Forms 6i on Windows 7 (32 Bit ): FRM-41211 and DBMS 1403

Hi All,,
I want to find a solution for Forms 6i 6.0.8.25.2 on Windows 7 (32 Bit). We get the follwoing errors, if we want to use Reports-Server:
FRM-41211 ...
DBMS Errorcode: 1403 and Errtext: ORA-01403
By the way, we can use Reports-Server on Windows 7 (64 Bit) after change NN60.dll und NNB60.dll with older version of DLLs.
Is there any experince regarding this matter?
Thanks in advance,
Moh

Although it's not certified I am running a forms 6i application on win7 64bit. So far nothing too hard (in fact as I installed developer suite it was easier to install then the 10g version...); the only thing I did was to apply the latest patchset for forms 6i (6.0.8.27.0); both forms and reports are running fine (I am using reports almost never though). This doesn't mean this should always work, but at least you have a little chance to get it working. As for your ORA-1403: did you try to debug your report?
http://ora-1403.ora-code.com/
would indicate a problem in your code to me, not a OS problem...
You should look into upgrading though; here's a starter:
http://www.oracle.com/technetwork/developer-tools/forms/index-095046.html
cheers

Similar Messages

  • ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

    iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
    Downloaded latest version onto desktop. Will not complete install.

    Many thanks.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • HT1846 The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

    The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

    I would buy nothing less than Windows 7 64-bit Pro.
    32-bit only addresses 3.5 GB RAM ... 2012 Macminis can hold 16 GB.
    64-bit Home addresses 16 GB RAM.
    64-bit Pro addresses 192 GB RAM and han an XP mode.
    This is all about having a good version of Windows for future use.  Yu can buy "Syem Builder" version of 64-bit Pro for $140.

  • Hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??

    hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
    Please could someone help???
    And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
    Thanks alot! I really appreciate your help..

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Help Installing Forms 11G on Windows 7 64 Bit

    I am trying to install. I installed 64 bit Java JDK, Weblogic generic server, and finally Portal, Forms, Reports and Discoverer (11.1.1.2.0). When the Portal, Forms, Reports, and Discover install get to step 6 of 16, it reports: INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Note that the error seems to be a complaint against a JVM, not a JDK. Does anyone have a fix?
    Edited by: user1637605 on Dec 20, 2009 7:13 PM
    Edited by: user1637605 on Dec 21, 2009 3:45 AM

    hi
    Oracle Forms certified on Windows 7 and IE8
    I've seen this question come up a number of times recently so just to make clear. Oracle Forms 11.1.1.2 (which is the first patch set to 11g) is certified to run again Window7/IE8 browser clients.
    Full details of Forms client certification can be found here:
    Link
    sarah

  • Forms problem in Window 7 64 bit

    Dear Members
    I have installed "Forms [32 Bit] Version 10.1.2.0.2" on Windows 7 64bit. I have the Internet Explorer 9. Now when i run the forms it prompts for download jinit when i try to download it show the error dialog box as under
    Jinit.exe
    Cannot download this file.
    Details:
    HTTP/1.1 502 Proxy Error (Forefront TMG denied the specified Uniform
    Resource Locator (URL). )
    Now i have installed manually JInitiator 1.3.1.26 (32-bit) and also copy the jvm.dll file in the desire folder. When i run the form it shows blank page with broken link.
    Please help me to solve this problem.
    Thanks & Regards
    Edited by: SweetKUR on Aug 9, 2012 12:06 AM
    Edited by: SweetKUR on Aug 9, 2012 12:19 AM

    This is a common question in the Forum. A simple search of the forum and you would have found that Oracle Developers Suite 10g R2 (version 10.1.2.0.2) is not supported on Windows 7 64-bit. However, you would have also found a couple of threads where people have made this work.
    Now i have installed manually JInitiator 1.3.1.26 (32-bit) and also copy the jvm.dll file in the desire folder. Don't do this! This is a complete HACK of the OS and there is no guaruntee that this will work and more importantly this could screw-up your OS.
    By default, Forms 10g is configured to use the Oracle Jinitiator because this was the Java Runtime Oracle was using at the time. Now, however, Oracle has changed directions and has adopted the standard Java Runtime. Therefore, you must reconfigure Forms 10g to use the Java Runtime Plug-In (JPI) on Windows 7. With Windows XP you did not need to do this. Take a look at Forms: How to Configure Forms Builder to run forms locally for detailed steps on reconfiguring Forms 10g.
    @937097
    I had the same problem in my computer, and the guys from systems department solved the problem installing Windows XP SP3.thy triend to install Forms10 with Windows 7 64bits, but they said it can't be done. >
    I disagree with your "Systems Department". I have Forms 10g installed and running quite well on Windows 7 Professional 64-bit. There are a few pre-installation steps you must take to install Forms 10g, but it can be done. At the very least, your Systems Department staff could have installed Windows XP Mode for Windows 7. Take a look at:
    Windows XP Mode - Windows 7 Features
    Install and use Windows XP Mode in Windows 7
    Download Windows XP Mode
    I've tested Forms 10g with XP Mode and it works fine there as well, but I prefer not to deal with the overhead of the Virtual Machine.
    To properly install Forms 10g R2 on Windows 7 you must first have Windows 7 Professional or higher. Then follow these steps:
    1. Install Java Runtime 1.6.0_33 (32-bit).
    2. Change Windows Virtual Memory from System Managed to a specific amount (2048mb Initial size, 4096mb Max). The Oracle installer can't detect VM settings if they are system managed. You will need to restart your computer after making this change. Once you have completed the installation, you can change the settings back to system managed.
    3. Right-Click the setup.exe and select properties. Select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP (Service Pack 3)".
    4. Run the installer.
    Once complete, review the document I linked above for configuring Forms to run locally from the Forms Builder.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Windows Vista 64-bit - ITunes died and won't reinstall

    Last night my wife let her laptop battery run dry with itunes 10 open. We had just installed it a week or so ago, and had not updated from the online download version.
    Anyhow, afterward, when I tried to open iTunes, MS would pop up with a message that the program failed to open properly. The laptop is Windows Vista 64-bit with the 64-bit software.
    I uninstalled, restarted, reinstalled, restarted, and tried again. Seemed to install correctly, but still got the crash when attempting to open.
    Tried QuickTime, it also will no longer open. Uninstalled both, and no when I try to install iTunes, it goes through the gathering information process of the install, but then pops up with a window saying the installer encountered errors before iTunes could be configured.
    I downloaded Windows Install Utility v. 3, but it shows iTunes and QuickTime completely removed (at least no entries were in their to remove).
    I also redownloaded the iTunes .exe, with the same results. Even tried the 32-bit, heh, which obviously didn't work, but worth a shot I suppose.
    Any help at all would be greatly appreciated.
    I did a backup of the registry and went through and hard delete most of the iTunes entries, with no success, so I just restored the registry to the original since I wasnt 100% sure that I should be doing that.

    Below are the two most recent problem reports for each of the three programs. No other programs had any recent problem reports. One interesting thing, from the time stamps, there are no crash reports from the last few iTunes install attempts which were giving the message from above and the latest attempt where it just flickers then doesn't do anything else.
    IE:
    Problem Event Name: APPCRASH
    Application Name: iexplore.exe
    Application Version: 8.0.6001.18999
    Application Timestamp: 4ccf9787
    Fault Module Name: mshtml.dll
    Fault Module Version: 8.0.6001.18999
    Fault Module Timestamp: 4ccfaef1
    Exception Code: c0000005
    Exception Offset: 00000000003d4d5f
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: 7fa8
    Additional Information 2: ad011ba5f87a70fa4fcf99fe53ccc471
    Additional Information 3: 184a
    Additional Information 4: 5b6bac566010931808e4f5f3b58e54e6
    Files that help describe the problem (some files may no longer be available)
    Version.txt
    AppCompat.txt
    minidump.mdmp
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iexplore.exe
    Application Version: 8.0.6001.18999
    Application Timestamp: 4ccf9787
    Fault Module Name: mshtml.dll
    Fault Module Version: 8.0.6001.18999
    Fault Module Timestamp: 4ccfaef1
    Exception Code: c0000005
    Exception Offset: 00000000003d4d5f
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: 7fa8
    Additional Information 2: ad011ba5f87a70fa4fcf99fe53ccc471
    Additional Information 3: 184a
    Additional Information 4: 5b6bac566010931808e4f5f3b58e54e6
    iTunes:
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.1.0.56
    Application Timestamp: 4ce4a7b6
    Fault Module Name: QuickTimeCapture.qtx
    Fault Module Version: 7.68.75.0
    Fault Module Timestamp: 4c87d2a0
    Exception Code: c0000005
    Exception Offset: 0003c759
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.1.0.56
    Application Timestamp: 4ce4a7b6
    Fault Module Name: QuickTimeCapture.qtx
    Fault Module Version: 7.68.75.0
    Fault Module Timestamp: 4c87d2a0
    Exception Code: c0000005
    Exception Offset: 0003c759
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: fd00
    Additional Information 2: ea6f5fe8924aaa756324d57f87834160
    Additional Information 3: fd00
    Additional Information 4: ea6f5fe8924aaa756324d57f87834160
    Problem signature
    Problem Event Name: BEX
    Application Name: QuickTimePlayer.exe
    Application Version: 7.68.75.0
    Application Timestamp: 4c87ca48
    Fault Module Name: QuickTimePlayer.dll
    Fault Module Version: 7.68.75.0
    Fault Module Timestamp: 4c87ca3f
    Exception Offset: 00005b6d
    Exception Code: c0000409
    Exception Data: 00000000
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: ce18
    Additional Information 2: 51a1821df37b716a5bcc7d3a608fd9cc
    Additional Information 3: a5e1
    Additional Information 4: c197509b4c5823cbbe47ce2e6aea41fd
    Extra information about the problem
    Bucket ID: 1370383568

  • Windows 7 64-bits Crystal report and Azalea (barcode)

    Hello,
    We use Crystal Report XI and Azalea (barcode) to print barcode from our Windows application for many years.
    Now we want to use Windows 7 64-bits. The barcode printing desn't work. Azalea answers they don't have any 64 bits library.
    What is the Crystal Report solution for printing barcode with Windows 7 64-bits ?
    Best regards.

    If Azalea doesn't have a 64 bit library your only option is to stay 32 bit.
    Crystal Reports is a 32 bit application so 64 bit is not an issue. Everything must be in 32 bit version to work with CR. And the only versions of CR supported on Windows 7 is CR XI R2 with Service Pack 6 and CR 2008 with Service Pack 2. No other versions will be test nor supported on Windows 7, best effort only.
    Thank you
    Don

  • GT70 609us windows 7 64 bit (S bar and kb9x radio switch drivers)

    Forgive me if this is not in the proper forum but my troubles seem to possibly cross in to multiple categories.
    I recently purchased the GT70 609US "Dragon Edition"  but it unfortunately came pre-loaded with windows 8.  After much time and research and going through uefi hell I was able to load windows 7 64bit in bios legacy mode.  Everything is working great with the exception of a few small issues that are causing me extreme frustration despite lots of research on the issue.  There is a device that is unrecognized which shows as "ACPI\KBB9XRADIOBTN" which seems to be causing my device to blue screen.  My other problem is with the s-bar, which is possibly related to this device, as I am unable to turn on or off my webcam, or w-lan.  I have searched for drivers and tried multiple versions of the s-bar application but to no avail.  the recovery message is as follows
    Problem signature:
      Problem Event Name:   BlueScreen
      OS Version:   6.1.7600.2.0.0.256.4
      Locale ID:   1033
    Additional information about the problem:
      BCCode:   1000009f
      BCP1:   0000000000000004
      BCP2:   0000000000000258
      BCP3:   FFFFFA800CA9D040
      BCP4:   FFFFF80000B9C4D0
      OS Version:   6_1_7600
      Service Pack:   0_0
      Product:   256_1
    Files that help describe the problem:
      C:\Windows\Minidump\021313-8065-01.dmp
      C:\Users\Nate\AppData\Local\Temp\WER-9718-0.sysdata.xml
    Read our privacy statement online:
      go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    I am hoping that someone more knowledgeable on this subject can point me in the right direction.
    Thanks in advance for any suggestions and help.
    •   Intel® Core™ i7-3630QM Processor
    •   17.3" Full HD Anti-Reflective Display (16:9; 1920 x 1080)
    •   NVIDIA® GeForce® GTX 680M 4G GDDR5
    •   Exclusive TDE Technology (GPU Overclocking)
    •   Full-Color Programmable Backlit Keyboard by SteelSeries
    •   Killer™ DoubleShot Technology (Killer™ E2200 + Killer™ Wireless-N 1202)
    •   MSI Cooler Boost Technology
    •   World-Class Dynaudio Premium Speakers
    •   128GB + 128GB SSD Super RAID + 750GB Hard Drive (7200RPM)
    •   16GB DDR3 1600MHz System Memory
    •   Blu-ray Disc Burner
    •   USB 3.0 x 3; USB 2.0 x 2; HDMI Output
    •   Built-in 720p HD webcam
    •   Audio Boost Technology

    Hello
    I have a GT70-one looks the same as you have by the specs, it came with win 8 and I changed to win 7.  The radio driver is missing in my machine too, becaus its only for win 8. I had problem with the s-bar , what I did was to uninstall s-bar went to intel.com instaled new drivers and installed s-bar over again.  been working like a charm sinse then.
    Hope this can help you. 

  • Windows 7 64-bit black screen and blinking cursor for ages before boot

    Help!
    I'm having the black screen with blinking cursor whenever I try and boot up Windows 7 Ultimate 64-bit thru Bootcamp on my MacBook Pro. If i let it just sit there for maybe 2 or 3 minutes, it then goes to the Windows Boot Manager screen and allows me to click on Windows 7 and the it boots perfect. I've tried installing it twice, same thing. No problem booting OS X Snow Leo 10.6.3. Got the right NVidia drivers installed, makes no difference. Have Paragon NTFS installed so I can get thru to NTFS partition from OS X. I badly need Windows too and don't wanna slow it down by running it in Parallels or VMWare Fusion. A little help?
    Thanks a lot!

    Solved! Here's what worked for me, it's located at:
    http://discussions.apple.com/thread.jspa?messageID=11567814#11567814
    (scroll further down, Option 3, you'll see one or two others had success with it too)
    Message was edited by: rapture_elk

  • Windows 7 64-bit: Switchable graphics and Ricoh card reader problem

    Hi guys,
    Two problems with my laptop. I'm using a T400, previously installed with Windows Vista Business 32-bit.
    Switchable graphics worked well until I formatted and installed Windows 7 Pro 64-bit (I got the RTM through MSDNAA). Now, Windows can only detect either the discrete graphics or integrated graphics at one time. When the BIOS was set to switchable graphics and enabling the detection of switchable graphics on Windows, it could only detect the Intel integrated graphics. When I try to switch to High Performance graphics through the Lenovo power manager, the screen flashes once, and the ATi graphics card appears on the device manager with the code 10 error (cannot start device). Also, compared to this image, my power manager window that opens with left-click does not have battery stretch and switchable graphics options. I have to right-click to switch my graphics.
    After some tinkering, I managed to activate the graphics card through the BIOS by switching it to discrete graphics only and disabling switchable graphics detection by Windows. Now the device manager shows the ATi card only, the Intel integrated graphics is gone. I understand that it should show both display adapters in the device driver when the ATi card is active: http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g4
    The second problem is with the Ricoh card reader. I managed to install the drivers properly, but the device shows up with a code 12 error (This device cannot find enough free resources that it can use) in the device manager. That error appears on 6 items in the device manager:
    Ricoh Memory Stick controller
    Ricoh SD/MMC Host controller
    Ricoh xD-Picture card controller
    Ricoh 1394 OHCI Compliant host controller
    Ricoh R/RL/5C476(II) or Compatible CardBus controller
    SDA Standard Compliant SD host controller
    Additionally, 6 error messages appear during every boot up, which I think is related to these 6 devices:
    ERROR
    Resource Conflict - PCI in slot 07
    Bus:15, Device:00, Function: 00 (it ranges from function 00  to 05)
    AND disabling the device through device manager results in a BSOD.
    I've seen some people post about the Ricoh problem, but didn't have any resolution (at least for those who had the boot up error message too). The switchable graphics problem seems quite common too but in my case it seems like it is working fine EXCEPT for the fact that only one graphics adapter can appear on the device manager at one time and I can't do switching at all. Anyone know if I can somehow solve this? Sorry for the wall of text and two-problems-in-one. I put them together because I don't know if one problem is affecting the other as both problems appeared at around the same time.

    As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.

  • Aluminum MacBook 24.GHz and Windows 7 64-bit - NVidia Drivers and kbmgr.exe

    I ahve got this mostly working, except I cannot install any Nvidia drivers - windows 7 insists they are not compatible.
    I installed the laptopvideo2go 9400M 64-bit Nvidia drivers via modded inf, Windows identifies them as drivers which match my video card, but when I try to change to that driver, Windows says those drivers are not compatible with the OS.
    Anyone figure out a workaround?
    Also, kbmgr.exe does not work at all, no errors, nothing happens when I double-click on it.

    Yesterday, I set up rEFIt boot loader and tried to boot from the DVD. There were a list of errors. Probably the problem is my external DVD drive, but SL was installed using the very one. Continue my investigation ...
    Message was edited by: mirage.jee

  • Windows 8 64-bit, failed installations and RAID 1 resync on HP ENVY h8-1520z

    I recently purchased an HP Envy h8-1520z with a single SSD and 8 GB RAM running Windows 8 Pro 64-bit.  I installed 2 Western Digital 500 GB WDC WD5000AAKX-001CA0 HDDs on SATA ports 5 & 6 and configured them as RAID 1 in the BIOS.  I have started installing apps on the RAID 1 array (E since the SSD is only 256 GB.
    While installing software, some install fine, but often the installation hangs with no errors indicated and I have to kill the installer task through task manager.  I usually follow that with a system shutdown or restart and almost every time that results in a resync of the RAID array.  Sometimes the shutdown or restart is quick, and other times it takes several minutes with intermittent disk activity as indicated by the drive light.  I have sometimes given up after 10 minutes or so and powered down by holding down the power button.  I can understand a resync after the forced power down, but it seems that all it takes to cause a resync is a failed installation, and that seem to happen a lot, even with software that explicitly says it is Windows 8 compatible.  Sometimes the applications run fine even after an apparently failed installation and other times not so much.
    Has anybody else seen this behavior or have any suggestions?  I’d like to get this sorted out before I load any more software.

    Hi,
    Did you check each hard drive for straps? There should not be any straps installed on the hard drive. These drives do have strapping posts.
    Did you use the AMD RaidExpert to create the array volume?  Did you wait until the RAID migration was complete before using the array volume?
    Check the AMD RaidExpert for errors. It's possible that you have a bad hard drive(s).
    Many applications want to be installed on the C drive.  Your SSD is 256GB so you should have plenty of space for most applications and the application performance will be improved.  Use the RAID 1 array to keep and store your data. The mirroring process of RAID 1 will protect it in case one hard drive fails.
    You might want to consider removing all of the data etx.. from the array, use the AMD RAIDExpert to delete out the array volume.  I would then run for hard drive diagnostics.  If the hard drives are free from errors then use disk management to separately reformat each hard drive.  Now go back to the AMD RaidExpert and create your new array volume.
    Be sure to review the software and bios updates for your PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • HP Pavilion dv7 windows 7 64 bits, No sound and No record

    Hi,Yestarday I realized that my interntal Microphone did not work. I traid to install upgrades from support Assitance, but a problems ocurred, I do not know if it was a internet coneccion problem or an Antivirus Problem, but after that I had to  run Windows Recovery Program because the PC did startup. After that  I lost the sound. Some file were corrupted during installation... I traid to run HP recovery or re install Sound Drivers (sp55461.exe), but the problem remains... I have a HP Pavilion dv7Notebock with  Windows 7 Home Premium 64 bits.. I read a post telling this answer...1. Click Start, type: DEVMGMT.MSC in Search Field and Press Enter. It opens Device Maanger Window.
    2. Go to 'Sound, Video and Game Controllers' category, and expand it. Right click on IDT High Definition Audio Device entry and click Uninstall3. Click Start->All Programs=>REcovery Manager->click Hardware Dirver installation, select Sound Driver entry, and click Install. But, first... All--> All Programs-->HP-->Recovery Manager I do not have "Hardware Driver Installation"... so I do not know how to continue.. Any Idea?
    Thanks 

    Hi , Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that the microphone and sound are not working on your laptop. I would like to assist you. Can you post back the product number so that I can post the link where you could download the latest driver? Thank you and have a nice day! 

  • LR 2.5 Windows Vista 32 bit cannot import and hangs the computer

    Had three new folders that I was going to import into LR. When the first folder was being imported and was still rendering the 1:1 previews I started to import in the second folder. Folder one's photos imported fine but nothing was imported from folder two and LR stopped functioning and hung the PC. On rebooting, the catalog, including the first folder's contents are all there and I could do all my work with them but the moment I try  importing folder two or three I could only choose the files and thereafter will hang the program and PC. Tried copying the contents of folder two to another folder and the  same results. The photos inside folders two and three are viewable through Canon's Digital Professional software so they are still intact. I put some new photos into folder four and the same problem when I tried to import.
    Any ideas or is my LR corrupted and need to be reinstalled?

    I have reinstalled LR 2.5 and the problem is still there, I cannot import from a folder on the hard disk and also cannot import directly from a CF card connected through the USB port. The mouse still moves but LR is frozen and nothing can be selected with the mouse click. Will need to restart Windows.The strange thing is all other LR functions are not affected and as far as i could see, seems to be working like normal, only the import function is dead. What is the next course of action? Any suggestion from any one out there? Help!

Maybe you are looking for