Forms install: 90201iDS_Win32.exe is not a vaild Windows NT application.

I am trying to install Forms for evaluation (on Windows NT). I followed the instructions on http://otn.oracle.com/software/products/ids/htdocs/formssoft.html but after Step 3 got an error
dialog: "90201iDS_Win32.exe is not a vaild Windows NT application".
Does anyone have a suggestion of what I could try to get a correct install?
Thanks very much
Graeme Cavan

Are you waiting until the entire batch process has completed before running setup.exe? There should be a success message after running the batch file.
OTN

Similar Messages

  • 90201iDS_Win32.exe is not a valid Win32 application

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name -
    - Filename - 90201iDS_Win32
    - Date/Time - 16/10/2002, 09:00 pm (Download time approx)
    - Browser + Version - MS IE 6
    - O/S + Version - MS Windows XP Professional
    - Error Msg - "90201iDS_Win32.exe is not a valid Win32 application."
    Occurs after download of files, executing the bat file and then running (attempting to run) 90201iDS_Win32.exe. I have the same problem like you mentioned. Can you help me to fix it ?
    Friendly Greetings,
    Eric Strybos
    Belgium
    [email protected]

    HI DEAR ,
    KINDLY WOULD U LIKE TO TELL ME HOW DID U DOWNLOAD THE ABOVE 10 FILES FROM INTERNET, BECAUSE IT IS APPROX.850 MB FILES, AND IT IS SO MUCH TIME AND MONEY CONSUMING EVENT,,
    I HAVE HEARD ABOUT THE USING FTP CLIENT BUT I AM UNABLE TO UNDERSTAND HOW TO USE IT,
    I SHALL BE VERY GARTEFUL TO U FOR THE INFORMATION, PLZ TELL ME ABOUT THIS, PLZZZZZZZZZZZ.
    THANX
    [email protected]

  • ITunesSetUp.exe is not a valid iTunes Win32 application? (Windows 7)

    I just installed Windows Ultimate for Windows 7 on my computer after a new hard drive was installed. I downloaded iTunes 9.0 but when I clicked iTunesSetUp.exe
    I got the following error message:
    "iTunesSetUp.exe is not a valid iTunes Win32 application".
    What do I need to do to install iTunes 9.0?
    Thanks in advance,
    Dressy

    Try the instructions in this article.
    (22799)

  • Unwise.exe Files not run on Windows 8.1 SSSS

    So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
    what should i do?
    Reply Please!

    So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
    what should i do?
    Reply Please!

  • Error Message "not a valid Windows CE application?"

    Hi,
    I build an executable using PDA module and try to open it up on Pocket PC, but it says "FILENAME is not a valid Windows CE application" every time.  Can any one give me a pointer or two?
    Do I have to install a thing or two onto the Pocket PC system before doing anything?  I am using Windows CE .NET 4.2
    hellolv

    Hello,
    The best place to get
    started with the requirements is the datasheet.
    You can also find the information in the PDA module manual.
    I’m not convinced that
    a previous post was correct (http://forums.ni.com/ni/board/message?board.id=170&message.id=160316&requireLogin=False).  Have you seen this tutorial for Windows CE?
    I apologize for the confusion!  Please review these documents and let me know
    if you have any additional questions.
    Travis M
    LabVIEW R&D
    National Instruments

  • Error Message ABC is not a valid Windows 32 application

    I have an error message “ABC is not a valid Windows 32 application even the games are not working properly. This always occurs when open a file or program. Please suggest way to manage it. My systems configurations are Windows 7, 1GHz 32 Bit processor, 1
    GB RAM. 
    Help required.

    If this occurs for a certain executable, this indicates a corruption of the file, redownload or reinstall it. Perform a chkdsk.
    If this occurs on multiple executables,causes might include disk corruption/failure, memory corruption, malware infection,...
    Check if the issue also occurs in safe mode. http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 
    Run chkdks on the affected drive(s) ,run antivirus/antimalware and do (from an elevated prompt) sfc /scannow to scan for and repair system files.
    MCP/MCSA/MCTS/MCITP

  • Error installing itunes 7.0.1..itunes.exe is not a vaild win32 application?

    I have the latest verion of XP Pro but cannot install he itunes 7.0.1 i just receive this error message ?
    itunes.exe is not a valid Win32 application.
    Appreciate any support.
    best regards,
    tafta
    Compaq presario   Windows XP Pro  

    Hi Roy B
    The 7.1 just would not install at all, giving the error message above every time. 7.0 was still on my system.
    I did a disk clean up (someone said there might be fragments of my attempts to download 7.1 in temp folder that needed to be removed). I then ran a spyware scan and a full Norton system scan (just to be sure that I was 'clean' before attempting again). Then ran the registry mechanic that I just purchased and allowed this to 'fix' anything it found.
    Finally I then went back to apple.com and tried another install from scratch - which worked! So...one of the above things worked - can't be certain which, but my guess is that it might have been the reg. mech.
    7.1 has been working for a couple of days now... but dreading 7.2 etc...!
    Good luck sorting out your probs...
      Windows XP  

  • Forms 6i setup.exe will not run

    I am trying to uninstall Forms 6i from a PC (Windows XP) and the manual recommends doing it via the installer.
    However the installer (setup.exe) will not run. No error message, control just returns after double click.
    I am pretty sure this was how we originally installed Forms 6i but for some reason it does not run now.
    Tried a couple of things like turning DEP off, to no effect.
    Anybody has an idea where the problem is?
    Or should I just uninstall the hard way by deleting the folders and cleaning up the registry manually

    Hai,
    In The Properties of the setup file, there is a Tab Named Compatibility. In that tick the Run this program in compatibility mode for:
    and select the latest Operating system listed in the Combo box. (Eg: Windows 2000).
    and Press OK.
    then it will work.
    Regards,
    Manu.
    If this answer is helpful or correct, please mark it. Thanks.

  • Running 90201iDS_Win32.exe does not work for download of Dev. Suite

    I downloaded all the Developer Suite files for Windows and
    ran the file10.bat first then the 90201iDS_Win32.exe and
    received this message.
    G:\OracleDevStudio\download>90201iDS_Win32.exe
    This program cannot be run in DOS mode.
    How do i get this to run?
    thanks...sandy

    I downloaded all the files as well, and when I run the 90201iDS_Win32.exe file, a DOS window flashes but nothing happens. I saw someone else recommended changing the file to a zip file, but that only froze my computer. Anybody else having this problem?

  • Just installed PRO 7, is not working with Windows 8.1

    I just installed Acrobat Pro 7 on Windows 8.1
    Will not open any documents: "The application was unable to start correctly (0xc0000fd)"

    Not surprising, particularly if a 64-bit system. It needs to run in the 32-bit mode as a minimum. It may not run at all. I was successful with AA7 on Win7, both 32 and 64-bit systems. However, the Adobe PDF printer and AcroTray failed and a workaround was required. I only did it as a test and do not use that configuration anymore.

  • Sftdcc.exe does not timeout after closure of application launched via GP in kiosk mode.

    We are configuring a group policy to launch an application upon login to the Remote Desktop Server.
    The following group policy object is configured;
    User Configuration\Policies\Administrative Templates\Windows Components/Remote Desktop Services/Remote Desktop Session Host/Remote Session Environment
    By default, Remote Desktop Services sessions provide access to the full Windows desktop, unless otherwise specified with this setting, by the server administrator, or by the user
    in configuring the client connection. Enabling this setting overrides the "Start Program" settings set by the server administrator or user. The Start menu and Windows Desktop are not displayed, and when the user exits the program the session is automatically
    logged off.
    Start a program on connection - Enabled 
    Program path and file name "C:\Program Files (x86)\Microsoft Application Virtualization Client\sfttray.exe" /launch "universe 1"
    Working Directory
    This has also been tested running Notepad.exe
    The application launches successfully.
    Upon exiting the application the App-V client shuts the application down successfully but the RDS session does not log the user out or end the RDS session. The sftdcc.exe process
    does not timeout.
    Using Task Manager to end the sftdcc.exe process initiates the logout process.
    Is the following still valid for Server 2008 R2 and App-V v4.6 x64?
    Can’t find any reference to it via;
    http://technet.microsoft.com/en-us/library/dd464849.aspx
    How To Deal With Microsoft App-V sftdcc.exe when Sessions are not closed properly After installing Microsoft App-V for terminal servers
    users sessions are not closed properly after logoff. You can see through the Citrix Advanced Management Console that the session is in disconnected state and sftdcc.exe is running in the user session.
    There are two registry keys you can set for this problem to disappear:
    HKEY_LOCAL_MACHINE\Software\Softricity\SoftGrid Client\CurrentVersion\Configuration\
    Value Name: DCCSeamlessTimeout
    Type: REG_DWORD
    String: 0
     I have tried adding the DCCSeamlessTimeout to the HKLM\Software\Wow6432Node\Microsoft\Softgrid\4.5\Client\Configuration
    but this does not have any effect.

    Updates on this issue.
    if you are running window server 2008 R2 install this hot fix:
    KB2815716-v2-x64
    then add this registry values:
    reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\SysProcs" /v sftdcc.exe /t REG_DWORD /d 0
    reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\SysProcs" /v splwow64.exe /t REG_DWORD /d 0
    then reboot, and that will fix it.
    if you are running 2012 r2, then only add the registry values and reboot.
    Mohsen Almassud

  • Oracle 10g(10.2.0) installed successfully but is not working in Windows 7

    Hi,
    I have installed successfully oracle 10g client in windows 7. After making modification in refhost.xml file as :--
    <!--Microsoft Windows 7-->
    <OPERATING_SYSTEM>
    <VERSION VALUE="6.1"/>
    </OPERATING_SYSTEM>
    under </CERTIFIED_SYSTEMS>
    It worked for few days but now again i m not able to access the Client again. I checked out the file refhost.xml
    and noticed that the changes which i had made is present there.
    Please help me on this as due to this i am stuck in the middle of my work.
    Any suggestions regarding is higly appreciable !!
    Thanks & Regards,
    Amitanshu
    +91-9560720077

    839763 wrote:
    Thanks for your reply,
    As you asked i checked out the version detail of the 10g client its (10.2.0.1.0).
    From where can i download the patch 10.2.0.5 upgrade as you suggested. If you could share the link for
    the same. It would be really helpfull for me.
    Patches can only be downloaded from My Oracle Support - https://support.oracle.com - you will need a valid Customer Support Identifier (CSI), which is given when you purchase support from Oracle.
    Thanks & Regards,
    Amitanshu Rai
    +91-9560720077HTH
    Srini

  • When i installed oracle 10g am not able to start my application

    Hi all,
    Am using ATG 9.1 my application is running fine,but after i installed oracle 10g my Jboss is starting up but i could not run my application?
    It is saying that Requested Url cannot be found.......
    Could you please tell me why this happens..........
    Thanks in advance......
    Thanks&Regards,
    Sudhakar.

    This happens in oracle 10g because oracle 10g also uses 8080 as the default http port.
    And if your application server is also running on default 8080 port u ll see this issue.
    For resolving this, all you need to do is change the default 8080 port of oracle to some other port number.
    See the following link to change the port.
    http://daust.blogspot.in/2006/01/xe-changing-default-http-port.html
    After changing the port, restart your machine once and you should be able to access your application fine.
    ~Gurvinder
    Edited by: Gurvinder on Nov 6, 2012 1:08 AM

  • Error Message:  iTunes.exe is not a valid win 32 application

    I have downloaded ITunes twice for the shuffle received for Xmas. I got this error both time. Anyone have suggestions for a fix?

    Today I was able to download and install. Did nothing different. I deleted the original download and tried today with success

  • I recently installed Yosemite and since I have my Windows Parallels Application is not loading.  Can someone help?

    I just upgraded to Yosemite and I cannot open Parallels.  I am clicking on it and nothing happens.

    What version of Parallels are you using? I received a notice that 9 is compatible, but must upgrade to latest version. To take full advantage of Yosemite they recommended purchasing an upgrade to Parallels 10. I have the latest 9 version, with XP installed and it is working fine (if I must use Publisher!)

Maybe you are looking for

  • Applying an adjustment layer / or adjustment TO a layer in a grayscale image is NOT happening!

    I'm a long time user of Photoshop, but must admit to being stumped here. I have a very high resolution scanned image from a B&W antique engraving, and I'm trying to "open up" some of the lines to bring out the details in the engraved image while keep

  • How do I move photos from iPhoto to new PC or Mac?

    We are in the market for a new computer.  I want a Mac (of course!) but my husband and our budget are more comfortable with a PC.  My question is how do we move photos from our old Mac to a new comp?  Can it be done via a network?  I assume it is eas

  • Messages wont open because of webkit plugin

    I can still get notifactions, but the app wont open. Message was edited by: Adam Maj

  • Trying to publish a new iWeb site to mobileme

    My son is part of a family account I have and he is experimenting with creating a blog using iweb Is publisihing on Mobileme still supported? We are trying to publish but it's selling us to sign in (and we are signed in) and can't progress further I

  • Query advice

    I have an internet db designed as follows (scripts follow and the end of the post) table entities - different articles to be published to the internet table medias - media files upload to our site (may be of different types - audio, video, pictures,.