Forms installation

how to install oracle forms developer 10g in 9i database

Hi,
developer suite (with forms) has to be installed on your pc.
then you set up your <devsuite_home>\NETWORK\ADMIN\tnsnames.ora to access the database you want to use for your development.
What do you mean by installing in a 9i database?
Regards
JeanYves

Similar Messages

MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

How does the Forms Installer detect the platform?

The Forms Installer is detecting our Red Hat Enterprise Linux 6.3 system as "redhat-Red" and failing the prerequisite check on some systems.
Specifically, the installer is from ofm_frmrpts_linux_11.1.2.1.0_64_disk1_1of1.zip.
Other folks on Red Hat EL 6.3 systems show that the installer detects the system as "redhat-6".
Where is the installer getting the platform information? I have ruled out the following sources:
/etc/*release (redhat-release, system-release, system-release-cpe)
`uname -a`
`uname -r`
`lsb_release`
`cat /proc/version`
All of the above sources yield identical strings on systems that are detected as redhat-Red versus systems detected as redhat-6.
Is it a Java function? If so, where is it getting the information? Is it a parsing bug between Java 7 update 09 and Java 7 update 13?
I already know how to skip the prerequisite checks in the installer, but this also skips the automatic package verification, which we want to keep.
I've also resorted to editing the Disk1/stage/prereq/linux64/refhost.xml to manually change one of the approved platform versions from "6" to "Red" to fool the installer, but this seems like treating the symptoms when we'd prefer to treat the source of the problem.
Edited by: ibsteveog on Feb 4, 2013 1:15 PM

I think that rather than attempting to hack the installation, it might be a good idea to work with Oracle Support to fix the problem. It could be that this is an installer bug that needs to be corrected. Further, because this really isn't a "Forms" question, you might get better feedback if you post your question in the "Appication Server" area.
https://forums.oracle.com/forums/category.jspa?categoryID=193
If you decide to contact Support, I would recommend that you do it under Application Server, if that is an option. It is the AS Support team that generally handles installation issues.
If you want to force the installation, you may be able to override the acceptable list of platforms. Take a look at the environment variable SELECTED_PLATFORMS. This is an OUI variable that may help. I haven't been able to find much documentation on it, but it might be worth investigating
Edited by: Michael Ferrante (Oracle) on Feb 5, 2013 4:45 PM

Forms installation problem - how do I create a new default Oracle home?

I am new to Oracle so please forgive my utter ignorance. My impression of Oracle because of how an installation
has to be done is taking a nosedive. I thought Microsoft was bad with all the re-booting but the explanation that I
read in Anubhav Seth's post about installing Dev 6i before 8i and the suggestion (not a requirement) to format the
harddisk and reinstall Windows just leaves me with my jaw hanging open. I'm having a little trouble swallowing that
one.
Here's my situation... I'm running 8i at home and I am using it for the Oracle courses that I am taking at a local
university. So 8i with its SQL*Plus has been all I have needed to date. Now we have a project to do that involves forms.
So I go to the OTN page for downloads and downloaded file 6irel2nt.exe which is 264 MB in size. This file, I assume,
has forms in it -- what else I don't know because things are not explained all that well on the web site or I don't know
where to look (which implies poor organization of the web pages).
I run the 6irel2nt.exe file and end up with 11,128 new files on my computer. That's nice. I run the setup file and a step or
two into it it complains that my 'Ora81' home is already being used and that I need to install it into another Oracle Home.
Now I'm trying to find out how I create another Oracle Home. I perform a search in GOOGLE on "creat default Oracle
home" and basically get nowhere. My $50+ "Oracle 8i A Beginner's Guide" from Oracle Press mentions Oracle Home
on one page (pg. 170) but is completely useless in this case. My $184 worth of Oracle University manuals (which
are really PowerPoint slides) is useless too. My next step will be to comb through the FAQs. All this because I cannot
believe that I have to totally uninstall one product to get another to install and then reinstall the first one. That is INSANE!
If I have gone way off track please feel free to blast me but if this is true then all I can say is that the folks at Oracle need
a lesson in KISS (Keep It Simple Stupid)! Computers and computer software are supposed to make our lives simpler
not complicate the holy hell out of them. I'll get off my soapbox now. Sorry about the whining.

I ended up uninstalling 8i and then I installed Dev 6i (Forms) and then I reinstalled 8i. I had some problems
installing Dev 6i because of this error "path.vrf(86): Unbound variable 'path_too_long_prompt'". Right after this error
appears I get a dialog that states, "The Oracle Installer cannot update the system path variable to %new_path%
because it is too long. Please restrict your system path to 127 characters and make sure D:\Oracle\OraWin95\bin
is included in your path."
The path D:\Oracle\OraWin95 was what I set up for this installation.
What I did to work around this problem was this...
(1) Go to Start - Accessories - System Tools - System Information.
(2) Click on the Tools menu
(3) Select System Configuration Utility
(4) Select the Autoexec.bat tab
(5) I added D:\Oracle\OraWin95\bin to my PATH variable and unchecked the checkbox next to one of the several
lines that I have that build my PATH variable. (I have several PATH lines that simply add a path to the system
variable %path%). After the installation is complete you can go back and turn back on the paths that you had disabled.
After installing 8i I did have a problem connecting to the database. I got this error:
Error: ORA-01034 Oracle not available
I believe this happened because I had forgotten to turn back on some of my PATH information that I mentioned
earlier. After checking one of my PATH variables and rebooting, this problem disappeared.
When reinstalling 8i and when the installation asks for an SID and you enter the SID you had used in the original
installation you may get a notice that says the SID already exists. I think this happens because the uninstall does not
clean up the registry totally, so I entered a different one. Later on, after the installation has been completed and you
are connecting to your database, you will be prompted to select an SID -- just make sure that you select the SID from
the latest installation.
I should've mentioned first that in preparing for this whole ridiculous exercise I created a directory under my Oracle
directory that I was going to use as the new 'Oracle home.' So I guess that's all one has to do to create a new Oracle
home -- just have another directory ready to install 'stuff' into.
All in all, this a pretty asinine exercise. Oracle really needs to fix this mess. I honestly thought Microsoft was bad but
this takes the cake. I wonder if SQL Server is this screwed up.

Oracle Forms Installation

Hi All,
I have a basic doubt regarding the installation of Oracle Forms & Reports. I already have an Oracle 10g database installed on my system, now in my trial for installing Oracle Forms and Reports, I am downloading the Oracle Developer suite 10g for Windows, I hope which contains both Oracle database, as well Forms & Reports. Does this mean I have to remove the existing Oracle database on my system, and then reinstall everything freshly, or can I go ahead with only installing Forms & Reports directly..
Please guide me.
Thanks!!

Hi All,
Thanks for your input. I successfully installed Oracle Developer Suite on my system. Here, I have one more question, I already have JDeveloper 10g executable on my system, and with this installation I have two JDeveloper components. I will anyway delete the first one, rather uninstalling it, as it is only a executable file.
My question is whether this JDeveloper along with Oracle Developer suite an executable file or an installation? coz, had it been only an executable file I can install JDeveloper 11g on my system and have both versions running. If this JDev 10g is an installation file, then how can i install JDeveloper 11g on my system? I mean, can I now install JDeveloper 11g separately?
Many Thanks!!

Best Practices for BI, ADF and Oracle Forms installations on Weblogic

Hi, I'm researching options on upgrading to Oracle 11g Middleware. My company currently has Oracle Forms 10g running on Oracle Application Server.
We are interested in using Oracle Forms 11g, ADF and Jdeveloper, and Business Intelligence with Oracle's Weblogic 10.3.5.
Is there any whitepapers or documentation on best practices for installing alll of these components together?
For instance, can ADF ( with JSF 2.x ) be installed in the same domain as Oracle Forms 11g but use different managed servers?
Will Business Intelligence need to be in a seperate Oracle Home with it's own weblogic installation? I spend a lot of time trying to get the JSF upgraded to 2.x in the Business Intelligence installation and could not get it to work.
I know it's a pretty broad question but thank you for any direction on this.

Thanx for the reply! I read through the documents and they are very good at explaining how to install the different components individually. I still can't find much on installing them together. I hope it's not just going to be a trial and error thing.
So far I've installed done the following successfully:
Installed 10.3.5 weblogic
Forms and Reports 11g on top of 10.3.5
I've created an additional managed server for our ADF applications.
My next step is upgrading the JSF to 2.x. I would have to stage patches 12917525 and 12979653. I'm afraid it will break the forms and reports though. Any ideas?

Is it possible to use an answers file to automate oracle Forms installation

Hi
We want to install Forms 6i and the Open Client Adapter on several hundred pcs. We can't do it remotely as the pcs are not on our domain.
Is it possible to set up an automatic install of the components that we need so our desktop staff don't have to select the components/Oracle home etc on each install? Can an "answers file" be used to achieve this?
thanks
Paul Schweiger

Ok well I won't argue with that then :)
You may be able to create a custom installation - I did this with the Oracle ORCA package many years ago. I'm not sure whether you can do this sort of thing with the universal installer ... not sure which version 6i uses !
http://download-uk.oracle.com/docs/cd/A91202_01/901_doc/em.901/a88812/oui.htm
Message was edited by:
spilgrim

Forms Installation Doc Urg!

Dear All,
Needed Installation doc of Forms 6i Developer on RedHat Linux AS 2.1 (32-bit)Its urgent
Thanks in advance
Regards
Praveen Maddi.

I have the part numbers for the following docs. Would one of them be the one you need?
Oracle Forms Server and Reports Server Installation Guide Release 6i for LINUX
A83546-01
Oracle Forms Developer and Reports Developer Installation Guide Release 6i for LINUX
A83547-01
Oracle Forms Developer and Forms Server 6i (Patch 4) Release 6.0.8.13 for AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and LINUX Intel
A90460-01

Oracle forms installation - some help need

I am trying to install Oracle forms - but get the follwing message:
Checking swap space: 576 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
actually - I have no choice to choose y and try what's going on - so - is this means that I shoul add some 1.5 GB of RAM to my computer? (I have already 700MB, only 300 of them are used)? I am using WinXP, free HD is above 3.5 GB, 2.4GHz processor.
Can I try to find some workaround - e.g. simply try to copy jar's from 'stage' (direcotry in installation disk) in Oracle application server's lib directory (where it is in Oracle_Home directory?)?
Any experience with installing Oracle forms?
This was trying to run setup.exe, but when I am trying to run wsf.exe - I get:
SEVERE: Unable to locate the MDAC Update Status registry key value, probably because the installation was aborted.
MDAC possibly stands for Microsoft Data Access Components? If so - where is problem - I can run a lot of DB servers, including Oracle server itself normally?
BTW - is there any free service available for Oracle Forms skills development (e.g. as for Oracle SQL the Intel test drive is available?)
user454720

OK - now I increased the max limit of my page file and now I achieved this:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: must be greater than 1535 MB . Actual 1600MB Passed
Checking Temp space: must be greater than 150 MB . Actual 1942 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2006-03-18_01-57-43PM. Please wait ...
however - after this I receive the standard messgae:
'setup.exe has encountered a problem and need to close. we are sorry for the inconvenience..... Please tell Microsoft about thsi problem'
actually - I have little ideas what to do further - maybe I should look for other Oracle Installer version? I am using:
Oracle Universal Installer version: 10.1.0.2.0
and I am trying to install
Oracle Deveoper Suite: 10.1.2.0.2 (so - a bit higher)
I can run OUI without any problems, my Default JRE is 1.5_1 - so - all seems to be OK?
Please - if any idea - help me :))
Thanks in advance!

Oracle Forms Installation Problem

I am trying to install Oracle Forms Server on my computer but when I get part way into the installation I get the error message that I must stop all Oracle Services and Applications using NET8 for the NET8 installation to be successful. All my Oracle are services are stopped and I am unable to complete the installation.
Can anyone help?

Hi!
The PC which I was trying to install already Windows XP and Oracle 9i got installed. Then I was trying to install Forms6i. First I clicked the Forms6i installer and then selected the required products(I was trying to install thru custom) and then clicked 'Install'. Thats all everything disappeared. I again tried the same procedure, but everytime after I select the products and click the 'Install' nothing I could see.
I found in some forums that for Windows XP, I need to patch Patch13 or above. But without installing Forms6i how I can patch the Patch13? I found one more solution from forums that I need to reinstal Oracle9i(Oracle9i has to be installed after installing of Forms6i,preferably in a separate drive than Forms6i). As my user has time restriction I can't do this.
I am not sure these two solution may really workout or not. So can anybody help me, what I should do now? How to install Forms6i without deinstalling Oracle9i.
Thanks in advance

Oracle 11g forms installation

Hi,
I have installed the Oracle forms 11g on my machine and tested the test.fmx file and is running with out any problems. I have installed Oracle weblogic 10.3.2 and then downloaded the forms 11g version (4 zip files from oracle site) and installed only forms and reports components.
When I am going through the forms deployment guide, in the documentation it is specified that the configuration files are located in *<DOMAIN_DIR>/servers/WLS_FORMS/stage/formsapp/11.1.1/formsapp/config* folder. But I am unable to find the configuration files in that folder. I can find the configuration files in the following folders.
<DOMAIN_DIR>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config
<DOMAIN_DIR>\servers\AdminServer\tmp\.appmergegen_1260317776409_formsapp.ear\config
<DOMAIN_DIR>\servers\WLS_FORMS\tmp\_WL_user\formsapp_11.1.1\wb1h9e\config
Can I assume *<DOMAIN_DIR>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config* folder is correct configuration folder for forms configuration.
I did not find any error messages while the installation and also the test.fmx is running with out any problems. Could you please advise about the correct configration if the configuration files are not correct.
Thanks and Regards,
S R Prasad

hi
u have to do something like this.
Perform the below steps to install Oracle Forms 11g and forms services on Windows.
- Download Oracle Weblogic server (Navigation: otn.oracle.com > downloads > Middleware: Weblogic server )
- Download Oracle Forms, Reports and Discoverer (Navigation: otn.oracle.com > Downloads > Middleware: Oracle Fusion Middleware 11gR1)
- Extract the two files Disk1_1of2 and ..disk1_2of2 and it creates disk directories (disk1, disk2, disk3 and disk4).
- Double click the setup.exe in the root of the disk1 folder.
- Click install and configure.
- The installer checks for System pre-requisites.
- Choose the Oracle Middleware location. This is where I installed the middleware home of Jdeveloper 11g
- Select Oracle Forms and Reports including the correct server components. And after accepting the defaults in the following steps choose [Finish] and the installation starts.
- The installer installs a one- off patch and then starts the configuration.
- Add TNS entry for the instance in tnsnames.ora under ([HOME_DRIVE]:\Oracle\Middleware\asinst_1)
- The forms builder can be accessed from the following menu (Start > Programs > Oracle classic instance > Developer tools > Forms Builder.)sarah

D2k forms installation problem.... plz help me soooon

hi i installed d2k forms 6i for windows xp(sp2). but it doestnt connect to the database. how can v connect the database?
if i work with sql, do i install oracle 8i seperatly? or directly i can u se sql and plsql directly with only using d2k cd?
please post the complete installation guide for D2k(forms 6i)..................reply me sooon plzzzzzzzzzzz

In addition to the previous posting, remember that Forms 6i installs 8.0.6.3 Net 8 compatible tnsnames.ora and sqlnet.ora files by default. These files are not compatible with 9i and higher version of database servers. Do binary ftp the tnsnames.ora and sqlnet.ora from your database server to the directory where you specify by setting the TNS_ADMIN. If none set, then the default directory is the one under the 6i installation. If you don't want to set TNS_ADMIN, then replace the ones under 6i/network/admin directory with the ones you ftp from your db server.
I hope this proves useful.

Forms installation....ERROR

Hello All!
I have just installed Oracle 8i (8.1.6) on windows XP, I created a new database called "Test" too.But I am unable to install Forms 6i..the error it gives is "ORAINST.EXE has encountered an error" and it closes the install program.does this have anything to do with the DB being created? Could anybody walk me thru this proces?? HELP!
Thanks!

Hi,
I am facing the same problem, however with one major difference. I installed Personal Oracle 8.1.7 and was able to install Forms 6i successfully and was able to connect to the database. However, I could not install Discoverer and was getting the orainst.exe error - mod oibknd32.dll. I deinstalled Forms 6i and tried to install Discoverer, but with no luck. Now I am unable to install Forms 6i back.
The only changes made from the time I first installed Forms 6i and now, is that I downloaded and installed all the security patches that Microsoft came up with for Windows XP.
Hope someone can help.
TIA
Ramesh

IDEAs Required......Forms Installation Problem

I recently installed Oracle 8.1.6..(exists in c:\Oracle 81 directory).when I tried to install Forms6i it installed a copy of SQL+ (Why???)in c:\orant and installed forms in c:\orant\forms_home.
**Previously I was able to connect to Oracle and work with SQL+ but now neither can I work on SQL+(gives an error <lang>.MSB file not found) nor am I able to connect thru Forms (gives TNS adapter error).....Neither FOrms nor SQL+ are working now.
** I am unable to start the LISTENER
** I am unable to run NET 8 Config
** How do i go about solving all of the ablove problems? (connect to DB and get everything working??)
**If I un-install FOrms6i and re-install will it help?
Ideas and Help required.
Appreciate any help!
Sandhya

The TNSNAMEs file looks like this....
Beq-local.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = beq.world)
(PROTOCOL = BEQ)
(PROGRAM = oracle73)
(ARGV0 = oracle73ORCL)
(ARGS = '(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')
(CONNECT_DATA = (SID = ORCL)
)

Problems Post installation - Oracle 8i and Forms 6i

Hello,
This is with respect to the two issues I am encountering in Oracle. Kindly somebody help with these issues as it is urgent.
PLEASE GO THROUGH EACH AND EVERY POINT BEFORE ARRIVING AT A CONCLUSION
1. With the Post Oracle database installation
2. Oracle forms connectivity to the Oracle database (FORMS WAS INSTALLED PRIOR TO ORACLE INSTALLATION)
I will start with the 1st issue (Post Oracle database installation)
Steps A01
1. I unistalled an existing version 8.1.7 using the steps mentioned in the following link (http://www.oracle-base.com/articles/misc/ManualOracleUninstall.php)
2. I chose typical installation (default, all the rest of installation methods were default)
3. Gave SID as ORCL_DB
4. Created database by installation
5. connected to SYS using default password - no problem
6. Created another user usr01 and granted necessary privileges Was able to logon to the database using usr01. No problem
But if I do a restart of the machine and then I am encountering an error ORA-27101: shared memory realm does not exist after which I am unable to connect to the database.
##### (PLEASE NOTE THAT I AM ABLE TO CONNECT TO ORACLE FOR THE FIRST TIME WITHOUT ANY PROBLEMS. THE ERROR IS THROWN IF WE REBOOT THE MACHINE AND TRY TO CONNECT TO ORACLE) ###
The steps I tried to troubleshoot this
a. Checked the oracle network admin directory. All the config files are there (TNSNAMES.ORA, SQLNET.ORA, LISTNER.ORA)
b. did a tnsping
c:\tnsping ORCL_DB
NO PROBLEM WITH THAT. GETTING OK FOR THE PING
c. Checked the oracle registries.
Could find all these entries have the correct value:
ORACLE_HOME - C:\ORACLE
ORACLE_SID - ORCL_DB
ORACLE_BASE - c:\oracle
There were no extra slash or extra character with the registry entries.
Now the the post forms installation scenario
Steps A02 (FORMS WAS INSTALLED PRIOR TO ORACLE INSTALLATION)
1. Installed forms (directory c:\orant)
Steps A03
1. Copied the contents tnsnames.ora file entries from oracle\network\admin directory to the orant\net80\admin\tnsnames.ora file
2. Tried to connect to oracle forms (user : usr01, database : ORCL_DB).
Got error : ORA-12154: TNS:could not resolve service name
3. Created an environment variable : tns_admin with value c:/oracle/network/admin. Tried to connect again
Now getting another error : unable to connect to the destination : ora-12203 (unable to connect to destination)
I have installed forms and oracle in separate directories. Can somebody help to resolve these issues?
Thanks in advance
Chanaya

Please find the content of the alert logfile
Dump file C:\oracle\admin\PPDDEV\bdump\ppddevALRT.LOG
Fri Nov 04 17:47:05 2011
ORACLE V8.1.7.0.0 - Production vsnsta=0
vsnsql=e vsnxtr=3
Windows 2000 Version 5.1 Service Pack 3, CPU type 586
Starting up ORACLE RDBMS Version: 8.1.7.0.0.
System parameters with non-default values:
processes = 150
shared_pool_size = 52428800
large_pool_size = 614400
java_pool_size = 20971520
control_files = C:\oracle\oradata\PPDDEV\control01.ctl, C:\oracle\oradata\PPDDEV\control02.ctl, C:\oracle\oradata\PPDDEV\control03.ctl
db_block_buffers = 19200
db_block_size = 8192
compatible = 8.1.0
log_buffer = 32768
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
db_files = 1024
db_file_multiblock_read_count= 8
max_enabled_roles = 30
remote_login_passwordfile= EXCLUSIVE
global_names = TRUE
distributed_transactions = 500
instance_name = PPDDEV
service_names = PPDDEV
mts_dispatchers = (PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)
open_links = 4
sort_area_size = 65536
sort_area_retained_size = 65536
db_name = PPDDEV
open_cursors = 300
os_authent_prefix =
job_queue_processes = 0
job_queue_interval = 10
parallel_max_servers = 5
background_dump_dest = C:\oracle\admin\PPDDEV\bdump
user_dump_dest = C:\oracle\admin\PPDDEV\udump
max_dump_file_size = 10240
oracle_trace_collection_name=
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Fri Nov 04 17:47:07 2011
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Fri Nov 04 17:47:08 2011
create controlfile reuse set database PPDDEV
datafile 'C:\oracle\oradata\PPDDEV\system01.dbf',
'C:\oracle\oradata\PPDDEV\temp01.dbf',
'C:\oracle\oradata\PPDDEV\rbs01.dbf',
'C:\oracle\oradata\PPDDEV\indx01.dbf',
'C:\oracle\oradata\PPDDEV\tools01.dbf',
'C:\oracle\oradata\PPDDEV\dr01.dbf',
'C:\oracle\oradata\PPDDEV\users01.dbf'
logfile 'C:\oracle\oradata\PPDDEV\redo01.log' size 1M,
'C:\oracle\oradata\PPDDEV\redo02.log' size 1M,
'C:\oracle\oradata\PPDDEV\redo03.log' size 1M resetlogs
Fri Nov 04 17:47:12 2011
Successful mount of redo thread 1, with mount id 1145344671.
Fri Nov 04 17:47:12 2011
Completed: create controlfile reuse set database PPDDEV
dataf
Fri Nov 04 17:47:12 2011
alter database PPDDEV open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 282235
Fri Nov 04 17:47:12 2011
Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Nov 04 17:47:12 2011
Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Nov 04 17:47:12 2011
Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Fri Nov 04 17:47:14 2011
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
Successful open of redo thread 1.
Fri Nov 04 17:47:14 2011
SMON: enabling cache recovery
Fri Nov 04 17:47:15 2011
Dictionary check beginning
Dictionary check complete
Fri Nov 04 17:47:15 2011
SMON: enabling tx recovery
Fri Nov 04 17:47:31 2011
Completed: alter database PPDDEV open resetlogs
Fri Nov 04 17:47:31 2011
alter database PPDDEV character set WE8ISO8859P1
Fri Nov 04 17:47:31 2011
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
Thread 1 advanced to log sequence 3
Current log# 3 seq# 3 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG
Thread 1 advanced to log sequence 4
Current log# 1 seq# 4 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 1 seq# 4 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
Thread 1 advanced to log sequence 5
Current log# 2 seq# 5 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
Fri Nov 04 17:47:40 2011
Completed: alter database PPDDEV character set WE8ISO8859P1
Fri Nov 04 17:47:40 2011
alter database PPDDEV national character set WE8ISO8859P1
Completed: alter database PPDDEV national character set WE8IS
Fri Nov 04 17:47:40 2011
alter database rename global_name to "PPDDEV"
Completed: alter database rename global_name to "PPDDEV"
Fri Nov 04 17:47:40 2011
Restarting dead background process EMN0
EMN0 started with pid=11
Fri Nov 04 17:47:43 2011
Shutting down instance (normal)
License high water mark = 1
Fri Nov 04 17:47:46 2011
ALTER DATABASE CLOSE NORMAL
Fri Nov 04 17:47:46 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Fri Nov 04 17:47:48 2011
Thread 1 closed at log sequence 5
Fri Nov 04 17:47:48 2011
Completed: ALTER DATABASE CLOSE NORMAL
Fri Nov 04 17:47:48 2011
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
archiving is disabled
Starting up ORACLE RDBMS Version: 8.1.7.0.0.
System parameters with non-default values:
processes = 150
shared_pool_size = 52428800
large_pool_size = 614400
java_pool_size = 20971520
control_files = C:\oracle\oradata\PPDDEV\control01.ctl, C:\oracle\oradata\PPDDEV\control02.ctl, C:\oracle\oradata\PPDDEV\control03.ctl
db_block_buffers = 19200
db_block_size = 8192
compatible = 8.1.0
log_buffer = 32768
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
db_files = 1024
db_file_multiblock_read_count= 8
max_enabled_roles = 30
remote_login_passwordfile= EXCLUSIVE
global_names = TRUE
distributed_transactions = 500
instance_name = PPDDEV
service_names = PPDDEV
mts_dispatchers = (PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)
open_links = 4
sort_area_size = 65536
sort_area_retained_size = 65536
db_name = PPDDEV
open_cursors = 300
os_authent_prefix =
job_queue_processes = 4
job_queue_interval = 10
parallel_max_servers = 5
background_dump_dest = C:\oracle\admin\PPDDEV\bdump
user_dump_dest = C:\oracle\admin\PPDDEV\udump
max_dump_file_size = 10240
oracle_trace_collection_name=
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
SNP0 started with pid=8
SNP1 started with pid=9
SNP2 started with pid=10
SNP3 started with pid=11
Fri Nov 04 17:47:56 2011
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Fri Nov 04 17:47:57 2011
alter database mount
Fri Nov 04 17:48:04 2011
Successful mount of redo thread 1, with mount id 1145346003.
Fri Nov 04 17:48:04 2011
Database mounted in Exclusive Mode.
Completed: alter database mount
Fri Nov 04 17:48:04 2011
alter database open
Fri Nov 04 17:48:04 2011
Thread 1 opened at log sequence 5
Current log# 2 seq# 5 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
Successful open of redo thread 1.
Fri Nov 04 17:48:04 2011
SMON: enabling cache recovery
SMON: enabling tx recovery
Fri Nov 04 17:48:05 2011
Updating character set in controlfile to WE8ISO8859P1
Completed: alter database open
Fri Nov 04 17:48:20 2011
Thread 1 advanced to log sequence 6
Current log# 3 seq# 6 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG

Forms installation

Similar Messages

Maybe you are looking for