Forms 6i Server (rel 2) with Apache

I have installed Forms 6i Forms Server Rel 2 with Patch 14 on NT with a "vanilla" Apache Server 2.0.47.
In the registry I added my application's path to FORMS60_PATH.
In formsweb.cfg I added the following entry:
[SOB]
pageTitle=S.O.B.
width=1000
height=570
serverApp=/sobapp/
form=d:\sob\opening_menu.fmx
lookAndFeel=oracle
colorScheme=teal
IE50=native
In registry.dat I modified the following line:
default.icons.iconpath=/webicons/
In apache's httpd.conf I added:
Alias /webicons "d:/webicons"
Alias /webcache "d:/orant/reports60/server/cache"
Alias /dev60temp "d:/orant/tools/web60/temp"
Alias /dev60html "d:/orant/tools/web60/html"
Alias /forms60java "d:/orant/forms60/java"
Alias /forms60code "d:/orant/forms60/java"
Alias /jinitiator "d:/orant/jinit"
Alias /sobapp/ "d:/sob/"
SetEnv FORMS60_WEB_CONFIG_FILE d:\orant\forms60\server\formsweb.cfg
SetEnv ORACLE_HOME d:\orant/
SetEnv FORMS60_PATH d:\sob/
ScriptAlias /dev60cgi/ "D:/orant/tools/web60/cgi/"
When I first used the following URL: http://<server>/dev60cgi/ifcgi60.exe?config=SOB/,
I was required to install jinitiator (1.3.1.9). Upon installation of jinitiator I got the "Forms Server is sucessfully installed" window/dialog(whaterver) that has an OK button. After I press the button I get a teal sqaure on the screen and have waited for up to 5 full minutes. Nothing. So, I leave IE6 browser and try again. Exactly the same.
But, If I enter the URL:
http://<server>/dev60cgi/ifcgi60.exe?form=d:\sob\opening_menu.fmx&userid=<user/password@<tnsentry>&otherparams=useSDI=yes&lookAndFeel=oracle&colorScheme=teal,
my form opens with a BIG exception: my toolbar fails to shows up.
IF the second URL would show my toolbar I would be "happy" but not completely satisfied. Can anyone tell me what I've done wrong. The truly frustrating this is that I have set up 6i Rel 1 with the WebDB listener many times. Why not Apache? Did I miss something really simple?
I post this here since on Metalink they say Oracle does not support "3rd party" web servers (despite article 72452.1 that specifically deals with Apache?).
Has anyone sucessfully done this? Can it be done?
TIA,
Ed.

Hi,
the problem with this URL "http://<server>/dev60cgi/ifcgi60.exe?config=SOB/" is the slash at its end. Try without and the formsweb.cfg file should be able to serve your application. The form you see by your approach is test.fmx that is called whenever someone calls a Forms application not specifying an appliaction module. Because "SOB/" is not a valid entry in your formsweb.cfg file, there is no Forms module which makes Forms launching its test.fmx file (its there to say that the server works, pressing ok quits the application)
Fran

Similar Messages

Forms 6i server with oracle Apache on 9i

Hi
has anyone configured forms 6i server with oracle Apache on oracle 9i
any suggestions
kedar

Hi Paul
I have configure as per notes on metalink 114226.1 in httpd.conf file
I have stopped IIS and restarted HTTP server
i get the default page when i enter http://<server>/dev60html/runform.htm
but when i enter port of forms server and web host as the machine name it takes along time
can u let me know if i am missing on any thing specific ?? in the setup
thanks
kedarr

Integrating tomcat 5.0.28 with apache web server 2.2

hi all
i tried a lot on net but could not get the steps for
connctivity between tomcat 5.0.28 with apache web server 2.2.
any one pzl do help me in finding the solution
pzl do tel me the step by step process for this connectivity
sus

hi :-)
you need jk modules ;-)
i havent try the integrating the version of apache web
and tomcat you specify but you can refer to the links below :-)
gudluck :-)
http://www.serverwatch.com/tutorials/article.php/2203891
http://www.onjava.com/lpt/a/2826
http://raibledesigns.com/tomcat/
regards,

How to front-end Oracle Application Server 10g with Apache 2.0

Hello,
I have a seperate apache tier from my oracle app tier and I want to use my compiled apache as a web front-end for oracle apps. I have a completely default configuration at the moment.
The only documentation I have been able to find on Oracle's site is in regard to using mod_oc4j.so with Oracle HTTP server.
Is a compiled build of apache supported with mod_oc4j?
Where can I get the mod_oc4j.so module for apache?
Is there any good documentation I can use for installing it?

You mean to say, you found mod_oc4j.so module on Application Server CD ?
It will surely be there, cos it's an Oracle supplied module.
The Oracle HTTP Server is based on Apache 1.3 web server.
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/overview.htm#sthref12
If you already have an Application Server 10g installation then go to:
$ORACLE_HOME/Apache/Apache/libexecTake mod_oc4j.so, mod_rewrite.so modules from here.
LoadModule mod_oc4j in httpd.conf file of Apache:
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule oc4j_module libexec/mod_oc4j.so
Make sure to load mod_rewrite.so before mod_oc4j.
Restart Apache.
Aalap Sharma :)

Can Test Custom Jars with 6i Run Form - Client/Server?

I want to test custom Jar files with Forms 6i from my desktop, but I cannot get the Run Form->Web to work. Is it possible for the run time to load the just jars for PJC when you do Run Form -> Client/Server? So far, when I have done this, it does not execute any PJC. Any ideas, tips?
Thanks,
Kurz

Hi Kurz
Any ideas, tips?pls have a look
http://www.dulcian.com/papers/ODTUG/2004/ODTUG%202004_Balcu1_JavaBean.htm
http://www.oracle.com/technology/sample_code/products/forms/extracted/getclientinfo/readme.html
http://www.scribd.com/doc/1027764/Forms-6i-Deploying-Forms-Applications-to-the-Web-with-Oracle-Forms-Server
Hope it helps u
Regards,
Abdetu...

Looking to pass a "root" request to a WL server with Apache plugin

Anyone know of a way to disclude a URL from the <Location> directive? I'm
using the Apache plugin and would like to pass all requests through to the
WL server except the images (which can be identified either by extension or
by location (/images)). I want a request for http://apacheserver/ to get
passed to the WL server and execute some default servlet. However... if I
use <Location /> to pass this through... everything else will get passed
through, even my image requests.
Any ideas?

Thanks for the help.
Two location directives:
<Location /myApp> and
<Location /myImages>
would end up passing my images request through to WL, no?
The way I have it set up now, I have one tag:
<Location /myApp>
which (obviously) passes the /myApp/* requests to WL. This is good...
any other request such as /images/myimage.gif stays on the web server. The
only problem is that
the initial hit to the site (www.mycompany.com) does not get passed through
and
I need it to map to a servlet on the WL server, without disrupting the flow
of a
/images/* request.. I have no images on the WL server.
Anyone know of a way to disclude a URL from the <Location> directive?I'm
using the Apache plugin and would like to pass all requests through tothe
WL server except the images (which can be identified either by extensionor
by location (/images)). I want a request for http://apacheserver/ to
get
passed to the WL server and execute some default servlet. However... ifI
use <Location /> to pass this through... everything else will get passed
through, even my image requests.
Have your application reside at /myApp and images in /myImages. Then two
<Location> stanzas,
one for /myApp and one for /myImages will do what you want. I have an
open case with support
where I wanted /myApp/myImages and /myApp to resolve in the order the
<Location> directives
were found in httpd.conf, in much the same way you can have / and
/images with
Apache handling /images and WLS handing / . The case is still open and
the workaround is
described in the first sentence of this paragraph :)

10g Application Server rel 3 and 10g form & report

hi all
i want to run 10g form & report 10g Application server rel 3 any one tel me about that thanks

Hi,
You can find a similar discussion at this link :-
start AS automatically
You can also get a good ideas from these two Metalink Notes :-
1. Note:223285.1 :- Shell scripts to start and stop IAS 9.0.2.2 (Infrastructure - Middle tier) on Unix
2. Note:200475.1 :- 9iAS Release 2 (9.0.2) Start/Stop Instructions on Unix
The notes are basically for IAS 9.0.2., but can be easily customized for other IAS versions.
Regards,
Sandeep

Issues in ssl configuration with apache server (using reverse proxy)

Hi,
I am able to use apache server as a reverse proxy to connect to Portal. When I enter the web server url as https://mywebserver.com, I am able to connect to the http url of the Portal. But the moment I try to connect to the https url of Portal with this https url, I am not able to connect to the Portal. Thus I am not able to use apache as a proxy server for https connections it makes. What must I do. I read that mod_proxy_connect needs to be used, but how do I use this?
The second problem is that I need to use more than one kind of mapping.
For example I must be redirected to the Portal even if I use http://webserver.com , or even if I use https://webserver.com or even if I use http://webserver.com/irj or https://webserver.com/irj or http://ipaddress-websserver/irj etc

I have SSLCertificateFile and
and SSLCertificateKeyFile .
My problem is with regard to ssl/CertificateChainFile?
what is this? Also how do I upload my J2EE Certificate into apache.
The problem is with Apache handshake is not happening.
I am forwarding the entire log during . I have put what I consider important in bold.Please have a look.
<b>----
</b>
Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1769): OpenSSL: Handshake: start
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: before/connect initialization
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv2/v3 write client hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 7/7 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 16 03 01 04 1a 02                                ......           |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 0007 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 1048/1048 bytes from BIO#629160 [mem: 47855af] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 00 36 03 01 44 74 67 cb-38 b5 8e 42 3b 59 c3 6c .6..Dtg.8..B;Y.l |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0010: 23 5c 07 d0 8b 24 89 89-11 2e 0d 80 ed 1a 06 ea #
...$.......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0020: 1d 10 b0 59 10 28 7c b4-02 cb d6 08 a8 e4 ea 5a ...Y.(|........Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0030: e5 88 5c 5d 90 00 39 00-0b 00 01 cc 00 01 c9 00 ..
]..9......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0040: 01 c6 30 82 01 c2 30 82-01 2b a0 03 02 01 02 02 ..0...0..+...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0050: 04 36 0b 23 72 30 0d 06-09 2a 86 48 86 f7 0d 01 .6.#r0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0060: 01 04 05 00 30 14 31 12-30 10 06 03 55 04 03 13 ....0.1.0...U... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0070: 09 6c 6f 63 61 6c 68 6f-73 74 30 1e 17 0d 30 33 .localhost0...03 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0080: 31 30 30 32 30 37 32 35-30 30 5a 17 0d 30 35 31 1002072500Z..051 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0090: 30 30 32 30 37 32 35 30-30 5a 30 14 31 12 30 10 002072500Z0.1.0. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00a0: 06 03 55 04 03 13 09 6c-6f 63 61 6c 68 6f 73 74 ..U....localhost |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00b0: 30 81 9f 30 0d 06 09 2a-86 48 86 f7 0d 01 01 01 0..0...*.H...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00c0: 05 00 03 81 8d 00 30 81-89 02 81 81 00 ef d6 ff ......0......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00d0: a6 39 e1 64 a5 d3 fb 16-de 4e ee 1d 81 84 31 bc .9.d.....N....1. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00e0: e6 b7 96 07 3e 81 b9 94-d1 c1 e0 f9 00 3a 84 e8 ....>........:.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00f0: 7a 30 11 cd 41 26 d6 6c-95 90 93 95 17 e0 1a b7 z0..A&.l........ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0100: 00 0f 59 33 7d 1d f3 a0-83 17 c5 f3 7e b3 ad ed ..Y3}.......~... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0110: c9 60 ac af 9e 31 d2 ec-42 71 f9 c3 98 2e 93 f9 .`...1..Bq...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0120: 9d c3 c4 3d b3 7d 9b 97-83 1c 6b bd c0 75 cc 96 ...=.}....k..u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0130: dc b9 a0 1b 00 79 85 e4-19 1f 61 42 54 db 91 94 .....y....aBT... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0140: d8 1d 72 13 08 36 22 49-3b fb 05 dc 33 02 03 01 ..r..6"I;...3... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0150: 00 01 a3 21 30 1f 30 1d-06 03 55 1d 0e 04 16 04 ...!0.0...U..... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0160: 14 ed ed 02 af 94 13 59-1c 42 e6 69 40 e5 80 dd .......Y.B.i@... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0170: a4 e9 33 91 02 30 0d 06-09 2a 86 48 86 f7 0d 01 ..3..0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0180: 01 04 05 00 03 81 81 00-2c 22 08 bd 71 b6 80 43 ........,"..q..C |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0190: 5a 2a 8b e8 62 34 b4 b4-84 8a 47 4b 97 5e bf dd Z*..b4....GK.^.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01a0: 17 4c 0a 1c b7 0e cd c5-d1 cc d8 77 cd 38 10 ef .L.........w.8.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01b0: 22 02 f0 02 7f a2 39 2b-53 eb 31 b6 18 49 37 a0 ".....9+S.1..I7. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01c0: 50 47 f2 34 ab 33 eb 5f-ec 5a f9 f7 53 5f 27 eb PG.4.3._.Z..S_'. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01d0: 02 7f b4 28 3e e8 b1 c7-59 df 2c 93 25 c5 34 14 ...(>...Y.,.%.4. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01e0: 7a 34 7c 45 b4 eb 6b 34-93 26 98 51 37 d3 e6 b0 z4|E..k4.&.Q7... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01f0: 7f 83 e3 a9 04 d3 47 b3-3d de 43 57 27 45 82 c0 ......G.=.CW'E.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0200: 4d 48 bf c0 a7 2f 66 0c-0c 00 02 08 00 80 af 76 MH.../f........v |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0210: 1f f5 f6 48 a0 01 0f ed-55 4c 53 9a 7c 07 7a ba ...H....ULS.|.z. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0220: c7 9d 77 e8 8b c7 66 8f-80 03 18 c5 1f 4f 2a a0 ..w...f......O*. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0230: 08 6f 9f e3 13 94 30 56-e7 2f 96 7c 26 97 ba 12 .o....0V./.|&... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0240: aa fd 3e 43 e1 46 c2 d1-32 94 56 45 52 c0 24 6f ..>C.F..2.VER.$o |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0250: 38 e0 93 0f 3a f8 0a 7c-41 0e 4c 54 4f 5a 7e d4 8...:..|A.LTOZ~. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0260: 62 e6 71 cd a0 dc 1e 9b-17 e5 10 71 3c 9d c6 39 b.q........q<..9 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0270: 05 50 b6 15 37 0b 68 4f-24 50 74 47 13 1c 74 d8 .P..7.hO$PtG..t. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0280: 81 27 81 71 3a 4a c5 26-7d b8 e6 21 b3 d9 00 80 .'.q:J.&}..!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0290: 4f 6f 5d e6 2d dc 77 46-e6 77 b1 94 3d 65 5b b0 Oo].-.wF.w..=e[. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02a0: 3d 39 7a 6c a2 c7 0b e3-27 08 fa 48 8d 75 1a fe =9zl....'..H.u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02b0: 32 e6 13 d1 31 65 7d d5-11 34 21 78 38 d1 11 fb 2...1e}..4!x8... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02c0: ea 59 8e 24 79 5a 4b c2-f7 98 22 51 9f a7 4d 2b .Y.$yZK..."Q..M+ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02d0: 15 98 fe d4 43 4b 34 25-b3 9b b3 ae 57 d1 ea 69 ....CK4%....W..i |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02e0: 6e 02 7e 61 d7 80 b6 73-6a 3e ac eb 69 38 67 8f n.~a...sj>..i8g. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02f0: a9 2a dc 93 3d 22 f3 6e-6a 5d 51 1f b1 b1 10 5e .*..=".nj]Q....^ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0300: 82 28 48 0d 5a 78 f8 17-61 e0 c5 43 61 7a 42 6a .(H.Zx..a..CazBj |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0310: 00 80 42 fa 7e 11 b2 77-3a 8c de f1 52 5a e1 18 ..B.~..w:...RZ.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0320: d4 e7 8f ee 2c e0 06 ef-d5 37 87 62 07 14 d1 5a ....,....7.b...Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0330: ca 30 be fd dd 76 47 8f-ed f4 5f f3 64 6c 32 a9 .0...vG..._.dl2. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0340: d5 07 e2 9b f1 29 a3 bf-33 4a ed 72 6b 2e c3 0f .....)..3J.rk... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0350: 30 bd 13 a1 42 d8 f7 1d-58 8a 1c 53 d6 c3 c8 6e 0...B...X..S...n |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0360: 0e 51 e3 f5 a0 37 68 0d-04 c6 0e c4 4d cc ed 7c .Q...7h.....M..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0370: ef 8f 81 b3 52 34 0c 60-eb f8 01 19 cc 95 31 55 ....R4.`......1U |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0380: 7d 16 bf 0c df b8 e0 3d-8f 7c 7a 4a 64 98 93 59 }......=.|zJd..Y |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0390: eb ae 00 80 ef cb bc 38-ab 16 0e a2 b2 2d fa 0f .......8.....-.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03a0: da 55 2d 67 a8 b8 34 1b-bf 39 d9 d6 da 65 f2 8f .U-g..4..9...e.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03b0: 6f a2 b1 1d db bb d5 dd-ab cf 9e 63 00 e4 57 a5 o..........c..W. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03c0: 18 4a dc 60 b0 97 5d 67-34 96 bf a2 43 2b 7d 70 .J.`..]g4...C+}p |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03d0: d6 99 d2 31 d2 11 f4 f2-19 b8 0c 41 7d bf b1 7c ...1.......A}..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03e0: fb 31 cb 3e c2 0a e2 26-1a 7e 63 50 9b 62 c3 82 .1.>...&.~cP.b.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03f0: ca cd 36 82 0c 56 5f 26-f6 cc c6 6f 03 92 cc f5 ..6..V_&...o.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0400: 6b 55 1a d6 92 f9 5b 59-18 c2 62 21 eb d8 a4 ea kU....[Y..b!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0410: fd b6 3e f7 0e                                   ..>..            |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 1048 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server certificate A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server done A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write client key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write change cipher spec A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 flush data
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 5/5 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 15 03 01 00 02                                   .....            |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 2/2 bytes from BIO#629160 [mem: 47855ad] (BIO dump follows)
Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 02 28                                            .(               |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1782): OpenSSL: Read: SSLv3 read finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1801): OpenSSL: Exit: failed in SSLv3 read finished A
[Wed May 24 07:03:54 2006] [info] SSL Proxy connect failed
[Wed May 24 07:03:54 2006] [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
[Wed May 24 07:03:54 2006] [info] Connection to child 249 closed with abortive shutdown(server apacheserver:443, client j2eeserver)
[Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserver)
[<b>Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserve) from apacheserver ()
[Wed May 24 07:04:10 2006] [debug] ssl_engine_io.c(1523): OpenSSL: I/O error, 5 bytes expected to read on BIO#612610 [mem: 62ac80]
[Wed May 24 07:04:10 2006] [info] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : SSL input filter read failed.
[Wed May 24 07:04:10 2006] [debug] ssl_engine_kernel.c(1787): OpenSSL: Write: SSL negotiation finished successfully
[Wed May 24 07:04:10 2006] [info] Connection to child 249 closed with standard shutdown(server apacheserver:443, client apacheserver)
</b>

Can Forms 9i run on a different Application Server, e.g. Apache?

Can Forms/Reports 9i run on a different Application Server, e.g. Apache? i.e. without needing to use 9iAS.
It is quoted in the document "Migrating Client/Server to the web" that it may be possible, but will not be supported. Is this possible?
The reason I ask this is due to the costs involved of 9iAS. If I can use an alternative route like Apache / Tomcat, it's free. Then I only need the developer suite licensing.
Thanks,
Jacques

Just so you'll know Oracle9iAS also includes apache as the HTTP server.
As Suncan said, if you want to use Forms on the Web you need the Forms Server engine, and it comes bundled in Oracle9iAS. You'll save yourself a lot of headache if you just install Oracle9iAS and have everything pre-configured for you thus reducing maintanance costs.

The tab is bad with apache web server and tomcat

the tab not run with apache web server + tomcat.
It is very bad..

Fijate que solo he estado experimentando con JSC, no he tenido oportunidad de poner nada en producci�n usando la combinaci�n Apache Web Server y Tomcat JSP container y no cuento en �ste momento con �sta configuraci�n para probar.
Nosotros (en donde trabajo) usamos IBM Web Server (basado en Apache Web Server 2), IBM Websphere 6 y las aplicaciones JSF en producci�n est�n hechas con Rational Web Developer.
Ahora he estado muy ocupado con un proyecto urgente, si tengo alg�n tiempo libre la semana entrante tratar� de probar tu combinaci�n (no te prometo nada) pero para ello necesito que me digas las versiones que est�s usando de Apache Web Server y de Tomcat, como est�s enlazando entre ambos con un m�dulo o con ProxyPass y mejor si me mandas el httpd.conf.
Saludos.

Webtogo with Apache Server

Hi,
I've already installed Oracle Webtogo Server on my machine with Apache server.
My webtogo server runs on 80 port and Apache server on 90 port.
I would like configuring the webtogo module on the Apache server.
I've put the following line in apache's httpd.conf's file:
LoadModule WTG_Module
OracleHome\webtogo\bin\wtgapach.dll
<Location /webtogo>
SetHandler web-to-go
</Location>
I've stopped the server and reloaded, but i've gotten this error:
Loaded DSO <dll's path> use plain Apache 1.3 API, this module might crash under EAPI, please recompile it with -DEAPI.
I don't understand the meaning of RECOMPILE WITH -DEAPI.
Best regards,
Simone
null

Hi Guys,
I didnt check this from past one month, thanks all for your replies
I found solution for this in metalink
i.e.
in context file
<directory_index oa_var="s_directory_index">index.jsp index.html</directory_index>
change this to
<directory_index oa_var="s_directory_index">index.html</directory_index>
and run autoconfig
and restart apache server
Thanks,
Bhanu Chander

Svn with Apache Timeout issue

Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Forms 6i based application compatibility with Oracle Lite 10g

My client is currently using an Oracle Forms 6i based application (together with a Jinitiator)
in an application deployed to 50 countries using Oracle Lite 9i as the Mobile Application Server and Oracle 8i as the database.
We are considering an update to Oracle 10g database and 10g Rel 3 mobile application server.
Can anyone advise on the impact of such an application on the Forms 6i application and if there is a recommended process for the upgrade of the forms application?

do you mean the OAS 10g Rel. 3 ? That application server has no forms-component. Only the Rel.2
Your Forms 6i is certified against 10g databases with patch 17 and 18. Download them from the metalink.oracle.com

May i can't have Forms+Reports server on the same machine ?

Gurus!
I have installed Forms+Reports server on the same machine with their builders too. But then Forms & Reports server does not function when i call my .fmx file in browser the message,
"Java applet loading" appears but then the process hang up.
But when only installed Form server my .fmx file works.I also want to call my .rep files from forms.
May i can not have Forms+Reports server on the same machine?
Separately they work but not both but i require both how!
I have also seen when both installed and when i start services of both then ifweb60.exe is called two times in memory, it shows from task manager's process tab.
Please help!
Many thanks

1. Check these files to make sure you have the correct port settings for your forms: formsweb.cfg, base.htm
2. In your Windows Registry:
a. Add path for Reports Server (REPORTSxx_PATH)
b. Make sure you also have FORMSxx_PATH defined
c. Check values of your OracleFormsServer.
HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Services
OracleFormsServer
Verify the values of Host, Mode, Pool and Port.
3. Check Metalink Note 97487.1 for additional info.
And YES, Apache, Forms, Reports and Graphics can all run in the same machine.

How to add a new font into Report Builder and Oracle Forms/Reports Server?

Hi,
I've searched the forum and can't find this being discussed.
My developers run Report Builder 10.1.2.0.2 on their XP laptops.
Their reports run (in production) on Oracle Forms/Reports Server 10.1.2.0.2.
This server runs on MS Windows 2003, SP2.
They've got a client who wants reports using the "Garamond Western" font.
So....how do I get this font onto the developer's Report Builder laptops, and onto the Oracle Forms/Reports Server?
I've moved various 'Garamond' fonts into C:\WINDOWS\FONTS on both the laptops and the server, but neither seem to recognize it.
Thanks for your help.

Thanks.
This answers 1/2 of my question.
The developer can now use Report Builder on his laptop, with the new fonts.
But when he moves this new Report to the Oracle Application Server/Forms-Reports Server, it fails to use the new fonts.
The Oracle App Server/Forms-Report Server is Version 10.1.2.0.2. It runs on MS Windows 2003, SP2.
I have installed the exact same fonts on this server, into C:\WINDOWS\Fonts.
I have used REGEDIT to change REPORTS_PATH....and placed C:\WINDOWS\Fonts; as the first value in this field.
I have then stopped and restarted the Forms-Reports Server.

Forms 6i Server (rel 2) with Apache

Similar Messages

Maybe you are looking for