Forms and Czech special characters

Hello everybody,
I created a form to update calendar events. I used Czech language to made labels of inputs in the form. Czech special characters aren't display correctly. Others applications, pages and CAs are OK. Just I have problems with forms. The characters are replaced with senseless characters and if I save the form again, the sensless characters are added. So I have longer and longer strings there.
I found that the labels are saved in the table "WWA_FORM_ITEMS$". So I changed them directly in this table. But you know, it's annoying.
Does anybody knows if there is more comfortable solution?
I'm using Portal 3.0.8 and database 8.1.7.
Thanks for any answer. You can use also this address: [email protected]
Petra :)

again.
Hi Petra,
i've had the same problem with german characters. As far as I know it is a bug
(either in Portal or in Interner Explorer).
You can use Netscape to design your forms or (that's how I do it) use the
html equivalent for your letter. For example instead of "ä" (or d) use "& a u m l ;"
(without the blanks - I hope that this will be displayed correctly).
Regards Oliver

Similar Messages

Forms and Czech characterset

Hello everybody,
I created a form to update calendar events. I used Czech language to made labels of inputs in the form. Czech special characters aren't display correctly. Others applications, pages and CAs are OK. Just I have problems with forms. The characters are replaced with senseless characters and if I save the form again, the sensless characters are added. So I have longer and longer strings there.
I found that the labels are saved in the table "WWA_FORM_ITEMS$". So I changed them directly in this table. But you know, it's annoying.
Does anybody knows if there is more comfortable solution?
I'm using Portal 3.0.8 and database 8.1.7.
Thanks for any answer. You can use also this address: [email protected]
Petra :)

again.
Hi Petra,
i've had the same problem with german characters. As far as I know it is a bug
(either in Portal or in Interner Explorer).
You can use Netscape to design your forms or (that's how I do it) use the
html equivalent for your letter. For example instead of "ä" (or d) use "& a u m l ;"
(without the blanks - I hope that this will be displayed correctly).
Regards Oliver

10g won't recognize ellipsis and other special characters.

I'm trying to insert data into both VARCHAR2 and CLOB columns that contains characters such as ellipsis and other special characters. Oracle doesn't recognize the characters and just converts it to garbage. Is there a way to make Oracle easily recognize these characters?
For example, it won't recognize the following ellipsis in the string:
"Here we are … right now."

My bad...I did look at the national character set instead.
When I performed theq query you posted, I got the following:
NLS_CHARACTERSET
WE8MSWIN1252
NLS_NCHAR_CHARACTERSET
AL16UTF16
I hope this new information helps. Also, the tool involved is SQL *Plus, but I'm currently concentrated on getting the insert to work via JDBC. Thanks in advance.

I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 digit and 4 special characters. No combination of numberic, alphanumeric, special characters works. Help

I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 + digit and 4 special characters. No combination of numberic, alphanumeric, special characters is working. Help!!

I have set up my work Exchange email/calendar. After setting up I am getting passcode expired message and asking for changing the passcode with a 16 + digit and 4 special characters. No combination of numberic, alphanumeric, special characters is working. Help!!

Vbscript to rename files and replace special characters

Dear Exprt,
would you please help to add addtional requirement for rename and replace special characters for file
by the below script i can re name.
strAnswer = InputBox("Please enter folder location to rename files:", _
"File rename")
strfilenm = InputBox("Enter name:", _
"Rename Files")
Set FSO = CreateObject("Scripting.FileSystemObject")
Sub visitFolder(folderVar)
For Each fileToRename In folderVar.Files
fileToRename.Name = strfilenm & fileToRename.Name
Next
For Each folderToVisit In folderVar.SubFolders
visitFolder(folderToVisit)
Next
End Sub
If FSO.FolderExists(strAnswer) Then
visitFolder(FSO.getFolder(strAnswer))
End If
[email protected]

Thx would you please look below what wrong in its run nothing happend no error
strAnswer = InputBox("Please enter folder location to rename files:", _
"Test")
strfilenm = InputBox("Enter name:", _
"Rename Files")
Set FSO = CreateObject("Scripting.FileSystemObject")
Set regEx = New RegExp
'Your pattern here
Select Case tmpChar
Case "&"
changeTo = " and "
Case "/"
changeTo = "_"
Case Else
changeTo = " "
End Select
regEx.Pattern = tmpChar
Sub visitFolder(folderVar)
For Each fileToRename In folderVar.Files
fileToRename.Name = strfilenm & fileToRename.Name
fileToRename.Name = regEx.Replace(fileToRename.Name, tmpChar)
Next
For Each folderToVisit In folderVar.SubFolders
visitFolder(folderToVisit)
Next
End Sub
[email protected]

Capturing returns and other special characters

Greetings,
I'm curious to know what is 'normally' done to capture
returns and other special characters from textareas. I want my user
to be able to insert 'control' characters into the text area to
allow them to provide some structure to the information they're
entering. At the moment, I'm processing the text char by char and
working out if it's an 'enter' or whatever, then appending a
'<br />' to the string before I store it and so on.
Is there a more established way to do this sort of
thing?

Use the replace function to replace either chr(10) or chr(13)
with a break tag. It's using cold fusion functions to accomplish
the same thing you appear to be doing manually.

E72: Swedish and other special characters not work...

When I send mail through MfE, swedish and other special characters do not reach the recipient, they are just ignored. No blanks or nothing. Every word with a swedish character ends up one letter short.
Before the firmware upgrade this was intermittent, happening only on about half of my mails.
Now I upgraded yesterday, and it seems the problem is now permanent.
Have seen similar posts from E75 and E90 owners, their problems seem to have been fixed by newer firmware.
Our setup is: Exchange 2003, Portwise authentication.
All other phone models work fine, like iPhone, E71 etc.
/Sebastian

After some testing I found out that if I use swedish chars in the subject line, it works fine. Even in the mail body.
If I don't use swedish chars in the subject, they won't work in the body. I either get garbage or nothing where the swedish chars should be.
The problem doesn't exist at all in my private IMAP mail account.
Could someone who uses Mail for Exchange and have special chars in their alphabet (swedish, finnish, german, hungarian etc) pls tell me how it's working out for you?
Message Edited by Seb_Martin on 28-Jan-2010 11:15 AM

Adobe Interactive Forms ZCI with special characters

Hi,
I hope somebody can help me with the problem described below.
We are using Adobe Interactive Forms ZCI (IF). On our IF we placed a Enumerated DDL from the Webdynpro Native tab. In the Visual Admin the number of entries for the DDL is 50 (default). The problem is that when the DDL consists of more than 50 entries a webdynpro pop-up screen is shown. In our DDL we have entries with special characters for example the apostrophe (ie. s). When I select one of these entries its not displayed correctly in the form. It is displayed as 's.
We are using Adobe reader 7.08. I also tested it with reader 8.1.0 and there the problem still occurs.
We are using NW04s SP12.
Thanks in advance,
Kind regards,
Maarten.

Hello Saujanya,
This is not what i meant.
The problem isn't that not all entries are listed in the EVS, but that when the EVS is displayed and i select an entry with a "special" character like i.e.. a apostrophe (') the selected value isn't correctly displayed in the DDL as selected item. Say the i select from the EVS the value " 's " when the EVS is gone the value in the DDL is 's. This is not correct.
Hope this explanation will help.
Kind regards,
Maarten.

Dynamic Images in PDF and Escaping Special Characters

I used the following to create my own PDFs with dymnamic images:
http://marcsewtz.blogspot.com/2012_02_01_archive.html (Dynamic Images in PDF - What 32k Limit? )
I have installed this application on Oracle's free workspace to test.
The issue I am having is that when there is a special character in the description, such as <>'"& then the the PDF will not open. I have tried using the dmbs_xmlgen.convert to convert the description but haven't had any luck.
I'm a complete novice with xml. Any help with this is greatly appreciated.
Thanks,
Glen

I have been able to find a solution, but it's not completely perfect. I have changed the "description" field as follows:
XMLCdata(replace(description,''&'',''and'')) description,
The characters greater than (>), less than (<), single qoute('), and double quote (") can now all be in the description and will not cause errors. For some reason, I couldn't get the & not to give an error no matter what I tried, so I just replaced the & with the word "and". This solution will work for my needs, but it would be nice to be able to get the & to display.
Does anyone know of a way to get the & to display correctly?
Thanks again,
Glen
The complete code I am using is below:
declare
l_print_layout clob;
l_xml_data clob;
begin
-- load print layout from database
for c1 in (
select layout from eba_pdfimg_layouts where id = :P1_LAYOUT
) loop
l_print_layout := wwv_flow_utilities.blob_to_clob(c1.layout );
end loop;
-- generate XML data
for c2 in (
select dbms_xmlgen.getxml('
select
id,
file_name,
mime_type,
XMLCdata(replace(description,''&'',''and'')) description,
-- description,
blob2clobase64(image,''Y'') image
from eba_pdfimg_images
') xml_data from dual
) loop
l_xml_data := c2.xml_data;
end loop;
-- download print document
wwv_flow.g_page_text_generated := true;
apex_util.download_print_document (
p_file_name => 'image_demo',
p_content_disposition => 'ATTACHMENT',
p_report_data => l_xml_data ,
p_report_layout => l_print_layout,
p_report_layout_type => 'rtf',
p_document_format => :P1_FORMAT
end;

Reading and writing Special Characters to Oracle DB

Hi All,
I need to insert data from CSV to Oracle DB and then use the same data for creating XML file in UTF-8 format.
I have few fields in the CSV file which has � and � special characters. I'm able to read � and write in UTF-8 , but the same procedure is resulting in some other ascii character for �.
While reading data from CSV file :
Reader l_fileReader = new InputStreamReader(p_in,"ISO-8859-1");
Can anyone help me.
Thanks,
Ramki.

Does anyone has some pointers or clues?

Storing carriage return and other special characters in a TestStand variable and passing to LabVIEW

I am using TestStand step to call a LabVIEW VI that writes commands to a serial device. The device expects a carriage return at the end of the command. I can create a constant string in TestStand with the carriage return, e.g., "ATA\x0D" and pass that to a LabVIEW string control which shows ATA\r and the VI works properly.
To provide consistency and flexibility in my code, I want to store the terminator character(s) in a TestStand variable. However, when I try to use an expression to create the command string, i.e. "ATA" + "Locals.Terminator", where Locals.Terminator is set to "\x0D", my LabVIEW VI string control shows "ATA\\x0D" which doesn't work. And when I try Locals.Terminator set to "\r", the LabVIEW string control shows "ATA\\r" which doesn't work either.
Is there a way to store special characters in a TestStand variable and pass them to LabVIEW as special characters? I saw in another post that if you edit the TestStand variable by pressing Cntl-Enter, it will store the newline \n properly and it can be sent to LabVIEW - that works for me as well for \n. But I need to send a carriage return.
I've attached my test sequence and the corresponding LabVIEW VI with a string control.
Hans
Attachments:
Special Chars.seq ‏27 KB
String Passing.vi ‏13 KB

Hi Hans,
Thanks for your detailed explanation and examples. In TestStand, change the String parameter's String Type to Binary String instead of ASCII. Then it will pass the desired value.
Cheers,
David Goldberg
National Instruments
Software R&D

How to define and use special characters

I need to define some special characters (such as an up-arrow and a down-arrow). I need to add these characters to Strings along with "normal" ASCII characters, and finally display the Strings with graphics.drawString().
Can anyone get me started or tell me where to look? I looked at the archive but apparently I'm not using the correct keywords.
Thanks in advance, Rick

public void paint(Graphics g) {
        super.paint(g);
        g.drawString("up arrow: \u2191 down arrow: \u2193", 100, 100);
    }Works for me.
See www.unicode.org for code charts.

Identify and show Special Characters in the SQL result set

Hi all,
The values in a column (SC - colunm name) has special characters. For eg. 496+>9, 223'32, 167&45. Is there any function in Oracle that would give me the below result when i query that colum.
select SC from xyz;
Result should be as follows:
496+>9
223'32
167&45
Thanks in advance.

yes it will have numbers and characters also along with the special characters
The results from my previous post was wrong. Here is the expected results;
496+>9
223'32
167&45
can you give me the exact query to get the above resultant.
Thank you

HT1146 Just started using Apple mail. Trying to set up email folders with Company/Company P.O. and it won't work. Went to Edit and added special characters and it still won't work. What am I doing wrong or can this not be done.

Just started using apple mail. Trying to set up email folders with example: Company/Company P.O. It won't let me do it. It will not allow / or . . What am I doing wrong or can this not be done. I tried to use the Edit menu and adding the special characters, but it still won't work. Please advise. mmather

Find and replacing special characters

we have just discovered that after database unicode conversion, some special characters are starting to appear in the database after users copy and paste into the database.
For example from a table, we can identify it with:
SQL> select count(*) from table where column_name like '%' || chr(25) || '%';
COUNT(*)
15
This is for a table.
How can this be done to identify the characters for all tables because we are not sure of all the tables
Thanks

Hi,
Please try below pl/sql block to identify special characters in tables with respect to columns
set serveroutput on size 1000000
declare
procedure gooey(v_table varchar2, v_column varchar2) is
type t_id is table of number;
type t_dump is table of varchar2(20000);
type t_data is table of varchar2(20000);
l_id t_id;
l_data t_data;
l_dump t_dump;
cursor a is
select distinct column_name
from dba_tab_columns
where table_name = v_table
and data_type = 'VARCHAR2'
and column_name not in ('CUSTOMER_KEY','ADDRESS_KEY');
begin
for x in a loop
l_id := null;
l_data := null;
l_dump := null;
execute immediate 'SELECT ' || v_column || ', ' || x.column_name || ', ' ||
'dump(' || x.column_name || ')'
|| ' FROM ' || v_table
|| ' WHERE RTRIM((LTRIM(REPLACE(TRANSLATE(' || x.column_name ||
',''ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789@#$%^&*()_+
-=,!\`~{}./?:";''''[ ]'',''A''), ''A'', '''')))) IS NOT NULL'
bulk collect into l_id, l_data, l_dump;
if l_id is not null then
for k in 1..l_id.count loop
dbms_output.put_line(v_table || ' - ' || x.column_name || ' - ' ||
to_char(l_id(k),'999999999999'));
dbms_output.put_line(l_data(k));
dbms_output.put_line(l_dump(k));
dbms_output.put_line('*********************');
end loop;
end if;
end loop;
end gooey;
begin
gooey('table1','coln1');
gooey('table1','coln2');
gooey('table2','coln3');
end;
Like this you can get special characters for all the columns/particular column from table
Thanks,
Nitin

Forms and Czech special characters

Similar Messages

Maybe you are looking for