be upgraded to Forms 6i first.
Can I run Client Server or Character Mode applications in Oracle9i Forms?
No. Oracle9i Forms only supports Web deployment. Applications that need to be run in Client Server or Character Mode should remain in Forms 6i. Forms 6i will be supported until December 31st, 2004, or December 31st, 2007 with Extended Support for customers who wish to maintain such applications.
What changes will I have to make to my application before upgrading?
Many Client Server and Character Mode features have been removed from the Forms product for 9i. The removed features mainly relate to features that where only maintained in Forms 6i for the purpose of backwards compatibility. A detailed list of all of the obsolete features can be found on OTN (/products/forms/pdf/featuresobsolescence.pdf)
Is there an easy way to find out if my modules use obsolete features?
Yes. Oracle supply a separate utility with the Oracle9i Forms distribution "f90plsqlconv". This is a utility which will scan your files for obsolete usages and correct them where applicable. It will also alert you to any changes you may have to make manually.

As far as I know it still holds: Forms9i isn't changed since then.
What I don't see in the FAQs is if you move form client/server to the web that you must be aware that the forms are running on the application server instead of the client PC. So calls to TEXT_IO and HOST etc are also executed on the appserver. You should review those calls and decide were you want to have them executed...(use webutil if you want to keep the execution on the client)
HTH

Calling Web Form from Client-Server Form

Hi. I have an existing Client-Server Form (6i) still in production that needs to call a Web Form and pass it a parameter. Obviously I can't use Call Form or New Form from the client-server version, but can I somehow issue a command line (including a parameter) that opens the Web Form? Any suggestions for accomplishing this?
I can create a command line like this, but have no idea how to pass a parameter to my Web Form. The Web Form named participants which has a Parameter defined named 'p_participant'.
*"C:\Program Files\Internet Explorer\iexplore.exe" http://9.35.32.206:7777/forms/frmservlet?form=participants*
I can also create a command line to open a web form like this to:
*"C:\Program Files\Internet Explorer\iexplore.exe" http://9.35.32.205:7777/forms/html/sas2.htm*
Where the sas2.htm looks like this:
*<html>*
*<body onload="document.menulaunch.submit();">*
Launching File Generation...
If the application does not load in 30 seconds then click the button below:
*<form name=menulaunch action=http://9.35.32.205:7777/forms/frmservlet?config=FileGeneration method=post>*
*<script>*
var wshshell=new ActiveXObject("wscript.shell");
var username=wshshell.ExpandEnvironmentStrings("%orauser%");
var pw=wshshell.ExpandEnvironmentStrings("%orapass%");
document.write("<input type=hidden name=userid value="+username+"/"+pw+"@sparc20*>")*
*</script>*
*<input type=submit value=Launch>*
*</form>*
*</body>*
*</html>*
Any help would be greatly appreciated.
Edited by: Buechler on Apr 8, 2009 8:58 AM

Simply add to your URL as follows:
http://9.35.32.206:7777/forms/frmservlet?form=participants&otherparams=p_participant=<SOME VALUE>I assume you plan to use HOST to make this call. I would recommend something like this:
HOST ('cmd /c start iexplore.exe "http://9.35.32.206:7777/forms/frmservlet?form=participants&otherparams=p_participant=<SOME VALUE>"');

JavaFX as a SaaS/ How good is it for Client-Server work?

I was under the impression that FX could be used to produce a Client-Server application as well as SaaS.
a member of another forum said "I'm sure you meant to say "Desktop". JavaFX will not be making inroads on the web as a client-side technology."
To which I said
There have been examples of FX used with EE
http://www.oracle.com/technetwork/java/javafx/samples/index.html
http://docs.oracle.com/javafx/2/overview/jfxpub-overview.htm
Sales Dashboard (DataApp)
DataApp is a client-server application for a fictional global automobile company called Henley Car Sales. Automobile sales are simulated on an EJB server using JavaDB, and the data is available via Derby and a RESTful web service. The client demonstrates a variety of data presentations by using a mix of FXML and JavaFX.
I thought originally that JavaFX was "Desktop" only also, until I found this example. I couldn't get it to run due to some weird Database line read issue that others also had. I'm not sure if this is now due to FX's integration, or if this was something new, but I believe I have seen another FX client-server app as well.
I'm not that familiar with the client-server side of Java yet, so if you have other Information I would like to know, because I am looking to design a Client-Server app with FX, and I don't see why it would be an issue, unless there are huge limitations."
He ended up saying "Those are still desktop apps. Sure, they are client-server in that they connect to a remote database. But they are still traditional fat-client apps rather than web-based thin-client SAAS web applications which, these days, most people will think of when you say "client".
My point is to be more precise when you use the word "client".
But if your point is just that JavaFX is taking over from Swing for the limited areas in which Swing is used, I have no insight into that area."
Now I don't really like attitudes when I get my question answered, but the high and mighty needs to stop. It clearly says Client-Server so I don't know why it's being denounced by this dude who thinks he obviously knows better.
Anyways he talks about it only being able to connect to a DB, to which it says it uses EE tech such as EBJ, Restful, and Derby, so that's more than just DB right(I don't know since I havent' learned that yet)?
It seems as if he's saying that only EE code can go up on a server? Or can SE code go up there as well?
I'm looking to design a SaaS software with FX, so if this isnt' possible I would like to know possible other options(or just having all of the gui work on the client, and the rest on the backend)???
Thanks!
~KZ
Edited by: KonradZuse on Apr 30, 2013 11:26 AM

This response is not a tutorial, I hope it gives you some verbiage to use in further searches.
SaaS to me means that the service is running on the server. If you have the server and permission to run java apps there then you can use Java FX by having the server shuttle requests to the Java FX app. But this is probably not the intent of Saas (it would be more appropriate to use a java implemented web service).
If you are using Netbeans then it is very easy to create demo projects; use "File/New Project" to run them on your local computer.
Example File/New Project/Java Web/Web Application will give you a hello world web site very quickly. This will 1) start either tomcat or glassfish as the server. 2) launch an html page with "hello world". then you can use java script to talk with the server via ajax. Using this approach you are going to need to study JSP or J2EE stuff.
After this is running you could start one of the Java Fx examples in Netbeans: File / New Project / Samples / WebViewBrowser. This will start a javaFX app that acts like a browser and runs on the client.
So, start the "hello world" app in netbeans by right clicking it in the project pain and selecting "debug". Then start the webviewBrowser app the same way to load that web page that has "hello world" in it as all browsers do. In the WebviewBrowser (which is java fx) you can get at the javascript in the web page and do all kinds of stuff. You'll need to search for webviewBrowser examples.
The above all assumes a Netbeans solution. But, as you probably know, there are no rules. The server can be in C++ and the client in C (or any other language). The server and client usally communicate via http or tcp. So you could have a server written in java (maybe J2ee or you can rewrite a http server from scratch which isn't that hard - search for "HttpServletRequest and HttpSession" ) and the client can be in Java FX (where the Java FX talks directly with the server via http (no javascript or web page in the middle) again there are probably hundreds of libraries to talk to a http server).
I use HttpServletRequest and HttpSession on the server side with MySQL and xml. On the client I use javaScript but I am moving to a strictly Java FX solution. This will give me close to 100% java on both sides and for my purposes this will work. (I may need a little html in the middle for drag and drop installation.) I am hoping that work continues with porting Java FX to most devices: Android, IOS, WinPhone. It is already on Linux, Windows Desktops and Mac.
Edited by: KevinPas on May 1, 2013 9:50 AM
Edited by: KevinPas on May 1, 2013 9:56 AM

Forms 6i client/server questions

Hi, I have three questions:
1) Is Patch 17 for Forms6i cumulative? (we have patched up to patch 13)
2) After applying patch 17 do we need to recompile all of our forms?
3) We are connecting from 6i client/server forms to a 10.1.4 database, is there a recommended Oracle client? (we are very behind and still running a very old version and I'm trying to get information to move forward)
Thanks.

Patch 17 is designed for the 10g database. There is no hint, that a 9i-db is better than a 10g. Use 10g.
I always recompile all (!) libs, menues and forms after installing a new patch. It's better to do that once, than to search for failures, that result from patching.
try it
Gerd

Developer 9i Form in Client/Server

Dear Friends
Can we run our application of Developer 9i in Client/Server mode. (without using Application Server)
Amir Sajjad

The last client/server version is Forms6i.

Itunes does not recognise ipad 2 with win7 64 bit but the computer recognises the ipad 2 as a camera. Works OK with win7 32 bit.

I have tried to sync both ipod and ipad2 (new) with itunes running on win 7 64 bit. I have all latest versions installed on all machines.
The ipod and ipad are just not recognised in itunes.
I have an old win7 32 bit system on the same machine and everything works perfectly.
Any ideas welcome.

http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/.
This was the answer to all my problems, once i updated the drivers all good! My iPad kept insisting I didnt have the 64bit itunes (which i did) and when I checked the files I was supposed to have as per the link instructions, I had none of them. Disappointed I had to turn to some random files off a blog rather than having apple actually provide useful help. As long as they are making money though :Z

Forms 6i Client Server works in Win7 64 bits but Runtime (Ctrl-R) not

Similar Messages

Maybe you are looking for