Forms 6i setup.exe will not run

I am trying to uninstall Forms 6i from a PC (Windows XP) and the manual recommends doing it via the installer.
However the installer (setup.exe) will not run. No error message, control just returns after double click.
I am pretty sure this was how we originally installed Forms 6i but for some reason it does not run now.
Tried a couple of things like turning DEP off, to no effect.
Anybody has an idea where the problem is?
Or should I just uninstall the hard way by deleting the folders and cleaning up the registry manually

Hai,
In The Properties of the setup file, there is a Tab Named Compatibility. In that tick the Run this program in compatibility mode for:
and select the latest Operating system listed in the Combo box. (Eg: Windows 2000).
and Press OK.
then it will work.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Similar Messages

  • I am trying to install the trial version of Acrobat but the file AdobeDownloadAssistant.exe will not run -it gives an unnumbered error that the file is not configured correctly. "This application cannot be installed...Please contact the application author

    I can't install the trial version of Adobe Acrobat because the AdobeDownloadAssistant.exe will not run. I get this error:
    "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
    I completed the trial questionnaire & all seemed well. Can anyone help?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Firefox often hags with an error message somethng like_Script not complete or still running._I cannot uninstall Firefox with the uninstall program routine inthe control panel and the Mozilla uninstall helper.exe will not run either. How do I uninstall Fi

    Firefox hangs with an error message something like - Script not complete or still running.
    I cannot uninstall Firefox with the uninstall program routine in the Control Panel and the Mozilla uninstall helper.exe program will not run either. How do I completely uninstall Firefox so I can make a clean reload?
    == This happened ==
    Every time Firefox opened
    == Not sure but I think it was after the update

    Thanks for the reply.
    I am very new to these forums (or is it fora?).
    I didn't know there was a Tomcat forum.
    How to I find it.
    Ta much & best regards,
    Pete

  • 9ias setup exe could not run

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name : download.oracle.com...
    - Filename
    - Date/Time : 27,28 August 2002
    - Browser + Version : Internet explorer 6.0
    - O/S + Version : Windows XP 2002
    Hi,
    -After downloading and unzipping 9ias i could not run
    the setup.exe
    my computer has pentium 4
    i know there is aproblem with p4 and universal installer
    but what is the exact solution ?
    -I' am also wondering if there is a sertification with windows XP or not
    to not to waste my time
    Could anyone help me with this
    Waiting for a reply
    thanks !

    Hi,
    Please right click the setup.exe and choose run as administrator.
    Sometime, it may be caused by missing or corrupted system files, run SFC.
    Start>click cmd in the search box>type SFC/scannow.
    And sometimes other software, especially security type programs, can interfere with your installations.
    Test in Safe mode to see if the issue persists.
    Restart the computer, press F8 before the windows logo appears.
    If still cannot install, test with install .exe file in another computer. If the same issue, the issue may be the setup file itself. If can install in another computer, it may be the issue of the windows installer.
    Follow the steps in the kb to troubleshoot the issue.
    How to troubleshoot issues with Windows installer service
    http://support.microsoft.com/kb/2438651/en-us
    Regards,
    Ada Liu
    TechNet Community Support

  • Setup.exe does not run

    Hi,everyone,
    I have a question about installing oracle 9i on windows 2000.
    I downloaded three zip files and recorded them on CD-Rs and extract them into three different folders on another computer. After the extraction, when I clicked on setup.exe in the first folder, it did run. How can I solve this problem?
    Any help will be highly appreciated.
    thanks
    Joe

    hi to everybody.
    To make you notice if you have this oracle which is not 9i and you apentium 4 Computer than there is a bug of the JRE so you got to download the new realease.

  • Firefox Setup 9.0.1.exe will not run when I select as "Run As" option

    I downloaded the update no problem. After I click "Run" after the "Do you want to run this file?" window, I get a prompt asking which user I want to run the file as. The only account on my computer is my own, and I am recognized as Administrator. No matter what option I choose, once I click "OK," absolutely nothing happens. The update extraction does not proceed.

    -> Update Firefox to the latest version (9.0.1)
    * [[Installing Firefox on Windows]]
    Check and tell if its working.

  • HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running".  Windows 7.

    After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run.  itunes will not now run.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Mini ipad is disabled and I downloaded Itunes but the exe file will not run

    mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Boot Camp Update 2.1 will not run

    I'm trying to install Windows XP on my Intel Macbook. It's a legal copy purchased from Microsoft so no trouble there.
    The Bootcamp Assistant worked fine and the Windows install worked fine. I'm now at the point of trying to install the Boot Camp drivers but I don't have my Leopard disc available. (I bought a an OS X Family Pack and my son currently has the discs 20 miles away.)
    Accordingly, I downloaded the Boot Camp 2.1 update from Apple but it simply will not run under Windows in the Boot Camp partition. It briefly looks (1-2 seconds) as though it's starting, but then never does.
    I tested the .exe file on a pure Windows machine and it runs fine so there's no file corruption problems.
    I've searched online but can't seem to find any solution to this particular problem.

    djrichards wrote:
    Thanks for the response, Stefan.
    But that's not what the Apple download page says. Specifically it says the following.
    "Note: This download contains complete copies of Boot Camp Windows XP Drivers (version 2.1). If you have Boot Camp drivers already installed, it will update them. If you do not have any Boot Camp drivers installed, it will install version 2.1 drivers onto your already installed Windows OS."
    Hi,
    I admit I haven't ever taken a closer look at that and as said to my knowledge, the 2.1 update only works with the 2.0 drivers already installed.
    Just did a quick googling and couldn't find any success story of using the 2.1 Update as a standalone driver install without having the 2.0 driver installed before.
    Do you have the needed Admin rights when running the update.exe ?
    Stefan

  • Itunes will not run on my pc after update: see error messageProblem Event Name:     BEX

    Itunes will not run on my pc after update, i get this error message:
    Problem Event Name:          BEX
    Application Name:               itunes.exe
    Aplication Version               10.7.0.21
    Application Time Stamp          504d85d9
    Fault mode Name:               Quicktime.qts_unloaded
    Any Ideas on a fix??

    Fault mode Name:               Quicktime.qts_unloaded
    Try updating your QuickTime Player to the most recent version. Does that clear up the launch errors?

  • Unwise.exe Files not run on Windows 8.1 SSSS

    So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
    what should i do?
    Reply Please!

    So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
    what should i do?
    Reply Please!

  • PSE 5 will not run in Windows 7?

    Hi,
    I recently upgraded from Windows Vista 32 bit to Windows 7 64 bit - I reinstalled PSE 5 but now it will not run.
    I get the following errors:
    - Could not load the FastCore Routines module because the file could not be found.
    - Could not load the MMXCore Routines module because the file could not be found.
    - Could not load the Multiprocessor Support module because the file could not be found.
    - Could not initialize Photoshop Elements because the file could not be found.
    - The action you have requested could not be completed because the application is not responding. It may still be loading or waiting for a response from you.
    I searched for the errors on the forums and found the common responses that the 5.0.2 update needed to be installed. I installed the update but it hasn't fixed the problem.
    I also saw that many people had managed to run it using compatibility mode - I have tried running it in Windows Vista/SP1/SP2, Windows XP etc but nothing likes it.
    Can anybody please help? I had absolutely no problems with this software before and I'm half tempted to buy PSE 10 (which I can't afford to do) just to save me the hassle.
    Thanks in advance.

    Hi Laura,
    Since you've uninstalled and re-installed PSE5, we have to assume that those files are in the correct location.  If someone here has PSE5 installed, it would be nice if they can confirm that.
    The next thing to try is disabling Data Execution Prevention (DEP) for the editor:
    Use Start...Control Panel...System.
    On the left, select "System Protection".
    Select the "Advanced" tab.
    Click the "Settings" button in the "Performance" section.
    Click on the "Data Execution Prevention" tab.
    Use the bottom radio button ("Turn on DEP...except those I select").
    Click the "Add" button, then browse to the
    "C:\Program Files (x86)\Adobe\Photoshop Elements 5\PhotoshopElementsEditor.exe"
    file.
    Make sure that the editor's file has a check in its box, and do "OK" to back out of all the dialog boxes.
    Reboot.
    Ken

  • Itunes error 45075, itunes will not run help

    from a system clean up and deletion of restore points!! iTunes ill not run I have tied reinstalling, repairing, uninstalling following with an install and still it will not run! I have obviously deleted something relatively important and now the computer has no restore point which will resolve my issue.
    Help is greatly appreciated.

    The 2096 erro may be associated with running in compatabilty mode, see:
    http://docs.info.apple.com/article.html?artnum=305212
    None of the tick boxes on the compatability tab should be checked.
    It is also worth checking iTunes.exe in c:Program Files\iTunes.

  • Have a month number but QaaWs query will not run

    If I type in the parameters for the query it runs with no problem, but when I use the MONTH function that returns the month number the query will not run.
    I think the date serial number is what is being passed even though I see a number being display.  Does anyone know how to conver this MONTH() function to a true number?  This is a converted 4.5 model that works just fine, but looks like they tightened things up in 2008.
    Thanks...
    Tom Nather

    Here is how its setup.  I have a QaaWs query that returns the max date, then Excel functions that calculate the date back 13 months.  One of the functions is MONTH() that returns the month number based on a date stored in a cell, not really a true number.
    I added a vlookup that takes the month from a date field (05/31/2008) and looks up the appropriate NUMBER of the month =VLOOKUP(MONTH(K47),M54:M65,1). Find 5 (which is defined as a number.
    This then is applied to the input side for the Qaaws (Month Number = double) using a Paste Link function from the CONTROLS sheet in excel, and the query then works.
    Anything that is a date always seems to be built off of the date serial number so this was the easiest way to get this to work. 
    I think standards have been tightened up using the Flex language vs. what 4.5 was written in, this works in 4.5 without the necessary conversion.

  • System Will not run at FSB166

    Ok, well after playing with several configurations i am still no further forward on my little CPU FSB Saga.
    So this is what i have found out so far and maybe someone can shed some light.
    I have a Barton 2800+ CPU, if i run this CPU at its correct FSB of 166 my system is very unstable. 3dMark03 Will lock during the CPU test and if i use Prime95 my PC will lock within 30 Seconds. Grrrrrrr, ( Lots of profanity )
    So i clocked my CPU to 133FSB, now its just an XP2200, well thats what it says anyway.
    However no more lock ups. 3dMark03 runs through without a problem, Prime95 runs for hours without an error.
    So i decided to try something else, in my other PC i have an XP2000+ FSB133 CPU running on an MSI KT3 Ultra Board. This PC works like a dream.
    I took the CPU out of there and put it in to my K7N2 Delta Board and setup the FSB as 133 ( Correct for the CPU )
    And what happened, well it started to lock up again.
    So i clocked the FSB down to 100 and now this CPU works fine in the delta board with no Lock ups.
    So has anyone got any idea why my cpu's will not run at there correct FSB on this board.
    My 2800+ will run at 133FSB and not 166FSB
    My 2000+ will run at 100FSB and not 133FSB
    I know that the CPU must be ok because upon returning the XP2000+ back to the KT3 Ultra Board i have it works fine without a problem with 3dmark03 and Prime95.
    Its only when it is in my K7N2 Delta board running at the correct FSB.
    Your thoughts on this are much appreciated.

    Quote
    Originally posted by JCLogix
    Well its unbelievable i know but i finally have a working system.
    Up on the advice of the guy at MSI Technical Support in the USA i took my K7N2 Delta board back and got a brand new one. Rebuilt and re-installed my system and my god it worked. I am now running my Barton 2800+ at the correct FSB of 166 and now the correct speed. Prime95 and 3d Mark03 run without a problem.
    On my old board Prime95 would lock my system in less than 30 seconds, its been running for 6 hours now without error. The CPU test in 3dmark 03 would lock everytime and now i\'ve run it thirty times and it goes through everytime.
    So yes i guess my motherboard was just screwed.
    However i have noticed some difference between my first K7N2 board and my new one. These may mean nothing, thoughts on these would be good.
    Old Board came with Bios 7.0 on it.
    New board has Bios 7.2
    Old board Manual was red colour and Raid Manual was Blue
    New Board Manual was orange colour and Raid was Green
    Old Board had no sticker on South Bridge
    New Board had a FSB400 Green Sticker on South Bridge.
    Plus i have noticed that the voltages and temperatures on my new board are much more stable than before. Less jumping up and down.
    Everything else i think was the same.
    I know they are minor and may mean nothing, it was the sticker that i found interesting. Why did my first board not have that. Why suddenly put it on ?
    Anyway, one new board later and my barton 2800+ is now running stable, so i\'m happy and i guess this proves the boards can work with them.
    A special thanks to wonkanoby, your help in this issue was most appreciated. You certainly did make me think about a few things. I have of course mad sure i have re-fitted my heatsink right =) even put some nice as3 on it.
    Anyway, i\'m not sure what to suggest to you guys still having problems. Does your south bridge have a sticker on it? Maybe they have a new version of the board out, i don\'t know. Comments People? does anyone know anything.
    Well this draws my story to a close.
    Good luck to everyone else, hope you get your systems running.
    Laters
    JC
    Congratulations... I'm glad that it worked out for you.  
    But what you are telling me seems that MSI put a new release of the board on the market with a lot of bugfixes in it  :( .
    But this means that i have to get 2 boards back to the shop and claim 2 new boards. But the problem is that i have to drive about 3 hours and have to pay because i have the boards for a month now. This is in my eyes unacceptable. I'm going to write MSI and ask them if the have another idea to help me out. But i'm glad that we know what the problem is and i give you a lot of pleasure with the machine.  )  )  )  )
    Greetings
    BoyOne

Maybe you are looking for