Forms 6i webforms under Win 2000

I was trying to use Forms 6i under win 2000 and I get a message on the install indicating webforms only runs on NT. I understand the problem, but how long will it be before you have a version for win 2000?
Or is their additional docs that would help with this install?
Thanks
Mark

Frank:
On the install I have a box come up that says
"You have selected Developer 2000 Webforms which is installble only on Windows NT 4.0 only. Press OK to continue to install other modules or press cancel to terminate".
Other modules install. Just the webforms does not.
This was our first install on Win 2000. We had planned 2000 as the operating system for 9iAS also. Are we better off just going back to NT 4.0 for now? Is 9iAS win 2000 ready?
Thanks
Mark
null

Similar Messages

  • Oracle Apps 11i under Win 2000/NT

    I'm having some problems installation 11i with rapid install. I'm trying to install the visions demo but can't seem to get it right. The following are the things that I did.
    1. Fresh install of Windows (2000 twice and NT server once, both without IIS install)
    2. Using windowsupdate, applied all patches and rebooted
    3. created USER ORACLE and USER APPLMGR. Logon as ORACLE user Copied all cd's to STAGE11i directory
    4. Ran rapid install wizard and selected single node install
    5. Unselected PROD option and selected VIS option
    6. Entered password for APPLMGR and complete DNS name for machine and left everything else as default.
    7. Rapid install completes with no errors.
    Results:
    Can bring up oracle install portal but can't log onto apps using logon links. I realized that OracleConcMgrVIS and the webDb listeners (2.2 and 2.5) would not come up under services. Tried starting them manually, OracleConcMgrVIS starts but can't start either WeDB Listener VIS service. What am I doing wrong??? Tried this on both Windows 2000 server and windows NT 4.0 server with similar results!!!
    null

    Rakesh,
    No, we not bounced the database. We will get the outage only by tomorrow.Check if you get the same error after bouncing the database.
    When we close the IE and login back its going in with out issue. Is there any other specific issue on why we are getting "Oracle error &ERRNO: &REASON has been detected in &ROUTINE." apart from the org_id & triggers.I guess not.
    Note: 311329.1 - Unable to login: &REASON has been detected in &ROUTINE
    Note: 464072.1 - Unable to login: &ERRNO: &REASON has been detected in &ROUTINE
    Regards,
    Hussein

  • Drivers for Sun Floppy under Win 2000 on SUN Pci card.

    Hi,
    I'm running a Sun Blade 150 with Solaris 8. I have a Sun Pci card with Windows 2000 loaded. When Win2k boots, it asks for drivers for a "sun floppy". I've looked around for these drivers but I can't find them. Can anyone point me to them. Thanks.

    Take a closer look at the actual card,
    particularly at the central Ethernet chip.
    If I recall correctly, it is a DEC DC2115x chipset for 10/100Mbit connectivity,
    and should be natively recognized by Linux.
    The 501-5406 QFE card, as shown on a 3rd party web site.
    Install it and boot your system.
    You should know in just a few moments whether it'll work,
    or whether the Sun firmware is of any concern.

  • How would one communicate with a custom I/O card under Win 2000 and Labview?

    Hypothetically speaking, if I were to develop a custom prototyping PCI card interface using addresses 300 to 303, what would be involved in getting LabVIEW to communicate with this prototyping card? What issues may be important in the development of the prototype card itself?

    Hi Robert,
    NI-VISA offers you the ability access the hardware directly.
    Issues?
    Speed, I believe this is not the fastest way to get at the registers.
    Determinism, if your device will require the CPU get back to it on a regular basis, Windows could get in the way.
    Just the thoughts that come to mind. I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Get Windows Folder Paths on Win 2000

    I downloaded the windows_folder_path.vi from NI site, where I can see that "This VI is supported on Windows 2000, XP, and Vista."
    If I use it in an executable that searches for Application Data folder, it works under XP, but it doesn't under a fresh Win 2000 SP4 installation.
    A pop-up with the message:
    Entry poin Not found
    The procedure entry point SaferGetPolicyInformation could not be located in the dynamic link library ADVAPI32.dll
    is shown.
    When I press the OK button, another popup
    LabVIEW: Resource not found.
    An error occurred loading VI 'windows_folder_path.vi'.
    LabVIEW load error code 3: Could not load front panel.
    I'm confused because here (MSDN, Microsoft Developer Network) I can see that  the SaferGetPolicyInformationfunction requires WinXP or Vista
    Isn't this vi expected working properly under Win 2000?
    In the next days I'll do the same test on a Vista machine, and I hope.... 
    How can I get the Application Data path on WinXP, 2000 and Vista? With different languages OS this folder has a different name (Application Data, Dati Applicazioni, ...) so I can't build the path by myself.
    I don't know if this helps, but I'm developing with LabVIEW 8.2.1and WinXP Pro
    Vix
    In claris non fit interpretatio
    Using LV 2013 SP1 on Win 7 64bit
    Using LV 8.2.1 on WinXP SP3
    Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
    Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
    Solved!
    Go to Solution.

    Use the registry functions of LV to get direct access.
    The folders for the current logged in user is under:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre​ntVersion\Explorer\Shell Folders, the value is AppData
    The Fodlers for all users is under:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr​entVersion\Explorer\Shell Folders, the value is Common AppData
    Message Edited by waldemar.hersacher on 10-22-2008 10:10 AM
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Crash when genarating forms on Win 2000

    When we generate some complex moduls with forms
    generator on Win 2000, the generator posts the messages
    of internal error which occurs in some function inside generator.
    Sometimes the designer is also close by OS because of
    illegal operation.
    On Win NT 4.0 the generation produce nice form.
    We use Designer 6i rel. 2. Is there maybe some patch on rel 2 for Win 2000 ?
    We can't migrate to release 4 now.
    Saso Celarc

    Hi,
    Can you please give some more details as to what all things you have in a module which is giving error??
    Thanks
    Vishal

  • Related to creating pdf file through form6i in Win 2000

    I have created a form which will generate pdf file by calling a report. I am able to generate pdf files in platforms like Win 2000,Win NT,Win 98. But expect in Win 2000, I am able to read the pdf file in acrobat.
    The error displayed while opening pdf in acrobat is: There was a error processing this page,There was a problem to read this page (122).
    Form6i and Reports6i is installed in Win 2000 and acrobat reader version is 5.0
    Please answer my question immediately

    Sorry Im totally new to acrobat so this may seem like a daft question> I have scanned a document through a document feed scanner into a pdf format but some of the pages are orientated the wrong way within the pdf, is there a way to change the direction of pages and then save the whole pdf again so that everything is the right way round. I know that you can change the orintation while reading the pdf but as this is being put into web ct for students I would prefer for them not to have to do this.

  • Enterprise Manager Console does not start on Win 2000 Pro

    I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
    I have installed many times, but it is never successfull.
    I was installing Enterprise Edition -> General Purpose database.
    Tried the following from command prompt:
    oemapp.bat I get this message : "Usage: oemapp <application_name>"
    oemapp consoleI get : "bad command or file name"
    oemapp console oem.loginmode=standaloneI get : "bad command or file name"
    Is there any post installation configurations that need to be done?
    When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
    Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
    In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
    Could some one help me with this.
    Thanks,
    Aruna

    Marcus,
    Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
    Jim

  • Connecting to Oracle 8i in Win 2000

    Hi All,
    When i try to connect forms6i with the DB[Oracle 8i] in Win 2000 I get an error stating TNS could not resolve service name. The error number is ORA-12154.
    Thanx
    null

    Hi "User", seems you have the same problem
    like all that do their first-time install :-)
    Forms uses a different Oracle_HOME (required by setup), and hence does not "see" the "settings" of the normal client.
    Try the following:
    - Set up a connection with NET80-Tools
    - Test with SQL*PLUS
    - Copy "tnsnames.ora" from the Client-81-Home
    to the forms-Home, e.g.
    cd ORACLE/FORMS/NET80/ADMIN
    copy ORACLE/ORA81/NETWORK/ADMIN/tnsnames.ora
    Of course, you'll have to check for YOUR
    directory names...this is just a samples, resp. mthe setup of a machiche I configured yesterday. HTH.
    /M.
    null

  • Oracle 9.2.0.3 or 9.2.0.4 on Win 2000

    In the OTN downloads page, I see that I can download the database for version 9.2.0.1 (Standard Edition), for Win 2000.
    I have been informed that the Developer Suite for 9i, with the 9.2.0.6.0 patch, is certified to run with database 9.2.0.3 or 9.2.0.4.
    My question: Is database 9.2.0.3 (or 9.2.0.4) also available as an OTN download? If so, how can I access it?
    Alternately: Does anyone have reliable information as to whether Developer Suite 9i (with patch 9.2.0.6.0) can also run against database 9.2.0.1? (All on Win 2000).
    I am stressing the patch 9.2.0.6.0 issue, as I am told that prior to this patch, there were problems with setting up the Repository (needed for working with Designer).
    Thanks in advance for any information on this.
    Eliram Braudo

    Nope. There is no Database 9.2.0.3 for Win 32-bit (cd-pack/full release).
    There is Database 9.2.0.1 (full release) and Patch Sets that brings it up to 9.2.0.3 (or .4 or .2). Patch Sets are, as I know, only available from Metalink with a valid support contract.
    Note that AS and DS are 9.*0*.2. (confusing, yeah!)
    Here on OTN we can find:
    Oracle9i Designer Release 9.0.2.6.0 - a full, patch release for Oracle9i Designer
    (You must install this over your Oracle9i DS installation)
    Note the difference - patchset is for Designer/Repository 9i as part of DS, not the whole DS product stack (latest patchset for Forms & Reports is 9.0.2.3 I think). Patching Oracle (except for DB) is messy as always I guess ;)
    I would guess that Oracle Support recommends to have DS patchset 9.0.2.2 installed also...
    And cert info includes a requirement for at least 9.2.0.3 (DB) so I guess you have smoe patching to look forward to ;-D
    Hth
    Fredrik

  • 8iLite on WIN/2000 -- navigator crash.

    Hi there,
    I installed Oracle 8iLite in a WIN/2000 laptop
    and tried to create a snapshot of a table hosted on our 8.1.7EE server running under Linux. I previously created a master group on the server containing the questionable table.
    Dragging and Dropping the table under the 8iLite Navigator from the server connection to the snapshot ssection of the 8i Database sresult in a rash of the navigator. Besides a
    dialog is shown telling me some errors, maybe from the server:
    REPAPI-26522: plsql r|c refresh context get failed
    REPAPI-26522: rpc execution failed
    ORA-06550: line1, column 10:
    PLS-00201: declarator 'SYS.DBMS_SNAP_REPAPI' must be declared
    ORA-06550: line1, column 10:
    PL/SQL: Statement ignored
    The last four lines are repeated...
    Any help appreciated....
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
    Hi there,
    I installed Oracle 8iLite in a WIN/2000 laptop
    and tried to create a snapshot of a table hosted on our 8.1.7EE server running under Linux. I previously created a master group on the server containing the questionable table.
    Dragging and Dropping the table under the 8iLite Navigator from the server connection to the snapshot ssection of the 8i Database sresult in a rash of the navigator. Besides a
    dialog is shown telling me some errors, maybe from the server:
    REPAPI-26522: plsql r|c refresh context get failed
    REPAPI-26522: rpc execution failed
    ORA-06550: line1, column 10:
    PLS-00201: declarator 'SYS.DBMS_SNAP_REPAPI' must be declared
    ORA-06550: line1, column 10:
    PL/SQL: Statement ignored
    The last four lines are repeated...
    Any help appreciated....<HR></BLOCKQUOTE>
    U need to set up propagator with the permission to execute those DBMS_REPxxxx packages.
    null

  • Plug-in under Win 2K

    I've read conflicting messages regarding the Java plug-in under Win 2K. Here is our situation:
    1) We currently use the 1.2.2 version of the plug-in. Everything works fine under Win NT.
    2) When installing the 1.2.2 plug-in under Win 2K (not logged in as an administrator, or with the proper privs), the plug-in would not install.
    3) When installing the 1.2.2 plug-in under Win 2K (logged in as an administrator), the plug-in installed successfully.
    Questions:
    1) Is this a known problem (to Sun) with the Java plug-in under Win 2K? If so, is there a solution other than upgrading to 1.3.x (if upgrading is indeed a solution)? We want to upgrade to 1.4 when it is ready.
    2) I'm guessing (I don't know anything about Win 2K) that "normal" users are not given authority to install the plug-in (or anything else) on their own machine? How do "normal" users install software?
    3) Is there a site (Microsoft or otherwise) that discusses Win 2K security/administrators?
    4) What other problems will I run into once I get the plug-in installed (as an administrator or otherwise) under Win 2K?
    I know this has been talked about on several other threads... just trying to get a clear answer.
    Thanks for any help you can provide.
    Van Williams

    "Normal Users" don't install software on NT/2000. You need to have rights to do so such as being a member of the Administrators group.
    After installation of the JRE/JDK from 1.2 to 1.3.1 I've not noticed any problems from Java or the plug-in.
    There is this one really peculiar thing that we have happen on all of our machines that we install Java onto, reguardless of the machine, and consequently run Java apps on:
    They work--no DLL Hell, and they keep on working after system updates, patches, and other application updates. Peculiar thing, but we love it!

  • Developer 6 on Win 2000

    Does anybody know a walk around to install Developer 6 on Win 2000? The installer always quits (without error messages) after it copies a few files.

    I was able to install developer on Windows 2000 without any problem. The only error was it said I will not be able to web enable my forms as the opearting system is not a NT technology.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by liuatORA:
    Does anybody know a walk around to install Developer 6 on Win 2000? The installer always quits (without error messages) after it copies a few files.<HR></BLOCKQUOTE>
    null

  • PCMCIA-GPIB for win 2000 running on cPCI bus via a cPCI PC Card Adapter

    We are trying to use a PCMCIA-GPIB for win 2000 running on cPCI bus via a cPCI PC Card Adapter. Our OS is WIN2K SP3 and we are running version 1.7 (latest) of the drivers. Unfortunately when using the "getting started" wizard and the "verify software and hardware installation" the system occasionally doesn't pass the third test. When it does, we try to scan for instruments using MAX Explorer to talk to a Agilent CW generator via GPIB but it cannot find the instrument. Doing the same thing on a laptop PC is successfully achieved. Any information on this matter would be greatly appreciated.

    Hi,
    Although it should be transparent to the PCMCIA card, I have also have had some problems with some adapters. Specifically, I have been able to install the card in a PCI-PCMCIA adapter form Qualtech, but not if I'm using a cPCI Cirrus Logig adapter. We haven't been able to find a cause for this.
    If you need a GPIB interface in a cPCI system, you might consider the PXI-GPIB. PXI fully compliant with the cPCI standard.
    DiegoF.

  • [GeForceFX] Issues with FX5700-VTD256 under Win XP

    Hello everybody,
    Will appreciate your help or advice on the above problems I am experiencing with the MSI FX5700-VTD256 VGA PCI Card
    I am using the following driver versions
    For VGA - NVIDIA VGA Driver 71.25 for Win XP/2000
    For Capture - NVIDIA Capture Driver (For FX series)
    Downloaded from http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=533&kind=2
    My configuration is AMD with 512 MB Ram under Win XP SP2
    VGA problem
    I am getting bad JPEG quality when browsing the web under either Internet Explorer or Mozilla Firefox, that is, picture under the JPEG format does display but with lots of artefacts, pixel soups around or in the pictures. What is causing this?
    Capture problem
    My capture card automatically set itself to NTSC colour standard each time I restart my PC, I can set this via Virtual each time. Are there any other settings which I can access to set it to PAL or SECAM permanently? If not, why this auto set up to NTSC?
    Thank you.
    Antony

    I will like to update my posting, the jpeg display problem seems to be from the internet accelerator utilities provided by my ISP which reduce the quality of JPEG for the acceleration of web site display. But I am not sure if this is the main reason, have to test from another ISP to be sure.

Maybe you are looking for