Forms 6i, copy file to from A folder to B folder in client side

I am using forms 6i, I want to write a procedure that will copy an file located in A Folder to B folder in client work-station....how to do that....
Thanks !

Hi,
If you are using C/S, then you can use the HOST command to do that. If you are using WebForms, then you need to do that using some Java Bean. Also, you can search this forum for d2kwutil.pll, which has similar functionality of HOST command but in the client machine.
HTH.
Regards,
Arun

Similar Messages

  • Copying file names from a folder into excel?

    I have a folder with over 200 files.
    I would like to copy the information/file names of these files into an excel spread sheet.
    I don't need to get all other extensions and information just the file names.
    Is there a way to do this?

    Open the folder,
    Select All,
    Copy,
    Open Excel and select a cell
    Paste.

  • How do I copy a photo from one folder to another one in Aperture

    I'm old and feeble      I cannot figure out how to copy a photo from one folder to another folder   and my 13 year old grandson can't figure it out either, so I feel better about it
    thanks
    canonmick

    Um ... that doesn't seem ... like a useful workflow.  When you say "folder" do you mean a Folder in Aperture (shown on the Library tab of the Inspector) or a folder in Finder?  They are not at all the same thing.
    Aperture is an image manager, with the requisite file management built-in.  Finder is a file manager.
    If you provide a full description of what are doing, and what you are trying to do, someone here can set your straight.
    Fwiw, IME, the learning curve if very long and uphill, but gentle.  What's unusual (esp. for Apple products) is that the landmass of Aperture is separated from the rest of your computer knowledge by a moat.  What I mean is, the first leap is the hardest.  After that, you'll be on firm ground, ready to explore.

  • File Adapter - how to get the file count from a folder

    Hi All,
    I have a requirement that have to poll a directory when the file count is reached to number N (ex:number of files avilable in folder is 5) otherwise it should wait and not pick any of the files. Is it possible to get the file count from a folder using file adapter ?? otherwise please suggest me an approach to achieve this requirement.
    Thanks,
    JJ

    Hi Sarath,
    Thank you for your reply.
    Go with the list files operation of file adapter it will gives you the number of files in the specified folder as you given. . - this step is already done.
    When the number of files reaches your count startup your webservice that which can polls the files. . . - how can i acheive this?? Have to poll the directory and process the number files - please let me know, what could be added to the webservice which is being invoked after cheking file count from parent process.
    The reason for the above question is - we cannot use ReadFile operation in second webservice because it will be automatically triggered when the file is avilable. Also SyncRead operation supports reading one file in b/w bpel process. Kindly explain me the implementation steps.
    Thanks,
    JJ

  • Cannot copy files to/from external drive

    Hi All,
      Bit of a cry for help.  I run an iMac 3.06 Ghz Intel Core 2 Duo with 10.7.3 and I'm having some serious problems with an external drive.  Some history first - I have a large iTunes library (~3Tb) of everytype of media which I stored on an external NAS (iomega StorCenter) with no problems - then this NAS started to report a drive error with imminent failure.  I purchased a new DAS (Western Digital) drive and moved all my content from the NAS to the DAS and everything was ok.  Then I started to get errors through iTunes about cannot find the file and cannot read the files - and then I couldn't access anything on the drive.  At this time I thought this was a different problem because I was running preview Mountain Lion, or there was an actual fault with the disk.  After investigation, and coughing out for Data Rescue 3 I found that somehow the entire file structure had been corrupted and all my files had been orphaned.  So at this point I had one dying NAS drive and one DAS which wasn't usable and no space to recover any files to.
      So - next step was to purchase another external drive (and returned the WD) - this time I went for a G-Raid 4Tb (non-thunderbolt) drive and I've been in the process of recovering files from backups and iTunes.  I've had no problems until today when yet again I've started getting errors and now I have problems copying files to/from this G-Raid drive.
      Technical details - OS-X 10.7.3 - G-Raid 4Tb formatted as Mac OS Extended (Journaled) - currently showing 1,163 folders and 15,452 files.
      Symptoms - using finder drag and drop copy a file from the g-Raid to desktop results in 'The operation can't be completed because the item 'xxx' is in use. - 'The operation can't be completed because one or more required items can't be found (error code -43).' and the copy fails.
      Using the cp command I get a 'Resource Busy' error.
      However, this is not for all files - I've managed to copy all my books back to the desktop ok, when a couple came up with the above error I tried again and it copied successfully.
      I have run Disk Utility - here are the details :-
    - 4TB G-Tech - Verify
    Verifying partition map for “G-TECH”
    Checking prerequisites
    Checking the partition list
    Checking for an EFI system partition
    Checking the EFI system partition’s size
    Checking the EFI system partition’s file system
    Checking all HFS data partition loader spaces
    Checking Core Storage Physical Volume partitions
    The partition map appears to be OK
      Volume (Media) - Verify
    Verifying volume “Media”
    Checking file systemPerforming live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Unused node is not erased (node = 24190)
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Unused node is not erased (node = 24784)
    Checking volume bitmap.
    Volume bitmap needs minor repair for under-allocation
    Checking volume information.
    The volume Media was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Click Repair Disk.
    Verify and Repair volume “Media”
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
    Verify and Repair volume “Media”
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
    Verify and Repair volume “Media”
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Couldn’t unmount disk.
    Verify and Repair volume “Media”
    Checking file systemChecking Journaled HFS Plus volume.
    Checking extents overflow file.
    Unused node is not erased (node = 94)
    Checking catalog file.
    Invalid sibling link
    Rebuilding catalog B-tree.
    The volume Media could not be repaired.
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
      and it's just got worse - in getting the info for this post I no longer have access to the drive.
      This is the second time this has now happened on two different directly connected drives (USB and Firewire) - which means the problem is elswhere.  I've a stack of errors in the system.log file
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** /dev/disk1s1
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 1 - Preparing FAT
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 2 - Checking Directories
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 3 - Checking for Orphan Clusters
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: 0 files, 201632 KiB free (403265 clusters)
    May 10 17:52:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
    May 10 17:52:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
    May 10 17:52:39 Neil-Cattons-iMac iTunes[747]: _AMDDeviceAttachedCallbackv3 (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' attached.
    May 10 17:52:40 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:52:46: --- last message repeated 1 time ---
    May 10 17:52:46 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendDetachNotification (thread 0x7fff799da960): sending detach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _BrowseReplyReceivedCallback got bonjour removal.
    May 10 17:52:46 Neil-Cattons-iMac iTunes[747]: _AMDDeviceDetached (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' detached.
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
    May 10 17:53:49 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:01: --- last message repeated 1 time ---
    May 10 17:54:01 Neil-Cattons-iMac login[1000]: DEAD_PROCESS: 1000 ttys000
    May 10 17:54:05 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:35: --- last message repeated 3 times ---
    May 10 17:54:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
    May 10 17:54:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
    May 10 17:54:46 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:50: --- last message repeated 3 times ---
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
    May 10 17:54:51 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:55: --- last message repeated 5 times ---
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 238d0016, actual seed is 7fdcc233
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2f760017, actual seed is 1befd79f
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 255a0018, actual seed is 41a7c4c9
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 292e0019, actual seed is 6b68079a
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2263001a, actual seed is 4e6afb66
    May 10 17:55:01 Neil-Cattons-iMac kernel[0]:
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** /dev/disk1s1
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 1 - Preparing FAT
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 2 - Checking Directories
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: ** Phase 3 - Checking for Orphan Clusters
    May 10 17:52:16 Neil-Cattons-iMac com.apple.diskmanagementd[1057]: 0 files, 201632 KiB free (403265 clusters)
    May 10 17:52:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
    May 10 17:52:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
    May 10 17:52:39 Neil-Cattons-iMac iTunes[747]: _AMDDeviceAttachedCallbackv3 (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' attached.
    May 10 17:52:40 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:52:46: --- last message repeated 1 time ---
    May 10 17:52:46 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendDetachNotification (thread 0x7fff799da960): sending detach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _BrowseReplyReceivedCallback got bonjour removal.
    May 10 17:52:46 Neil-Cattons-iMac iTunes[747]: _AMDDeviceDetached (thread 0x1180fc000): Device 'AMDevice 0x7ffe6d2d04a0 {UDID = f398e56f8aa95276585e0c5f74544bc24dda99bd, device ID = 58, FullServiceName = fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.}' detached.
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
    May 10 17:53:40 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
    May 10 17:53:49 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:01: --- last message repeated 1 time ---
    May 10 17:54:01 Neil-Cattons-iMac login[1000]: DEAD_PROCESS: 1000 ttys000
    May 10 17:54:05 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:35: --- last message repeated 3 times ---
    May 10 17:54:38 Neil-Cattons-iMac com.apple.usbmuxd[29]: _SendAttachNotification (thread 0x7fff799da960): sending attach for device fc:25:3f:7e:2a:19@fe80::fe25:3fff:fe7e:2a19._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
    May 10 17:54:38 Neil-Cattons-iMac usbmuxd[29]: _AMDeviceConnectByAddressAndPort (thread 0x100781000): IPv4
    May 10 17:54:46 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:50: --- last message repeated 3 times ---
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in _copyFile:error (2) opening 0.directoryStoreFile
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in recoverIndex:Unrecoverable error: could not recover path index (0.)
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (Normal) DiskStore: Rebuilding index for /Volumes/Media
    May 10 17:54:50 Neil-Cattons-iMac mds[39]: (/Volumes/Media/.Spotlight-V100/Store-V2/5E86681D-E756-465C-925C-A631D78C3A46)( Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed
    May 10 17:54:51 Neil-Cattons-iMac fseventsd[15]: disk logger: failed to open output file /Volumes/Media/.fseventsd/fc007480d049964a (Invalid argument). mount point /Volumes/Media/.fseventsd
    May 10 17:54:55: --- last message repeated 5 times ---
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 238d0016, actual seed is 7fdcc233
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2f760017, actual seed is 1befd79f
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 255a0018, actual seed is 41a7c4c9
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 292e0019, actual seed is 6b68079a
    May 10 17:54:55 Neil-Cattons-iMac Finder[147]: ISGetIconFamilyFromStorage: seed mismatch for 2263001a, actual seed is 4e6afb66
    May 10 17:55:01 Neil-Cattons-iMac kernel[0]:
      I'm now out of ideas and when I got in touch with G-Tech support I got "Unfortunately the drive seems to have been corrupted. You can try to retrieve the data using third party data recovery software such as Data Rescue 3. You can find the software at a discounted rate at the following page:http://www.thedatarescuecenter.com/gtech-data-recovery-software.html  If you have any further questions, please feel free to ask."
      any help/advice/pointers very much appreciated as I really don't want to have to start recovering again :-(
    Thanks all.

    Hi Ncat,
    I might have had similar problems with yours. Finder stuck at 'Not Responding' while I boot my Macbook Pro with external HDD plugged in, my macbook heats up considerably maybe because it keeps trying to access the external disk. And Finder can only proceed after I unplugged my external hard disk.
    So what I did was:
    I rebooted my macbook into recovery mode (by holding cmd+R before / during the booting chime
    I used the Disk Utility from there (instead of from normal booting)
    Then I proceed to with 'Repair Permissions' and 'Repair Disk' for each and every partition of the external harddisk, and also my internal hard disk.
    Rebooted after everything's done, and now it seems to work.
    I hope that it will work for you

  • Is consolidating library necessary if you have the "copy files to itunes media folder" box checked?

    Like the title, Since I've had iTunes I've always had the box checked for "copy files to itunes media folder"... if I want to backup my itunes folder now, do I still have to consolidate the library? I just copied it over without consolidating and it took like half an hour, so I'm just wondering if I should do it again after consolidating? I'm assuming it's fine. It seems to have transfered all 70G of my music.

    Sharing,
    What Consolidate does is look thru your iTunes library, and for any track that is not already in your iTunes Media Folder, it puts a copy there.
    If you have always had Copy checked, and have never moved your iTunes Media Folder, and have not manually put any files elsewhere, then you probably already have all your files in the iTunes Media Folder, and would not need to run Consolidate.  However, it would not hurt.

  • Reducer error occurs - copy file fails from D to C while running recovery cd in windows 8,64 bit.

    Sir I bought a new hp envy 15 j049tx on 25 October 2013 and it stopped working on 29 october 2013.Whrn I opened the laptop a blue screen appears written that "Your pc ran into an error and we are restarting for you. The laptop restarts and the same process keeps going on.
    I told the Hp customer support, they asked me to run hard drive and memory tests. Both hard drive and memory test came out PASSED(both quick and extensive tests). Then they ordered hp recovery discs. When i received it while running the 1st cd an error came with label REDUCER-copy file failed from D... to C.... They then sent a technician who said that the recovery cd are faulty. Its Been a month and the problem still persists. They have ordered a new set of recovery cd. I hope to receive them by 22.I am very much worried. Its windows 8,64 bits os. Please reply. Is it recovery cd problem? Please tell what to do?

    anyone found the fix for this?

  • Is there a way I can set iTunes to add files automatically from a folder in my Windows PC?

    Is there a way I can set iTunes to add files automatically from a folder in my Windows PC and ensure that it is synced automatically? For example, if I add or modify a file in that folder it should be added to iTunes automatically. At the same time the original files in the folder should not be re-organized. That is can I just point to a music folder in my hard drive and sit back for iTunes to do the rest?

    Rishitani wrote:
    ..is there a way i can get it to start apart from restoring...
    Nope.
    Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Copy file ( .fmb ) from folder to folder

    What is the command to use from Oracle Forms or from the database to copy a file from one folder to another?
    An example for link will be greatly appreciated

    Hi,
    Remember, the HOST call runs the OS command. So, you may need to use appropriate OS commands in the call. In windows, you may use "copy" but, if your App Server is of Unix flavor, you may want to use "cp".
    Also, if you are planning to do it in the client machine, you need to fist identify the client OS and execute the appropriate command depending on it.
    -Arun

  • How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

    Hi,
    I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
    I am almost lost to find the operating tools.
    1. How can I copy files from hard drive to computer and vis-a-versa?
    2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
    3. No right click works on track pad?
    4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
    5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
    I will very much appreciate if you could email me the with the solution/answers please.
    Regards,
    Khagendra Limbu

    1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
    Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
    Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
    Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
    Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
    2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
    3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

  • Copying Files To/From External Drive: Error -36

    I recently purchased a WD 700 GB drive that I'm using as a network drive using AirportExtreme. Today, while trying to copy files from either of my internal drives to the WD drive, I get error -36 messages. If I'm copying a folder of files and click on the option "skip" after receiving an error message for a particular file then the entire copy transaction aborts. I have taken the following steps:
    1) Disconnected WD from netywork and connected it directly to my G5.
    2) Ran Disk Utilities and got 1 error on 1 of the 3 partitions which was repaired.
    3) Re-ran Disk Utilities and got no error.
    Tried moving folders of files and groups of files from WD to G5 and received same error -36 message.
    Tried moving folders of files and groups of files from G5 to WD and received same error -36 message. Cannot move even a single file - of ANY size - w/o getting error -36 message.
    4) Checked permissions and "ignore ownership" settings on volumes concerned then logged in under root.
    Same problem continues. Tried moving files between my internal drives - no problem. Now here's the thing: the only files I have moved to the WD drive thus far are my music files. The iTunes Library on my G5 is pointed at an iTunes folder with these files inside. Last 2 weeks or so there's been no problem.
    I NEED TO GET THESE MUSIC FILES OFF or COPIED or BURNED to another disk. In that vein I tried:
    5) Unsuccessfully creating an image file of the files on the WD but always ended up with a much too small and empty .dmg file.
    6) Burning files to DVD - same error -36 messages.
    7) Repaired permissions on my G5 - just 'cause. No help.
    8) Re-ran Disk Utilities on WD: repairs not needed.
    9) Re-booted; error -36 messages continue to pop up.
    I'm at a loss as to what to do and am especially peeved because I bought the WD at the suggestion of a clerk at the Apple Store even after I pointed out to him that the WD was getting very mixed reviews on Apple's site. I'm not angry with the clerk but at myself for purchasing the WD even with my misgivings.
    How can I copy to another disk the ONLY copy of my music files from the WD drive so I can either reformat or return it?
    Dual 2 GHz G5, 17" MacBook Pro, MacMini, Apple iPhone   Mac OS X (10.4.10)   2 Apple 20" Cinema Display, Proview 17" display, External Acomdata Disk Drive

    A couple of ideas:
    1. Do you have an iSight camera or an iPod connected to another Firewire port? If so, unplug them so that the only Firewire device is the drive.
    2. Unplug everything except the keyboard and mouse and download and reapply the 10.4.10 COMBO update. Make sure no other program is running when you apply the update, and do nothing whatsoever until the update finishes.
    3. Have you tried plugging the drive into another computer to see if it works? If so, copy files off on the other computer and burn them from there.
    4. Does your iTunes work and access the files? Have you tried creating CDs from iTunes?
    If all else fails and you have a spare drive slot in the G5 that will take the type of drive in the enclosure, you could always try removing it from the enclosure and putting it into the G5 and see if it works there. The problem could be the innards of the drive enclosure rather than the drive itself.
    Francine
    Francine
    Schwieder

  • How to get the file name from downloads folder with the applescript??

    Hi All..
    I am downloading an application to downloads folder, I need to install the same application after downloading programatically.
    So how do I get the filename in runtime while downloading or after downloading from downloads folder with Applescript or Java?
    Also my download URL link doesnot contain full name of the download file.
    Pls suggest.

    Hi,
    The best method is to use curl.
    Other methods are not reliable, but can work, it depends on several factors (what the script does, what the user does).
    Here is an example with the curl command:
    set tUrl to "http://sourceforge.net/projects/vlc/files/2.0.4/macosx/vlc-2.0.4.dmg/download?ac cel_key=60%3A1350656196%3Ahttp%253A//www.videolan.org/vlc/download-macosx.html%3 A7233e4e9%245818d66f39b0576e1e9c4a0f3b46b1991180bfdd&click_id=976a88ee-19f7-11e2 -9a21-0200ac1d1d8e&source=accel"
    set dFolder to path to downloads folder
    tell application "Finder" to set newFolder to (make new folder at dFolder) as string
    set f to quoted form of POSIX path of newFolder
    do shell script "cd " & f & " && curl -L " & tUrl & " -o 'vlc.dmg'" -- download  to file "vlc.dmg"
    set downloadedFile to newFolder & "vlc.dmg" --<-- HFS path
    --do something with the downloadedFile

  • Having Problems Copying Files to Burn Disc Folder

    Ok here's the deal. With Tiger I was able to copy files from volume or desktop and paste them in burn disc folder then burn disc from finder. Now whenever I paste them, they paste as alias' (shortcuts) not as the full file. What's going on?
    (Keep in mind I do know the dragging creates shortcuts, I'm not dragging I'm copying and pasting, and it always worked great until I upgraded.)
    This is extremely annoying. I hate burning through programs and I'd really rather not if someone can explain to me how to fix this problem.

    From Mac Help:
    Creating a burn folder
    You can create a burn folder to collect files you want to burn onto a CD or DVD. Burn folders are especially handy for burning several copies of a folder, or for regularly backing up a set of files by burning them to discs.
    To create and use a burn folder:
    Click the desktop (the background area of your screen) if you want to keep the burn folder on the desktop; otherwise, open the window where you want to keep the burn folder.
    Choose File > New Burn Folder, and type a name for the folder.
    Drag to the burn folder the items you want to burn to a disc.
    The Finder places aliases to the items in the burn folder; the originals are not moved.
    When you’re ready to burn the folder’s contents to a disc, double-click the burn folder and click Burn.
    Insert a blank disc into your computer’s optical drive, or into an optical drive connected to your computer, and follow the instructions.
    The original files that the aliases point to are burned to the disc. In addition, if any folder in the burn folder contains aliases, the original files for those aliases are burned to the disc as well.
    If the Finder cannot find the original file for an alias, it asks whether to cancel burning or to continue without that item. If you cancel, the disc remains empty.
    If a burn folder is in the sidebar of a Finder window, you can quickly burn its contents to a disc by clicking the burn icon beside it.
    ~~~~~~~~
    ~~~~~~~~
    There is a gear on the bottom of the burn folder in Finder, that appears when a blank DVD is loaded, which when clicked will tell you how much room has been used on the disk or the remaining space, can't remember which at this stage.
    I burnt 5 DVDs plus CDs via aliases in burn folders to move all my records from my old iBook to my MacBook Pro, both running Leopard. Believe me it does work. ~ not one coaster either.
    This is a user to user forum, thanks and a smile go a long way.
    By the way Tiger used alias to Burn discs too:
    http://support.apple.com/kb/TA23505?viewlocale=en_US
    Message was edited by: Ashka

  • Cannot copy files direct from PC to DROID-Mini

    Have direct connection to PC (Win7x64 OS) via USB data/charge cable. I am trying to copy MP3 files to the Music folder on phone but I get "Device might not be able to play this type of file", and then "Cannot copy file." I assume this phone can play MP3 files. I was able to create a subfolder in "Music", but cannot write to it or the main "Music" folder. The main reason I upgraded to this phone was bluetooth connectivity to my Sena motorcycle bluetooth wireless headset/intercom/phone system - mostly to play music. From what I can tell from the less than detailed manual, I should be able to copy files to the phone storage from a Win7 PC. Any help appreciated.

    Easiest way I find to transfer photos/music is to use mass storage mode.
    Plug in the device, it asked for mass storage mode permission..
    Then it pretty much works for ur memory card in the device as an external harddrive/usb.
    Get access direct to move things freely between memory card and pc.
    Go to options> Media Card> Change Mass storage mode support to  ON and Auto enable mass storage mode to prompt..
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • Not able to copying files/folders from one Document Library to another Document Library using Open with Browser functionality

    Hi All, 
    We have SharePoint Production server 2013 where users are complaining that they are not able to copy or move files from one document library to another document library using “Open with Explorer” functionality.
    We tried to activate publishing features on production server but it did not work. We users reported following errors:  
    Copying files from one document library to another document library:
    Tried to map the document libraries and still not get the error to copy files: 
    In our UAT environment we are able to copy and move folders from using “Open with Explorer” though.
    We have tried to simulate in the UAT environment but could not reproduce the production environment.  
    Any pointers about this issue would be highly appertained.
    Thanks in advance
    Regards,
    Aroh  
    Aroh Shukla

    Hi John and all,
    One the newly created web applications that we created few days back and navigated to document library, clicked on “Open with Explorer”, we get this error.
    We're having a problem opening this location in file explorer. Add this website to your trusted and try again.
    We added to the trusted site in Internet Explorer for this web application, cleared the cache and open the site with same document library but still get the same above error.
    However, another existing web application (In same the Farm) that we are troubleshooting at the moment, we are able click on “Open with Explorer”,  login in credentials opens and we entered the details we are able to open the document
    library and tried to follow these steps:
    From Windows Explorer (using with Open with Explorer), tried to copy or move a files to
    source document library.
    From Windows Explorer moved this file to another destination document library and we got this error.
    What we have to achieve is users should be able to copy files and folders using
    Open with Explorer functionality. We don’t know why Open with Explorer
    functionality not work working for our environment.  
    Are we doing something wrong? 
    We have referred to following websites.
    we hope concepts of copying / Moving files are similar as SharePoint 2010. Our production environment is SharePoint 2013.   
    http://www.mcstech.net/blog/index.cfm/2012/1/4/SharePoint-2010-Moving-Documents-Between-Libraries https://andreakalli.wordpress.com/2014/01/28/moving-or-copying-files-and-folders-in-sharepoint/
    Please advise us. Thank you.
    Regards,
    Aroh
    Aroh Shukla

Maybe you are looking for