Forms page opens very slowly for single user

Hi ,
We have a user in our EBS environment names OPERATIONS under which all scheduled custom concurrent programs run.
The problem is it takes a long time just to open the forms page when I login as operations user , but when i login via other users such as sysadmin, the forms page opens very quickly.
Any particular reason for it ?
EBS 11.5.10.2
DB 11.2.0.2
Thanks
Vicky

Hi,
One reason which i can see is:
Since you said all the concurrent programs are running under this user name, I presume MOAC. is set for all the Org's for this user and as a result when the form is opened it has to fetch data for all the Org's for this users, whereas for other users it might be fetching data only few Org's.
How to confirm this:
1. Please enable the FND:Debug log for this users and check the data for MOAC assignment.
2. Repeat the same steps for a different user and compare the Org's initialized.
Hope it helps!!
Regards,
Yuvaraj.C
Edited by: Yuvaraj.C on Feb 15, 2013 3:57 AM

Similar Messages

Many web pages open very slowly on mac using yosimite

Some pages open fairly quickly. But, I have recently found that many pages take minutes to open.

Hi
What are the codes in the DNS box?
The Network panel for Leopard is different than Tigers. In your instance the solution is also a bit different. Follow these steps:
Go to the System Preferences>Network panel
-Location - set up a personal location by clicking on the location drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
-Next, click on the "Show" drop down menu and select Network Port Configurations. Depending on whether you use Ethernet or Airport (wireless) for your setup: only Ethernet or Airport ought to be checked. Move it to the top of the list (you can drag it). Select "apply". Everything else ought to be unchecked unless you use a Bluetooth device.
-Back to the "Show" menu, select either "Ethernet" or "Airport" (whichever applies to you). Click on the TCP panel. There, if you live outside the US enter 208.67.222.220 and 208.67.220.222 (separate lines) in the DNS servers box - these are Opensource DNS codes. and select "apply". If you live in the US use Verizon's 4.2.2.1 and 4.2.2.2 public codes instead of the OpenDNS codes.
Hope that helps.
Message was edited by: Hawaiian_Starman

Pages open very slowly.

Doesn't occur every time, but seems to be chronic when opening multiple tabs.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check for problems with the history and possible issues with the places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Web pages open very slowly. all virus and firewall protection etc. up to date

All virus scans and firewalls are up to date. Computer registry recently cleaned. But it takes a long time to open web pages. Mozilla itself opens quickly.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Restore the default home page
* https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
* go to Tools Menu -> Options -> Content -> place Checkmark on '''Block Pop-ups windows''' -> click '''Exceptions...''' button and click '''Remove All'''
* go to Tools Menu -> Options -> Privacy -> '''Firefox will: select Remember History'''
* go to Tools Menu -> Options -> Security -> place Checkmarks on ---> (1) Warn me when websites try to install add-ons (2) Block Reported Attack Sites (3) Clock Reported Web Forgeries
* go to Tools Menu -> Options -> Advanced -> General -> Remove Checkmark from '''Warn me when websites try to redirect or reload the page'''
* go to Tools Menu -> Options -> Advanced -> Encryption ---> under '''Protocols''' place Checkmarks on -> (1) Use SSL 3.0 (2) Use TLS 1.0 ---> under '''Certificates''' select '''Ask me Every Time'''
* click OK on Options window -> Restart Firefox
Check and tell if its working.

IBooks Author: in exported file, one page loads very slowly...

iBooks Author: in exported file, one page loads very slowly and drags when scrolling through pages, almost stopping the scroll. I have never seen this problem before with photo pages. Normally they scroll just as smoothly as text pages.
I have tried rebuilding the page with more compressed files to no avail. The image files used on the page are not any bigger than others I have used previously without any problem.
I have tried restarting my iBook.
I am using a template that I have modified quite a bit. The templates currently offered by Apple and third parties are not even close to what I am looking for in terms of layout, so I have to rip almost everything out of the page and start with a blank page, most of the time. I tried modyfying the layouts to save time and then saved as a new template. Apple really needs to add a module to create your own template at the beginning of a project. Or they need to create one very open template, without much on the pages.

I finally solved the problem by using an unmodified template. I would still like to know how my modifications to the other template caused the problem, but for now it remains a mystery. Thanks for your ideas.
Next I will try modifying the template without saving it as a template (merely saving it as a file) to see if I can get away with my modifications. Also I will make fewer modifications.
Slowly but surely I am learning this program by trial and error. Each time I try a few formatting variations, output an iBooks file, and open it on my iPad. I have probably done 20 of these tests, so far. Once I work out every detail of the design and structure, I will build the final book. I am lucky to have a beautiful PDF of the hardcover version, generously provided by my publisher. This not only sets a high bar for me, but also allows me to use some of their design elements via screen capture.
iBooks Author has great potential, but I along way to go to get there. One feature I would really like to see in the next update: the ability to add a hidden caption to a photo. The reader would tap the image and the caption would appear. Tap again and it disappears.

Appleworks is opening very slowly

For some reasson Apple works is opening very slowly. It some timetimes takes 10 minutes to open. Any suggestions. I tried reinstalling it but it is doing the same thing. I am using the updated version of 6.2.9.
Thank you.
George Wise

Welcome to Apple Discussions George
This is known as the "Recent Items bug." There are three user tips on what it is & how to deal with it:
Dale Gillard - AppleWorks slow? Spinning ball appears?
Dale Gillard - Recent items not visible/updated
Yvan Koenig - No More Recent Items
Peggy

Screenshots opening very slowly

i changed my settings so that my screenshots are now pdf's as opposed to the png garbage, but i have noticed they open very slowly. on my older macs, screenshots opened instantaneously almost, and now there is a few seconds of lag.
anyone noticed this?

Welcome to Apple Discussions George
This is known as the "Recent Items bug." There are three user tips on what it is & how to deal with it:
Dale Gillard - AppleWorks slow? Spinning ball appears?
Dale Gillard - Recent items not visible/updated
Yvan Koenig - No More Recent Items
Peggy

Photoshop opens very slowly ...

Heyo Community!
First of all, my english is bad so maybe you find the sense of my sentences...
my problem:
Photoshop CS3 opens very slowly. Not the programm, i mean the files. When i make FILE -> NEW and make my setting and press OK it takes about 45 seconds to 1 minute to make the new file.
When the file is open, it works normal till i want to make the next file.
anyone maybe has a solution for my problem?
thx forward Mario

This is a known bug and has been reported many times in the forum.
The solution, weird as it sounds, is to make a "generic printer driver" your default printer. If you don't have one, download it here:
http://www.adobe.com/support/downloads/product.jsp?product=pdrv&platform=win
All part of the fascinating world of Photoshop CS3.

Init: can't exec /bin/sh for single user.....

Has anyone come across this gem during start-up? it's outputting
init: can't exec /bin/sh for single user: No such file or directory
init: can't exec /bin/sh for single user: No such file or directory
init: can't exec /bin/sh for etc/rc: No such file or directory
This shows up after the apple logo on start-up. Any ideas?

That message suggests that Mac OS X isn't able to open a shell or run the startup scripts because one of the items it needs is missing. Fixing this issue will require reinstalling Mac OS X.
(11150)

Dynamically show/hide pages in a workset for special users at runtime

Hi all,
I want to create a workset that contains pages for different countries. The portal users should only be able to see the countries where they do business. I also would like masterdata from R/3 to drive the display of content on the portal.
- Is there a way how I could dynamically show/hide certain pages of the workset for the specific users?
- Would this showing/hiding of pages affect the workset for all users or only the instance for the specific user?
- Would there be a difference when I want to dynamically show/hide iviews in a page instead of showing/hiding pages in a workset?
Thanks a lot in advance.

Hi Timo,
Check out the article located at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/portal_content/filtering role and workset content.htm
It talks to exactly what you're trying to do. I'd imagine you could extend this simplistic example to have the service pull the users country from his/her master record in R/3 and set their filtering expression accordingly.
Hope this helps,
Marty

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

After updating to Acrobat PRO 9.5.2 PDFs open VERY Slowly

I am using Acrobat PRO on a workstation (Windows 7 Ultimate - Service Pack 1)
After updating to Acrobat PRO 9.5.2, all pdf files open VERY slowly (30-60 secs). It does not appear to matter if the file is local to the workstation or on the network. Also the size of the file does not seem to matter or whether this is the first file opened or a subsequent file.
In addition just opening Adobe Acrobat is equally slow.
I have tried turning off the anti-virus software. No impact.
Any suggestions appreciated...

Have you tried "Repair Acrobat Installation" to see if it makes any difference? To do this try this:
Help >> Repair Acrobat Installation.
Another option is to press the shift key while clicking or double clicking on the PDF file to open. this stops loading all the useless fonts in the document and other useless plugins in acrobat.
The third option is to delete the registry key that appears to be corrupted . However, if you nothing about registry keys, then you can't do it unless your company systems people can help you. The registry entries are:
HKEY_CURRENT_USER \ Software \ Adobe \ Acrobat Reader
HKEY_CURRENT_USER \ Software \ Adobe \ Adobe Acrobat
It is a question of renaming them while you have exited from acrobat. Once this is done, restart the system and start/launch the acrobat and the fresh keys will be generated. PLEASE NOTE: DON'T DO THIS UNLESS YOU HAVE THE HELP OF YOUR SYSTEMS PEOPLE IN YOUR COMPANY.
Hope this helps.

Can't exec /bin/sh for single user

Hi,
When I boot up my iMac G5 it sits on the gray screen with the apple and spinning "doing something" icon, and then goes to a terminal window telling me:
"can't exec /bin/sh for single user: Input/output error"
It started doing this last night after multiple beachball of death situations. Anyone have any ideas? Or is it time for this old machine to be put out to pasture?
Thanks
Mungo

Hi Mungo,
invalid key length is a serious issue that can sometimes be fixed by "heavy duty" utilites like DiskWarrior and Drive Genius.
If you don't have enough room to re-install the OS, though, you have seriously overfilled it and they may not be able to deal with the problem either.
You should always aim to keep at least 15% free space on the drive, preferably more. On my 250 Gig internal drive, for example, I see the beginning of stability and speed problems when I get down to below around 30 gigs of free space. It varies a bit depending on what you use your Mac for, but my own preference is to always aim for 50 Gigs free on this 250 Gig drive.
You have to fix the "keys out of order" problem before you even think of re-installing the OS.
The best solution is to reformat the drive. It is unlikely that it actually needs replacing. However I still think you should buy another drive, but an external one, if you don't have one already.
My approach to your problem would be:
1) Go and buy a nice big external firewire drive if you don't have one already (ideally at least twice the size of your internal).
2) Install OSX on the external drive (You may want to partition it into two volumes first, keeping one partition to store a "cloned backup" of your internal and one for general usage, overflow storage, etc)
3) Boot from the external HD and copy across your precious stuff from the internal drive to the external. (If you have created two partitions on the external you could use the excellent utility "SuperDuper" to "clone" the internal to the second partition - the one witout the OS installed on it)
4) Reformat the internal drive, preferably using the single "zeroing" option.
5) Re-install the OS and software on your internal drive
6) Copy back your data (documents, music, movies etc) to your internal but make sure you leave plenty of free space on it. If you have a large music library , or lots of movies, for example, you might want to keep them on the external, rather than putting them back)
7) From now on use one partition of your external drive for regular "cloned" backups of the internal and the other for general storage overflow etc.
Cheers
Rod

Change NWA language for single user

Hello, gurus!
The question is stated above: how can I change NWA interface language only for single user?
Users in our BPM system are fetched from Active Directory therefore I cannot change (as they advise) user for my user from NWA. It is inactive.
Is there any other solution?

It shows that users are stored in LDAP.
Also I'd like to draw your attention to language preferences in my browser
Desirable language (English) is specified as recommended in guidelines, but NWA nevertheless is showed in Russian as you can see.

Forms page opens very slowly for single user

Similar Messages

Maybe you are looking for