Forms and WebCache
Hi
Does WebCache using load balancing works with N middle tiers with forms?. How does the webcache know that a particular session is tied to a specific server?.
Regards,
Néstor Boscán
Hi,
It does this by the JSession ID, which doesn't change for the Forms session. A metalink note exist that explains it more in detail (metalink.oracle.com)
Frank
Similar Messages
-
Running Forms Https (forms 10g with A/S and webcache)
I'm trying to implement Credit Card processing for applications in our agency. The environment is in the subject. There will be two types of applications that need to process credit cards:
1. Users coming in through our external website running java applications.
2. Internal users running Oracle Forms (against another App Svr deployment)
I'll be using a payment gateway accessible via a web service to authorize the card. I can talk to this via a java w/s client proxy w/o a problem. Here's the problem though:
I've been told that when forms are running https, ALL forms running on the application server, regardless of application will now be running https. I'd like the Credit Card entry Oracle Form to be running https, but don't see how this affects all the other forms in our environment (hundreds of them). Can't one screen (http) call a CC screen (this one only running https), and they can enter the card into that? From the reading I've done this should be possible.
I'm not the Application Server admin. This is what I've been told, and I cannot configure the environment. I've been told that Forms will now have to call a JSP CC entry screen that I write and that screen would now invoke the web service. Of course, my concern is that the oracle form and the jsp screen are now asynchronous, and one won't be able to tell when the other is done (unless I poll on the form, or go the route of PJCs and javascript - I've seen an article for this already --- HOWEVER, this was shot down as well.)
My question boils down to:
1. Can I run all my other forms http, and then this CC screen https (via a web.show_document), and then it can hit the web service directly via a java imported client proxy rather than me writing extra methods, and another screen/conf page that's specific to forms users?
[I need to run forms https since the default 40-bit encryption is not enough.]
Here are my related questions/threads to this one:
Forms Client Side Encryption and invoking external Secure Service via URL
Forms Client Side Encryption and invoking external Secure Service via URL
encrypting creditcard for "in-transit"
encrypting creditcard for "in-transit"
loadjava sunrsasign.jar
loadjava sunrsasign.jar
As always, help is very much appreciated, and a very big thannks for any answers/suggestions.
EricEric,
You may want to ask your question in the App Server forum. -
Clustering of Oracle 10gAS (Forms and Reports Standalone edition)
Hi,
Does anyone have experience of clustering of Forms\Reports in 10g environement with Forms and Reports Standalone edition?
Clustering at Application Server level?
Clustering at hardware level (load balancing \SAN for code storage)?
Clustering at OS level (MS Clustering)?
I am interested to know about others experiences\thoughts.
JohnSince 10g Version (904) you can only cluster the infra (Cold Failover Cluster and Active Failover Cluster), the HA for Forms and Reports is only by frontending with a Loadbalancer, and I'll sugesst not to use WebCache as this frontend because forms get a lot of problems.
Regards. -
Help me install oracle form and report 9.0.4 on red hat AS 4 x86
i installed oracle database 10.0.2 on my red hat AS 4 x86 in /u01/app/oracle/product/10.0.2/db_1. Now i want to install oracle form and report 9.0.4 on my computer in /u02/app/oracle/product/9.0.4
The oracle installer checks for required packages. It will produce the following list of missing packeges:
Package gcc-3.2.3-20 is missing
Package compat-gcc-7.3-2.96.122 is missing
Package compat-gcc-c++-7.3-2.96.122 is missing
Package compat-libstdc++-7.3-2.96.122 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package setarch-1.3-1 is missing
Package sysstat-4.0.7 is missing
Package gnome-libs-1.4.1.2.90-34.1 is missing
Package libstdc++-3.2.3 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package compat-glibc-7.x-2.2.4.32.5 is missingbut i installed newer versions of them. so can i continue to install without missing packeges??? and how to install missing packages because they conflict with packages i installed.
i tried to continue installation without missing packages and have some errors:
"Error in invoking target 'agent' of makefile /u02/app/oracle/product/9.0.4/sysman/lib/ins_sysman.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/sqlplus/lib/ins_sqlplus.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/plsql/lib/ins_plsql.mk"
Error in invoking target 'relink' of makefile /u02/app/oracle/product/9.0.4/precomp/lib/ins_precomp.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/webcache/lib/ins_calypso.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/network/lib/ins_net_client.mk"
Error in invoking target 'webm-install'(or genm-install or gen-install) of makefile /u02/app/oracle/product/9.0.4/forms90/lib/ins_forms.mk"
Error in invoking target 'proxy install' (runm-install,server-install,cgi-install,cli-install,conv-install,qv-install) of makefile /u02/app/oracle/product/9.0.4/reports/lib/ins_reports.mk"
and error in Configuration Assistants:
"output generated from coniguration assistant "oracle net configuration assistant":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/jre: relocation error
":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/libjava.so: symbol_ _libc_wait, version Glibc -2.0 not defined in file libc.so.6 with link time refrence
Someone help me!!!
Thanks.The requirements for installing 10.2.0 and 9.0.4 on RHEL4 differ - 9.0.4 is based on older versioned RSFs and require linking against older compatibility libraries.
The OUI may incorrectly complain if later versions of the required/pre-requisite packages really are installed - this should not be a problem functionally, however.
The latter errors you report, however (make, relocation error, glibc/symbol), are symptomatic of trying to link with/against incompatible gcc/glibc versions. Try installing the following additional compatibility files (appropriate for your architecture);
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-oracle-rhel4-1.0-5.i386.rpm
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-libcwait-2.1-1.i386.rpm
If you have not already done so, I suggest you create and use (i.e. source) separate environment definition files when working with each product/version environment. For 9.0.4, ensure that you specify environment variable LD_ASSUME_KERNEL=2.4.19 before installing 9.0.4 (or relinking).
If you have MetaLink access, refer also to Note.315832.1, Note.389811.1.
Message was edited by:
mychan -
Weblogic 12c, is it possible to migrate Oracle forms and reports (legacy)
Hi Guys
Is it possible to host Oracle forms & reports based application using Weblogic Server 12c? The documentations do not exclusively confirm the same, other than the ability to use applications in cloud. We are planning to move to web, as we are running into multiple issues with client/server (6i) applications on both Windows 7/8 OS
regards,
rajHi Raj,
These are the steps I did for our OAS upgrade in an xterm session :
Installed weblogic 10.3.4 software (replace this with 10.3.[5/6]) (do not create domain,, just install the software) remember to user OFA for your pathing, it will help if you start using more middleware products /u01/oracle/Middleware for example would be the middleware home with wlserver_10.3 beneath that
Install install forms & reports again software only (if you go down the PFRD route, you have to install the 11.1.1.2.0 install and then patch to 11.1.1.4.0 and patch again to 11.1.1.6.0 (install takes 80 minutes, each patch about 50 minutes) for the install you choose all software
setup you environment have your jave home set (use jdk 1.6.0 u24 - 33 ) you might get issues trying to use java 7 (thats a seperate upgrade process)
cd $ORACLE_HOME/bin (this would be /u01/oracle/Middleware/<install of binaries path>/bin)
./config.sh &
choose your domain name wisely the default is classic_domain, I changed ours to FormsReports (what ever you chose will appear in your file path and process paths)
admin user and passowrd etc..
for the software config select all and un-select the discoverer and portal option leave everything else (we do deployed realtime compilation from source controlled libaries so we have installed the compilers also)
the config.sh once your get to the configure summary, will create your node manager, weblogic domain, AdminServer, WLS_FORMS and WLS_REPORTS managed servers, once the configure completes and exits you'll be able to http://localhost:7001/console
You'll need the below info to restart the JVM's the installers starts each jvm by the scripts located below (with no nodemanager setup)
your .profile settings will need the PATHS for $ORACLE_HOME/bin, $JAVA_HOME/bin setting as well asn your /usr bin settings, LD_LIBRARY_PATH will need $ORACLE_HOME/lib, $JAVA_HOME/lib
also create aliases for your domain home $domain_dir = /u01/oracle/Middleware/user_projects/domains/classic_domain under the bin directory will be the startweblogic script and start manageded servers scripts (manual) i'll leave the fun of automation up for you :) there are enough blogs and 3 different ways of doing it, the node manager startup script is in $WLS_HOME/server/bin
to configure your forms.cfg, httpd.conf etc you will find all those in
$mwHOME/instance/config (or whatever you had your instance path set to), the forms.cfg and default.env files are DEEP down the root 7 or 8 sub directories down so make a symlink once you locate it) you can reuse most of your default.env and forms.cfg settings form your 6i install
and good luck
the above is pretty much what i did if you want step by step guides again there are enough blogs you can google to cover installing, configuring, autostartup(node manager setup)
Remember to Patch the bsu (BEA Smart Update with version 3.30 so you can apply CPU weblogic patches, theres one for JAN 2013 for 11.1.1.6.0) weblogic does not use OPatch regardless of what the readme file says :)
Edit: Almost forgot your opmn services, in your profile set ORACLE_INSTANCE=$mwHOME/instance (/u01/oracle/Middleware/instance) then you can run opmnctl (add $ORACLE_HOME/opmn/bin to path)
opmnctl status
Processes in Instance: PFRD_Inst
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
emagent_PFRD_Inst | EMAGENT | 29078 | Alive
RptSvr_hostname_PFRD_Inst | ReportsServerComp~ | 29075 | Alive
webcache1 | WebCache-admin | 29073 | Alive
webcache1 | WebCache | 29074 | Alive
ohs1 | OHS | 29072 | Alive
remember your opmn services look after the apache server and webcache if these aren't running you r will get forms/reports errors, like backend bridge failure if ohs is down, or nothing displayed 404 errors if webcache is down
Mark
Edited by: 992409 on 02-Apr-2013 09:44 -
My computer went crazy yesterday on two occasions involving PDF documents. One dealt with attachments to an email from a bona fide corporation. The other dealt with IRS PDF forms & schedules needed for today's submission.
As both dealt with PDF and had nothing else in common, I suspected my PC had a virus. When I asked a local store technician, he agreed. I turned to Norton, which protects my PC from viruses, and after a few hours of really thorough searching, the computer was found to have no viruses.
Before describing what I call "crazy" computer behavior, you need to know that I have long had IE8 as my default browser but a few weeks ago switched to Mozilla Firefox because IE8 had beome incompatible with some websites from which I get information.
When I received the email from AT&T email service and clicked the first of four icons representing attachments, there was figuratively an explosion on my monitor: a series of new tabs, each called New Tab, burst onto the monitor--but no text or picture. The new tabs appeared faster than I coul kill them. I finally decided just to shut down the computer, hoping they would not reappear when I restarted. I was wrong. After 2 repeats, I decided to forget about the attachments and asked the sender to send them to me by regular mail.
That was no solution for my IRS PDFs. I wanted to complete filling in the various forms and schedules that I had begun months ago so that I could mail them today to the IRS (without having to copy them all in ink). When I tried to open the first one, BOOM. The same thing happened: the blizzard of New Tabs atop blank pages; my IRS form or schedule did not show up. Did the same shutdown/restart routine with the same results.
When I looked at the list of current forms that had to be completed, I noticed something very strange: the icons that began the listing of the documents' names were replaced one by one by Mozilla icons. When I moused over them, they said Firefox HTML. Why?
Starting the day today, I had the same experience. What's more, when I started to retrieve 2012 IRS PDFs from a year ago, the same New Tab tabs appeared and had to be killed, and Mozilla icons replaced whatever icon was there before.
Assuming that the problem arose with Adobe Reader's reading of the PDFs, I contacted Adobe but got no helpful phone number because PDFs are a free service and was directed to use this Forum to get help.
What do I have to do to (a) read and use PDFs in the normal way and (b) remove the Mozilla icon from those that have appeared on icon documents. If Mozilla is the source of the problem, shall I go back to IE8? (In my 80s, I want eventually to replace my old computer but for the time being I must continue using it. It will not take an IE9. Anther possible default browser would be Google Chrome, but I have unfavorable impressions of it because of its intrusiveness, loading my PC with stuff I do not need.
Can you help?The problem is absolutely not Reader. The problem is that FireFox has stepped in front of Reader and handles all the PDF stuff - wrongly in your case. FireFox is DESIGNED to take over PDF files. But it is not capable of doing IRS forms!
To start with go back to IE for these forms. When you save them to disk DO NOT DOUBLE CLICK ON THEM until this is fixed. Just open the in the normal way - start Adobe Reader and use Open from the File menu. -
How to Install the Forms and Reports 6i in Ubuntu 6.06 LTS
Dear All,
I need to install Forms and Reports 6i in Ubuntu 6.06 LTS.
I had downloaded the d2k6irelease2.tar also and extracted the tar file.
I don't know how to start up with the installation further., Is there any document available for the installation process inubuntu.. or what are the steps that i need to follow to make it work..?
Many thanks in advance...Hi,
Here's the Forms and Reports Services Deployment Guide for OAS 10g 10.1.2:
http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
You will need to modify your default.env to point to the directory where your .fmx is located and formsweb.cfg to run the specific form, e.g. foo.fmx (default is test.fmx).
HTH,
Jim -
Get cell value in Planning Data form and using it in a business rule
Hi Everybody,
if i set the data type of an Account Member as text, is there a way to get the value inserted by the user in a dataform, turning it as dimensional member and using it in a business rule?
So, if the user insert the value "USA" in a cell, can i use any functions to tell essbase that "USA" is a dimensional member and then using it in a business rule, for example in a cross-dimension like Period1->FY12->USA?
I tried to use the function @Member and it doesn't work, but i'm wondering if there is a way that can let me get the value inserted and use it just like a dimensional member. What are the ways that can let user input value that can be used in a business rule? I think one is by using SmartList, is there any other ways? Maybe using variables?? As an alternative i tried to use Prompt Variable but there are too many members on which the rule must run.
Please help me, i wanna know if i can or not let the user input the member on which the rule must run...
Thank all guys
Bye
MaurizioThanks EW for your answer,
YesI could use SmartList even if i think it's very tough to handle. My experience on using SmartList in caclc script is not so good. I try to enter in details of my requirement:
I have 500 account members.
For each one, I have to calculate the monthly budget by sharing the amount among the months. The user wants to calculate it on the basis of the actual flow(over the months) of an unspecified account of the prior year. The unspecified account must be inserted in a data form.
So, i could use a Smart List but it colud be of 500 elements and then i should make a rule with as many IF as how many are the accounts. Or im wrong? The only way to use smart list dynamically in a business rule is by referring its values in a IF condition. Or i'm wrong.
I tried to use execution variable ma it seems don't work. In this case the user must pay attention to write the account correctly, otherwise as you say the rule doesn't work.
The value in PD0A020 is "PD0A000" (that is a dimensional member). The value in PD0A000 is "hello". In PD0A040 the rule returns "PD0A000" and not "hello" as i would. The function @Member appears to be not able to catch the dimensional member by the value in PD0A000.
{Example}="test"->"Input"->"Scenario_test"->"FY12"->"PD0A020";
Fix("test1","Input","Scenario_test","FY12")
"PD0A040"=@Member({Example});
endfix
So, my doubt is: is it possible for Essbase/Planning to use the value inserted in a data form and to turn it in a dimensional member? What are the practicable ways to let the user input/choose the member on which makes the rule run?
Thank you Ew, thank you guys
Maurizio -
What is the diff b\w open form and start form in scripts.
Hi,
can any one tell me what is the diff andb\w open form and start form in scripts.when we should use open form and when start form.Hi Friend.
I have understood some usefull information and would like to share with you.
Within one transaction, you can open and close several layout sets using OPEN_FORM and
CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control
whether the output is stored in the same print request. But also the SAP spool decides,
depending on several plausibility checks, whether new output is appended to an existing
print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but
several layout sets for different customers. To have the output for each customer begin with
the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the
layout set again. Within one print request, first call the function module END_FORM. It
executes the final processing for the current layout set. Then start the layout set again
using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
Hope your obstacle is cleared.
If not do ask me again? -
Can we use Perform statement in start routine ,Form and endform.
Hi,
Can we use Perform statement in start routine ? Then write the ABAP code between Form and Endform.
Example : Can I use Perform ABC in start routine. Then define ABC at the end of start routine.
Form ABC,
......<ABAP> code .....
Endform.Hi,
In BI 7.0 we have start routines defined using Class where you might be able to create your own performs, but in case of BW3.5 Start routines are defined using Form so there I don't think it will allow you to create one more form.
But you can surely try both the approaches.
Reards,
Durgesh. -
Migration of forms and reports developed using Headstart VERSION 3.4.1
Hi,
We have developed an application in forms 4.5 reports 2.0 based on repository 1.3.2 and Headstart
Designer/2000 Template Package VERSION 3.4.1
Now we want to migrate to Oracle 9i(web enabled)
1)Is it possible to migrate only the forms and reports in 4,5 to 9i without the designer repository?Can the repository be left out?
2)What about the templates and packages on the 2000 Headstart version.Is it necessary to migrate the same to 9i also?
2)In case the repository has also to be migrated how do i go about migration to 9i??
4)In case the headstart template/packages to be migrated how do i migrate to 9i?
5)Where is the documentation available for headstart?
Kindly help..Hi 23768 ( ;-) ),
There is a whole wealth on information regarding upgrade/migration of headstart generated application systems.
What you need is a licence on iDevelopment Accellerators and the Supplement Option (cso.oracle.com) to download this material.
Contact your Oracle Consulting representative if you would like to know how to do this.
Best regards, Marc Vahsen
Headstart Team
Oracle Consulting Netherlands -
Oracle Forms and Reports Installation - Creating domain failed
I installed the weblogic 10.3.6 (Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package Installer) in my Microsoft Windows(32-bit JVM) system first.
But there was an error occorred when the package of forms and reports (Oracle Forms and Reports 11gR2 (11.1.2.2.0)) was installing.
Please find the following error message for your reference.
Do you have any idea? Please kindly advise.
Thanks a lot!
2014-04-02 14:11:14,099 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:16,185 INFO [main] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
2014-04-02 14:11:17,556 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:18,205 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option ServerStartMode to "prod"
2014-04-02 14:11:18,477 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option ServerStartMode to "prod"
2014-04-02 14:11:18,490 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,604 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
2014-04-02 14:11:18,612 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find Server "AdminServer" as obj1
2014-04-02 14:11:18,652 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find Server "AdminServer" as obj1
2014-04-02 14:11:18,698 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,705 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
2014-04-02 14:11:18,706 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute ListenPort to "7002"
2014-04-02 14:11:18,716 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,724 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Server!SSL "AdminServer!AdminServer" as obj2
2014-04-02 14:11:18,735 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj2 attribute HostnameVerificationIgnored to "true"
2014-04-02 14:11:18,739 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find User "weblogic" as obj3
2014-04-02 14:11:18,755 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - delete obj3
2014-04-02 14:11:18,763 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: delete obj3
2014-04-02 14:11:18,764 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - create User "weblogic" as obj4
2014-04-02 14:11:18,768 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create User "weblogic" as obj4
2014-04-02 14:11:18,771 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute PeriodLength to "200000"
2014-04-02 14:11:18,807 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdlePeriodsUntilTimeout to "20"
2014-04-02 14:11:18,815 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,821 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
2014-04-02 14:11:18,822 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,830 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdleConnectionTimeout to "1000"
2014-04-02 14:11:18,833 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj4 attribute Password to "********"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option OverwriteDomain to "true"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,837 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
2014-04-02 14:11:18,948 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,953 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: validateConfig "KeyStorePasswords"
2014-04-02 14:11:18,954 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
2014-04-02 14:11:19,441 INFO [main] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2014-04-02 14:11:21,609 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd link=Start Admin Server for Weblogic Server Domain
2014-04-02 14:11:21,659 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd link=Stop Admin Server
2014-04-02 14:11:21,667 INFO [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Windows\system32\rundll32.exe link=Admin Server Console
2014-04-02 14:11:21,759 INFO [Thread-1] com.oracle.cie.domain.DomainRegistryWrapper - need to initialize domainRegistrydocument object
2014-04-02 14:11:21,777 INFO [Thread-1] com.oracle.cie.domain.DomainGenerator - Domain Generation Successful!
2014-04-02 14:11:21,783 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-04-02 14:11:21,784 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
2014-04-02 14:11:21,967 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,011 WARN [main] com.oracle.cie.domain.template.dependency.TemplateSelectionTarget - Catalog does not have matching template for location C:\Users\GZ\AppData\Local\Temp\tmp1396419069239wls.jar
2014-04-02 14:11:22,071 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,100 INFO [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology - Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
2014-04-02 14:11:22,101 INFO [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
com.oracle.cie.domain.ConfigGroupsException: Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
at com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology.merge(ConfigGroupsEngine.java:2762)
at com.oracle.cie.domain.ConfigGroupsEngine.mergeTopology(ConfigGroupsEngine.java:551)
at com.oracle.cie.domain.ConfigGroupsEngine.merge(ConfigGroupsEngine.java:479)
at com.oracle.cie.domain.AbstractTemplate.addConfigGroups(AbstractTemplate.java:314)
at com.oracle.cie.domain.script.ScriptExecutor.addTemplate(ScriptExecutor.java:605)
at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:416)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.addTemplate$20(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py:89)
at org.python.pycode._pyx3.call_function(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py:42)
at org.python.pycode._pyx15.call_function(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)hi user ...
on windows there are some steps in front of installation and configuration.
1) cleare the Windows Env (Path .. Programme x86 )
no Blank in Path and so on
2) insert into your local host file your server and IP Adress
3) in Windows 32 setup of WLS is JDK included so you don't have to install the jdk in front of WLS
4) verify if you are using the right installation medium (jdk 32 bit, wls 32 bit , fmw 32 bit
in your OraInventory/logs directory is a *.out file for your installation please can you put this file in the forum
is there a nodemanager up and running (if so please stop)
Jan-Peter -
Migration MS ACCESS FORMS and Reports to Oracle (Java or Forms or Reports)
Hello ,
can someone tell me, how i can migrate a whole MS ACCESS 2000 mdb (with forms and Reports) to Oracle.
I think i have first migrate the Access DB with the OMWB to Oracle and in the next Step to convert the VBA Code to JAVA or Forms9i.
BUT Is there a tool available for Migrating VBA code like the OMWB ????I don't know if this is an obvious question, but do you have MS Access 2k installed on the machine you are trying to run this from? I'm assuming yes.
If you do and there is still a problem, you should log a ticket for support who will take your mdb and help out with the issue for you.
Many thanks
Barry -
Question regarding material for Forms and Reports
Hi, I'm good at SQL, now that i would like to learn Forms and Reports in Database. But i dont know like where to start and how to start. Could someone please help me out like what i need to do to learn them. As i said i'm very much new to these concepts.
Thanks in advanceHello,
if buying abook is an option for you and you are speaking german I would advise you to get
Perry Pakull, Stefan Jüssen, Walter H. Müller:
"Praktische Anwendungsentwicklung mit Oracle Forms", HANSER Verlag ISBN-10: 3-446-41098-8. Have a look at
[http://www.hanser.de/buch.asp?isbn=978-3-446-41098-5&area=Computer|http://www.hanser.de/buch.asp?isbn=978-3-446-41098-5&area=Computer]
Regards
Mario -
How to receive parameters from a form and insert values in db using servlet
Hi friends,
My first question here.
I'm trying to create a Servlet that takes input from a form and process it and insert it in database.tablename.
My MAIN ISSUE IS WITH THE NUMBER OF COLUMNS THAT WOULD BE DYNAMIC AND THUS CANT RECEIVE THE PARAMETERS IN STATIC CODE.
Here is the form code
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE html>
<form action="Test" method="post" />
<table width="90%" border="1" cellspacing="1" cellpadding="1">
<tr>
<th scope="col">Student Name</th>
<th scope="col">RollNo</th>
<th scope="col">Java</th>
<th scope="col">J2ee</th>
</tr>
<tr>
<td><input type="text" name="studentname" /></td>
<td><input type="text" name="rollno" /></td>
<td><input type="text" name="java" /></td>
<td><input type="text" name="j2ee" /></td>
</tr>
<tr>
<td><input type="text" name="studentname" /></td>
<td><input type="text" name="rollno" /></td>
<td><input type="text" name="java" /></td>
<td><input type="text" name="j2ee" /></td>
</tr>
<tr>
<td><input type="text" name="studentname" /></td>
<td><input type="text" name="rollno" /></td>
<td><input type="text" name="java" /></td>
<td><input type="text" name="j2ee" /></td>
</tr>
</table>
<input type ="submit" value="insert values in the database now"/>
</form>
</html>
And here is the Servlet
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
import java.io.*;
public class Test extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
String title = "Module: Process Result Values from previous page";
out.println("<html>\n" +
"<head><title>" + title + "</title></head>\n" +
"<body>");
try
Class.forName("com.mysql.jdbc.Driver");
Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/","root", "root");
Statement s = con.createStatement();
ResultSet res = s.executeQuery("SELECT * FROM dbname.tablename");
ResultSetMetaData rmeta=res.getMetaData();
int noofcolumns=rmeta.getColumnCount();
if(!con.isClosed())
catch(Exception e)
System.out.println("Exception"+e);
out.println(e);
if(connectionFlag==1)
out.println("</body></html>");
doGet(request, response);
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
This is the basic code structure and I'm trying to figure out this special case with handling the multiple parameters:
1. I dont' want to use String []a=request.getParameterValues("studentname"); as hard code. The reason being the number of rows will be diyamic and I would like to get the column name and then then use an array of string to take values. But how can I connect these to form a query so that the rows goes on inserted one after other.
Thanks,
MashallThank you for your help.
I'm something close to it but this segment of code throws a NullPointerException Error. I counted number of rows and columns using the methods getColumnCount() and getColumnName(i).
ResultSetMetaData md = res.getMetaData(); //Get meta data for the resultset
int noofcolumns=md.getColumnCount();
out.println("<br />Number of columns in table (including name and roll number) :::: "+noofcolumns+"<br />");
for(int i=1;i<=noofcolumns;i++) // access column 1....n
String columnname = md.getColumnName(i); // get name of column 1....n
out.println("<br />Current column name ::: "+columnname+"<br />"); //check if the name appear correct.
String []columndata = request.getParameterValues(columnname); //Get raw value in array
for(int j=1;j<=rows;j++) // here rows is number of rows in each column
out.println("To be inserted: <b>"+columndata[j]+"</b> in Row ::: "+j+"<br />");
//The line above thows null pointer exception.
}
Maybe you are looking for
-
The speaker on my ipod touch is not working
Hi I have an ipod touch which is a year old. The speaker element is not working. I can still listen to music on the headphone facility, but any noises or alerts the ipod made cannot be heard through the speaker. Any suggestions greatly appreciated
-
How to disable the selection screen element?
Hello Colleague, I have a report which has a checkbox in the selection screen. Currently I need to create two transaction codes for the report. When Tcode1 is executed, the program will execute in normal way. When Tcode2 is executed, the checkbox sho
-
My photo albums are no longer alphabetical after ios5 update
I upgraded my Ipad 2 & ipod touch 4g to ios 5. My photo albums which sync to photoshop elements are no longer alphabetical which now makes it a pain to locate photos. What can I do?
-
Using a Mac, OSX 10.6.8; My internet connection is working properly, I can reach all sites via browser, yet I get the following message in iTunes: "iTunes could not connect to the iTunes store. An unkown error occurred (-54)."
-
Having trouble with a file with that includes CID or Identity-H encoding fonts
I am not able to use the cntrl find feature on one of my pdf files becasue the fonts are CID or Identity-h encode. Can you please tell me how I can change the font or the files so I can use the Cntrl Find feature.